d5a1cbdaea
Add parameter to enable/disable all disturbances
2020-01-21 15:46:34 +01:00
b2ed7cbd63
Add accelerometer to the stewart platform
2020-01-20 17:21:11 +01:00
c5bb46c184
Add flexibility to the sample
2020-01-16 11:49:29 +01:00
6356b40f5f
Add Z-axis accelerometer and geophone subsystems
2020-01-16 11:49:13 +01:00
3367cabc70
Work on tomography experiment with active damping
2020-01-15 16:23:40 +01:00
1889b1be5c
Update some Simscape models
2020-01-13 16:05:19 +01:00
a2917a50e9
Use new argument function validation technique
2020-01-13 11:46:51 +01:00
623d2d7a26
Rework the motion input of some simscape models
2019-12-18 09:16:29 +01:00
c6a4e5343e
Important change for the implementation of motion input
...
Now we provide the first and second derivatives.
This permits to not have any motion error.
Also, many experiments (tomography, ty-scans) are simulated
2019-12-17 18:03:21 +01:00
65e246ff4c
Add flexible hexapod initialized in the wanted configuration
...
Change the tomography experiment simulation
Add simulink "matlab function" to compute the position error
2019-12-17 08:28:20 +01:00
b4180feded
Tomography Experiment with and without disturbances
2019-12-13 19:07:54 +01:00
27055d8f24
Update the disturbance analysis
2019-12-13 16:40:46 +01:00
73a3735f19
Modal Analysis of the Micro Station
...
The Center of Mass of each solid has been identified using the
inertia sensor block.
Then, the modal analysis done on the real station is virtual done
on the simscape model.
Then the results are compare in order to tune the Simscape model.
2019-12-13 15:54:10 +01:00
0c796d1e3a
[major-change] finish to correct all the axis
2019-12-13 10:38:30 +01:00
1125a9b1ea
[major-change] start to change the axis of all stages to match id31
...
The idea is have the world frame the same as the one defined for id31.
Also all the actuators should actuate in the positive direction of the axes
2019-12-13 09:31:19 +01:00
7b5f932ece
Update the "positioning_error" computation file
...
Removed unused analysis
2019-12-12 13:48:39 +01:00
6af5593c16
Change the reference to the correct hexapod leg
2019-12-12 13:18:03 +01:00
ae2f89f3cc
Move one function
2019-12-11 17:34:42 +01:00
85c0b6e031
Slip the simscape folder into 3 folders
2019-12-11 17:09:32 +01:00
1ddfaa724a
Add a rigid hexapod leg referenced subsystem
2019-12-11 14:40:56 +01:00
98555355d3
Verified the function that converts the error in the NASS base
2019-12-11 09:43:30 +01:00
b3e630459a
Update the way the micro-hexapod is initialize (pitch-roll-yaw)
...
Next verified that the function to compute the wanted sample position
is working => yes
2019-12-11 09:33:46 +01:00
9fb86964ef
Test of position/orientation of an Hexapod
2019-12-10 18:06:33 +01:00
7032f05ef5
Update the metrology study.
2019-12-06 12:03:16 +01:00
920e7995cb
Add Many Simulink File
...
Add some subsystems:
- Rigid Hexapods with only one (bushing) joint
Add full simscape files:
- metrology to study the metrology system / change of reference frame
2019-12-05 12:48:00 +01:00
391c2f2b8e
Create a referenced configuration for simulink
2019-12-03 08:56:08 +01:00
d263fb6144
Correct one unit convertion block
2019-11-22 14:57:21 +01:00
35b2f4e652
Add some rigid stages as referenced-subsystems
2019-11-22 10:55:15 +01:00
6a663291a0
[major-change] convert all the stages to subsystem-referenced
...
This allows to share stages among multiple files
2019-11-22 10:22:19 +01:00
