digital-brain/content/book/morrison16_groun_shiel.md

+++
title = "Grounding and shielding: circuits and interference"
author = ["Thomas Dehaeze"]
draft = false
+++

Tags
:


Reference
: ([Morrison 2016](#org32cff19))

Author(s)
: Morrison, R.

Year
: 2016


## Voltage and Capacitors {#voltage-and-capacitors}

<div class="sum">
  <div></div>

This first chapter described the electric field that is basic to all electrical activity.
The electric or \\(E\\) field represents forces between charges.
The basic charge is the electron.
When charges are placed on conductive surfaces, these forces move the charges to positions that store the least potential energy.
This energy is stored in an electric field.
The work required to move a unit of charge between two points in this field is the voltage between those two points.

Capacitors are conductor geometries used to store electric field energy.
The ability to store energy is enhanced by using dielectrics.
It is convenient to use two measures of the electric field.
The field that is created by charges is called the \\(D\\) field and the field that results in forces is the \\(E\\) field.
A changing \\(D\\) field represents a displacement current in space.
This changing current has an associated magnetic field.
This displacement current flows when charges are added or removed from the plates of a capacitor.

</div>


### Introduction {#introduction}

<a id="org3d4e25f"></a>

{{< figure src="/ox-hugo/morrison16_field_conf.png" caption="Figure 1: Field configurations around a shieded conductor" >}}


### Charges and Electrons {#charges-and-electrons}


### The electric force field {#the-electric-force-field}


### Field representation {#field-representation}


### The definition of voltage {#the-definition-of-voltage}


### Equipotential surfaces {#equipotential-surfaces}


### The force field or \\(E\\) field between two conducting plates {#the-force-field-or--e--field-between-two-conducting-plates}


### Electric field patterns {#electric-field-patterns}


### The energy stored in an electric field {#the-energy-stored-in-an-electric-field}


### Dielectrics {#dielectrics}


### The \\(D\\) field {#the--d--field}


### Capacitance {#capacitance}


### Mutual capacitance {#mutual-capacitance}


### Displacement current {#displacement-current}


### Energy stored in a capacitor {#energy-stored-in-a-capacitor}


### Forces in the electric field {#forces-in-the-electric-field}


### Capacitors {#capacitors}


### Dielectric absorption {#dielectric-absorption}


### Resistance of plane conductors {#resistance-of-plane-conductors}


## Magnetics {#magnetics}

<div class="sum">
  <div></div>

This chapter discusses magnetic fields.
As in the electric field, there are two measures of the same magnetic field.
The \\(H\\) field is the direct result of current flow.
The \\(B\\) field is the force of induction field that operates motors and transformers.
As in the electric field, the magnetic field is represented by field lines.
The \\(B\\) field lines are continuous and form closed curves.
The \\(H\\) field flux lines follow the \\(B\\) field lines but change intensity depending on the permeability of the material in the magnetic path.

In this chapter, the movement of electrical energy into inductors or across transformers is discussed.
This extends the ideas that both fields are need to move energy.
Both electric and magnetic fields are need in transformers action or to place energy into an inductor.
It will be shown that iron cores in transformers reduce the magnetizing current so that transformer action is practical at power frequencies.
The idea that a changing electric field creates both a displacement current and a magnetic field discussed in Chapter 1.
In this chapter, it is shown that a changing magnetic field produces both an electric field and voltages.
Both fields must be in transition before an electrical energy can be moved.

</div>


### Magnetic Fields {#magnetic-fields}

In a few elements, the atomic structure is such that atoms align to generate a net magnetic field (neodymium, iron, cobalt, ...).

The flow of electrons is another way to generate a magnetic field.

The letter \\(H\\) is reserved for the magnetic field generated by a current.

