UP | HOME

Simscape Model of the Nano-Active-Stabilization-System

Table of Contents

1 Simulink project

From the Simulink project mathworks page:

SimulinkĀ® and Simulink Projects provide a collaborative, scalable environment that enables teams to manage their files and data in one place.

With Simulink Projects, you can:

  • Collaborate: Enforce companywide standards such as company tools, libraries, and standard startup and shutdown scripts. Share your work with rich sharing options including MATLABĀ® toolboxes, email, and archives.
  • Automate: Set up your project environment correctly every time by automating steps such as loading the data, managing the path, and opening the models.
  • Integrate with source control: Enable easy integration with source control and configuration management tools.

The project can be opened using the simulinkproject function:

simulinkproject('./');

When the project opens, a startup script is ran. The startup script is defined below and is exported to the project_startup.m script.

freqs = logspace(-1, 3, 1000);
save_fig = false;
save('./mat/config.mat', 'freqs', 'save_fig');

project = simulinkproject;
projectRoot = project.RootFolder;

myCacheFolder = fullfile(projectRoot, '.SimulinkCache');
myCodeFolder = fullfile(projectRoot, '.SimulinkCode');

Simulink.fileGenControl('set',...
    'CacheFolder', myCacheFolder,...
    'CodeGenFolder', myCodeFolder,...
    'createDir', true);

When the project closes, it runs the project_shutdown.m script defined below.

Simulink.fileGenControl('reset');

The project also permits to automatically add defined folder to the path when the project is opened.

2 Simscape Model

A simscape model permits to model multi-physics systems.

Simscape Multibody permits to model multibody systems using blocks representing bodies, joints, constraints, force elements, and sensors.

2.1 Solid bodies

Each solid body is represented by a solid block. The geometry of the solid body can be imported using a step file. The properties of the solid body such as its mass, center of mass and moment of inertia can be derived from its density and its geometry as defined by the step file. They also can be set by hand.

2.2 Frames

Frames are very important in simscape multibody, they defined where the forces are applied, where the joints are located and where the measurements are made.

They can be defined from the solid body geometry, or using the rigid transform block.

2.3 Joints

Solid Bodies are connected with joints (between frames of the two solid bodies).

There are various types of joints that are all described here.

Table 1: Degrees of freedom associated with each joint
Joint Block Translational DOFs Rotational DOFs
6-DOF 3 3
Bearing 1 3
Bushing 3 3
Cartesian 3 0
Constant Velocity 0 2
Cylindrical 1 1
Gimbal 0 3
Leadscrew 1 (coupled) 1 (coupled)
Pin Slot 1 1
Planar 2 1
Prismatic 1 0
Rectangular 2 0
Revolute 0 1
Spherical 1 3
Telescoping 1 3
Universal 0 2
Weld 0 0

Joint blocks are assortments of joint primitives:

  • Prismatic: allows translation along a single standard axis: Px, Py, Pz
  • Revolute: allows rotation about a single standard axis: Rx, Ry, Rz
  • Spherical: allow rotation about any 3D axis: S
  • Lead Screw: allows coupled rotation and translation on a standard axis: LSz
  • Constant Velocity: Allows rotation at constant velocity between intersection through arbitrarily aligned shafts: CV
Table 2: Joint primitives for each joint type
Joint Block Px Py Pz Rx Ry Rz S CV LSz
6-DOF x x x       x    
Bearing     x x x x      
Bushing x x x x x x      
Cartesian x x x            
Constant Velocity               x  
Cylindrical     x     x      
Gimbal       x x x      
Leadscrew                 x
Pin Slot x         x      
Planar x x       x      
Prismatic     x            
Rectangular x x              
Revolute           x      
Spherical             x    
Telescoping     x       x    
Universal       x x        
Weld                  

For each of the joint primitive, we can specify the dynamical properties:

  • The spring stiffness: either linear or rotational one
  • The damping coefficient

For the actuation, we can either specify the motion or the force:

  • the force applied in the corresponding DOF is provided by the input
  • the motion is provided by the input

A sensor can be added to measure either the position, velocity or acceleration of the joint DOF.

Composite Force/Torque sensing:

  • Constraint force
  • Total force: gives the sum across all joint primitives over all sources: actuation inputs, internal springs and dampers.

2.4 Measurements

A transform sensor block measures the spatial relationship between two frames: the base B and the follower F.

It can give the rotational and translational position, velocity and acceleration.

The measurement frame should be specified: it corresponds to the frame in which to resolve the selected spatial measurements. The default is world.

If we want to simulate an inertial sensor, we just have to choose B to be the world frame.

Force sensors are included in the joints blocks.

2.5 Excitation

We can apply external forces to the model by using an external force and torque block.

Internal force, acting reciprocally between base and following origins is implemented using the internal force block even though it is usually included in one joint block.

3 Notes

3.1 Simscape files for identification

Simscape Name Ty Ry Rz Hexa NASS
id micro station F F F F  
id nano station stages F F F F F
id nano station config D D D D F
control nano station D D D D F

3.2 Inputs

3.2.1 Perturbations

Variable Meaning Size Unit
Dw Ground motion 3 [m]
Fg External force applied on granite 3 [N]
Fs External force applied on the Sample 3 [N]

3.2.2 Measurement Noise

Variable Meaning Size Unit
       

3.2.3 Control Inputs

Variable Meaning Size Unit
Fy Actuation force for Ty 1 [N]
Dy Imposed displacement for Ty 1 [m]
My Actuation torque for Ry 1 [N.m]
Ry Imposed rotation for Ry 1 [rad]
Mz Actuation torque for Rz 1 [N.m]
Rz Imposed rotation for Rz 1 [rad]
Fh Actuation force/torque for hexapod (cart) 6 [N, N.m]
Fhl Actuation force/torque for hexapod (legs) 6 [N]
Dh Imposed position for hexapod (cart) 6 [m, rad]
Rm Position of the two masses 2 [rad]
Fn Actuation force for the NASS (cart) 6 [N, N.m]
Fnl Actuation force for the NASS's legs 6 [N]
Dn Imposed position for the NASS (cart) 6 [m, rad]

3.3 Outputs

Variable Meaning Size Unit
Dgm Absolute displacement of the granite 3 [m]
Vgm Absolute Velocity of the granite 3 [m/s]
Dym Measured displacement of Ty 1 [m]
Rym Measured rotation of Ry 1 [rad]
Rzm Measured rotation of Rz 1 [rad]
Dhm Measured position of hexapod (cart) 6 [m, rad]
Fnlm Measured force of NASS's legs 6 [N]
Dnlm Measured elongation of NASS's legs 6 [m]
Dnm Measured position of NASS w.r.t NASS's base 6 [m, rad]
Vnm Measured absolute velocity of NASS platform 6 [m/s, rad/s]
Vnlm Measured absolute velocity of NASS's legs 6 [m/s]
Dsm Position of Sample w.r.t. granite frame 6 [m, rad]

4 Simulink files

Few different Simulink files are used:

  • kinematics
  • identification - micro station
  • identification - nano station
  • control

5 Simulink Library

A simulink library is developed in order to share elements between the different simulink files.

5.1 inputs

5.2 nasslibrary

5.3 poserrorwrtnassbase

5.4 QuaternionToAngles

5.5 RotationMatrixToAngle

6 Scripts

6.1 Simulation Initialization

This Matlab script is accessible here.

This script runs just before the simulation is started. It is used to load the simulation configuration and the controllers used for the simulation.

