Finish draft
No files matched your search
|
Before Width: | Height: | Size: 65 KiB After Width: | Height: | Size: 71 KiB |
|
Before Width: | Height: | Size: 647 KiB After Width: | Height: | Size: 497 KiB |
|
Before Width: | Height: | Size: 706 KiB After Width: | Height: | Size: 518 KiB |
|
After Width: | Height: | Size: 7.5 KiB |
|
After Width: | Height: | Size: 7.6 KiB |
|
After Width: | Height: | Size: 9.1 KiB |
|
Before Width: | Height: | Size: 1.7 MiB After Width: | Height: | Size: 303 KiB |
|
Before Width: | Height: | Size: 219 KiB |
|
Before Width: | Height: | Size: 61 KiB After Width: | Height: | Size: 68 KiB |
|
Before Width: | Height: | Size: 310 KiB After Width: | Height: | Size: 374 KiB |
|
Before Width: | Height: | Size: 135 KiB After Width: | Height: | Size: 150 KiB |
|
After Width: | Height: | Size: 67 KiB |
|
Before Width: | Height: | Size: 130 KiB After Width: | Height: | Size: 145 KiB |
|
After Width: | Height: | Size: 46 KiB |
@@ -25,8 +25,8 @@
|
||||
inkscape:deskcolor="#d1d1d1"
|
||||
inkscape:document-units="mm"
|
||||
inkscape:zoom="4.1691919"
|
||||
inkscape:cx="147.15082"
|
||||
inkscape:cy="80.591157"
|
||||
inkscape:cx="96.54149"
|
||||
inkscape:cy="91.864325"
|
||||
inkscape:window-width="2534"
|
||||
inkscape:window-height="1367"
|
||||
inkscape:window-x="11"
|
||||
@@ -35,6 +35,25 @@
|
||||
inkscape:current-layer="layer1" />
|
||||
<defs
|
||||
id="defs1">
|
||||
<marker
|
||||
style="overflow:visible"
|
||||
id="marker5"
|
||||
refX="0"
|
||||
refY="0"
|
||||
orient="auto-start-reverse"
|
||||
inkscape:stockid="Concave triangle arrow"
|
||||
markerWidth="1"
|
||||
markerHeight="1"
|
||||
viewBox="0 0 1 1"
|
||||
inkscape:isstock="true"
|
||||
inkscape:collect="always"
|
||||
preserveAspectRatio="xMidYMid">
|
||||
<path
|
||||
transform="scale(0.7)"
|
||||
d="M -2,-4 9,0 -2,4 c 2,-2.33 2,-5.66 0,-8 z"
|
||||
style="fill:context-stroke;fill-rule:evenodd;stroke:none"
|
||||
id="path5" />
|
||||
</marker>
|
||||
<marker
|
||||
style="overflow:visible"
|
||||
id="ConcaveTriangle"
|
||||
@@ -83,13 +102,13 @@
|
||||
clip-path="url(#clipPath2)"
|
||||
transform="matrix(3.0087207,0,0,3.0087207,86.11515,158.1167)" />
|
||||
<path
|
||||
id="path10"
|
||||
style="font-variation-settings:normal;vector-effect:none;fill:#0072bd;fill-opacity:0.5;stroke:none;stroke-width:0.0264583;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;-inkscape-stroke:none;stop-color:#000000"
|
||||
d="m -71.296934,201.03566 -6.09694,1.02747 0.0097,-9.36351 0.164782,-0.32956 5.757683,-1.01778 0.193862,0.31018 z"
|
||||
id="path10" />
|
||||
d="m -71.461785,191.35215 -5.757788,1.01802 -0.164847,0.3297 -0.0093,9.36325 6.096785,-1.02733 0.02894,-9.37358 z m -2.890779,1.14205 a 0.45701271,0.91823798 0 0 1 0.456819,0.91829 0.45701271,0.91823798 0 0 1 -0.456819,0.91829 0.45701271,0.91823798 0 0 1 -0.45682,-0.91829 0.45701271,0.91823798 0 0 1 0.45682,-0.91829 z" />
|
||||
<path
|
||||
id="path11"
|
||||
style="font-variation-settings:normal;vector-effect:none;fill:#0072bd;fill-opacity:0.5;stroke:none;stroke-width:0.0264583;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;-inkscape-stroke:none;stop-color:#000000"
|
||||
d="m -77.38224,220.94413 2.488014,0.10281 3.639492,-0.65799 -0.0068,8.76631 -0.21933,0.37698 -5.681995,1.00754 -0.226183,-0.21933 z"
|
||||
id="path11" />
|
||||
d="m -71.254562,220.38914 -3.639571,0.65784 -2.48822,-0.10284 -0.0067,9.37617 0.226342,0.21963 5.681824,-1.00769 0.219625,-0.37724 z m -3.067513,7.17992 a 0.45701271,0.91823798 0 0 1 0.457336,0.91829 0.45701271,0.91823798 0 0 1 -0.457336,0.91829 0.45701271,0.91823798 0 0 1 -0.45682,-0.91829 0.45701271,0.91823798 0 0 1 0.45682,-0.91829 z" />
|
||||
<text
|
||||
xml:space="preserve"
|
||||
style="font-size:4.23333px;line-height:1.25;font-family:'Latin Modern Roman';-inkscape-font-specification:'Latin Modern Roman, Normal';stroke-width:0.264583"
|
||||
@@ -110,5 +129,33 @@
|
||||
style="fill:none;stroke:#0072bd;stroke-width:0.264583;stroke-linecap:butt;stroke-linejoin:miter;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#ConcaveTriangle)"
|
||||
d="m -86.203959,197.46907 h 5.394231"
|
||||
id="path2" />
|
||||
<text
|
||||
xml:space="preserve"
|
||||
style="font-size:3.52777px;line-height:1.25;font-family:'Latin Modern Roman';-inkscape-font-specification:'Latin Modern Roman, Normal';text-align:center;text-anchor:middle;stroke-width:0.264583"
|
||||
x="-65.110039"
|
||||
y="215.99568"
|
||||
id="text3"
|
||||
transform="rotate(3.0200656)"><tspan
|
||||
sodipodi:role="line"
|
||||
id="tspan3"
|
||||
style="stroke-width:0.264583"
|
||||
x="-65.110039"
|
||||
y="215.99568">Piezoelectric Stacks</tspan></text>
|
||||
<text
|
||||
xml:space="preserve"
|
||||
style="font-size:3.52777px;line-height:1.25;font-family:'Latin Modern Roman';-inkscape-font-specification:'Latin Modern Roman, Normal';text-align:center;text-anchor:middle;stroke-width:0.264583"
|
||||
x="-55.753853"
|
||||
y="194.61722"
|
||||
id="text4"><tspan
|
||||
sodipodi:role="line"
|
||||
id="tspan4"
|
||||
style="stroke-width:0.264583"
|
||||
x="-55.753853"
|
||||
y="194.61722">Dowel Hole</tspan></text>
|
||||
<path
|
||||
style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;marker-end:url(#marker5)"
|
||||
d="m -65.070754,193.41249 h -7.237491"
|
||||
id="path4"
|
||||
sodipodi:nodetypes="cc" />
|
||||
</g>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 893 KiB After Width: | Height: | Size: 895 KiB |
@@ -24,17 +24,49 @@
|
||||
inkscape:pagecheckerboard="0"
|
||||
inkscape:deskcolor="#d1d1d1"
|
||||
inkscape:document-units="mm"
|
||||
inkscape:zoom="2"
|
||||
inkscape:cx="16.25"
|
||||
inkscape:cy="145.5"
|
||||
inkscape:zoom="4"
|
||||
inkscape:cx="99.125"
|
||||
inkscape:cy="141"
|
||||
inkscape:window-width="2534"
|
||||
inkscape:window-height="1367"
|
||||
inkscape:window-x="11"
|
||||
inkscape:window-y="60"
|
||||
inkscape:window-maximized="1"
|
||||
inkscape:current-layer="layer1" /><defs
|
||||
inkscape:current-layer="g10" /><defs
|
||||
id="defs1"><marker
|
||||
style="overflow:visible"
|
||||
id="marker12"
|
||||
refX="0"
|
||||
refY="0"
|
||||
orient="auto-start-reverse"
|
||||
inkscape:stockid="Concave triangle arrow"
|
||||
markerWidth="1"
|
||||
markerHeight="1"
|
||||
viewBox="0 0 1 1"
|
||||
inkscape:isstock="true"
|
||||
inkscape:collect="always"
|
||||
preserveAspectRatio="xMidYMid"><path
|
||||
transform="scale(0.7)"
|
||||
d="M -2,-4 9,0 -2,4 c 2,-2.33 2,-5.66 0,-8 z"
|
||||
style="fill:context-stroke;fill-rule:evenodd;stroke:none"
|
||||
id="path12" /></marker><marker
|
||||
style="overflow:visible"
|
||||
id="marker10"
|
||||
refX="0"
|
||||
refY="0"
|
||||
orient="auto-start-reverse"
|
||||
inkscape:stockid="Concave triangle arrow"
|
||||
markerWidth="1"
|
||||
markerHeight="1"
|
||||
viewBox="0 0 1 1"
|
||||
inkscape:isstock="true"
|
||||
inkscape:collect="always"
|
||||
preserveAspectRatio="xMidYMid"><path
|
||||
transform="scale(0.7)"
|
||||
d="M -2,-4 9,0 -2,4 c 2,-2.33 2,-5.66 0,-8 z"
|
||||
style="fill:context-stroke;fill-rule:evenodd;stroke:none"
|
||||
id="path10" /></marker><marker
|
||||
style="overflow:visible"
|
||||
id="marker19"
|
||||
refX="0"
|
||||
refY="0"
|
||||
@@ -210,4 +242,61 @@
|
||||
style="fill:none;stroke:#d95319;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
|
||||
d="m 23.584217,15.96446 h 5.702702"
|
||||
id="path18"
|
||||
sodipodi:nodetypes="cc" /></g></svg>
|
||||
sodipodi:nodetypes="cc" /><ellipse
|
||||
style="font-variation-settings:normal;opacity:1;vector-effect:none;fill:#77ac30;fill-opacity:0.5;stroke:none;stroke-width:0.0264594;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;-inkscape-stroke:none;stop-color:#000000;stop-opacity:1"
|
||||
id="path1"
|
||||
cx="-1.1421245"
|
||||
cy="40.597565"
|
||||
rx="0.71269101"
|
||||
ry="0.97389603"
|
||||
transform="matrix(0.97743166,-0.21125188,0.19903032,0.97999333,0,0)" /><ellipse
|
||||
style="font-variation-settings:normal;opacity:1;vector-effect:none;fill:#77ac30;fill-opacity:0.5;stroke:none;stroke-width:0.0264594;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;-inkscape-stroke:none;stop-color:#000000;stop-opacity:1"
|
||||
id="ellipse1"
|
||||
cx="-2.4878345"
|
||||