<a id="org2e6452b"></a>

{{< figure src="/ox-hugo/morrison16_H_field.svg" caption="Figure 2: The \\(H\\) field around a current-carrying conductor" >}}


### Ampere's law {#ampere-s-law}


### The solenoid {#the-solenoid}


### Faraday's law and the induction field {#faraday-s-law-and-the-induction-field}


### The definition of inductance {#the-definition-of-inductance}


### The energy stored in an inductance {#the-energy-stored-in-an-inductance}


### Magnetic field energy in space {#magnetic-field-energy-in-space}


### Electron drift {#electron-drift}


## Digital Electronics {#digital-electronics}

<div class="sum">
  <div></div>

This chapter shows that both electric and magnetic field are needed to move energy over pairs of conductors.
The idea of transporting electrical energy in field is extended to traces and conducting planes on printed circuit boards.
Logic signals are waves that carry field energy between points on the board.
These waves are reflected and transmitted when different transmission lines are interfaces.
There are several sources of first energy that play a role in circuit performance.
These sources are connected logic, the ground/power plane structure, and decoupling capacitors.
Decoupling capacitors are actually short stub transmission lines that supply energy.

The use of vias in the transmission paths is discussed in detail.
The fact that energy cannot pass through a conducting plane is stressed.
Limiting interference coupling in an A/D converter is a problem in keeping analog and logic fields separated.
Terminating balanced transmission lines is also discussed.

The concept of displacement current and its associated magnetic field is important.
These ideas show how field energy flows into a transmission line and is placed into capacitance at the leading edge of the wave.
Radiation occurs at the leading edge of a wave as it moves down the transmission line.

</div>


### Introduction {#introduction}


### The Transport of Electrical Energy {#the-transport-of-electrical-energy}


### Transmission Lines–Introduction {#transmission-lines-introduction}


### Transmission Line Operations {#transmission-line-operations}


### Transmission line field patterns {#transmission-line-field-patterns}


### A terminated transmission line {#a-terminated-transmission-line}


### The unterminated transmission line {#the-unterminated-transmission-line}


### A short circuit termination {#a-short-circuit-termination}


### The real world {#the-real-world}


### Sine waves versus step voltages {#sine-waves-versus-step-voltages}


### A bit of history {#a-bit-of-history}


### Ideal conditions {#ideal-conditions}


### Reflection and tramission coefficients {#reflection-and-tramission-coefficients}


### Taking energy from an ideal energy source {#taking-energy-from-an-ideal-energy-source}


### A capacitor as a transmission line {#a-capacitor-as-a-transmission-line}


### Decoupling capacitors and natural frequencies {#decoupling-capacitors-and-natural-frequencies}


### Printed circuit boards {#printed-circuit-boards}


### Two-layer logic boards {#two-layer-logic-boards}


### Vars {#vars}


### The termination of transmission lines {#the-termination-of-transmission-lines}


### Energy in the ground/power plane capacitance {#energy-in-the-ground-power-plane-capacitance}


### Poynting's vector {#poynting-s-vector}


### Skin effect {#skin-effect}


### Measurement problems: ground bounce {#measurement-problems-ground-bounce}


### Balance transmission {#balance-transmission}


### Ribbon cable and connectors {#ribbon-cable-and-connectors}


### Interfacing analog and digital circuits {#interfacing-analog-and-digital-circuits}


## Analog Circuits {#analog-circuits}

<div class="sum">
  <div></div>

This chapter treats the general problem of analog instrumentation.
The signals of interest are often generated while testing functioning hardware.
Tests can take place over time, in a harsh environment, during an explosion, during a flight, or in a collision.
The signals of interest usually have dc content and can be generating from floating, grounded, balanced or unbalanced transducers.
These transducers may require external balancing, calibration, or excitation.
Accuracy is an important consideration.
Where data must be sampled, the signals may require filtering to avoid aliasing errors.
The general two-ground system is examined.
Protecting signals using guard shields, transformer shields, and cable shields is described.
The use of feedback and tests for stability in circuit design is considered.
Strain-gauge configuration, thermocouple grounding, and charge amplifiers are discussed.