%% Load all the data used for the simulation
load('sim_conf.mat');

%% Load Controller
load('controllers.mat');

7 Functions

7.1 computePsdDispl

This Matlab function is accessible here.

function [psd_object] = computePsdDispl(sys_data, t_init, n_av)
    i_init = find(sys_data.time > t_init, 1);

    han_win = hanning(ceil(length(sys_data.Dx(i_init:end, :))/n_av));
    Fs = 1/sys_data.time(2);

    [pdx, f] = pwelch(sys_data.Dx(i_init:end, :), han_win, [], [], Fs);
    [pdy, ~] = pwelch(sys_data.Dy(i_init:end, :), han_win, [], [], Fs);
    [pdz, ~] = pwelch(sys_data.Dz(i_init:end, :), han_win, [], [], Fs);

    [prx, ~] = pwelch(sys_data.Rx(i_init:end, :), han_win, [], [], Fs);
    [pry, ~] = pwelch(sys_data.Ry(i_init:end, :), han_win, [], [], Fs);
    [prz, ~] = pwelch(sys_data.Rz(i_init:end, :), han_win, [], [], Fs);

    psd_object = struct(...
        'f',  f,   ...
        'dx', pdx, ...
        'dy', pdy, ...
        'dz', pdz, ...
        'rx', prx, ...
        'ry', pry, ...
        'rz', prz);
end

7.2 computeSetpoint

This Matlab function is accessible here.

function setpoint = computeSetpoint(ty, ry, rz)
%%
setpoint = zeros(6, 1);

%% Ty
Ty = [1 0 0 0  ;
      0 1 0 ty ;
      0 0 1 0  ;
      0 0 0 1 ];

% Tyinv = [1 0 0  0  ;
%          0 1 0 -ty ;
%          0 0 1  0  ;
%          0 0 0  1 ];

%% Ry
Ry = [ cos(ry) 0 sin(ry) 0 ;
      0       1 0       0 ;
      -sin(ry) 0 cos(ry) 0 ;
      0        0 0       1 ];

% TMry = Ty*Ry*Tyinv;

%% Rz
Rz = [cos(rz) -sin(rz) 0 0 ;
      sin(rz)  cos(rz) 0 0 ;
      0        0       1 0 ;
      0        0       0 1 ];

% TMrz = Ty*TMry*Rz*TMry'*Tyinv;

%% All stages
% TM = TMrz*TMry*Ty;

TM = Ty*Ry*Rz;

[thetax, thetay, thetaz] = RM2angle(TM(1:3, 1:3));

setpoint(1:3) = TM(1:3, 4);
setpoint(4:6) = [thetax, thetay, thetaz];

%% Custom Functions
function [thetax, thetay, thetaz] = RM2angle(R)
    if abs(abs(R(3, 1)) - 1) > 1e-6 % R31 != 1 and R31 != -1
        thetay = -asin(R(3, 1));
        thetax = atan2(R(3, 2)/cos(thetay), R(3, 3)/cos(thetay));
        thetaz = atan2(R(2, 1)/cos(thetay), R(1, 1)/cos(thetay));
    else
        thetaz = 0;
        if abs(R(3, 1)+1) < 1e-6 % R31 = -1
            thetay = pi/2;
            thetax = thetaz + atan2(R(1, 2), R(1, 3));
        else
            thetay = -pi/2;
            thetax = -thetaz + atan2(-R(1, 2), -R(1, 3));
        end
    end
end
end

7.3 converErrorBasis

This Matlab function is accessible here.

function error_nass = convertErrorBasis(pos, setpoint, ty, ry, rz)
% convertErrorBasis -
%
% Syntax: convertErrorBasis(p_error, ty, ry, rz)
%
% Inputs:
%    - p_error - Position error of the sample w.r.t. the granite [m, rad]
%    - ty - Measured translation of the Ty stage [m]
%    - ry - Measured rotation of the Ry stage [rad]
%    - rz - Measured rotation of the Rz stage [rad]
%
% Outputs:
%    - P_nass - Position error of the sample w.r.t. the NASS base [m]
%    - R_nass - Rotation error of the sample w.r.t. the NASS base [rad]
%
% Example:
%

%% If line vector => column vector
if size(pos, 2) == 6
    pos = pos';
end

if size(setpoint, 2) == 6
    setpoint = setpoint';
end

%% Position of the sample in the frame fixed to the Granite
P_granite = [pos(1:3); 1]; % Position [m]
R_granite = [setpoint(1:3); 1]; % Reference [m]

%% Transformation matrices of the stages
% T-y
TMty = [1 0 0 0  ;
        0 1 0 ty ;
        0 0 1 0  ;
        0 0 0 1 ];

% R-y
TMry = [ cos(ry) 0 sin(ry) 0 ;
        0       1 0       0 ;
        -sin(ry) 0 cos(ry) 0 ;
        0        0 0       1 ];

% R-z
TMrz = [cos(rz) -sin(rz) 0 0 ;
        sin(rz)  cos(rz) 0 0 ;
        0        0       1 0 ;
        0        0       0 1 ];

%% Compute Point coordinates in the new reference fixed to the NASS base
% P_nass = TMrz*TMry*TMty*P_granite;
P_nass = TMrz\TMry\TMty\P_granite;
R_nass = TMrz\TMry\TMty\R_granite;

dx = R_nass(1)-P_nass(1);
dy = R_nass(2)-P_nass(2);
dz = R_nass(3)-P_nass(3);

%% Compute new basis vectors linked to the NASS base
% ux_nass = TMrz*TMry*TMty*[1; 0; 0; 0];
% ux_nass = ux_nass(1:3);
% uy_nass = TMrz*TMry*TMty*[0; 1; 0; 0];
% uy_nass = uy_nass(1:3);
% uz_nass = TMrz*TMry*TMty*[0; 0; 1; 0];
% uz_nass = uz_nass(1:3);

ux_nass = TMrz\TMry\TMty\[1; 0; 0; 0];
ux_nass = ux_nass(1:3);
uy_nass = TMrz\TMry\TMty\[0; 1; 0; 0];
uy_nass = uy_nass(1:3);
uz_nass = TMrz\TMry\TMty\[0; 0; 1; 0];
uz_nass = uz_nass(1:3);

%% Rotations error w.r.t. granite Frame
% Rotations error w.r.t. granite Frame
rx_nass = pos(4);
ry_nass = pos(5);
rz_nass = pos(6);

% Rotation matrices of the Sample w.r.t. the Granite
Mrx_error = [1 0              0 ;
            0 cos(-rx_nass) -sin(-rx_nass) ;
            0 sin(-rx_nass)  cos(-rx_nass)];

Mry_error = [ cos(-ry_nass) 0 sin(-ry_nass) ;
              0             1 0 ;
            -sin(-ry_nass) 0 cos(-ry_nass)];

Mrz_error = [cos(-rz_nass) -sin(-rz_nass) 0 ;
            sin(-rz_nass)  cos(-rz_nass) 0 ;
            0              0             1];

% Rotation matrix of the Sample w.r.t. the Granite
Mr_error = Mrz_error*Mry_error*Mrx_error;

%% Use matrix to solve
R = Mr_error/[ux_nass, uy_nass, uz_nass]; % Rotation matrix from NASS base to Sample

[thetax, thetay, thetaz] = RM2angle(R);

error_nass = [dx; dy; dz; thetax; thetay; thetaz];

%% Custom Functions
function [thetax, thetay, thetaz] = RM2angle(R)
    if abs(abs(R(3, 1)) - 1) > 1e-6 % R31 != 1 and R31 != -1
        thetay = -asin(R(3, 1));
        % thetaybis = pi-thetay;
        thetax = atan2(R(3, 2)/cos(thetay), R(3, 3)/cos(thetay));
        % thetaxbis = atan2(R(3, 2)/cos(thetaybis), R(3, 3)/cos(thetaybis));
        thetaz = atan2(R(2, 1)/cos(thetay), R(1, 1)/cos(thetay));
        % thetazbis = atan2(R(2, 1)/cos(thetaybis), R(1, 1)/cos(thetaybis));
    else
        thetaz = 0;
        if abs(R(3, 1)+1) < 1e-6 % R31 = -1
            thetay = pi/2;
            thetax = thetaz + atan2(R(1, 2), R(1, 3));
        else
            thetay = -pi/2;
            thetax = -thetaz + atan2(-R(1, 2), -R(1, 3));
        end
    end
end

end

7.4 generateDiagPidControl

This Matlab function is accessible here.

function [K] = generateDiagPidControl(G, fs)
    %%
    pid_opts = pidtuneOptions(...
        'PhaseMargin', 50, ...
        'DesignFocus', 'disturbance-rejection');

    %%
    K = tf(zeros(6));

    for i = 1:6
        input_name = G.InputName(i);
        output_name = G.OutputName(i);
        K(i, i) = tf(pidtune(minreal(G(output_name, input_name)), 'PIDF', 2*pi*fs, pid_opts));
    end