cy="47.35318"
|
||||
rx="0.71269101"
|
||||
ry="0.97389603"
|
||||
transform="matrix(0.97743166,-0.21125188,0.19903032,0.97999333,0,0)" /><text
|
||||
xml:space="preserve"
|
||||
style="font-size:3.52777px;line-height:1.25;font-family:'Latin Modern Roman';-inkscape-font-specification:'Latin Modern Roman, Normal';text-align:center;text-anchor:middle;fill:#77ac30;stroke-width:0.264583"
|
||||
x="-1.0059677"
|
||||
y="42.043705"
|
||||
id="text2"><tspan
|
||||
sodipodi:role="line"
|
||||
id="tspan1"
|
||||
style="text-align:end;text-anchor:end;fill:#77ac30;stroke-width:0.264583"
|
||||
x="-1.0059682"
|
||||
y="42.043705">Encoder</tspan><tspan
|
||||
sodipodi:role="line"
|
||||
style="text-align:end;text-anchor:end;fill:#77ac30;stroke-width:0.264583"
|
||||
x="-1.0059679"
|
||||
y="46.453419"
|
||||
id="tspan2">Interface</tspan></text><g
|
||||
id="g10"><path
|
||||
style="fill:none;stroke:#77ac30;stroke-width:0.265;stroke-linecap:butt;stroke-linejoin:miter;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#marker10)"
|
||||
d="M -0.159837,43.513923 H 3.2137187 L 4.963948,41.810536"
|
||||
id="path2"
|
||||
sodipodi:nodetypes="ccc" /><path
|
||||
style="fill:none;stroke:#77ac30;stroke-width:0.265;stroke-linecap:butt;stroke-linejoin:miter;stroke-dasharray:none;stroke-opacity:1;marker-end:url(#marker10)"
|
||||
d="M 3.2137186,43.513923 4.963948,45.21731"
|
||||
id="path3"
|
||||
sodipodi:nodetypes="cc" /><path
|
||||
style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;marker-end:url(#marker12)"
|
||||
d="m 0.1556489,30.452929 h 5.5865204 l 7.4367737,7.144313"
|
||||
id="path11"
|
||||
sodipodi:nodetypes="ccc" /></g><text
|
||||
xml:space="preserve"
|
||||
style="font-size:3.52777px;line-height:1.25;font-family:'Latin Modern Roman';-inkscape-font-specification:'Latin Modern Roman, Normal';text-align:center;text-anchor:middle;stroke-width:0.264583"
|
||||
x="-1.0024418"
|
||||
y="29.47221"
|
||||
id="text4"><tspan
|
||||
sodipodi:role="line"
|
||||
id="tspan4"
|
||||
style="text-align:end;text-anchor:end;stroke-width:0.264583"
|
||||
x="-1.0024421"
|
||||
y="29.47221">Slotted</tspan><tspan
|
||||
sodipodi:role="line"
|
||||
style="text-align:end;text-anchor:end;stroke-width:0.264583"
|
||||
x="-1.0024419"
|
||||
y="33.881924"
|
||||
id="tspan10">Hole</tspan></text></g></svg>
|
||||
|
Before Width: | Height: | Size: 955 KiB After Width: | Height: | Size: 959 KiB |
|
Before Width: | Height: | Size: 2.5 MiB After Width: | Height: | Size: 528 KiB |
@@ -0,0 +1,122 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<!-- Created with Inkscape (http://www.inkscape.org/) -->
|
||||
|
||||
<svg
|
||||
width="78.786766mm"
|
||||
height="31.723515mm"
|
||||
viewBox="0 0 78.786766 31.723515"
|
||||
version="1.1"
|
||||
id="svg1"
|
||||
inkscape:version="1.4.1 (93de688d07, 2025-03-30)"
|
||||
sodipodi:docname="detail_design_strut_with_enc.svg"
|
||||
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
|
||||
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
|
||||
xmlns:xlink="http://www.w3.org/1999/xlink"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
xmlns:svg="http://www.w3.org/2000/svg">
|
||||
<sodipodi:namedview
|
||||
id="namedview1"
|
||||
pagecolor="#ffffff"
|
||||
bordercolor="#666666"
|
||||
borderopacity="1.0"
|
||||
inkscape:showpageshadow="2"
|
||||
inkscape:pageopacity="0.0"
|
||||
inkscape:pagecheckerboard="0"
|
||||
inkscape:deskcolor="#d1d1d1"
|
||||
inkscape:document-units="mm"
|
||||
inkscape:zoom="5.12"
|
||||
inkscape:cx="144.43359"
|
||||
inkscape:cy="63.085938"
|
||||
inkscape:window-width="2534"
|
||||
inkscape:window-height="1367"
|
||||
inkscape:window-x="11"
|
||||
inkscape:window-y="60"
|
||||
inkscape:window-maximized="1"
|
||||
inkscape:current-layer="layer1" />
|
||||
<defs
|
||||
id="defs1">
|
||||
<marker
|
||||
style="overflow:visible"
|
||||
id="marker4"
|
||||
refX="0"
|
||||
refY="0"
|
||||
orient="auto-start-reverse"
|
||||
inkscape:stockid="Concave triangle arrow"
|
||||
markerWidth="1"
|
||||
markerHeight="1"
|
||||
viewBox="0 0 1 1"
|
||||
inkscape:isstock="true"
|
||||
inkscape:collect="always"
|
||||
preserveAspectRatio="xMidYMid">
|
||||
<path
|
||||
transform="scale(0.7)"
|
||||
d="M -2,-4 9,0 -2,4 c 2,-2.33 2,-5.66 0,-8 z"
|
||||
style="fill:context-stroke;fill-rule:evenodd;stroke:none"
|
||||
id="path4" />
|
||||
</marker>
|
||||
<marker
|
||||
style="overflow:visible"
|
||||
id="ConcaveTriangle"
|
||||
refX="0"
|
||||
refY="0"
|
||||
orient="auto-start-reverse"
|
||||
inkscape:stockid="Concave triangle arrow"
|
||||
markerWidth="1"
|
||||
markerHeight="1"
|
||||
viewBox="0 0 1 1"
|
||||
inkscape:isstock="true"
|
||||
inkscape:collect="always"
|
||||
preserveAspectRatio="xMidYMid">
|
||||
<path
|
||||
transform="scale(0.7)"
|
||||
d="M -2,-4 9,0 -2,4 c 2,-2.33 2,-5.66 0,-8 z"
|
||||
style="fill:context-stroke;fill-rule:evenodd;stroke:none"
|
||||
id="path7" />
|
||||
</marker>
|
||||
</defs>
|
||||
<g
|
||||
inkscape:label="Layer 1"
|
||||
inkscape:groupmode="layer"
|
||||
id="layer1"
|
||||
transform="translate(7262.5479,-1677.4584)">
|
||||
<image
|
||||
width="78.786766"
|
||||
height="31.723515"
|
||||
preserveAspectRatio="none"
|
||||
xlink:href="data:image/jpeg;base64,/9j/4AAQSkZJRgABAQAAAQABAAD/4QBiRXhpZgAATU0AKgAAAAgABQESAAMAAAABAAEAAAEaAAUA AAABAAAASgEbAAUAAAABAAAAUgEoAAMAAAABAAEAAAITAAMAAAABAAEAAAAAAAAAAAABAAAAAQAA AAEAAAAB/9sAQwABAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEB AQEBAQEBAQEBAQEBAQEBAQEB/9sAQwEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEB AQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEB/8AAEQgBiwPVAwEiAAIRAQMRAf/EAB8AAAEF AQEBAQEBAAAAAAAAAAABAgMEBQYHCAkKC//EALUQAAIBAwMCBAMFBQQEAAABfQECAwAEEQUSITFB BhNRYQcicRQygZGhCCNCscEVUtHwJDNicoIJChYXGBkaJSYnKCkqNDU2Nzg5OkNERUZHSElKU1RV VldYWVpjZGVmZ2hpanN0dXZ3eHl6g4SFhoeIiYqSk5SVlpeYmZqio6Slpqeoqaqys7S1tre4ubrC w8TFxsfIycrS09TV1tfY2drh4uPk5ebn6Onq8fLz9PX29/j5+v/EAB8BAAMBAQEBAQEBAQEAAAAA AAABAgMEBQYHCAkKC//EALURAAIBAgQEAwQHBQQEAAECdwABAgMRBAUhMQYSQVEHYXETIjKBCBRC kaGxwQkjM1LwFWJy0QoWJDThJfEXGBkaJicoKSo1Njc4OTpDREVGR0hJSlNUVVZXWFlaY2RlZmdo aWpzdHV2d3h5eoKDhIWGh4iJipKTlJWWl5iZmqKjpKWmp6ipqrKztLW2t7i5usLDxMXGx8jJytLT 1NXW19jZ2uLj5OXm5+jp6vLz9PX29/j5+v/aAAwDAQACEQMRAD8A/v4ooooAKKKKACiiigAooooA KKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACk9f84/n27Y5/Glo/D/ADz/ AJ4z16UAIfYjn69/Q5HqKM/07H9emD7fT1Ao5/Qep5/MZ4/zwRRn8/y9Prxz74+tABnr2+o/qOMe vpjrSd8E+mMjJznvjA/D2zkUvU/lnpnv19vT8x60D1/z+H144/n1oAQAdPbHPbsQOv49eeCTjFL3 yfpnH6+w9zx9B1Px6+34cd/Trnj2pf8AP/6v89unqAIRnj1yOuD3455x16fkRmj355x39/bj0556 88Ue2Pp9B+P+cgUhBP19eQMZPvnPTgY6cnGBQAAjj3/3vbHX19z3755APpkexxkZ6D2Pce44pR06 8gY9eR9f1/mMcH156Y447c9+5/T2JoATn3zj0HX17+nqBz65NHB9uvUDvwQD7nrg57ZBpf8AJHHH fP8AnPt0NGeRz1GR15/p0P1HBOaAA8f0wPp6Y9OR3AH0pOcemPYD6A8ngd8c8ce51/DnoffOcjoR x09cdKDn0PPUj9TjJPQen060AJwOD79e+OQOB3zyP0Ocl3vxyfbtx+Q5PXI/Sk6k4PBHP1OPp/Dg f/XoPPTBwOvU+vYY9D37cdKAD1z6dfz5xnjoDxjp2PQ5HJ4HJPftx+nXGenHU0vQ9f8A6/p/UZPf tkggODx/ng98fng9f5ACDsfzx65BwMcYznP6ml/z19fY/T8OQKQ5zgduvtxwDzkjPJ47nng0h6j2 IJAHOfXHcduM49TyKAFPPX37n6A8ev8AdB5ye9Ge49v19M4yTznnjjjOaMnvxjPT/DJzxj6E988L 6nH178jp0PY5/LtgUANwCc5zj6ngcY/LP+8eemQV4H0z2wfTk/zJPr9CU5A9zwMnryeOeuM8HHcd e5nPbvyR68Y9SecdOOg5A5AFHpk89Mn2Hfrnr0OPSjHX9e+cZAOCegOTj1HGccnIweMHjA6DPIOf yH48dcFoz6j19+33T0A2gf1wCKAHc+vvnHT36deuenU+wpOnHPXjGeB645OB69z1GMGgkZGM44xj npkH9Dyef0oxnjPXBHToB1Ixzz2/LGKADgnkj1+oHb04749DycnB65AznPPYcd+3A4OOeD2IAQR0 J7djnjjqMZHIz+OOmKXGOgwOT9MY54656kZ5x69QBuPXnoeBxgA8A+p4/wATxSHocHA4/wAOcD5u ffuMgUvIzyB37dgMgenHT2x3zSHJPPf1H3fzwOTkZ9uOaAFPTpweck9/p15xwckgHqOx7dPT5hjH UdCOPXIJI75xR6r1B/A4wMDB6HkYJPPTkjFHPY49eOcg8n16ZznrzkDcKAD1OR7d8k9PU9M4GMYP rk0mfr274BBHof8ADGD9DS9QfTnOMcdPQ9McdCRggZ6UpB+uM85/QdcdMHrnPPsAN6Zxjp36/wBQ T1GOoz164OBweePoRg5HbIByPfJx1GKOvpknjn2JJ6Y4yMjp1wBScYweAPzzxnj1HGQTxzjjGAW+ /wDX+Tv5+aFx0JxwMnOT1wQB0GRnpnBz+RwCOueM8cg+vvn9QckEjk5yCeD6kdO+cY6dfxySaMnr xwOgJB78jAx69MjHWgL/AD9Pl/nf0DIz2456Hnvz2x36Y7gdRScc9B9MEDOOe+Bz2wegBJzS/Tjr gZ4BHfOcdeBkHJGM46Jx1yDjj8+meM8AH344A4NA/wCv6/rQO+Ceh9yBj29Ox6dscUE8+oHTIODx gcHHpg/SjBP4/icgjPT8+O3rSZ/+v9cfX1z+Z+lAra3v5eXn+Xf8RP8APf8Az7/n7Cl/zj/6/oOP w70cj2/TI/kenPqfWjjtk46Z7fUfX8CfyID/AKfldXXz/TyE/wAj/P4Uf5/yemc0UH/P+f6d/pmg