correct one plot
This commit is contained in:
parent
a581bc9dbd
commit
78c8b79399
Binary file not shown.
Binary file not shown.
Before Width: | Height: | Size: 189 KiB After Width: | Height: | Size: 151 KiB |
@ -317,5 +317,7 @@ Verification that nothing is moving
|
||||
#+caption: Motion of the sample at the start of the simulation in presence of gravity when compensating the gravity forces ([[./figs/transient_phase_gravity_compensation.png][png]], [[./figs/transient_phase_gravity_compensation.pdf][pdf]])
|
||||
[[file:figs/transient_phase_gravity_compensation.png]]
|
||||
* Conclusion
|
||||
This initialization technique permits to compute the required forces/torques to be applied in each joint in order to compensate for gravity forces.
|
||||
This initialization should be redone for each configuration (change of sample mass, change of tilt angle), but not when changing the stiffness of joints, for instant when changing from lorentz based nano-hexapod or piezo based.
|
||||
#+begin_important
|
||||
This initialization technique permits to compute the required forces/torques to be applied in each joint in order to compensate for gravity forces.
|
||||
This initialization should be redone for each configuration (change of sample mass, change of tilt angle), but not when changing the stiffness of joints, for instant when changing from lorentz based nano-hexapod or piezo based.
|
||||
#+end_important
|
||||
|
Loading…
Reference in New Issue
Block a user