    K.InputName = G.OutputName;
    K.OutputName = G.InputName;
end

7.5 identifyPlant

This Matlab function is accessible here.

function [sys] = identifyPlant(opts_param)
    %% Default values for opts
    opts = struct();

    %% Populate opts with input parameters
    if exist('opts_param','var')
        for opt = fieldnames(opts_param)'
            opts.(opt{1}) = opts_param.(opt{1});
        end
    end

    %% Options for Linearized
    options = linearizeOptions;
    options.SampleTime = 0;

    %% Name of the Simulink File
    mdl = 'sim_nano_station_id';

    %% Input/Output definition
    io(1) = linio([mdl, '/Fn'],   1, 'input'); % Cartesian forces applied by NASS
    io(2) = linio([mdl, '/Dw'],   1, 'input'); % Ground Motion
    io(3) = linio([mdl, '/Fs'],   1, 'input'); % External forces on the sample
    io(4) = linio([mdl, '/Fnl'],  1, 'input'); % Forces applied on the NASS's legs
    io(5) = linio([mdl, '/Dsm'],  1, 'output'); % Displacement of the sample
    io(6) = linio([mdl, '/Fnlm'], 1, 'output'); % Force sensor in NASS's legs
    io(7) = linio([mdl, '/Dnlm'], 1, 'output'); % Displacement of NASS's legs
    io(8) = linio([mdl, '/Es'],   1, 'output'); % Position Error w.r.t. NASS base

    %% Run the linearization
    G = linearize(mdl, io, 0);
    G.InputName  = {'Fnx', 'Fny', 'Fnz', 'Mnx', 'Mny', 'Mnz', ...
                    'Dgx', 'Dgy', 'Dgz', ...
                    'Fsx', 'Fsy', 'Fsz', 'Msx', 'Msy', 'Msz', ...
                    'F1', 'F2', 'F3', 'F4', 'F5', 'F6'};
    G.OutputName = {'Dx', 'Dy', 'Dz', 'Rx', 'Ry', 'Rz', ...
                    'Fm1', 'Fm2', 'Fm3', 'Fm4', 'Fm5', 'Fm6', ...
                    'Dm1', 'Dm2', 'Dm3', 'Dm4', 'Dm5', 'Dm6', ...
                    'Edx', 'Rdy', 'Edz', 'Erx', 'Ery', 'Erz'};

    %% Create the sub transfer functions
    % From forces applied in the cartesian frame to displacement of the sample in the cartesian frame
    sys.G_cart = minreal(G({'Dx', 'Dy', 'Dz', 'Rx', 'Ry', 'Rz'}, {'Fnx', 'Fny', 'Fnz', 'Mnx', 'Mny', 'Mnz'}));
    % From ground motion to Sample displacement
    sys.G_gm   = minreal(G({'Dx', 'Dy', 'Dz', 'Rx', 'Ry', 'Rz'}, {'Dgx', 'Dgy', 'Dgz'}));
    % From direct forces applied on the sample to displacement of the sample
    sys.G_fs   = minreal(G({'Dx', 'Dy', 'Dz', 'Rx', 'Ry', 'Rz'}, {'Fsx', 'Fsy', 'Fsz', 'Msx', 'Msy', 'Msz'}));
    % From forces applied on NASS's legs to force sensor in each leg
    sys.G_iff  = minreal(G({'Fm1', 'Fm2', 'Fm3', 'Fm4', 'Fm5', 'Fm6'}, {'F1', 'F2', 'F3', 'F4', 'F5', 'F6'}));
    % From forces applied on NASS's legs to displacement of each leg
    sys.G_dleg = minreal(G({'Dm1', 'Dm2', 'Dm3', 'Dm4', 'Dm5', 'Dm6'}, {'F1', 'F2', 'F3', 'F4', 'F5', 'F6'}));
    % From forces applied on NASS's legs to displacement of each leg
    sys.G_plant = minreal(G({'Edx', 'Rdy', 'Edz', 'Erx', 'Ery', 'Erz'}, {'Fnx', 'Fny', 'Fnz', 'Mnx', 'Mny', 'Mnz'}));
end

7.6 runSimulation

This Matlab function is accessible here.

function [] = runSimulation(sys_name, sys_mass, ctrl_type, act_damp)
    %% Load the controller and save it for the simulation
    if strcmp(ctrl_type, 'cl') && strcmp(act_damp, 'none')
      K_obj = load('./mat/K_fb.mat');
      K = K_obj.(sprintf('K_%s_%s', sys_mass, sys_name)); %#ok
      save('./mat/controllers.mat', 'K');
    elseif strcmp(ctrl_type, 'cl') && strcmp(act_damp, 'iff')
      K_obj = load('./mat/K_fb_iff.mat');
      K = K_obj.(sprintf('K_%s_%s_iff', sys_mass, sys_name)); %#ok
      save('./mat/controllers.mat', 'K');
    elseif strcmp(ctrl_type, 'ol')
      K = tf(zeros(6)); %#ok
      save('./mat/controllers.mat', 'K');
    else
      error('ctrl_type should be cl or ol');
    end

    %% Active Damping
    if strcmp(act_damp, 'iff')
      K_iff_crit = load('./mat/K_iff_crit.mat');
      K_iff = K_iff_crit.(sprintf('K_iff_%s_%s', sys_mass, sys_name)); %#ok
      save('./mat/controllers.mat', 'K_iff', '-append');
    elseif strcmp(act_damp, 'none')
      K_iff = tf(zeros(6)); %#ok
      save('./mat/controllers.mat', 'K_iff', '-append');
    end

    %%
    if strcmp(sys_name, 'pz')
      initializeNanoHexapod(struct('actuator', 'piezo'));
    elseif strcmp(sys_name, 'vc')
      initializeNanoHexapod(struct('actuator', 'lorentz'));
    else
      error('sys_name should be pz or vc');
    end

    if strcmp(sys_mass, 'light')
      initializeSample(struct('mass', 1));
    elseif strcmp(sys_mass, 'heavy')
      initializeSample(struct('mass', 50));
    else
      error('sys_mass should be light or heavy');
    end

    %% Run the simulation
    sim('sim_nano_station_ctrl.slx');

    %% Split the Dsample matrix into vectors
    [Dx, Dy, Dz, Rx, Ry, Rz] = matSplit(Es.Data, 1); %#ok
    time = Dsample.Time; %#ok

    %% Save the result
    filename = sprintf('sim_%s_%s_%s_%s', sys_mass, sys_name, ctrl_type, act_damp);
    save(sprintf('./mat/%s.mat', filename), ...
        'time', 'Dx', 'Dy', 'Dz', 'Rx', 'Ry', 'Rz', 'K');
end

8 Initialize Elements

8.1 Simulation Configuration

This Matlab function is accessible here.

function [] = initializeSimConf(opts_param)
    %% Default values for opts
    opts = struct('Ts',      1e-4,  ... % Sampling time [s]
                  'Tsim',    10,    ... % Simulation time [s]
                  'cl_time', 0,     ... % Close Loop time [s]
                  'gravity', false  ... % Gravity along the z axis
    );

    %% Populate opts with input parameters
    if exist('opts_param','var')
        for opt = fieldnames(opts_param)'
            opts.(opt{1}) = opts_param.(opt{1});
        end
    end

    %%
    sim_conf = struct();

    %%
    sim_conf.Ts = opts.Ts;
    sim_conf.Tsim = opts.Tsim;
    sim_conf.cl_time = opts.cl_time;

    %% Gravity
    if opts.gravity
        sim_conf.g = -9.8; %#ok
    else
        sim_conf.g = 0; %#ok
    end

    %% Save
    save('./mat/sim_conf.mat', 'sim_conf');
end

8.2 Experiment

This Matlab function is accessible here.