La+vkvJO/r92nzG4xk49R68emB79B6flRnAwOv4cE9Afbt9OnOKX249+OD2/PGOO3vR79eOMf0xk 4PGetAbrutPO/wB/4317ah6jp044+gP046HsOnYtOADgYxng9Dxj2HbPHb3JFO/n9Ow/n3+mR+Le px2HXOeRggnPbuBzj8uQXrez1Sdv7u+/V/n6hnqeO+Rnr6Y7EADPOf4uM8UmOOgGeg4HqRk4746c HpyO6nt0xj8OSOfwBz2xnqeabxkcjI9BjGD0zg45JPQD2wRgDyT69m7NWdtNl/V1awuOuCAOScc8 Dj2J/kfyynH6dyMgheMdOvryDwRzwDkZyM/njgHtjp6DgcemaMdMeuQMZye54549MDp04oCy63d9 n/4D1Wt21f0XRCZx2+vJz16nB4Oe3r+FGOP1+nHI4/D2HtzhPcY7j6dff049+2Tml47jnnPPfHrz 3wevHPFAla+nTdXaelraN7brWy8nYbSHHPGT0P484yex9ume1LSfX39efQc8dOvbOR3NAu2+lm9r aKN36W/HYaeckZJ64wcDgfTP+B5GM03gHtgAdPYkZzjkHGDjAOQDTm9QP8eccexxgDjOMYOeKaR1 79iQQSfr1wOwHXueQKBdPN2622tp06Was7q9u7E9+emc9T6Z/P2zz1zimn/P/wBf27f5zTs856fT j8OMd+pz39hSHPT6cfgP1x196fbfvv6fd6/5Brf5LdNW201+W94636kZPr39u3pg+uRk9M4B6ctO M5xwO/rnH0J4yRyeo7U84PTr6g9PQ9fxHTjPuChB4z37Z9e3UZ5OMjHy5BPSqVrLS70SvfR6adFq 7vf13J/ron0/pN779yP09fb1/DqfT8OaQ/rz1/rTjnHPp6D1wcY+mMnt6cZacf45q1bZ2++6fwu9 7Wvr21ezERnvznvnJOM5HY9AOp+oxzgRtnvxknP4+h/EYxn9c1IenfrkHn8M9+Bjk5OTjPBphB55 BP1z+PuPxz+Rprp6evbZvo/xAgPUdhxken16/me55GSRTGHX34zx3/Pr04zUp7j26HHH5njk8Y68 AYAyWEY6f/Xz9D0/Ue/owK7Z5/H/AOsTx74Bx07VCwHJ98/4dBjB7HPJznJHFgjB/TjHXg8ZxjjA zg8dcmoWB5AHHX1yceg98ZzxnB+oBVYDoAR1xxgEn07/AM+wHbNdwcfnz19h19vzOc+ptsPp+meO cDg5yP5dwTVdx7d+wzj/ACP1xQBSfqcY6nIP556EYPpjp+ZqyDr/AA/5Gfr1OB0OfpV11xnkfgP5 nnr26A/nVWQfy7D0xjp3zx27YxwaAM2Tv7fXt9COpweO5/KhKOvPJ59R3GPX24znPHpWlIDz7e/G cnp7nHUdOpzVKQDDHOOO3PGeOv6H3yeKqL1Xm1tv+W3l5Cev9f19+66GRIME9Pc8cA/me+OOuT36 UZRwTx7ducn17+uPX3ydGUdepPfpk/48d8n+WaEowCSO2OOevJPBHUZ74757Vstl/X+X5Ihtba2+ 9atet9n872MxycnGc+nf8Dzk4Hbp74GYTjPXOfzz79OPoM47dKnkU5P4kf56EZGO4PBqA/hx3GeB njHOcAnsPTrQQv60vtb06Xvfp23E75649se3v/XPfNSKeeQeSevH178HJHABGR06gQ/j+Hp/n9e3 FSKecdP15z1GenB568Z+oA6b+m2+m/y79V6l9Dxx9fbHbOPfG3Hr3zirCnBH+Sf6c/h1PNU0PAHt 9emPb36c4HBq2h54Line truncated
|
||||
id="image1"
|
||||
x="-7262.5479"
|
||||
y="1677.4584"
|
||||
style="stroke-width:3.29442" />
|
||||
<text
|
||||
xml:space="preserve"
|
||||
style="font-size:3.52777px;line-height:1.25;font-family:'Latin Modern Roman';-inkscape-font-specification:'Latin Modern Roman, Normal';text-align:end;text-anchor:end;stroke-width:0.264583"
|
||||
x="-7248.2241"
|
||||
y="1681.6069"
|
||||
id="text1"><tspan
|
||||
sodipodi:role="line"
|
||||
id="tspan1"
|
||||
style="stroke-width:0.264583"
|
||||
x="-7248.2241"
|
||||
y="1681.6069">Encoder</tspan></text>
|
||||
<text
|
||||
xml:space="preserve"
|
||||
style="font-size:3.52777px;line-height:1.25;font-family:'Latin Modern Roman';-inkscape-font-specification:'Latin Modern Roman, Normal';text-align:end;text-anchor:end;stroke-width:0.264583"
|
||||
x="-7193.7051"
|
||||
y="1681.5875"
|
||||
id="text2"><tspan
|
||||
sodipodi:role="line"
|
||||
id="tspan2"
|
||||
style="stroke-width:0.264583"
|
||||
x="-7193.7051"
|
||||
y="1681.5875">Ruler</tspan></text>
|
||||
<path
|
||||
style="fill:none;stroke:#000000;stroke-width:0.265;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#ConcaveTriangle)"
|
||||
d="m -7247.0181,1680.7471 h 10.1218 l 2.1866,1.2624"
|
||||
id="path2" />
|
||||
<path
|
||||
style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;marker-end:url(#marker4)"
|
||||
d="m -7203.023,1680.6146 h -6.3581 l -7.21,7.21"
|
||||
id="path3" />
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 196 KiB |
@@ -0,0 +1,85 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<!-- Created with Inkscape (http://www.inkscape.org/) -->
|
||||
|
||||
<svg
|
||||
width="78.786766mm"
|
||||
height="48.254402mm"
|
||||
viewBox="0 0 78.786766 48.254402"
|
||||
version="1.1"
|
||||
id="svg1"
|
||||
xml:space="preserve"
|
||||
inkscape:version="1.4.1 (93de688d07, 2025-03-30)"
|
||||
sodipodi:docname="detail_design_strut_without_enc.svg"
|
||||
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
|
||||
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
|
||||
xmlns:xlink="http://www.w3.org/1999/xlink"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"><sodipodi:namedview
|
||||
id="namedview1"
|
||||
pagecolor="#ffffff"
|
||||
bordercolor="#666666"
|
||||
borderopacity="1.0"
|
||||
inkscape:showpageshadow="2"
|
||||
inkscape:pageopacity="0.0"
|
||||
inkscape:pagecheckerboard="0"
|
||||
inkscape:deskcolor="#d1d1d1"
|
||||
inkscape:document-units="mm"
|
||||
inkscape:zoom="4.2404602"
|
||||
inkscape:cx="164.95851"
|
||||
inkscape:cy="83.953153"
|
||||
inkscape:window-width="2534"
|
||||
inkscape:window-height="1367"
|
||||
inkscape:window-x="11"
|
||||
inkscape:window-y="60"
|
||||
inkscape:window-maximized="1"
|
||||
inkscape:current-layer="layer1" /><defs
|
||||
id="defs1"><marker
|
||||
style="overflow:visible"
|
||||
id="ConcaveTriangle"
|
||||
refX="0"
|
||||
refY="0"
|
||||
orient="auto-start-reverse"
|
||||
inkscape:stockid="Concave triangle arrow"
|
||||
markerWidth="1"
|
||||
markerHeight="1"
|
||||
viewBox="0 0 1 1"
|
||||
inkscape:isstock="true"
|
||||
inkscape:collect="always"
|
||||
preserveAspectRatio="xMidYMid"><path
|
||||
transform="scale(0.7)"
|
||||
d="M -2,-4 9,0 -2,4 c 2,-2.33 2,-5.66 0,-8 z"
|
||||
style="fill:context-stroke;fill-rule:evenodd;stroke:none"
|
||||
id="path7" /></marker></defs><g
|
||||
inkscape:label="Layer 1"
|
||||
inkscape:groupmode="layer"
|
||||
id="layer1"
|
||||
transform="translate(-97.091873,-25.749657)"><image
|
||||
width="78.786766"
|
||||
height="48.254402"
|
||||
preserveAspectRatio="none"
|
||||
xlink:href="data:image/jpeg;base64,/9j/4AAQSkZJRgABAQAAAQABAAD/4QBiRXhpZgAATU0AKgAAAAgABQESAAMAAAABAAEAAAEaAAUA AAABAAAASgEbAAUAAAABAAAAUgEoAAMAAAABAAEAAAITAAMAAAABAAEAAAAAAAAAAAABAAAAAQAA AAEAAAAB/9sAQwABAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEB AQEBAQEBAQEBAQEBAQEBAQEB/9sAQwEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEB AQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEB/8AAEQgC1wSjAwEiAAIRAQMRAf/EAB8AAAEF AQEBAQEBAAAAAAAAAAABAgMEBQYHCAkKC//EALUQAAIBAwMCBAMFBQQEAAABfQECAwAEEQUSITFB BhNRYQcicRQygZGhCCNCscEVUtHwJDNicoIJChYXGBkaJSYnKCkqNDU2Nzg5OkNERUZHSElKU1RV VldYWVpjZGVmZ2hpanN0dXZ3eHl6g4SFhoeIiYqSk5SVlpeYmZqio6Slpqeoqaqys7S1tre4ubrC w8TFxsfIycrS09TV1tfY2drh4uPk5ebn6Onq8fLz9PX29/j5+v/EAB8BAAMBAQEBAQEBAQEAAAAA AAABAgMEBQYHCAkKC//EALURAAIBAgQEAwQHBQQEAAECdwABAgMRBAUhMQYSQVEHYXETIjKBCBRC kaGxwQkjM1LwFWJy0QoWJDThJfEXGBkaJicoKSo1Njc4OTpDREVGR0hJSlNUVVZXWFlaY2RlZmdo aWpzdHV2d3h5eoKDhIWGh4iJipKTlJWWl5iZmqKjpKWmp6ipqrKztLW2t7i5usLDxMXGx8jJytLT 1NXW19jZ2uLj5OXm5+jp6vLz9PX29/j5+v/aAAwDAQACEQMRAD8A/v4ooooAKKKKACiiigAooooA KKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAo oooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACii igAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKK ACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooA KKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAo oooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACii igAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKK ACiiigAooooAKKKKACiiigAooooAKK8Q/aE/aN+DH7LHwz1v4u/HXx1pPgPwPoaqs2oai0k15qF7 KdtrpOh6VapNqWtavePhLbTtNtri5f5pGRYY5JE/js/by/4OTfiz8S/7b+H37Ffh+4+D3gubz7F/ ix4mgtL74nazbsGia58P6Xuu9F8FxSglobmRtZ1pEKTRzaXcqY1AP7Q/iF8Vvhj8JNDuPE3xR+IX gv4eeH7SNpbjWPGniXR/DenxogJY/adWu7SN24wEQs7H5VUkgV+ZPjb/AILq/wDBL3wPcXlpcftL WHiS5spZIZE8FeC/HnimCWSNirfZdR03w2+l3UZIyk8F88Ei4aOVlIJ/zoPiJ8V/ih8XdcufE3xU +InjX4jeIbh3lm1jxp4m1jxLfkyMWcJcavd3bxJnOIoykajARFAwPOCSCMcAE8YyMD09McDJGD3J HNAH+g1q3/Byh/wTg0+7a3sZvjhrkI6X2n/DOO3tn5I+VNX8Q6bd4IGQWtlBzjjnGZ/xEvf8E7D/ AMwz4/f+G50f9P8Aisefr68fT/P9LD06EdPw/IgYGfTPbFBbnOeMAZPcE5GcfUfXHfOKAP8AQC/4 iX/+CdY66Z8f8+n/AArrR849f+Rx9OfWk/4iYP8AgnWemmfH8/T4c6P+f/I4/gPU8V/n+n5jyRgg 8gfljjnj1x6ehpyg9cEknAHoRwMj9fb6ngA/0AV/4OX/APgnWSB/Zvx/AJxk/DnSCB6k48YkkD2z /LPr/hT/AIOEv+CYfiZokvPi54w8ISS4G3xR8LPG8SRkk8PPoul61bjaMMxEpUKc54Ir/OjxgggD r0I46Dpx6D9eo4pfNOABwec885zgcgcHOOfxzmj08vu/4bYD/VZ+BP7eX7HX7S7R2/wR/aJ+GHjr VJFDjw7aeI7bTPFQB/veFtc/szxAPr/ZxHvivrcEEZByDyCOhHrX+PtZ3t5YXUF7Y3VxZ3ltIk1v dWkstvcQTI25JYZ4WSWKWNvmV0ZZEIyCCBj9Zv2M/wDgtN+29+yDrdnEvxH1b41fDYzQLqnw0+Lu sap4nsmsotqOvhzxJfXFx4h8L3SxApbtZXc2mBiHudIvAgFAH+lHRX5Qf8E+/wDgsH+yz+38lt4U 8M6jd/DP42x6e15qPwh8azQR6leCBc3lx4O1uLZpvi2xg5lZLT7NrEFt+/vNItogzj9X6ACiiigA ooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACi iigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKK KACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAoooo AKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigA ooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAr47/AG5P21vhN+wd8B/EHxu+Kl01 19nYaT4M8G2NxDFr/jzxddRSPp/h7Ro5SduRG93qd+yPBpemQXN7OGEaRyfUnizxToPgfwv4i8Z+ KdTtdG8NeFNE1PxFr+rXsqw2mm6Po9nNqGo3tzK5CpDbWsEsrsT0U96/zM/+CoH/AAUR8ef8FCf2 h9V8a6hLd6R8I/BtxqOgfBvwI08jWui+Ghc7X1+/hG2KXxP4o8iDUNYutm6CMWelRO9tp0UkgB5v +3R/wUA/aA/b8+KFx4/+MevNDoOnzXMPgT4a6NPPD4L8CaVI7bLXSrB3xeapKhUan4gvhLqmpOMS SxWsVvaW/wAPAlvYDAx0Bz9OeuT3/LkqSOpAPUEngjv0OM4yOfr0zUZJOAOO5wPz9ucDjk5zxzwA IQR0P17ckeuCQQfr6dsU1h0OOgHbjntt9f8ADrjkTIin1PqRg5PHHbjpjHqeT3c6bRk5xjPHOfQ8 kngkDv146mgAUKcdOhJzn8uRwTjpweMcio3xkkDgDqBx079Ovtwf1pqk88kc8de3GcnuR6f1NTYU rkkE46A5xzyecHGOeuckj1yBuQJk46YHH+Gegx2zkdfWplLKcYwewI/p29z2wR24aCB0AB7Dp7de oxn1HHcd5A4GT3HHJ454/Ik4z9MigFsuo5sEAE4ORxwcE+nUA8EZHfgUzbyT6d+oPvx6fhk4OeaU ksVOAOee/B5ycD/PGc0smQuRk8ZPXJ/PPoe3PJ6YBX9fl+AAAMcdD74Pr9Rn9eBzgU0nBXB46fgS vf6c9yOvQ8NQksSeVPocc9Sfx7H8h3pJflZT0GPzPbqPT1IHvR19dfyX9f8ADivbfy/HQ6Hw14n8 R+C/EGjeLfCGu6r4Z8TeHdQtdW0LXtCvrjTNX0nUrKUTW17YX9pJFcWtxBIgZJIpFZSMfMDiv7pf +CLf/Bat/wBrSbS/2Yf2nLzTtM/aDsNLI8E+PA0Gn6d8YbTTYcz2N7ZgR29h4+trSNryaG1CWfiG CK5u7O3trqKW2k/g7DfL1yfQcd8DHHHrjGa3/C3ifxD4J8S6F4x8I61qPh3xR4X1Ww13QNd0m6ls 9S0jV9NuUvLDULK6hZZILm1uYkljdW+8oyCCQWM/19aK/Jv/AII+/wDBQ+H/AIKC/syQeIfFBsbL 42/C66svBnxc0y0ZI49Rv/sQl0XxvY2gO6207xbaQzzPCAYrXWbLV7OFmgghZv1koAKKKKACiiig AooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKAC iiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKK KKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooo oAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiigAooooAKKKKACiiig AooooAKKKKACiiigLine truncated
|
||||
id="image1-6"
|
||||
x="97.091873"
|
||||
y="25.749657"
|
||||
style="stroke-width:3.98621" /><text
|
||||
xml:space="preserve"
|
||||
style="font-size:3.52777px;line-height:1.25;font-family:'Latin Modern Roman';-inkscape-font-specification:'Latin Modern Roman, Normal';text-align:end;text-anchor:end;stroke-width:0.264583"
|
||||
x="115.66432"
|
||||
y="33.438759"
|
||||
id="text1"><tspan
|
||||
sodipodi:role="line"
|
||||
id="tspan1"
|
||||
style="text-align:center;text-anchor:middle;stroke-width:0.264583"
|
||||
x="115.66432"
|
||||
y="33.438759">Cylindrical</tspan><tspan
|
||||
sodipodi:role="line"
|
||||
style="text-align:center;text-anchor:middle;stroke-width:0.264583"
|
||||
x="115.66432"
|
||||
y="37.848473"
|
||||
id="tspan2">Washers</tspan></text><path
|
||||
style="fill:none;stroke:#000000;stroke-width:0.265;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#ConcaveTriangle)"
|
||||
d="m 115.72253,38.897386 v 4.32375 l 5.13394,5.133939"
|
||||
id="path2" /><path
|
||||
style="fill:none;stroke:#000000;stroke-width:0.265;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#ConcaveTriangle)"
|
||||
d="m 115.72253,43.221136 v 5.779707 l 3.19266,3.192662"
|
||||
id="path3" /></g></svg>
|
||||
|
After Width: | Height: | Size: 187 KiB |
@@ -252,29 +252,43 @@ CLOSED: [2025-04-21 Mon 14:13]
|
||||
[[file:figs/detail_design_nano_hexapod_elements.png]]
|
||||
|
||||
|
||||
*Design goals*:
|
||||
- Position =bi= and =si=
|
||||
- Maximum height of 95mm
|
||||
- As close as possible to "perfect" stewart platform: flexible modes at high frequency
|
||||
- Easy mounting, easy change of strut in case of failure
|
||||
Detail design phase:
|
||||
- key elements were optimized such as: actuator and flexible joints
|
||||
- relative motion sensor (an encoder) was also selected
|
||||
- specific kinematics of the Stewart platform (i.e. position of joints and orientation of struts) was not found to be too critical for this application.
|
||||
Yet, the geometry was fixed in Section [...]
|
||||
|
||||
In this section, the mechanical design of the active platform, shown in Figure ref:fig:detail_design_nano_hexapod_elements, is detailed.
|
||||
|
||||
Presentation of the obtained design:
|
||||
- Fixation
|
||||
- Section on: Complete strut
|
||||
- Cable management
|
||||
- Plates design
|
||||
- FEM results
|
||||
- Explain again the different specifications in terms of space, payload, etc..
|
||||
- CAD view of the nano-hexapod
|
||||
- Chosen geometry, materials, ease of mounting, cabling, ...
|
||||
- Validation on Simscape with accurate model?
|
||||
The main design objectives are:
|
||||
- Well defined kinematics: Good positioning of the top flexible joint rotation point $\bm{b}_i$ and correct orientation of the struts $\hat{\bm{s}}_i$.
|
||||
The goal is to have a well defined geometry such that the Jacobian matrix is well defined.
|
||||
- Space constrains: it should fit within a cylinder with radius of $120\,\text{mm}$ and height of $95\,\text{mm}$
|
||||
- As good performances were obtained with the multi-body model.
|
||||
The final design should behave as close as possible to "perfect" stewart platform.
|
||||
This means that the frequency of flexible modes that could be problematic for control must be made as high as possible.
|
||||
- Easy mounting and alignment.
|
||||
- Easy maintenance: the struts should be easily changed in case for failure.
|
||||
|
||||
* Mechanical Design
|
||||
<<sec:detail_design_mechanics>>
|
||||
|
||||
** Struts
|
||||
**** Introduction :ignore:
|
||||
**** Struts
|
||||
|
||||
The strut design is shown in Figure ref:fig:detail_design_strut.
|
||||
|
||||
The design of the struts was driven by:
|
||||
- having stiff interface between the amplified piezoelectric actuator and the two flexible joints
|
||||
- having stiff interface between the flexible joints and the two places (discussed afterwards)
|
||||
- Because the angular stroke of the flexible joints is fairly limited, it is important to be able to mount the strut such that the two cylindrical interfaces are coaxial.
|
||||
Do to so:
|
||||
- A mounting bench was designed
|
||||
The mounting procedure will be described in Section [...]
|
||||
# TODO - Add link to section
|
||||
- Cylindrical washers, shown in Figure ref:fig:detail_design_strut_without_enc, were integrated to allow for adjustments.
|
||||
The issue was that the flatness between the two interface planes of the APA shown in Figure ref:fig:detail_design_apa could not be guaranteed.
|
||||
With the added cylindrical washers and the mounting tool, it should be possible to well align the struts even in the presence of machining inaccuracies.
|
||||
- Possibility to fix the encoder parallel to the strut, as shown in Figure ref:fig:detail_design_strut_with_enc
|
||||
|
||||
#+name: fig:detail_design_strut
|
||||
#+caption: Design of the Nano-Hexapod struts. Before (\subref{fig:detail_design_strut_without_enc}) and after (\subref{fig:detail_design_strut_with_enc}) encoder integration.
|
||||
@@ -283,65 +297,88 @@ Presentation of the obtained design:
|
||||
#+attr_latex: :caption \subcaption{\label{fig:detail_design_strut_without_enc}Before encoder integration}
|
||||
#+attr_latex: :options {0.49\textwidth}
|
||||
#+begin_subfigure
|
||||
#+attr_latex: :width 0.95\linewidth
|
||||
[[file:figs/detail_design_strut_without_enc.jpg]]
|
||||
#+attr_latex: :scale 0.9
|
||||
[[file:figs/detail_design_strut_without_enc.png]]
|
||||
#+end_subfigure
|
||||
#+attr_latex: :caption \subcaption{\label{fig:detail_design_strut_with_enc}With the mounted encoder}
|
||||
#+attr_latex: :options {0.49\textwidth}
|
||||
#+begin_subfigure
|
||||
#+attr_latex: :width 0.95\linewidth
|
||||
[[file:figs/detail_design_strut_with_enc.jpg]]
|
||||
#+attr_latex: :scale 0.9
|
||||
[[file:figs/detail_design_strut_with_enc.png]]
|
||||
#+end_subfigure
|
||||
#+end_figure
|
||||
|
||||
**** Flexible joints
|
||||
The flexible joints are manufactured using wire-cut electrical discharge machining, allowing for:
|
||||
- very tight tolerances:
|
||||
- allowing good location of the center of rotation with respect to the plate interfaces (red surfaces shown in Figure ref:fig:detail_design_flexible_joint)
|
||||
- allowing correct neck dimension to have the wanted properties (stiffness and angular stroke)
|
||||
- Such part is fragile, mainly due to its small "neck" dimension of only $0.25\,\text{mm}$
|
||||
Such machining technique has little to no cutting forces.
