73a3735f19
Modal Analysis of the Micro Station
...
The Center of Mass of each solid has been identified using the
inertia sensor block.
Then, the modal analysis done on the real station is virtual done
on the simscape model.
Then the results are compare in order to tune the Simscape model.
2019-12-13 15:54:10 +01:00
0c796d1e3a
[major-change] finish to correct all the axis
2019-12-13 10:38:30 +01:00
1125a9b1ea
[major-change] start to change the axis of all stages to match id31
...
The idea is have the world frame the same as the one defined for id31.
Also all the actuators should actuate in the positive direction of the axes
2019-12-13 09:31:19 +01:00
7b5f932ece
Update the "positioning_error" computation file
...
Removed unused analysis
2019-12-12 13:48:39 +01:00
6af5593c16
Change the reference to the correct hexapod leg
2019-12-12 13:18:03 +01:00
ae2f89f3cc
Move one function
2019-12-11 17:34:42 +01:00
85c0b6e031
Slip the simscape folder into 3 folders
2019-12-11 17:09:32 +01:00
1ddfaa724a
Add a rigid hexapod leg referenced subsystem
2019-12-11 14:40:56 +01:00
98555355d3
Verified the function that converts the error in the NASS base
2019-12-11 09:43:30 +01:00
b3e630459a
Update the way the micro-hexapod is initialize (pitch-roll-yaw)
...
Next verified that the function to compute the wanted sample position
is working => yes
2019-12-11 09:33:46 +01:00
9fb86964ef
Test of position/orientation of an Hexapod
2019-12-10 18:06:33 +01:00
7032f05ef5
Update the metrology study.
2019-12-06 12:03:16 +01:00
920e7995cb
Add Many Simulink File
...
Add some subsystems:
- Rigid Hexapods with only one (bushing) joint
Add full simscape files:
- metrology to study the metrology system / change of reference frame
2019-12-05 12:48:00 +01:00
391c2f2b8e
Create a referenced configuration for simulink
2019-12-03 08:56:08 +01:00
d263fb6144
Correct one unit convertion block
2019-11-22 14:57:21 +01:00
35b2f4e652
Add some rigid stages as referenced-subsystems
2019-11-22 10:55:15 +01:00
6a663291a0
[major-change] convert all the stages to subsystem-referenced
...
This allows to share stages among multiple files
2019-11-22 10:22:19 +01:00