function [] = initializeExperiment(exp_name, sys_mass)
    if strcmp(exp_name, 'tomography')
        opts_sim = struct(...
            'Tsim',    5, ...
            'cl_time', 5  ...
        );
        initializeSimConf(opts_sim);

        if strcmp(sys_mass, 'light')
            opts_inputs = struct(...
                'Dw', true,  ...
                'Rz', 60     ... % rpm
            );
        elseif strcpm(sys_mass, 'heavy')
            opts_inputs = struct(...
                'Dw', true,  ...
                'Rz', 1     ... % rpm
            );
        else
            error('sys_mass should be light or heavy');
        end

        initializeInputs(opts_inputs);
    else
        error('exp_name is only configured for tomography');
    end
end

8.3 Inputs

This Matlab function is accessible here.

function [inputs] = initializeInputs(opts_param)
    %% Default values for opts
    opts = struct(   ...
        'Dw', false, ...
        'Dy', false, ...
        'Ry', false, ...
        'Rz', false, ...
        'Dh', false, ...
        'Rm', false, ...
        'Dn', false  ...
    );

    %% Populate opts with input parameters
    if exist('opts_param','var')
        for opt = fieldnames(opts_param)'
            opts.(opt{1}) = opts_param.(opt{1});
        end
    end

    %% Load Sampling Time and Simulation Time
    load('./mat/sim_conf.mat', 'sim_conf');

    %% Define the time vector
    t = 0:sim_conf.Ts:sim_conf.Tsim;

    %% Ground motion - Dw
    if islogical(opts.Dw) && opts.Dw == true
        load('./mat/perturbations.mat', 'Wxg');
        Dw = 1/sqrt(2)*100*random('norm', 0, 1, length(t), 3);
        Dw(:, 1) = lsim(Wxg, Dw(:, 1), t);
        Dw(:, 2) = lsim(Wxg, Dw(:, 2), t);
        Dw(:, 3) = lsim(Wxg, Dw(:, 3), t);
    elseif islogical(opts.Dw) && opts.Dw == false
        Dw = zeros(length(t), 3);
    else
        Dw = opts.Dw;
    end

    %% Translation stage - Dy
    if islogical(opts.Dy) && opts.Dy == true
        Dy = zeros(length(t), 1);
    elseif islogical(opts.Dy) && opts.Dy == false
        Dy = zeros(length(t), 1);
    else
        Dy = opts.Dy;
    end

    %% Tilt Stage - Ry
    if islogical(opts.Ry) && opts.Ry == true
        Ry = 3*(2*pi/360)*sin(2*pi*0.2*t);
    elseif islogical(opts.Ry) && opts.Ry == false
        Ry = zeros(length(t), 1);
    elseif isnumeric(opts.Ry) && length(opts.Ry) == 1
        Ry = opts.Ry*(2*pi/360)*ones(length(t), 1);
    else
        Ry = opts.Ry;
    end

    %% Spindle - Rz
    if islogical(opts.Rz) && opts.Rz == true
        Rz = 2*pi*0.5*t;
    elseif islogical(opts.Rz) && opts.Rz == false
        Rz = zeros(length(t), 1);
    elseif isnumeric(opts.Rz) && length(opts.Rz) == 1
        Rz = opts.Rz*(2*pi/60)*t;
    else
        Rz = opts.Rz;
    end

    %% Micro Hexapod - Dh
    if islogical(opts.Dh) && opts.Dh == true
        Dh = zeros(length(t), 6);
    elseif islogical(opts.Dh) && opts.Dh == false
        Dh = zeros(length(t), 6);
    else
        Dh = opts.Dh;
    end

    %% Axis Compensation - Rm
    if islogical(opts.Rm)
        Rm = zeros(length(t), 2);
        Rm(:, 2) = pi*ones(length(t), 1);
    else
        Rm = opts.Rm;
    end

    %% Nano Hexapod - Dn
    if islogical(opts.Dn) && opts.Dn == true
        Dn = zeros(length(t), 6);
    elseif islogical(opts.Dn) && opts.Dn == false
        Dn = zeros(length(t), 6);
    else
        Dn = opts.Dn;
    end

    %% Setpoint - Ds
    Ds = zeros(length(t), 6);
    for i = 1:length(t)
        Ds(i, :) = computeSetpoint(Dy(i), Ry(i), Rz(i));
    end

    %% External Forces applied on the Granite
    Fg = zeros(length(t), 3);

    %% External Forces applied on the Sample
    Fs = zeros(length(t), 6);

    %% Create the input Structure that will contain all the inputs
    inputs = struct( ...
        'Ts', sim_conf.Ts,       ...
        'Dw', timeseries(Dw, t), ...
        'Dy', timeseries(Dy, t), ...
        'Ry', timeseries(Ry, t), ...
        'Rz', timeseries(Rz, t), ...
        'Dh', timeseries(Dh, t), ...
        'Rm', timeseries(Rm, t), ...
        'Dn', timeseries(Dn, t), ...
        'Ds', timeseries(Ds, t), ...
        'Fg', timeseries(Fg, t), ...
        'Fs', timeseries(Fs, t)  ...
    );

    %% Save
    save('./mat/inputs.mat', 'inputs');

    %% Custom Functions
    function setpoint = computeSetpoint(ty, ry, rz)
    %%
    setpoint = zeros(6, 1);

    %% Ty
    TMTy = [1 0 0 0  ;
          0 1 0 ty ;
          0 0 1 0  ;
          0 0 0 1 ];

    %% Ry
    TMRy = [ cos(ry) 0 sin(ry) 0 ;
          0       1 0       0 ;
          -sin(ry) 0 cos(ry) 0 ;
          0        0 0       1 ];

    %% Rz
    TMRz = [cos(rz) -sin(rz) 0 0 ;
          sin(rz)  cos(rz) 0 0 ;
          0        0       1 0 ;
          0        0       0 1 ];

    %% All stages
    TM = TMTy*TMRy*TMRz;

    [thetax, thetay, thetaz] = RM2angle(TM(1:3, 1:3));

    setpoint(1:3) = TM(1:3, 4);
    setpoint(4:6) = [thetax, thetay, thetaz];

    %% Custom Functions
    function [thetax, thetay, thetaz] = RM2angle(R)
        if abs(abs(R(3, 1)) - 1) > 1e-6 % R31 != 1 and R31 != -1
            thetay = -asin(R(3, 1));
            thetax = atan2(R(3, 2)/cos(thetay), R(3, 3)/cos(thetay));
            thetaz = atan2(R(2, 1)/cos(thetay), R(1, 1)/cos(thetay));
        else
            thetaz = 0;
            if abs(R(3, 1)+1) < 1e-6 % R31 = -1
                thetay = pi/2;
                thetax = thetaz + atan2(R(1, 2), R(1, 3));
            else
                thetay = -pi/2;
                thetax = -thetaz + atan2(-R(1, 2), -R(1, 3));
            end
        end
    end
    end
end

8.4 Ground

This Matlab function is accessible here.

function [ground] = initializeGround()
    %%
    ground = struct();

    ground.shape = [2, 2, 0.5]; % [m]
    ground.density = 2800; % [kg/m3]
    ground.color = [0.5, 0.5, 0.5];

    %% Save
    save('./mat/stages.mat', 'ground', '-append');
end

8.5 Granite

This Matlab function is accessible here.

function [granite] = initializeGranite()
    %%
    granite = struct();

    %% Static Properties
    granite.density = 2800; % [kg/m3]
    granite.volume  = 0.72; % [m3] TODO - should
    granite.mass    = granite.density*granite.volume; % [kg]
    granite.color   = [1 1 1];
    granite.STEP    = './STEPS/granite/granite.STEP';

    %% Dynamical Properties
    granite.k.x = 1e8; % [N/m]
    granite.c.x = 1e4; % [N/(m/s)]

    granite.k.y = 1e8; % [N/m]
    granite.c.y = 1e4; % [N/(m/s)]

    granite.k.z = 1e8; % [N/m]
    granite.c.z = 1e4; % [N/(m/s)]

    %% Positioning parameters
    granite.sample_pos = 0.8; % Z-offset for the initial position of the sample [m]

    %% Save
    save('./mat/stages.mat', 'granite', '-append');
end

8.6 Translation Stage

This Matlab function is accessible here.

function [ty] = initializeTy(opts_param)
    %% Default values for opts
    opts = struct('rigid', false);

    %% Populate opts with input parameters
    if exist('opts_param','var')
        for opt = fieldnames(opts_param)'
            opts.(opt{1}) = opts_param.(opt{1});
        end
    end