|
||||
|
||||
Flexible joints: X5CrNiCuNb16-4 (F16Ph)
|
||||
- high yield strength: specified >1GPa using heat treatment
|
||||
- high fatigue resistance
|
||||
The flexible joints are made from a stainless steel referenced as "X5CrNiCuNb16-4" (also called "F16Ph").
|
||||
This material is chosen for:
|
||||
- its high yield strength: specified >1GPa using heat treatment.
|
||||
- its high fatigue resistance
|
||||
|
||||
Figure ref:fig:detail_design_flexible_joint
|
||||
- Interface with the APA has a cylindrical shape to allow the use of cylindrical washers
|
||||
A slotted hole has been added to align the flexible joint with the APA using a dowel pin.
|
||||
- Two threaded holes on the sides can be used to mount the encoders
|
||||
- The interface with the plate will be latter described.
|
||||
|
||||
The amplified piezoelectric actuators are APA300ML.
|
||||
Modification of the mechanical interfaces were asked to the manufacturer.
|
||||
Two planes surfaces and a dowel hole were used, as shown in Figure ref:fig:detail_design_apa.
|
||||
The amplifying structure, is also made of stainless steel.
|
||||
|
||||
#+name: fig:detail_design_apa_joints
|
||||
#+caption: Two main components of the struts: the amplified piezoelectric actuator (\subref{fig:detail_design_apa}) and the flexible joint (\subref{fig:detail_design_flexible_joint}).
|
||||
#+caption: Two main components of the struts: the flexible joint (\subref{fig:detail_design_flexible_joint}) and the amplified piezoelectric actuator (\subref{fig:detail_design_apa}).
|
||||
#+attr_latex: :options [htbp]
|
||||
#+begin_figure
|
||||
#+attr_latex: :caption \subcaption{\label{fig:detail_design_apa}Amplified Piezoelectric Actuator}
|
||||
#+attr_latex: :options {0.49\textwidth}
|
||||
#+begin_subfigure
|
||||
#+attr_latex: :scale 1
|
||||
[[file:figs/detail_design_apa.png]]
|
||||
#+end_subfigure
|
||||
#+attr_latex: :caption \subcaption{\label{fig:detail_design_flexible_joint}Flexible joint}
|
||||
#+attr_latex: :options {0.49\textwidth}
|
||||
#+begin_subfigure
|
||||
#+attr_latex: :scale 1
|
||||
[[file:figs/detail_design_flexible_joint.png]]
|
||||
#+end_subfigure
|
||||
#+attr_latex: :caption \subcaption{\label{fig:detail_design_apa}Amplified Piezoelectric Actuator}
|
||||
#+attr_latex: :options {0.49\textwidth}
|
||||
#+begin_subfigure
|
||||
#+attr_latex: :scale 1
|
||||
[[file:figs/detail_design_apa.png]]
|
||||
#+end_subfigure
|
||||
#+end_figure
|
||||
|
||||
**** Piezoelectric Amplified Actuators
|
||||
To correctly measure the relative motion of each strut, the encoders need to measure the relative motion between the two flexible joint's rotational centers.
|
||||
Two interface parts, made of aluminum, are used to fix the encoder and ruler to the two fleible joints as shown in Figure ref:fig:detail_design_strut_with_enc.
|
||||
|
||||
APA: modification for better mounting
|
||||
**** Plates
|
||||
|
||||
**** Encoder support
|
||||
The two plates of the active platform were designed to:
|
||||
- Maximize the frequency of flexible modes
|
||||
- have good positioning of the top flexible joints, and good/known orientation of the struts.
|
||||
|
||||
All other parts are made of aluminum.
|
||||
|
||||
** Plates
|
||||
|
||||
Plates: X30Cr13
|
||||
- high hardness to not deform
|
||||
|
||||
|
||||
- Maximize frequency of flexible modes (show FEM)
|
||||
- Good tolerances for interfaces with flexible joints
|
||||
Positioning of =bi= and orientation =si=
|
||||
To maximize the flexible joints, finite element analysis were used iteratively.
|
||||
While topology optimization could have been used, a network of reinforcing ribs was used as shown in Figure ref:fig:detail_design_top_plate.
|
||||
|
||||
#+name: fig:detail_design_top_plate
|
||||
#+caption: The mechanical design for the top platform incorporates precisely positioned V-grooves for the joint interfaces (displayed in red). The purpose of the encoder interface (shown in green) is detailed later.
|
||||
#+attr_latex: :scale 1
|
||||
[[file:figs/detail_design_top_plate.png]]
|
||||
|
||||
The cylindrical component is located (or constrained) within the V-groove via two distinct line contacts.
|
||||
|
||||
The fixation interface for the joints and "V-grooves".
|
||||
The cylindrical part of the flexible joint is located (or constrained) within the V-groove via two distinct line contacts (Figure ref:fig:detail_design_fixation_flexible_joints).
|
||||
Therefore, these grooves are defining the initial strut orientation
|
||||
High machining accuracy is required, such that during the mounting of the active platform, the flexible joints are that "rest" position
|
||||
|
||||
The "flat" interface of each top flexible joint is also in contact with the top platform, as shown in Figure ref:fig:detail_design_location_top_flexible_joints, such that the center of rotation of the top flexible joints $\bm{b}_i$ are well located with respect to the top platform.
|
||||
|
||||
The bottom flexible joints are not Figure ref:fig:detail_design_location_bot_flex
|
||||
|
||||
The two plates are made with a martensitic stainless steel "X30Cr13":
|
||||
- It has high hardness, such that the reference surfaces to not deform when fixing the flexible joints
|
||||
- This should allow to assemble and disassemble the struts many times if necessary
|
||||
|
||||
#+name: fig:detail_design_fixation_flexible_joints
|
||||
#+caption: Fixation of the flexible points to the nano-hexapod plates. Both top and bottom flexible joints are clamped to the plates as shown in (\subref{fig:detail_design_fixation_flexible_joints}). While the top flexible joint is in contact with the top plate for precise positioning of its center of rotation (\subref{fig:detail_design_location_top_flexible_joints}), the bottom joint is just oriented (\subref{fig:detail_design_location_bot_flex}).
|
||||
@@ -366,45 +403,58 @@ The cylindrical component is located (or constrained) within the V-groove via tw
|
||||
#+end_subfigure
|
||||
#+end_figure
|
||||
|
||||
** Finite Element Analysis
|
||||
**** Finite Element Analysis
|
||||
|
||||
# TODO - Maybe this picture is not necessary
|
||||
# #+name: fig:detail_design_enc_struts
|
||||
# #+caption: Obtained Nano-Hexapod design
|
||||
# #+attr_latex: :width 0.9\linewidth
|
||||
# [[file:figs/detail_design_enc_struts.jpg]]
|
||||
|
||||
#+name: fig:detail_design_enc_struts
|
||||
#+caption: Obtained Nano-Hexapod design
|
||||
#+attr_latex: :width 0.9\linewidth
|
||||
[[file:figs/detail_design_enc_struts.jpg]]
|
||||
|
||||
- FEM of complete system
|
||||
- Show modes of the struts
|
||||
Finite element analysis of the complete active platform was performed to identify problematic modes (Figure ref:fig:detail_design_fem_nano_hexapod):
|
||||
- First six modes were found to be "suspension" modes were the top plate moves as a rigid body, and the six struts are only moving axially (Figure ref:fig:detail_design_fem_rigid_body_mode)
|
||||
- Then, between $205\,\text{Hz}$ and $420\,\text{Hz}$ many "local" modes of the struts were observed.
|
||||
On is represented in Figure ref:fig:detail_design_fem_strut_mode.
|
||||
While these modes seem not to induce any motion of the top platform, it induces a relative displacement of the encoder with respect to the ruler.
|
||||
Therefore, when controlling the position of the active platform using the encoders, such modes could be problematic.
|
||||
Whether these modes are problematic is difficult to estimate at this point as:
|
||||
- it is not known if the APA will "excite" these modes
|
||||
- theoretically, if the struts are well aligned, these modes should not be observed
|
||||
Then, flexible modes of the top plate are appearing above $650\,\text{Hz}$ (Figure ref:fig:detail_design_fem_plate_mode)
|
||||
|
||||
#+name: fig:detail_design_fem_nano_hexapod
|
||||
#+caption: Measurement of strut flexible modes. First six modes are "suspension" modes in which the top plate behaves as a rigid body (\subref{fig:detail_design_fem_rigid_body_mode}). Then modes of the struts have natural frequencies from $205\,\text{Hz}$ to $420\,\text{Hz}$ (\subref{fig:detail_design_fem_strut_mode}). Finally, the first flexible mode of the top plate is at $650\,\text{Hz}$ (\subref{fig:detail_design_fem_plate_mode})
|
||||
#+attr_latex: :options [htbp]
|
||||
#+begin_figure
|
||||
#+attr_latex: :caption \subcaption{\label{fig:detail_design_fem_rigid_body_mode}Suspension modes}
|
||||
#+attr_latex: :options {0.33\textwidth}
|
||||
#+attr_latex: :caption \subcaption{\label{fig:detail_design_fem_rigid_body_mode}Suspension mode}
|
||||
#+attr_latex: :options {0.36\textwidth}
|
||||
#+begin_subfigure
|
||||
#+attr_latex: :width 0.9\linewidth
|
||||
#+attr_latex: :width 0.95\linewidth
|
||||
[[file:figs/detail_design_fem_rigid_body_mode.jpg]]
|
||||
#+end_subfigure
|
||||
#+attr_latex: :caption \subcaption{\label{fig:detail_design_fem_strut_mode}Strut - Local modes}
|
||||
#+attr_latex: :options {0.33\textwidth}
|
||||
#+attr_latex: :caption \subcaption{\label{fig:detail_design_fem_strut_mode}Strut - Local mode}
|
||||
#+attr_latex: :options {0.36\textwidth}
|
||||
#+begin_subfigure
|
||||
#+attr_latex: :width 0.9\linewidth
|
||||
#+attr_latex: :width 0.95\linewidth
|
||||
[[file:figs/detail_design_fem_strut_mode.jpg]]
|
||||
#+end_subfigure
|
||||
#+attr_latex: :caption \subcaption{\label{fig:detail_design_fem_plate_mode}Top plate modes}
|
||||
#+attr_latex: :options {0.33\textwidth}
|
||||
#+attr_latex: :caption \subcaption{\label{fig:detail_design_fem_plate_mode}Top plate mode}
|
||||
#+attr_latex: :options {0.26\textwidth}
|
||||
#+begin_subfigure
|
||||
#+attr_latex: :width 0.9\linewidth
|
||||
#+attr_latex: :width 0.95\linewidth
|
||||
[[file:figs/detail_design_fem_plate_mode.jpg]]
|
||||
#+end_subfigure
|
||||
#+end_figure
|
||||
|
||||
** Obtained Design
|
||||
**** Alternative Encoder Placement
|
||||
|
||||
- Alternative encoder position: on the plates
|
||||
- Support made of aluminum
|
||||
To anticipate potential issue with local modes of the struts, an alternative fixation for the encoder is planned:
|
||||
- Instead of being fixed to the struts, the encoders are fixed to the plates instead, as shown in Figure ref:fig:detail_design_enc_plates_design.
