79 lines
3.6 KiB
Markdown
79 lines
3.6 KiB
Markdown
+++
|
||
title = "Force Sensors"
|
||
author = ["Thomas Dehaeze"]
|
||
draft = false
|
||
+++
|
||
|
||
Tags
|
||
: [Signal Conditioner]({{< relref "signal_conditioner" >}}), [Modal Analysis]({{< relref "modal_analysis" >}})
|
||
|
||
|
||
## Technologies {#technologies}
|
||
|
||
There are two main technique for force sensors:
|
||
|
||
- piezoelectric technology
|
||
- strain gauge technology
|
||
|
||
The choice between the two is usually based on whether the measurement is static (strain gauge) or dynamics (piezoelectric).
|
||
|
||
Main differences between the two are shown in Figure [1](#org140fe11).
|
||
|
||
<a id="org140fe11"></a>
|
||
|
||
{{< figure src="/ox-hugo/force_sensor_piezo_vs_strain_gauge.png" caption="Figure 1: Piezoelectric Force sensor VS Strain Gauge Force sensor" >}}
|
||
|
||
|
||
## Piezoelectric Force Sensors {#piezoelectric-force-sensors}
|
||
|
||
|
||
### Dynamics and Noise of a piezoelectric force sensor {#dynamics-and-noise-of-a-piezoelectric-force-sensor}
|
||
|
||
An analysis the dynamics and noise of a piezoelectric force sensor is done in ([Fleming 2010](#orgef1d5b9)) ([Notes]({{< relref "fleming10_nanop_system_with_force_feedb" >}})).
|
||
|
||
|
||
### Manufacturers {#manufacturers}
|
||
|
||
| Manufacturers | Links | Country |
|
||
|---------------|------------------------------------------------------------------------------------------------|---------|
|
||
| PCB | [link](https://www.pcb.com/products/productfinder.aspx?tx=17) | USA |
|
||
| HBM | [link](https://www.hbm.com/en/6107/force-sensors-with-flange-mounting/) | Germany |
|
||
| Kistler | [link](https://www.kistler.com/fr/produits/composants/capteurs-de-force/?pfv%5Fmetrics=metric) | Swiss |
|
||
| MMF | [link](https://www.mmf.de/force%5Ftransducers.htm) | Germany |
|
||
| Sinocera | [link](http://www.china-yec.net/sensors/) | China |
|
||
|
||
|
||
### Signal Conditioner {#signal-conditioner}
|
||
|
||
The voltage generated by the piezoelectric material generally needs to be amplified using a [Signal Conditioner]({{< relref "signal_conditioner" >}}).
|
||
|
||
Either **charge** amplifiers or **voltage** amplifiers can be used.
|
||
|
||
|
||
### Effect of using multiple Stacks in series of parallels {#effect-of-using-multiple-stacks-in-series-of-parallels}
|
||
|
||
If two stack are wired in series, the generated charge is kept constant and the capacitance is reduced by a factor 2.
|
||
Thus, the measured voltage is double while the measured charge is kept constant.
|
||
|
||
If two stacks are wired in parallel, the capacitance and the number of charge will be doubled.
|
||
Thus, if a voltage amplifier is used, no change of voltage will be experienced.
|
||
However, if a charge conditioner is used, the signal will be doubled.
|
||
|
||
|
||
## Load Cells {#load-cells}
|
||
|
||
|
||
### Manufacturers {#manufacturers}
|
||
|
||
| Manufacturers | Links | Country |
|
||
|---------------|-------------------------------------------------------------|----------------|
|
||
| Sensel | [link](https://www.sensel-measurement.fr/en/3-load-cell) | France |
|
||
| Omega | [link](https://www.omega.com/en-us/resources/load-cells) | United Kingdom |
|
||
| Megatron | [link](https://www.megatron.de/en/category/load-cells.html) | Germany |
|
||
| PCB | [link](https://www.pcb.com/products/product-finder?tx=19) | USA |
|
||
|
||
|
||
## Bibliography {#bibliography}
|
||
|
||
<a id="orgef1d5b9"></a>Fleming, A.J. 2010. “Nanopositioning System with Force Feedback for High-Performance Tracking and Vibration Control.” _IEEE/ASME Transactions on Mechatronics_ 15 (3):433–47. <https://doi.org/10.1109/tmech.2009.2028422>.
|