    %%
    ty = struct();

    %% Y-Translation - Static Properties
    % Ty Granite frame
    ty.granite_frame.density = 7800; % [kg/m3]
    ty.granite_frame.color   = [0.753 1 0.753];
    ty.granite_frame.STEP    = './STEPS/Ty/Ty_Granite_Frame.STEP';
    % Guide Translation Ty
    ty.guide.density         = 7800; % [kg/m3]
    ty.guide.color           = [0.792 0.820 0.933];
    ty.guide.STEP            = './STEPS/ty/Ty_Guide.STEP';
    % Ty - Guide_Translation12
    ty.guide12.density       = 7800; % [kg/m3]
    ty.guide12.color         = [0.792 0.820 0.933];
    ty.guide12.STEP          = './STEPS/Ty/Ty_Guide_12.STEP';
    % Ty - Guide_Translation11
    ty.guide11.density       = 7800; % [kg/m3]
    ty.guide11.color         = [0.792 0.820 0.933];
    ty.guide11.STEP          = './STEPS/ty/Ty_Guide_11.STEP';
    % Ty - Guide_Translation22
    ty.guide22.density       = 7800; % [kg/m3]
    ty.guide22.color         = [0.792 0.820 0.933];
    ty.guide22.STEP          = './STEPS/ty/Ty_Guide_22.STEP';
    % Ty - Guide_Translation21
    ty.guide21.density       = 7800; % [kg/m3]
    ty.guide21.color         = [0.792 0.820 0.933];
    ty.guide21.STEP          = './STEPS/Ty/Ty_Guide_21.STEP';
    % Ty - Plateau translation
    ty.frame.density         = 7800; % [kg/m3]
    ty.frame.color           = [0.792 0.820 0.933];
    ty.frame.STEP            = './STEPS/ty/Ty_Stage.STEP';
    % Ty Stator Part
    ty.stator.density        = 5400; % [kg/m3]
    ty.stator.color          = [0.792 0.820 0.933];
    ty.stator.STEP           = './STEPS/ty/Ty_Motor_Stator.STEP';
    % Ty Rotor Part
    ty.rotor.density         = 5400; % [kg/m3]
    ty.rotor.color           = [0.792 0.820 0.933];
    ty.rotor.STEP            = './STEPS/ty/Ty_Motor_Rotor.STEP';

    ty.m = 250; % TODO [kg]

    %% Y-Translation - Dynamicals Properties
    if opts.rigid
        ty.k.ax  = 1e10; % Axial Stiffness for each of the 4 guidance (y) [N/m]
    else
        ty.k.ax  = 1e7/4; % Axial Stiffness for each of the 4 guidance (y) [N/m]
    end
    ty.k.rad = 9e9/4; % Radial Stiffness for each of the 4 guidance (x-z) [N/m]

    ty.c.ax  = 100*(1/5)*sqrt(ty.k.ax/ty.m);
    ty.c.rad = 100*(1/5)*sqrt(ty.k.rad/ty.m);

    %% Save
    save('./mat/stages.mat', 'ty', '-append');
end

8.7 Tilt Stage

This Matlab function is accessible here.

function [ry] = initializeRy(opts_param)
    %% Default values for opts
    opts = struct('rigid', false);

    %% Populate opts with input parameters
    if exist('opts_param','var')
        for opt = fieldnames(opts_param)'
            opts.(opt{1}) = opts_param.(opt{1});
        end
    end

    %%
    ry = struct();

    %% Tilt Stage - Static Properties
    % Ry - Guide for the tilt stage
    ry.guide.density = 7800; % [kg/m3]
    ry.guide.color   = [0.792 0.820 0.933];
    ry.guide.STEP    = './STEPS/ry/Tilt_Guide.STEP';
    % Ry - Rotor of the motor
    ry.rotor.density = 2400; % [kg/m3]
    ry.rotor.color   = [0.792 0.820 0.933];
    ry.rotor.STEP    = './STEPS/ry/Tilt_Motor_Axis.STEP';
    % Ry - Motor
    ry.motor.density = 3200; % [kg/m3]
    ry.motor.color   = [0.792 0.820 0.933];
    ry.motor.STEP    = './STEPS/ry/Tilt_Motor.STEP';
    % Ry - Plateau Tilt
    ry.stage.density = 7800; % [kg/m3]
    ry.stage.color   = [0.792 0.820 0.933];
    ry.stage.STEP    = './STEPS/ry/Tilt_Stage.STEP';

    ry.m = 200; % TODO [kg]

    %% Tilt Stage - Dynamical Properties
    if opts.rigid
        ry.k.tilt = 1e10; % Rotation stiffness around y [N*m/deg]
    else
        ry.k.tilt = 1e4; % Rotation stiffness around y [N*m/deg]
    end

    ry.k.h    = 357e6/4; % Stiffness in the direction of the guidance [N/m]
    ry.k.rad  = 555e6/4; % Stiffness in the top direction [N/m]
    ry.k.rrad = 238e6/4; % Stiffness in the side direction [N/m]

    ry.c.h    = 10*(1/5)*sqrt(ry.k.h/ry.m);
    ry.c.rad  = 10*(1/5)*sqrt(ry.k.rad/ry.m);
    ry.c.rrad = 10*(1/5)*sqrt(ry.k.rrad/ry.m);
    ry.c.tilt = 10*(1/1)*sqrt(ry.k.tilt/ry.m);

    %% Positioning parameters
    ry.z_offset = 0.58178; % Z-Offset so that the center of rotation matches the sample center [m]

    %% Save
    save('./mat/stages.mat', 'ry', '-append');
end

8.8 Spindle

This Matlab function is accessible here.

function [rz] = initializeRz(opts_param)
    %% Default values for opts
    opts = struct('rigid', false);

    %% Populate opts with input parameters
    if exist('opts_param','var')
        for opt = fieldnames(opts_param)'
            opts.(opt{1}) = opts_param.(opt{1});
        end
    end

    %%
    rz = struct();

    %% Spindle - Static Properties
    % Spindle - Slip Ring
    rz.slipring.density = 7800; % [kg/m3]
    rz.slipring.color   = [0.792 0.820 0.933];
    rz.slipring.STEP    = './STEPS/rz/Spindle_Slip_Ring.STEP';
    % Spindle - Rotor
    rz.rotor.density    = 7800; % [kg/m3]
    rz.rotor.color      = [0.792 0.820 0.933];
    rz.rotor.STEP       = './STEPS/rz/Spindle_Rotor.STEP';
    % Spindle - Stator
    rz.stator.density   = 7800; % [kg/m3]
    rz.stator.color     = [0.792 0.820 0.933];
    rz.stator.STEP      = './STEPS/rz/Spindle_Stator.STEP';

    % Estimated mass of the mooving part
    rz.m = 250; % [kg]

    %% Spindle - Dynamical Properties
    % Estimated stiffnesses
    rz.k.ax   = 2e9; % Axial Stiffness [N/m]
    rz.k.rad  = 7e8; % Radial Stiffness [N/m]
    rz.k.rot  = 100e6*2*pi/360; % Rotational Stiffness [N*m/deg]

    if opts.rigid
        rz.k.tilt = 1e10; % Vertical Rotational Stiffness [N*m/deg]
    else
        rz.k.tilt = 1e2; % TODO what value should I put? [N*m/deg]
    end

    % TODO
    rz.c.ax   = 2*sqrt(rz.k.ax/rz.m);
    rz.c.rad  = 2*sqrt(rz.k.rad/rz.m);
    rz.c.tilt = 100*sqrt(rz.k.tilt/rz.m);
    rz.c.rot  = 100*sqrt(rz.k.rot/rz.m);

    %% Save
    save('./mat/stages.mat', 'rz', '-append');
end

8.9 Micro Hexapod

This Matlab function is accessible here.

function [micro_hexapod] = initializeMicroHexapod(opts_param)
    %% Default values for opts
    opts = struct();

    %% Populate opts with input parameters
    if exist('opts_param','var')
        for opt = fieldnames(opts_param)'
            opts.(opt{1}) = opts_param.(opt{1});
        end
    end