|
||||
- The support are made of aluminum, and it is verified that the natural modes are at high enough frequency (Figure ref:fig:detail_design_enc_support_modes).
|
||||
- The positioning of the encoders are made using pockets in both plates as shown in Figure ref:fig:detail_design_top_plate.
|
||||
- The encoders are aligned parallel to the struts, but yet they don't exactly measure the relative motion of each strut.
|
||||
- This means that if relative motion of the active platform is performed based on the encoders, the accuracy of the motion may be affected.
|
||||
The issue is that the Kinematics may not be correct.
|
||||
|
||||
#+name: fig:detail_design_enc_plates_design
|
||||
#+caption: Alternative way of using the encoders: they are fixed directly to the plates.
|
||||
@@ -424,30 +474,42 @@ The cylindrical component is located (or constrained) within the V-groove via tw
|
||||
#+end_subfigure
|
||||
#+end_figure
|
||||
|
||||
|
||||
#+name: fig:detail_design_fem_encoder_fix
|
||||
#+name: fig:detail_design_enc_support_modes
|
||||
#+caption: Finite Element Analysis of the encoder supports. Encoder inertia was taken into account.
|
||||
[[file:figs/detail_design_fem_encoder_fix.png]]
|
||||
#+attr_latex: :options [htbp]
|
||||
#+begin_figure
|
||||
#+attr_latex: :caption \subcaption{\label{fig:detail_design_enc_support_mode_1}$1^{\text{st}}$ mode at $1120\,\text{Hz}$}
|
||||
#+attr_latex: :options {0.33\textwidth}
|
||||
#+begin_subfigure
|
||||
#+attr_latex: :scale 0.5
|
||||
[[file:figs/detail_design_enc_support_mode_1.jpg]]
|
||||
#+end_subfigure
|
||||
#+attr_latex: :caption \subcaption{\label{fig:detail_design_enc_support_mode_2}$2^{\text{nd}}$ mode at $2020\,\text{Hz}$}
|
||||
#+attr_latex: :options {0.33\textwidth}
|
||||
#+begin_subfigure
|
||||
#+attr_latex: :scale 0.5
|
||||
[[file:figs/detail_design_enc_support_mode_2.jpg]]
|
||||
#+end_subfigure
|
||||
#+attr_latex: :caption \subcaption{\label{fig:detail_design_enc_support_mode_3}$3^{\text{rd}}$ mode at $2080\,\text{Hz}$}
|
||||
#+attr_latex: :options {0.33\textwidth}
|
||||
#+begin_subfigure
|
||||
#+attr_latex: :scale 0.5
|
||||
[[file:figs/detail_design_enc_support_mode_3.jpg]]
|
||||
#+end_subfigure
|
||||
#+end_figure
|
||||
|
||||
* Multi-Body Model
|
||||
:PROPERTIES:
|
||||
:HEADER-ARGS:matlab+: :tangle matlab/detail_design_1_model.m
|
||||
:END:
|
||||
<<sec:detail_design_model>>
|
||||
**** Introduction :ignore:
|
||||
|
||||
*Multi body Model*:
|
||||
- Complete model: two plates, 6 joints, 6 actuators, 6 encoders
|
||||
- Joint Model
|
||||
- APA Model
|
||||
- Encoder model
|
||||
- Say that obtained dynamics was considered good + possible to perform simulations of tomography experiments with same performance as during the conceptual design
|
||||
Before all the mechanical parts were ordered, the multi-body model of the active platform was refined using the design parts.
|
||||
|
||||
** Introduction :ignore:
|
||||
|
||||
Two configurations:
|
||||
Two configurations, displayed in Figure ref:fig:detail_design_simscape_encoder, were considered:
|
||||
- Encoders fixed to the struts
|
||||
- Encoders fixed to the plates
|
||||
|
||||
Plates were modelled as rigid bodies, with inertia computed from the 3D shape.
|
||||
|
||||
#+name: fig:detail_design_simscape_encoder
|
||||
#+caption: 3D representation of the multi-body model. There are two configurations: encoders fixed to the struts (\subref{fig:detail_design_simscape_encoder_struts}) and encoders fixed to the plates (\subref{fig:detail_design_simscape_encoder_plates}).
|
||||
#+attr_latex: :options [htbp]
|
||||
@@ -466,19 +528,45 @@ Two configurations:
|
||||
#+end_subfigure
|
||||
#+end_figure
|
||||
|
||||
**** Flexible Joints
|
||||
|
||||
** Flexible Joints
|
||||
Different models of the flexible joints where considered:
|
||||
- 2DoF: only bending stiffnesses
|
||||
- 3DoF: added torsional stiffness
|
||||
- 4DoF: added axial stiffness
|
||||
|
||||
The multi-body model for the 4DoF configuration is shown in Figure ref:fig:detail_design_simscape_model_flexible_joint.
|
||||
It is composed of three solid bodies connected by joints whose stiffnesses are computed from the finite element model.
|
||||
|
||||
#+name: fig:detail_design_simscape_model_flexible_joint
|
||||
#+caption: Multi-Body (using the Simscape software) model of the flexible joints. A 4-DoFs model is shown.
|
||||
#+attr_latex: :scale 1
|
||||
[[file:figs/detail_design_simscape_model_flexible_joint.png]]
|
||||
|
||||
** Amplified Piezoelectric Actuators
|
||||
**** Amplified Piezoelectric Actuators
|
||||
|
||||
The amplified piezoelectric actuators are modelled as explained in Section [..].
|
||||
# Add link to section
|
||||
Two different models can be used in the multi-body model:
|
||||
- a 2DoF "axial" model
|
||||
- a "super-element" extracted from the finite element model
|
||||
|
||||
**** Encoders
|
||||
|
||||
Up to now, relative displacement sensors were implemented as a relative distance measurement between $\bm{a}_i$ and $\bm{b}_i$.
|
||||
|
||||
As shown in the previous section, flexible modes of the struts may negatively impact the encoder signal.
|
||||
It was therefore necessary to better model the encoder.
|
||||
|
||||
The optical encoder works:
|
||||
- Encoder heads contains a light source shine on the ruler, and a photo-diode.
|
||||
This is represented by frame $\{E\}$ in Figure ref:fig:detail_design_simscape_encoder.
|
||||
- ruler or scale with a grating (here with a $20\,\mu m$ pitch). A reference frame is indicated by $\{R\}$
|
||||
|
||||
Therefore, the measured displacement is the relative position of $\{E\}$ (i.e. there the light "hits" the scale) with respect to frame $\{R\}$, in the direction of the scale.
|
||||
|
||||
|
||||
|
||||
** Encoders
|
||||
In that case, a rotation of the encoder, as shown in figure ref:fig:detail_design_simscape_encoder_disp induces a measured displacement.
|
||||
|
||||
#+name: fig:detail_design_simscape_encoder_model
|
||||
#+caption: Representation of the encoder model in the multi-body model. Measurement $d_i$ corresponds to the $x$ position of the encoder frame $\{E\}$ expresssed in the ruller frame $\{R\}$ (\subref{fig:detail_design_simscape_encoder}). A rotation of the encoder therefore induces a measured displacement (\subref{fig:detail_design_simscape_encoder_disp}).
|
||||
@@ -498,6 +586,14 @@ Two configurations:
|
||||
#+end_subfigure
|
||||
#+end_figure
|
||||
|
||||
**** Simulation
|
||||
|
||||
Based on this refined model:
|
||||
- the active platform could be integrated on top of the micro-station's model.
|
||||
- the obtained dynamics was considered good
|
||||
- simulations of tomography experiments were performed, and similar performance were obtained as during the conceptual design
|
||||
- this is not presented here as results are very similar to the simulations performed in Section [...]
|
||||
# Add link to section
|
||||
|
||||
* Conclusion
|
||||
<<sec:detail_design_conclusion>>
|
||||
@@ -505,24 +601,3 @@ Two configurations:
|
||||
* Bibliography :ignore:
|
||||
#+latex: \printbibliography[heading=bibintoc,title={Bibliography}]
|
||||
|
||||
* Helping Functions :noexport:
|
||||
** Initialize Path
|
||||
#+NAME: m-init-path
|
||||
#+BEGIN_SRC matlab
|
||||
%% Path for functions, data and scripts
|
||||
addpath('./matlab/mat/'); % Path for data
|
||||
addpath('./matlab/'); % Path for scripts
|
||||
#+END_SRC
|
||||
|
||||
#+NAME: m-init-path-tangle
|
||||
#+BEGIN_SRC matlab
|
||||
%% Path for functions, data and scripts
|
||||
addpath('./mat/'); % Path for data
|
||||
#+END_SRC
|
||||
|
||||
** Initialize other elements
|
||||
#+NAME: m-init-other
|
||||
#+BEGIN_SRC matlab
|
||||
%% Colors for the figures
|
||||
colors = colororder;
|
||||
#+END_SRC
|
||||
@@ -1,4 +1,4 @@
|
||||
% Created 2025-04-21 Mon 16:49
|
||||
% Created 2025-04-21 Mon 19:46
|
||||
% Intended LaTeX compiler: pdflatex
|
||||
\documentclass[a4paper, 10pt, DIV=12, parskip=full, bibliography=totoc]{scrreprt}
|
||||
|
||||
@@ -30,87 +30,124 @@
|
||||
\end{figure}
|
||||
|
||||
|
||||
\textbf{Design goals}:
|
||||
Detail design phase:
|
||||
\begin{itemize}
|
||||
\item Position \texttt{bi} and \texttt{si}
|
||||
\item Maximum height of 95mm
|
||||
\item As close as possible to ``perfect'' stewart platform: flexible modes at high frequency
|
||||
\item Easy mounting, easy change of strut in case of failure
|
||||
\item key elements were optimized such as: actuator and flexible joints
|
||||
\item relative motion sensor (an encoder) was also selected
|
||||
\item specific kinematics of the Stewart platform (i.e. position of joints and orientation of struts) was not found to be too critical for this application.
|
||||
Yet, the geometry was fixed in Section [\ldots{}]
|
||||
\end{itemize}
|
||||
|
||||
In this section, the mechanical design of the active platform, shown in Figure \ref{fig:detail_design_nano_hexapod_elements}, is detailed.
|
||||
|
||||
Presentation of the obtained design:
|
||||
The main design objectives are:
|
||||
\begin{itemize}
|
||||
\item Fixation
|
||||
\item Section on: Complete strut
|
||||
\item Cable management
|
||||
\item Plates design
|
||||
\item FEM results
|
||||
\item Explain again the different specifications in terms of space, payload, etc..
|
||||
\item CAD view of the nano-hexapod
|
||||
\item Chosen geometry, materials, ease of mounting, cabling, \ldots{}
|
||||
\item Validation on Simscape with accurate model?
|
||||
\item Well defined kinematics: Good positioning of the top flexible joint rotation point \(\bm{b}_i\) and correct orientation of the struts \(\hat{\bm{s}}_i\).
|
||||
The goal is to have a well defined geometry such that the Jacobian matrix is well defined.
|
||||
\item Space constrains: it should fit within a cylinder with radius of \(120\,\text{mm}\) and height of \(95\,\text{mm}\)
|
||||
\item As good performances were obtained with the multi-body model.
|
||||
The final design should behave as close as possible to ``perfect'' stewart platform.
|
||||
This means that the frequency of flexible modes that could be problematic for control must be made as high as possible.
|
||||
\item Easy mounting and alignment.
|
||||
\item Easy maintenance: the struts should be easily changed in case for failure.