</div>


### Introduction {#introduction}


### Instrumentation {#instrumentation}


### History {#history}


### The basic shield enclosure {#the-basic-shield-enclosure}


### The enclosure and utility power {#the-enclosure-and-utility-power}


### The two-ground problem {#the-two-ground-problem}


### Instrumentation and the two-ground problem {#instrumentation-and-the-two-ground-problem}


### Strain-gauge instrumentation {#strain-gauge-instrumentation}


### The floating strain-gauge {#the-floating-strain-gauge}


### The thermocouple {#the-thermocouple}


### The basic low-gain differential amplifier (forward referencing amplifier) {#the-basic-low-gain-differential-amplifier--forward-referencing-amplifier}


### Shielding in power transformers {#shielding-in-power-transformers}


### Calibration and interference {#calibration-and-interference}


### The guard shield above 100kHz {#the-guard-shield-above-100khz}


### Signal flow paths in analog circuits {#signal-flow-paths-in-analog-circuits}


### Parallel active components {#parallel-active-components}


### Feedback stability - Introduction {#feedback-stability-introduction}


### Feedback theory {#feedback-theory}


### Output loads and circuit stability {#output-loads-and-circuit-stability}


### Feedback around a power stage {#feedback-around-a-power-stage}


### Constant current loops {#constant-current-loops}


### Filters and aliasing errors {#filters-and-aliasing-errors}


### Isolation and DC-to-DC converters {#isolation-and-dc-to-dc-converters}


### Charge converter basics {#charge-converter-basics}


### DC power supplies {#dc-power-supplies}


### Guard rings {#guard-rings}


### Thermocouple effects {#thermocouple-effects}


### Some thoughts on instrumentation {#some-thoughts-on-instrumentation}


## Utility Power and Facility Grounding {#utility-power-and-facility-grounding}

<div class="sum">
  <div></div>

This chapter discusses the relationship between utility power and the performance of electrical circuits.
Utility installations in facilities are controller by the NEC (National Electrical Code).
Safety and lighting protection requires that facilities connect their systems to earth.
Designers of electric hardware use utility power and also make electrical connections to earthed conductors.
This sharing of the earth connection creates many problems that are considered in this chapter.

Ground planes and isolation transformers can be used to limit interference.
The role of line filters, equipment grounds, and ground planes in facilities is explained.
The problems associated with using isolated ground conductors are discussed.
Lighting protection in facilities and for watercraft is a big safety issue.
The fact that current cannot enter the water below the water line is considered.
The battery action that causes the metal on boats to corrode is discussed.
The grounding methods in the Pacific Intertie are unique.
Solar winds can disrupt power distribution and damage oil pipelines.