    %% Stewart Object
    micro_hexapod = struct();
    micro_hexapod.h        = 350; % Total height of the platform [mm]
%     micro_hexapod.jacobian = 269.26; % Distance from the top platform to the Jacobian point [mm]
    micro_hexapod.jacobian = 270; % Distance from the top platform to the Jacobian point [mm]

    %% Bottom Plate - Mechanical Design
    BP = struct();

    BP.rad.int   = 110;   % Internal Radius [mm]
    BP.rad.ext   = 207.5; % External Radius [mm]
    BP.thickness = 26;    % Thickness [mm]
    BP.leg.rad   = 175.5; % Radius where the legs articulations are positionned [mm]
    BP.leg.ang   = 9.5;   % Angle Offset [deg]
    BP.density   = 8000;  % Density of the material [kg/m^3]
    BP.color     = [0.6 0.6 0.6]; % Color [rgb]
    BP.shape     = [BP.rad.int BP.thickness; BP.rad.int 0; BP.rad.ext 0; BP.rad.ext BP.thickness];

    %% Top Plate - Mechanical Design
    TP = struct();

    TP.rad.int   = 82;   % Internal Radius [mm]
    TP.rad.ext   = 150;  % Internal Radius [mm]
    TP.thickness = 26;   % Thickness [mm]
    TP.leg.rad   = 118;  % Radius where the legs articulations are positionned [mm]
    TP.leg.ang   = 12.1; % Angle Offset [deg]
    TP.density   = 8000; % Density of the material [kg/m^3]
    TP.color     = [0.6 0.6 0.6]; % Color [rgb]
    TP.shape     = [TP.rad.int TP.thickness; TP.rad.int 0; TP.rad.ext 0; TP.rad.ext TP.thickness];

    %% Struts
    Leg = struct();

    Leg.stroke     = 10e-3; % Maximum Stroke of each leg [m]
    Leg.k.ax       = 5e7;   % Stiffness of each leg [N/m]
    Leg.ksi.ax     = 3;     % Maximum amplification at resonance []
    Leg.rad.bottom = 25;    % Radius of the cylinder of the bottom part [mm]
    Leg.rad.top    = 17;    % Radius of the cylinder of the top part [mm]
    Leg.density    = 8000;  % Density of the material [kg/m^3]
    Leg.color.bottom  = [0.5 0.5 0.5]; % Color [rgb]
    Leg.color.top     = [0.5 0.5 0.5]; % Color [rgb]

    Leg.sphere.bottom = Leg.rad.bottom; % Size of the sphere at the end of the leg [mm]
    Leg.sphere.top    = Leg.rad.top; % Size of the sphere at the end of the leg [mm]
    Leg.m             = TP.density*((pi*(TP.rad.ext/1000)^2)*(TP.thickness/1000)-(pi*(TP.rad.int/1000^2))*(TP.thickness/1000))/6; % TODO [kg]
    Leg = updateDamping(Leg);


    %% Sphere
    SP = struct();

    SP.height.bottom  = 27; % [mm]
    SP.height.top     = 27; % [mm]
    SP.density.bottom = 8000; % [kg/m^3]
    SP.density.top    = 8000; % [kg/m^3]
    SP.color.bottom   = [0.6 0.6 0.6]; % [rgb]
    SP.color.top      = [0.6 0.6 0.6]; % [rgb]
    SP.k.ax           = 0; % [N*m/deg]
    SP.ksi.ax         = 10;

    SP.thickness.bottom = SP.height.bottom-Leg.sphere.bottom; % [mm]
    SP.thickness.top    = SP.height.top-Leg.sphere.top; % [mm]
    SP.rad.bottom       = Leg.sphere.bottom; % [mm]
    SP.rad.top          = Leg.sphere.top; % [mm]
    SP.m                = SP.density.bottom*2*pi*((SP.rad.bottom*1e-3)^2)*(SP.height.bottom*1e-3); % TODO [kg]

    SP = updateDamping(SP);

    %%
    Leg.support.bottom = [0 SP.thickness.bottom; 0 0; SP.rad.bottom 0; SP.rad.bottom SP.height.bottom];
    Leg.support.top    = [0 SP.thickness.top; 0 0; SP.rad.top 0; SP.rad.top SP.height.top];

    %%
    micro_hexapod.BP = BP;
    micro_hexapod.TP = TP;
    micro_hexapod.Leg = Leg;
    micro_hexapod.SP = SP;

    %%
    micro_hexapod = initializeParameters(micro_hexapod);

    %% Save
    save('./mat/stages.mat', 'micro_hexapod', '-append');

    %%
    function [element] = updateDamping(element)
        field = fieldnames(element.k);
        for i = 1:length(field)
            element.c.(field{i}) = 1/element.ksi.(field{i})*sqrt(element.k.(field{i})/element.m);
        end
    end

    %%
    function [stewart] = initializeParameters(stewart)
        %% Connection points on base and top plate w.r.t. World frame at the center of the base plate
        stewart.pos_base = zeros(6, 3);
        stewart.pos_top = zeros(6, 3);

        alpha_b = stewart.BP.leg.ang*pi/180; % angle de décalage par rapport à 120 deg (pour positionner les supports bases)
        alpha_t = stewart.TP.leg.ang*pi/180; % +- offset angle from 120 degree spacing on top

        height = (stewart.h-stewart.BP.thickness-stewart.TP.thickness-stewart.Leg.sphere.bottom-stewart.Leg.sphere.top-stewart.SP.thickness.bottom-stewart.SP.thickness.top)*0.001; % TODO

        radius_b = stewart.BP.leg.rad*0.001; % rayon emplacement support base
        radius_t = stewart.TP.leg.rad*0.001; % top radius in meters

        for i = 1:3
          % base points
          angle_m_b = (2*pi/3)* (i-1) - alpha_b;
          angle_p_b = (2*pi/3)* (i-1) + alpha_b;
          stewart.pos_base(2*i-1,:) =  [radius_b*cos(angle_m_b), radius_b*sin(angle_m_b), 0.0];
          stewart.pos_base(2*i,:) = [radius_b*cos(angle_p_b), radius_b*sin(angle_p_b), 0.0];

          % top points
          % Top points are 60 degrees offset
          angle_m_t = (2*pi/3)* (i-1) - alpha_t + 2*pi/6;
          angle_p_t = (2*pi/3)* (i-1) + alpha_t + 2*pi/6;
          stewart.pos_top(2*i-1,:) = [radius_t*cos(angle_m_t), radius_t*sin(angle_m_t), height];
          stewart.pos_top(2*i,:) = [radius_t*cos(angle_p_t), radius_t*sin(angle_p_t), height];
        end

        % permute pos_top points so that legs are end points of base and top points
        stewart.pos_top = [stewart.pos_top(6,:); stewart.pos_top(1:5,:)]; %6th point on top connects to 1st on bottom
        stewart.pos_top_tranform = stewart.pos_top - height*[zeros(6, 2),ones(6, 1)];

        %% leg vectors
        legs = stewart.pos_top - stewart.pos_base;
        leg_length = zeros(6, 1);
        leg_vectors = zeros(6, 3);
        for i = 1:6
          leg_length(i) = norm(legs(i,:));
          leg_vectors(i,:)  = legs(i,:) / leg_length(i);
        end

        stewart.Leg.lenght = 1000*leg_length(1)/1.5;
        stewart.Leg.shape.bot = [0 0; ...
                                stewart.Leg.rad.bottom 0; ...
                                stewart.Leg.rad.bottom stewart.Leg.lenght; ...
                                stewart.Leg.rad.top stewart.Leg.lenght; ...
                                stewart.Leg.rad.top 0.2*stewart.Leg.lenght; ...
                                0 0.2*stewart.Leg.lenght];