|
||||
\end{itemize}
|
||||
\chapter{Mechanical Design}
|
||||
\label{sec:detail_design_mechanics}
|
||||
\section{Struts}
|
||||
\subsubsection{Struts}
|
||||
|
||||
The strut design is shown in Figure \ref{fig:detail_design_strut}.
|
||||
|
||||
The design of the struts was driven by:
|
||||
\begin{itemize}
|
||||
\item having stiff interface between the amplified piezoelectric actuator and the two flexible joints
|
||||
\item having stiff interface between the flexible joints and the two places (discussed afterwards)
|
||||
\item Because the angular stroke of the flexible joints is fairly limited, it is important to be able to mount the strut such that the two cylindrical interfaces are coaxial.
|
||||
Do to so:
|
||||
\begin{itemize}
|
||||
\item A mounting bench was designed
|
||||
The mounting procedure will be described in Section [\ldots{}]
|
||||
\item Cylindrical washers, shown in Figure \ref{fig:detail_design_strut_without_enc}, were integrated to allow for adjustments.
|
||||
The issue was that the flatness between the two interface planes of the APA shown in Figure \ref{fig:detail_design_apa} could not be guaranteed.
|
||||
With the added cylindrical washers and the mounting tool, it should be possible to well align the struts even in the presence of machining inaccuracies.
|
||||
\end{itemize}
|
||||
\item Possibility to fix the encoder parallel to the strut, as shown in Figure \ref{fig:detail_design_strut_with_enc}
|
||||
\end{itemize}
|
||||
|
||||
\begin{figure}[htbp]
|
||||
\begin{subfigure}{0.49\textwidth}
|
||||
\begin{center}
|
||||
\includegraphics[scale=1,width=0.95\linewidth]{figs/detail_design_strut_without_enc.jpg}
|
||||
\includegraphics[scale=1,scale=0.9]{figs/detail_design_strut_without_enc.png}
|
||||
\end{center}
|
||||
\subcaption{\label{fig:detail_design_strut_without_enc}Before encoder integration}
|
||||
\end{subfigure}
|
||||
\begin{subfigure}{0.49\textwidth}
|
||||
\begin{center}
|
||||
\includegraphics[scale=1,width=0.95\linewidth]{figs/detail_design_strut_with_enc.jpg}
|
||||
\includegraphics[scale=1,scale=0.9]{figs/detail_design_strut_with_enc.png}
|
||||
\end{center}
|
||||
\subcaption{\label{fig:detail_design_strut_with_enc}With the mounted encoder}
|
||||
\end{subfigure}
|
||||
\caption{\label{fig:detail_design_strut}Design of the Nano-Hexapod struts. Before (\subref{fig:detail_design_strut_without_enc}) and after (\subref{fig:detail_design_strut_with_enc}) encoder integration.}
|
||||
\end{figure}
|
||||
\subsubsection{Flexible joints}
|
||||
|
||||
Flexible joints: X5CrNiCuNb16-4 (F16Ph)
|
||||
The flexible joints are manufactured using wire-cut electrical discharge machining, allowing for:
|
||||
\begin{itemize}
|
||||
\item high yield strength: specified >1GPa using heat treatment
|
||||
\item high fatigue resistance
|
||||
\item very tight tolerances:
|
||||
\begin{itemize}
|
||||
\item allowing good location of the center of rotation with respect to the plate interfaces (red surfaces shown in Figure \ref{fig:detail_design_flexible_joint})
|
||||
\item allowing correct neck dimension to have the wanted properties (stiffness and angular stroke)
|
||||
\end{itemize}
|
||||
\item Such part is fragile, mainly due to its small ``neck'' dimension of only \(0.25\,\text{mm}\)
|
||||
Such machining technique has little to no cutting forces.
|
||||
\end{itemize}
|
||||
|
||||
The flexible joints are made from a stainless steel referenced as ``X5CrNiCuNb16-4'' (also called ``F16Ph'').
|
||||
This material is chosen for:
|
||||
\begin{itemize}
|
||||
\item its high yield strength: specified >1GPa using heat treatment.
|
||||
\item its high fatigue resistance
|
||||
\end{itemize}
|
||||
|
||||
Figure \ref{fig:detail_design_flexible_joint}
|
||||
\begin{itemize}
|
||||
\item Interface with the APA has a cylindrical shape to allow the use of cylindrical washers
|
||||
A slotted hole has been added to align the flexible joint with the APA using a dowel pin.
|
||||
\item Two threaded holes on the sides can be used to mount the encoders
|
||||
\item The interface with the plate will be latter described.
|
||||
\end{itemize}
|
||||
|
||||
The amplified piezoelectric actuators are APA300ML.
|
||||
Modification of the mechanical interfaces were asked to the manufacturer.
|
||||
Two planes surfaces and a dowel hole were used, as shown in Figure \ref{fig:detail_design_apa}.
|
||||
The amplifying structure, is also made of stainless steel.
|
||||
|
||||
\begin{figure}[htbp]
|
||||
\begin{subfigure}{0.49\textwidth}
|
||||
\begin{center}
|
||||
\includegraphics[scale=1,scale=1]{figs/detail_design_apa.png}
|
||||
\end{center}
|
||||
\subcaption{\label{fig:detail_design_apa}Amplified Piezoelectric Actuator}
|
||||
\end{subfigure}
|
||||
\begin{subfigure}{0.49\textwidth}
|
||||
\begin{center}
|
||||
\includegraphics[scale=1,scale=1]{figs/detail_design_flexible_joint.png}
|
||||
\end{center}
|
||||
\subcaption{\label{fig:detail_design_flexible_joint}Flexible joint}
|
||||
\end{subfigure}
|
||||
\caption{\label{fig:detail_design_apa_joints}Two main components of the struts: the amplified piezoelectric actuator (\subref{fig:detail_design_apa}) and the flexible joint (\subref{fig:detail_design_flexible_joint}).}
|
||||
\begin{subfigure}{0.49\textwidth}
|
||||
\begin{center}
|
||||
\includegraphics[scale=1,scale=1]{figs/detail_design_apa.png}
|
||||
\end{center}
|
||||
\subcaption{\label{fig:detail_design_apa}Amplified Piezoelectric Actuator}
|
||||
\end{subfigure}
|
||||
\caption{\label{fig:detail_design_apa_joints}Two main components of the struts: the flexible joint (\subref{fig:detail_design_flexible_joint}) and the amplified piezoelectric actuator (\subref{fig:detail_design_apa}).}
|
||||
\end{figure}
|
||||
\subsubsection{Piezoelectric Amplified Actuators}
|
||||
|
||||
APA: modification for better mounting
|
||||
\subsubsection{Encoder support}
|
||||
To correctly measure the relative motion of each strut, the encoders need to measure the relative motion between the two flexible joint's rotational centers.
|
||||
Two interface parts, made of aluminum, are used to fix the encoder and ruler to the two fleible joints as shown in Figure \ref{fig:detail_design_strut_with_enc}.
|
||||
\subsubsection{Plates}
|
||||
|
||||
All other parts are made of aluminum.
|
||||
\section{Plates}
|
||||
|
||||
Plates: X30Cr13
|
||||
The two plates of the active platform were designed to:
|
||||
\begin{itemize}
|
||||
\item high hardness to not deform
|
||||
\item Maximize the frequency of flexible modes
|
||||
\item have good positioning of the top flexible joints, and good/known orientation of the struts.
|
||||
\end{itemize}
|
||||
|
||||
|
||||
\begin{itemize}
|
||||
\item Maximize frequency of flexible modes (show FEM)
|
||||
\item Good tolerances for interfaces with flexible joints
|
||||
Positioning of \texttt{bi} and orientation \texttt{si}
|
||||
\end{itemize}
|
||||
To maximize the flexible joints, finite element analysis were used iteratively.
|
||||
While topology optimization could have been used, a network of reinforcing ribs was used as shown in Figure \ref{fig:detail_design_top_plate}.
|
||||
|
||||
\begin{figure}[htbp]
|
||||
\centering
|
||||
@@ -118,7 +155,21 @@ Positioning of \texttt{bi} and orientation \texttt{si}
|
||||
\caption{\label{fig:detail_design_top_plate}The mechanical design for the top platform incorporates precisely positioned V-grooves for the joint interfaces (displayed in red). The purpose of the encoder interface (shown in green) is detailed later.}
|
||||
\end{figure}
|
||||
|
||||
The cylindrical component is located (or constrained) within the V-groove via two distinct line contacts.
|
||||
|
||||
The fixation interface for the joints and ``V-grooves''.
|
||||
The cylindrical part of the flexible joint is located (or constrained) within the V-groove via two distinct line contacts (Figure \ref{fig:detail_design_fixation_flexible_joints}).
|
||||
Therefore, these grooves are defining the initial strut orientation
|
||||
High machining accuracy is required, such that during the mounting of the active platform, the flexible joints are that ``rest'' position
|
||||
|
||||
The ``flat'' interface of each top flexible joint is also in contact with the top platform, as shown in Figure \ref{fig:detail_design_location_top_flexible_joints}, such that the center of rotation of the top flexible joints \(\bm{b}_i\) are well located with respect to the top platform.
|
||||
|
||||
The bottom flexible joints are not Figure \ref{fig:detail_design_location_bot_flex}
|
||||
|
||||
The two plates are made with a martensitic stainless steel ``X30Cr13'':
|
||||
\begin{itemize}
|
||||
\item It has high hardness, such that the reference surfaces to not deform when fixing the flexible joints
|
||||
\item This should allow to assemble and disassemble the struts many times if necessary
|
||||
\end{itemize}
|
||||
|
||||
\begin{figure}
|
||||
\begin{subfigure}{0.33\textwidth}
|
||||
@@ -141,46 +192,54 @@ The cylindrical component is located (or constrained) within the V-groove via tw
|
||||
\end{subfigure}
|
||||
\caption{\label{fig:detail_design_fixation_flexible_joints}Fixation of the flexible points to the nano-hexapod plates. Both top and bottom flexible joints are clamped to the plates as shown in (\subref{fig:detail_design_fixation_flexible_joints}). While the top flexible joint is in contact with the top plate for precise positioning of its center of rotation (\subref{fig:detail_design_location_top_flexible_joints}), the bottom joint is just oriented (\subref{fig:detail_design_location_bot_flex}).}
|
||||
\end{figure}
|
||||
\section{Finite Element Analysis}
|
||||
|
||||
|
||||
\begin{figure}[htbp]
|
||||
\centering
|
||||
\includegraphics[scale=1,width=0.9\linewidth]{figs/detail_design_enc_struts.jpg}
|
||||
\caption{\label{fig:detail_design_enc_struts}Obtained Nano-Hexapod design}
|
||||
\end{figure}
|
||||
\subsubsection{Finite Element Analysis}
|
||||
|
||||
Finite element analysis of the complete active platform was performed to identify problematic modes (Figure \ref{fig:detail_design_fem_nano_hexapod}):
|
||||
\begin{itemize}
|
||||
\item FEM of complete system
|
||||
\item Show modes of the struts
|
||||
\item First six modes were found to be ``suspension'' modes were the top plate moves as a rigid body, and the six struts are only moving axially (Figure \ref{fig:detail_design_fem_rigid_body_mode})
|
||||
\item Then, between \(205\,\text{Hz}\) and \(420\,\text{Hz}\) many ``local'' modes of the struts were observed.
|
||||
On is represented in Figure \ref{fig:detail_design_fem_strut_mode}.
|
||||
While these modes seem not to induce any motion of the top platform, it induces a relative displacement of the encoder with respect to the ruler.
|
||||
Therefore, when controlling the position of the active platform using the encoders, such modes could be problematic.
