44 lines
1.1 KiB
Matlab
44 lines
1.1 KiB
Matlab
%% Script Description
|
|
%
|
|
%%
|
|
clear; close all; clc;
|
|
|
|
%%
|
|
load('./mat/G_jacobian.mat');
|
|
|
|
%%
|
|
freqs = logspace(0, 3, 2000);
|
|
|
|
%%
|
|
bode_opts = bodeoptions;
|
|
bode_opts.FreqUnits = 'Hz';
|
|
bode_opts.MagUnits = 'abs';
|
|
bode_opts.MagScale = 'log';
|
|
bode_opts.PhaseVisible = 'off';
|
|
|
|
%% Compare when the Jac is above Meas. point and CoM
|
|
% =>
|
|
figure;
|
|
bode(G_center.G_cart, G_Jac_offset.G_cart, 2*pi*freqs, bode_opts);
|
|
|
|
%% Compare when the CoM is bellow the Meas. point and Jac
|
|
% => This make the tilt resonance frequency a little bit higher.
|
|
figure;
|
|
bode(G_center.G_cart, G_CoM_offset.G_cart, 2*pi*freqs, bode_opts);
|
|
|
|
%% Compare when the measurement point is higher than CoM and Jac
|
|
% =>
|
|
figure;
|
|
bode(G_center.G_cart, G_Meas_offset.G_cart, 2*pi*freqs, bode_opts);
|
|
|
|
%% Compare direct forces and forces applied by actuators on the same point
|
|
% => This should be the same is the support is rigid.
|
|
% => Looks like it's close but not equal
|
|
figure;
|
|
bode(G_center.G_cart, G_center.G_comp, 2*pi*freqs, bode_opts);
|
|
|
|
%% Compare relative sensor and absolute sensor
|
|
% => This should be the same as the support is rigid
|
|
figure;
|
|
bode(G_center.G_iner, G_center.G_comp, 2*pi*freqs, bode_opts);
|