</div>


### Introduction {#introduction}


### Semantics {#semantics}


### Utility power {#utility-power}


### The earth as a conductor {#the-earth-as-a-conductor}


### The neutral conneciton to earth {#the-neutral-conneciton-to-earth}


### Group potential differences {#group-potential-differences}


### Field coupling to power conductors {#field-coupling-to-power-conductors}


### Neutral conductors {#neutral-conductors}


### \\(k\\) factor in transformers {#k--factor-in-transformers}


### Power factor correction {#power-factor-correction}


### Ungrounded power {#ungrounded-power}


### A request for power {#a-request-for-power}


### Earth power currents {#earth-power-currents}


### Line filters {#line-filters}


### Isolated grounds {#isolated-grounds}


### Facility ground - Some history {#facility-ground-some-history}


### Ground planes in facilities {#ground-planes-in-facilities}


### Other ground planes {#other-ground-planes}


### Ground planes at remote sites {#ground-planes-at-remote-sites}


### Extending ground planes {#extending-ground-planes}


### Lightning {#lightning}


### Lightning and facilities {#lightning-and-facilities}


### Lightning protection for boats and ships {#lightning-protection-for-boats-and-ships}


### Grounding of boats and ships at dock {#grounding-of-boats-and-ships-at-dock}


### Aircraft grounding (fueling) {#aircraft-grounding--fueling}


### Ground Fault Interruption (GFI) {#ground-fault-interruption--gfi}


### Isolation transformers {#isolation-transformers}


## Radiation {#radiation}

<div class="sum">
  <div></div>

This chapter discusses radiation from circuit boards, transmission lines, conductor loops, and antennas.
The frequency spectrum of square waves and pulses is presented.
Matching of impedances is required to move energy from a transmission line to an antenna so that it can radiate this energy into free space.
Common-mode and normal-mode coupling of fields to conductors is considered.
The concept of wave impedance and its relation to shielding is considered.
Interference can be analyzed by using a rise-time frequency to represent pulses or step functions.

Effective radiated power from various transmitters is presented.
The field intensities for lightning and electrostatic discharge are given.
Loops generate low-impedance fields that are often difficult to shield.
Simple tools for locating sources of radiation are suggested.

</div>


### Handling radiation and susceptibility {#handling-radiation-and-susceptibility}


### Radiation {#radiation}


### Sine waves and transmission lines {#sine-waves-and-transmission-lines}


### Approximations for pulses and square waves {#approximations-for-pulses-and-square-waves}


### Radiation from components {#radiation-from-components}


### The dipole antenna {#the-dipole-antenna}


### Wave impedance {#wave-impedance}


### Field strength and antenna gain {#field-strength-and-antenna-gain}


### Radiation from loops {#radiation-from-loops}


### E-field coupling to a loop {#e-field-coupling-to-a-loop}


### Radiation from printed circuit boards {#radiation-from-printed-circuit-boards}


### The sniffer and the antenna {#the-sniffer-and-the-antenna}


### Microwave ovens {#microwave-ovens}


## Shielding from Radiation {#shielding-from-radiation}

<div class="sum">
  <div></div>

Cable shields are often made of aluminum foil or tinned copper braid.
Drain wires make it practical to connect to the foil.
Coaxial cables have a smooth inner surface that allows for the circulation of current and provide control of characteristic impedance.
Transfer impedance is a measure of shielding effectivity.
Multiple shields, low-noise cable, and conduit each have merits that are discussed.

The penetration of fields into enclosures is considered.
This includes independent and dependent apertures, the wave penetration of conducting surfaces, and waveguides.
The use of gaskets, honeycombs, and backshell connectors are described.
Handling utility power, line filters, and signal lines at a hardware interface are discussed.
Methods for limiting field penetration into and out of a screen are offered.

</div>


### Cables with shields {#cables-with-shields}


### Low-noise cables {#low-noise-cables}


### Transfer impedance {#transfer-impedance}


### Waveguides {#waveguides}


### Electromagnetic fields over a ground plane {#electromagnetic-fields-over-a-ground-plane}


### Fields and conductors {#fields-and-conductors}


### Conductive enclosures - Introduction {#conductive-enclosures-introduction}


### Coupling through enclosure walls by an induction fields {#coupling-through-enclosure-walls-by-an-induction-fields}


### Reflection and absorption of field energy at a conducting surface {#reflection-and-absorption-of-field-energy-at-a-conducting-surface}


### Independent apertures {#independent-apertures}


### Dependent apertures {#dependent-apertures}


### Honeycombs {#honeycombs}


### Summing field penetrations {#summing-field-penetrations}


### Power line filters {#power-line-filters}


### Backshell connectors {#backshell-connectors}


### H-field coupling {#h-field-coupling}


### Gaskets {#gaskets}


### Finger stock {#finger-stock}


### Glass apertures {#glass-apertures}


### Guarding large transistors {#guarding-large-transistors}


### Mounting components on surfaces {#mounting-components-on-surfaces}


### Zappers {#zappers}


### Shielded and screen rooms {#shielded-and-screen-rooms}


## Bibliography {#bibliography}

<a id="org32cff19"></a>Morrison, Ralph. 2016. _Grounding and Shielding: Circuits and Interference_. John Wiley & Sons.