        %% Calculate revolute and cylindrical axes
        rev1 = zeros(6, 3);
        rev2 = zeros(6, 3);
        cyl1 = zeros(6, 3);
        for i = 1:6
          rev1(i,:) = cross(leg_vectors(i,:), [0 0 1]);
          rev1(i,:) = rev1(i,:) / norm(rev1(i,:));

          rev2(i,:) = - cross(rev1(i,:), leg_vectors(i,:));
          rev2(i,:) = rev2(i,:) / norm(rev2(i,:));

          cyl1(i,:) = leg_vectors(i,:);
        end


        %% Coordinate systems
        stewart.lower_leg = struct('rotation', eye(3));
        stewart.upper_leg = struct('rotation', eye(3));

        for i = 1:6
          stewart.lower_leg(i).rotation = [rev1(i,:)', rev2(i,:)', cyl1(i,:)'];
          stewart.upper_leg(i).rotation = [rev1(i,:)', rev2(i,:)', cyl1(i,:)'];
        end

        %% Position Matrix
        stewart.M_pos_base = stewart.pos_base + (height+(stewart.TP.thickness+stewart.Leg.sphere.top+stewart.SP.thickness.top+stewart.jacobian)*1e-3)*[zeros(6, 2),ones(6, 1)];

        %% Compute Jacobian Matrix
        aa = stewart.pos_top_tranform + (stewart.jacobian - stewart.TP.thickness - stewart.SP.height.top)*1e-3*[zeros(6, 2),ones(6, 1)];
        stewart.J  = getJacobianMatrix(leg_vectors', aa');
    end

    function J  = getJacobianMatrix(RM,M_pos_base)
        % RM: [3x6] unit vector of each leg in the fixed frame
        % M_pos_base: [3x6] vector of the leg connection at the top platform location in the fixed frame
        J = zeros(6);
        J(:, 1:3) = RM';
        J(:, 4:6) = cross(M_pos_base, RM)';
    end
end

8.10 Center of gravity compensation

This Matlab function is accessible here.

function [axisc] = initializeAxisc()
    %%
    axisc = struct();

    %% Axis Compensator - Static Properties
    % Structure
    axisc.structure.density = 3400; % [kg/m3]
    axisc.structure.color   = [0.792 0.820 0.933];
    axisc.structure.STEP    = './STEPS/axisc/axisc_structure.STEP';
    % Wheel
    axisc.wheel.density     = 2700; % [kg/m3]
    axisc.wheel.color       = [0.753 0.753 0.753];
    axisc.wheel.STEP        = './STEPS/axisc/axisc_wheel.STEP';
    % Mass
    axisc.mass.density      = 7800; % [kg/m3]
    axisc.mass.color        = [0.792 0.820 0.933];
    axisc.mass.STEP         = './STEPS/axisc/axisc_mass.STEP';
    % Gear
    axisc.gear.density      = 7800; % [kg/m3]
    axisc.gear.color        = [0.792 0.820 0.933];
    axisc.gear.STEP         = './STEPS/axisc/axisc_gear.STEP';

    axisc.m      = 40; % TODO [kg]

    %% Axis Compensator - Dynamical Properties
    axisc.k.ax   = 1; % TODO [N*m/deg)]
    axisc.c.ax   = (1/1)*sqrt(axisc.k.ax/axisc.m);

    %% Save
    save('./mat/stages.mat', 'axisc', '-append');
end

8.11 Mirror

This Matlab function is accessible here.

function [] = initializeMirror(opts_param)
    %% Default values for opts
    opts = struct(...
        'shape', 'spherical', ... % spherical or conical
        'angle', 45 ...
    );

    %% Populate opts with input parameters
    if exist('opts_param','var')
        for opt = fieldnames(opts_param)'
            opts.(opt{1}) = opts_param.(opt{1});
        end
    end

    %%
    mirror = struct();
    mirror.h = 50; % height of the mirror [mm]
    mirror.thickness = 25; % Thickness of the plate supporting the sample [mm]
    mirror.hole_rad = 120; % radius of the hole in the mirror [mm]
    mirror.support_rad = 100; % radius of the support plate [mm]
    mirror.jacobian = 150; % point of interest offset in z (above the top surfave) [mm]
    mirror.rad = 180; % radius of the mirror (at the bottom surface) [mm]

    mirror.density = 2400; % Density of the mirror [kg/m3]
    mirror.color = [0.4 1.0 1.0]; % Color of the mirror

    mirror.cone_length = mirror.rad*tand(opts.angle)+mirror.h+mirror.jacobian; % Distance from Apex point of the cone to jacobian point

    %% Shape
    mirror.shape = [...
        0 mirror.h-mirror.thickness
        mirror.hole_rad mirror.h-mirror.thickness; ...
        mirror.hole_rad 0; ...
        mirror.rad 0 ...
    ];

    if strcmp(opts.shape, 'spherical')
        mirror.sphere_radius = sqrt((mirror.jacobian+mirror.h)^2+mirror.rad^2); % Radius of the sphere [mm]

        for z = linspace(0, mirror.h, 101)
            mirror.shape = [mirror.shape; sqrt(mirror.sphere_radius^2-(z-mirror.jacobian-mirror.h)^2) z];
        end
    elseif strcmp(opts.shape, 'conical')
        mirror.shape = [mirror.shape; mirror.rad+mirror.h/tand(opts.angle) mirror.h];
    else
        error('Shape should be either conical or spherical');
    end

    mirror.shape = [mirror.shape; 0 mirror.h];

    %% Save
    save('./mat/stages.mat', 'mirror', '-append');
end

8.12 Nano Hexapod

This Matlab function is accessible here.

function [nano_hexapod] = initializeNanoHexapod(opts_param)
    %% Default values for opts
    opts = struct('actuator', 'piezo');

    %% Populate opts with input parameters
    if exist('opts_param','var')
        for opt = fieldnames(opts_param)'
            opts.(opt{1}) = opts_param.(opt{1});
        end
    end

    %% Stewart Object
    nano_hexapod = struct();
    nano_hexapod.h        = 90;  % Total height of the platform [mm]
    nano_hexapod.jacobian = 175; % Point where the Jacobian is computed => Center of rotation [mm]
%     nano_hexapod.jacobian = 174.26; % Point where the Jacobian is computed => Center of rotation [mm]

    %% Bottom Plate
    BP = struct();

    BP.rad.int   = 0;   % Internal Radius [mm]
    BP.rad.ext   = 150; % External Radius [mm]
    BP.thickness = 10;  % Thickness [mm]
    BP.leg.rad   = 100; % Radius where the legs articulations are positionned [mm]
    BP.leg.ang   = 5;   % Angle Offset [deg]
    BP.density   = 8000;% Density of the material [kg/m^3]
    BP.color     = [0.7 0.7 0.7]; % Color [rgb]
    BP.shape     = [BP.rad.int BP.thickness; BP.rad.int 0; BP.rad.ext 0; BP.rad.ext BP.thickness];

    %% Top Plate
    TP = struct();

    TP.rad.int   = 0;   % Internal Radius [mm]
    TP.rad.ext   = 100; % Internal Radius [mm]
    TP.thickness = 10;  % Thickness [mm]
    TP.leg.rad   = 90;  % Radius where the legs articulations are positionned [mm]
    TP.leg.ang   = 5;   % Angle Offset [deg]
    TP.density   = 8000;% Density of the material [kg/m^3]
    TP.color     = [0.7 0.7 0.7]; % Color [rgb]
    TP.shape     = [TP.rad.int TP.thickness; TP.rad.int 0; TP.rad.ext 0; TP.rad.ext TP.thickness];

    %% Leg
    Leg = struct();

    Leg.stroke     = 80e-6; % Maximum Stroke of each leg [m]
    if strcmp(opts.actuator, 'piezo')
        Leg.k.ax   = 1e7;   % Stiffness of each leg [N/m]
    elseif strcmp(opts.actuator, 'lorentz')
        Leg.k.ax   = 1e4;   % Stiffness of each leg [N/m]
    else
        error('opts.actuator should be piezo or lorentz');
    end
    Leg.ksi.ax     = 10;    % Maximum amplification at resonance []
    Leg.rad.bottom = 12;    % Radius of the cylinder of the bottom part [mm]
    Leg.rad.top    = 10;    % Radius of the cylinder of the top part [mm]
    Leg.density    = 8000;  % Density of the material [kg/m^3]
    Leg.color.bottom  = [0.5 0.5 0.5]; % Color [rgb]
    Leg.color.top     = [0.5 0.5 0.5]; % Color [rgb]