|
||||
Whether these modes are problematic is difficult to estimate at this point as:
|
||||
\begin{itemize}
|
||||
\item it is not known if the APA will ``excite'' these modes
|
||||
\item theoretically, if the struts are well aligned, these modes should not be observed
|
||||
\end{itemize}
|
||||
Then, flexible modes of the top plate are appearing above \(650\,\text{Hz}\) (Figure \ref{fig:detail_design_fem_plate_mode})
|
||||
\end{itemize}
|
||||
|
||||
\begin{figure}[htbp]
|
||||
\begin{subfigure}{0.33\textwidth}
|
||||
\begin{subfigure}{0.36\textwidth}
|
||||
\begin{center}
|
||||
\includegraphics[scale=1,width=0.9\linewidth]{figs/detail_design_fem_rigid_body_mode.jpg}
|
||||
\includegraphics[scale=1,width=0.95\linewidth]{figs/detail_design_fem_rigid_body_mode.jpg}
|
||||
\end{center}
|
||||
\subcaption{\label{fig:detail_design_fem_rigid_body_mode}Suspension modes}
|
||||
\subcaption{\label{fig:detail_design_fem_rigid_body_mode}Suspension mode}
|
||||
\end{subfigure}
|
||||
\begin{subfigure}{0.33\textwidth}
|
||||
\begin{subfigure}{0.36\textwidth}
|
||||
\begin{center}
|
||||
\includegraphics[scale=1,width=0.9\linewidth]{figs/detail_design_fem_strut_mode.jpg}
|
||||
\includegraphics[scale=1,width=0.95\linewidth]{figs/detail_design_fem_strut_mode.jpg}
|
||||
\end{center}
|
||||
\subcaption{\label{fig:detail_design_fem_strut_mode}Strut - Local modes}
|
||||
\subcaption{\label{fig:detail_design_fem_strut_mode}Strut - Local mode}
|
||||
\end{subfigure}
|
||||
\begin{subfigure}{0.33\textwidth}
|
||||
\begin{subfigure}{0.26\textwidth}
|
||||
\begin{center}
|
||||
\includegraphics[scale=1,width=0.9\linewidth]{figs/detail_design_fem_plate_mode.jpg}
|
||||
\includegraphics[scale=1,width=0.95\linewidth]{figs/detail_design_fem_plate_mode.jpg}
|
||||
\end{center}
|
||||
\subcaption{\label{fig:detail_design_fem_plate_mode}Top plate modes}
|
||||
\subcaption{\label{fig:detail_design_fem_plate_mode}Top plate mode}
|
||||
\end{subfigure}
|
||||
\caption{\label{fig:detail_design_fem_nano_hexapod}Measurement of strut flexible modes. First six modes are ``suspension'' modes in which the top plate behaves as a rigid body (\subref{fig:detail_design_fem_rigid_body_mode}). Then modes of the struts have natural frequencies from \(205\,\text{Hz}\) to \(420\,\text{Hz}\) (\subref{fig:detail_design_fem_strut_mode}). Finally, the first flexible mode of the top plate is at \(650\,\text{Hz}\) (\subref{fig:detail_design_fem_plate_mode})}
|
||||
\end{figure}
|
||||
\section{Obtained Design}
|
||||
\subsubsection{Alternative Encoder Placement}
|
||||
|
||||
To anticipate potential issue with local modes of the struts, an alternative fixation for the encoder is planned:
|
||||
\begin{itemize}
|
||||
\item Alternative encoder position: on the plates
|
||||
\item Support made of aluminum
|
||||
\item Instead of being fixed to the struts, the encoders are fixed to the plates instead, as shown in Figure \ref{fig:detail_design_enc_plates_design}.
|
||||
\item The support are made of aluminum, and it is verified that the natural modes are at high enough frequency (Figure \ref{fig:detail_design_enc_support_modes}).
|
||||
\item The positioning of the encoders are made using pockets in both plates as shown in Figure \ref{fig:detail_design_top_plate}.
|
||||
\item The encoders are aligned parallel to the struts, but yet they don't exactly measure the relative motion of each strut.
|
||||
\item This means that if relative motion of the active platform is performed based on the encoders, the accuracy of the motion may be affected.
|
||||
The issue is that the Kinematics may not be correct.
|
||||
\end{itemize}
|
||||
|
||||
\begin{figure}[htbp]
|
||||
@@ -199,30 +258,39 @@ The cylindrical component is located (or constrained) within the V-groove via tw
|
||||
\caption{\label{fig:detail_design_enc_plates_design}Alternative way of using the encoders: they are fixed directly to the plates.}
|
||||
\end{figure}
|
||||
|
||||
|
||||
\begin{figure}[htbp]
|
||||
\centering
|
||||
\includegraphics[scale=1]{figs/detail_design_fem_encoder_fix.png}
|
||||
\caption{\label{fig:detail_design_fem_encoder_fix}Finite Element Analysis of the encoder supports. Encoder inertia was taken into account.}
|
||||
\begin{subfigure}{0.33\textwidth}
|
||||
\begin{center}
|
||||
\includegraphics[scale=1,scale=0.5]{figs/detail_design_enc_support_mode_1.jpg}
|
||||
\end{center}
|
||||
\subcaption{\label{fig:detail_design_enc_support_mode_1}$1^{\text{st}}$ mode at $1120\,\text{Hz}$}
|
||||
\end{subfigure}
|
||||
\begin{subfigure}{0.33\textwidth}
|
||||
\begin{center}
|
||||
\includegraphics[scale=1,scale=0.5]{figs/detail_design_enc_support_mode_2.jpg}
|
||||
\end{center}
|
||||
\subcaption{\label{fig:detail_design_enc_support_mode_2}$2^{\text{nd}}$ mode at $2020\,\text{Hz}$}
|
||||
\end{subfigure}
|
||||
\begin{subfigure}{0.33\textwidth}
|
||||
\begin{center}
|
||||
\includegraphics[scale=1,scale=0.5]{figs/detail_design_enc_support_mode_3.jpg}
|
||||
\end{center}
|
||||
\subcaption{\label{fig:detail_design_enc_support_mode_3}$3^{\text{rd}}$ mode at $2080\,\text{Hz}$}
|
||||
\end{subfigure}
|
||||
\caption{\label{fig:detail_design_enc_support_modes}Finite Element Analysis of the encoder supports. Encoder inertia was taken into account.}
|
||||
\end{figure}
|
||||
\chapter{Multi-Body Model}
|
||||
\label{sec:detail_design_model}
|
||||
Before all the mechanical parts were ordered, the multi-body model of the active platform was refined using the design parts.
|
||||
|
||||
\textbf{Multi body Model}:
|
||||
\begin{itemize}
|
||||
\item Complete model: two plates, 6 joints, 6 actuators, 6 encoders
|
||||
\item Joint Model
|
||||
\item APA Model
|
||||
\item Encoder model
|
||||
\item Say that obtained dynamics was considered good + possible to perform simulations of tomography experiments with same performance as during the conceptual design
|
||||
\end{itemize}
|
||||
|
||||
Two configurations:
|
||||
Two configurations, displayed in Figure \ref{fig:detail_design_simscape_encoder}, were considered:
|
||||
\begin{itemize}
|
||||
\item Encoders fixed to the struts
|
||||
\item Encoders fixed to the plates
|
||||
\end{itemize}
|
||||
|
||||
Plates were modelled as rigid bodies, with inertia computed from the 3D shape.
|
||||
|
||||
\begin{figure}[htbp]
|
||||
\begin{subfigure}{0.49\textwidth}
|
||||
\begin{center}
|
||||
@@ -238,18 +306,49 @@ Two configurations:
|
||||
\end{subfigure}
|
||||
\caption{\label{fig:detail_design_simscape_encoder}3D representation of the multi-body model. There are two configurations: encoders fixed to the struts (\subref{fig:detail_design_simscape_encoder_struts}) and encoders fixed to the plates (\subref{fig:detail_design_simscape_encoder_plates}).}
|
||||
\end{figure}
|
||||
\section{Flexible Joints}
|
||||
\subsubsection{Flexible Joints}
|
||||
|
||||
Different models of the flexible joints where considered:
|
||||
\begin{itemize}
|
||||
\item 2DoF: only bending stiffnesses
|
||||
\item 3DoF: added torsional stiffness
|
||||
\item 4DoF: added axial stiffness
|
||||
\end{itemize}
|
||||
|
||||
The multi-body model for the 4DoF configuration is shown in Figure \ref{fig:detail_design_simscape_model_flexible_joint}.
|
||||
It is composed of three solid bodies connected by joints whose stiffnesses are computed from the finite element model.
|
||||
|
||||
\begin{figure}[htbp]
|
||||
\centering
|
||||
\includegraphics[scale=1,scale=1]{figs/detail_design_simscape_model_flexible_joint.png}
|
||||
\caption{\label{fig:detail_design_simscape_model_flexible_joint}Multi-Body (using the Simscape software) model of the flexible joints. A 4-DoFs model is shown.}
|
||||
\end{figure}
|
||||
\section{Amplified Piezoelectric Actuators}
|
||||
\subsubsection{Amplified Piezoelectric Actuators}
|
||||
|
||||
The amplified piezoelectric actuators are modelled as explained in Section [..].
|
||||
Two different models can be used in the multi-body model:
|
||||
\begin{itemize}
|
||||
\item a 2DoF ``axial'' model
|
||||
\item a ``super-element'' extracted from the finite element model
|
||||
\end{itemize}
|
||||
\subsubsection{Encoders}
|
||||
|
||||
Up to now, relative displacement sensors were implemented as a relative distance measurement between \(\bm{a}_i\) and \(\bm{b}_i\).
|
||||
|
||||
As shown in the previous section, flexible modes of the struts may negatively impact the encoder signal.
|
||||
It was therefore necessary to better model the encoder.
|
||||
|
||||
The optical encoder works:
|
||||
\begin{itemize}
|
||||
\item Encoder heads contains a light source shine on the ruler, and a photo-diode.
|
||||
This is represented by frame \(\{E\}\) in Figure \ref{fig:detail_design_simscape_encoder}.
|
||||
\item ruler or scale with a grating (here with a \(20\,\mu m\) pitch). A reference frame is indicated by \(\{R\}\)
|
||||
\end{itemize}
|
||||
|
||||
Therefore, the measured displacement is the relative position of \(\{E\}\) (i.e. there the light ``hits'' the scale) with respect to frame \(\{R\}\), in the direction of the scale.
|
||||
|
||||
|
||||
|
||||
\section{Encoders}
|
||||
In that case, a rotation of the encoder, as shown in figure \ref{fig:detail_design_simscape_encoder_disp} induces a measured displacement.
|
||||
|
||||
\begin{figure}[htbp]
|
||||
\begin{subfigure}{0.49\textwidth}
|
||||
@@ -266,6 +365,15 @@ Two configurations:
|
||||
\end{subfigure}
|
||||
\caption{\label{fig:detail_design_simscape_encoder_model}Representation of the encoder model in the multi-body model. Measurement \(d_i\) corresponds to the \(x\) position of the encoder frame \(\{E\}\) expresssed in the ruller frame \(\{R\}\) (\subref{fig:detail_design_simscape_encoder}). A rotation of the encoder therefore induces a measured displacement (\subref{fig:detail_design_simscape_encoder_disp}).}
|
||||
\end{figure}
|
||||
\subsubsection{Simulation}
|
||||
|
||||
Based on this refined model:
|
||||
\begin{itemize}
|
||||
\item the active platform could be integrated on top of the micro-station's model.
|
||||
\item the obtained dynamics was considered good
|
||||
\item simulations of tomography experiments were performed, and similar performance were obtained as during the conceptual design
|
||||
\item this is not presented here as results are very similar to the simulations performed in Section [\ldots{}]
|
||||
\end{itemize}
|
||||
\chapter{Conclusion}
|
||||
\label{sec:detail_design_conclusion}
|
||||
\printbibliography[heading=bibintoc,title={Bibliography}]
|
||||
|
||||