    Leg.sphere.bottom = Leg.rad.bottom; % Size of the sphere at the end of the leg [mm]
    Leg.sphere.top    = Leg.rad.top; % Size of the sphere at the end of the leg [mm]
    Leg.m             = TP.density*((pi*(TP.rad.ext/1000)^2)*(TP.thickness/1000)-(pi*(TP.rad.int/1000^2))*(TP.thickness/1000))/6; % TODO [kg]

    Leg = updateDamping(Leg);


    %% Sphere
    SP = struct();

    SP.height.bottom  = 15; % [mm]
    SP.height.top     = 15; % [mm]
    SP.density.bottom = 8000; % [kg/m^3]
    SP.density.top    = 8000; % [kg/m^3]
    SP.color.bottom   = [0.7 0.7 0.7]; % [rgb]
    SP.color.top      = [0.7 0.7 0.7]; % [rgb]
    SP.k.ax           = 0; % [N*m/deg]
    SP.ksi.ax         = 3;

    SP.thickness.bottom = SP.height.bottom-Leg.sphere.bottom; % [mm]
    SP.thickness.top    = SP.height.top-Leg.sphere.top; % [mm]
    SP.rad.bottom       = Leg.sphere.bottom; % [mm]
    SP.rad.top          = Leg.sphere.top; % [mm]
    SP.m                = SP.density.bottom*2*pi*((SP.rad.bottom*1e-3)^2)*(SP.height.bottom*1e-3); % TODO [kg]

    SP = updateDamping(SP);

    %%
    Leg.support.bottom = [0 SP.thickness.bottom; 0 0; SP.rad.bottom 0; SP.rad.bottom SP.height.bottom];
    Leg.support.top    = [0 SP.thickness.top; 0 0; SP.rad.top 0; SP.rad.top SP.height.top];

    %%
    nano_hexapod.BP = BP;
    nano_hexapod.TP = TP;
    nano_hexapod.Leg = Leg;
    nano_hexapod.SP = SP;

    %%
    nano_hexapod = initializeParameters(nano_hexapod);

    %% Save
    save('./mat/stages.mat', 'nano_hexapod', '-append');

    %%
    function [element] = updateDamping(element)
        field = fieldnames(element.k);
        for i = 1:length(field)
            element.c.(field{i}) = 1/element.ksi.(field{i})*sqrt(element.k.(field{i})/element.m);
        end
    end

    %%
    function [stewart] = initializeParameters(stewart)
        %% Connection points on base and top plate w.r.t. World frame at the center of the base plate
        stewart.pos_base = zeros(6, 3);
        stewart.pos_top = zeros(6, 3);

        alpha_b = stewart.BP.leg.ang*pi/180; % angle de décalage par rapport à 120 deg (pour positionner les supports bases)
        alpha_t = stewart.TP.leg.ang*pi/180; % +- offset angle from 120 degree spacing on top

        height = (stewart.h-stewart.BP.thickness-stewart.TP.thickness-stewart.Leg.sphere.bottom-stewart.Leg.sphere.top-stewart.SP.thickness.bottom-stewart.SP.thickness.top)*0.001; % TODO

        radius_b = stewart.BP.leg.rad*0.001; % rayon emplacement support base
        radius_t = stewart.TP.leg.rad*0.001; % top radius in meters

        for i = 1:3
          % base points
          angle_m_b = (2*pi/3)* (i-1) - alpha_b;
          angle_p_b = (2*pi/3)* (i-1) + alpha_b;
          stewart.pos_base(2*i-1,:) =  [radius_b*cos(angle_m_b), radius_b*sin(angle_m_b), 0.0];
          stewart.pos_base(2*i,:) = [radius_b*cos(angle_p_b), radius_b*sin(angle_p_b), 0.0];

          % top points
          % Top points are 60 degrees offset
          angle_m_t = (2*pi/3)* (i-1) - alpha_t + 2*pi/6;
          angle_p_t = (2*pi/3)* (i-1) + alpha_t + 2*pi/6;
          stewart.pos_top(2*i-1,:) = [radius_t*cos(angle_m_t), radius_t*sin(angle_m_t), height];
          stewart.pos_top(2*i,:) = [radius_t*cos(angle_p_t), radius_t*sin(angle_p_t), height];
        end

        % permute pos_top points so that legs are end points of base and top points
        stewart.pos_top = [stewart.pos_top(6,:); stewart.pos_top(1:5,:)]; %6th point on top connects to 1st on bottom
        stewart.pos_top_tranform = stewart.pos_top - height*[zeros(6, 2),ones(6, 1)];

        %% leg vectors
        legs = stewart.pos_top - stewart.pos_base;
        leg_length = zeros(6, 1);
        leg_vectors = zeros(6, 3);
        for i = 1:6
          leg_length(i) = norm(legs(i,:));
          leg_vectors(i,:)  = legs(i,:) / leg_length(i);
        end

        stewart.Leg.lenght = 1000*leg_length(1)/1.5;
        stewart.Leg.shape.bot = [0 0; ...
                                stewart.Leg.rad.bottom 0; ...
                                stewart.Leg.rad.bottom stewart.Leg.lenght; ...
                                stewart.Leg.rad.top stewart.Leg.lenght; ...
                                stewart.Leg.rad.top 0.2*stewart.Leg.lenght; ...
                                0 0.2*stewart.Leg.lenght];

        %% Calculate revolute and cylindrical axes
        rev1 = zeros(6, 3);
        rev2 = zeros(6, 3);
        cyl1 = zeros(6, 3);
        for i = 1:6
          rev1(i,:) = cross(leg_vectors(i,:), [0 0 1]);
          rev1(i,:) = rev1(i,:) / norm(rev1(i,:));

          rev2(i,:) = - cross(rev1(i,:), leg_vectors(i,:));
          rev2(i,:) = rev2(i,:) / norm(rev2(i,:));

          cyl1(i,:) = leg_vectors(i,:);
        end


        %% Coordinate systems
        stewart.lower_leg = struct('rotation', eye(3));
        stewart.upper_leg = struct('rotation', eye(3));

        for i = 1:6
          stewart.lower_leg(i).rotation = [rev1(i,:)', rev2(i,:)', cyl1(i,:)'];
          stewart.upper_leg(i).rotation = [rev1(i,:)', rev2(i,:)', cyl1(i,:)'];
        end

        %% Position Matrix
        stewart.M_pos_base = stewart.pos_base + (height+(stewart.TP.thickness+stewart.Leg.sphere.top+stewart.SP.thickness.top+stewart.jacobian)*1e-3)*[zeros(6, 2),ones(6, 1)];

        %% Compute Jacobian Matrix
        aa = stewart.pos_top_tranform + (stewart.jacobian - stewart.TP.thickness - stewart.SP.height.top)*1e-3*[zeros(6, 2),ones(6, 1)];
        stewart.J  = getJacobianMatrix(leg_vectors', aa');
    end

    function J  = getJacobianMatrix(RM,M_pos_base)
        % RM: [3x6] unit vector of each leg in the fixed frame
        % M_pos_base: [3x6] vector of the leg connection at the top platform location in the fixed frame
        J = zeros(6);
        J(:, 1:3) = RM';
        J(:, 4:6) = cross(M_pos_base, RM)';
    end
end

8.13 Sample

This Matlab function is accessible here.

function [sample] = initializeSample(opts_param)
    %% Default values for opts
    sample = struct('radius', 100, ...
                    'height', 300, ...
                    'mass',   50,  ...
                    'offset', 0,   ...
                    'color',  [0.45, 0.45, 0.45] ...
    );

    %% Populate opts with input parameters
    if exist('opts_param','var')
        for opt = fieldnames(opts_param)'
            sample.(opt{1}) = opts_param.(opt{1});
        end
    end

    %%
    sample.k.x = 1e8;
    sample.c.x = sqrt(sample.k.x*sample.mass)/10;

    sample.k.y = 1e8;
    sample.c.y = sqrt(sample.k.y*sample.mass)/10;

    sample.k.z = 1e8;
    sample.c.z = sqrt(sample.k.y*sample.mass)/10;

    %% Save
    save('./mat/stages.mat', 'sample', '-append');
end

Author: Dehaeze Thomas

Created: 2019-10-24 jeu. 17:45

Validate