[WIP] Breaking Change - Use Update

Folder name is changed, rework the html templates
Change the organisation.

.gitignore

@@ -1,8 +1,10 @@
 auto/
 *.tex
+
 **/figs/*.pdf
 **/figs/*.svg
-=======
+**/figs/*.tex
+
 # Emacs
 auto/
 

2017-11-17 - Marc/index.org

@@ -1,27 +1,5 @@
 #+TITLE: Measurements
-:drawer:
+#+SETUPFILE: ../config.org
-#+STARTUP: overview
-
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/htmlize.css"/>
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/readtheorg.css"/>
-#+HTML_HEAD: <script src="../js/jquery.min.js"></script>
-#+HTML_HEAD: <script src="../js/bootstrap.min.js"></script>
-#+HTML_HEAD: <script src="../js/jquery.stickytableheaders.min.js"></script>
-#+HTML_HEAD: <script src="../js/readtheorg.js"></script>
-
-#+LATEX_CLASS: cleanreport
-#+LaTeX_CLASS_OPTIONS: [tocnp, secbreak, minted]
-
-#+PROPERTY: header-args:matlab  :session *MATLAB*
-#+PROPERTY: header-args:matlab+ :comments org
-#+PROPERTY: header-args:matlab+ :exports both
-#+PROPERTY: header-args:matlab+ :eval no-export
-#+PROPERTY: header-args:matlab+ :noweb yes
-#+PROPERTY: header-args:matlab+ :mkdirp yes
-#+PROPERTY: header-args:matlab+ :output-dir figs
-:end:
-
-[[../index.org][Back to main page]].
 
 * Experimental conditions
 - Measurement made in a metrology lab
@@ -33,12 +11,12 @@
 
 #+name: fig:accelerometers
 #+caption: Accelerometers position
-#+attr_latex: :width 0.5\linewidth
+#+attr_html: :width 500px
 [[file:./figs/accelerometers.png]]
 
 #+name: fig:instrumented_hammer
 #+caption: Instrumented Hammer used
-#+attr_latex: :width 0.5\linewidth
+#+attr_html: :width 500px
 [[file:./figs/instrumented_hammer.png]]
 
 * Measurements procedure
@@ -101,7 +79,11 @@ For each of the measurement, the measured channels are shown on table [[tab:meas
 
 * Data Analysis
 ** Loading of the data
-#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+  <<matlab-dir>>
+#+end_src
+
+#+begin_src matlab :exports none :results silent :noweb yes
   <<matlab-init>>
 #+end_src
 

2018-01-12 - Marc/index.org

@@ -1,27 +1,5 @@
 #+TITLE: Measurements
-:drawer:
+#+SETUPFILE: ../config.org
-#+STARTUP: overview
-
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/htmlize.css"/>
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/readtheorg.css"/>
-#+HTML_HEAD: <script src="../js/jquery.min.js"></script>
-#+HTML_HEAD: <script src="../js/bootstrap.min.js"></script>
-#+HTML_HEAD: <script src="../js/jquery.stickytableheaders.min.js"></script>
-#+HTML_HEAD: <script src="../js/readtheorg.js"></script>
-
-#+LATEX_CLASS: cleanreport
-#+LaTeX_CLASS_OPTIONS: [tocnp, secbreak, minted]
-
-#+PROPERTY: header-args:matlab  :session *MATLAB*
-#+PROPERTY: header-args:matlab+ :comments org
-#+PROPERTY: header-args:matlab+ :exports both
-#+PROPERTY: header-args:matlab+ :eval no-export
-#+PROPERTY: header-args:matlab+ :noweb yes
-#+PROPERTY: header-args:matlab+ :mkdirp yes
-#+PROPERTY: header-args:matlab+ :output-dir figs
-:end:
-
-[[../index.org][Back to main page]].
 
 * Experimental conditions
 - The granite is not glued to the floor
@@ -72,7 +50,11 @@ The structure is excited using an *instrumented hammer* with impacts on
 
 * Data Analysis
 ** Loading and pre-processing of the data
-#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+  <<matlab-dir>>
+#+end_src
+
+#+begin_src matlab :exports none :results silent :noweb yes
   <<matlab-init>>
 #+end_src
 

2018-01-12 - Marc/scripts/id31_microstation_12january2018.m

@@ -378,4 +378,3 @@ legend(leg1,leg6,'Location','SouthEast');
 grid
 % saveas(gcf,'comp_frf_z_hammer_hexa','fig')
 % print -dpng comp_frf_z_hammer_hexa
-

2018-10-12 - Marc/index.org

@@ -1,27 +1,5 @@
 #+TITLE: Measurements
-:drawer:
+#+SETUPFILE: ../config.org
-#+STARTUP: overview
-
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/htmlize.css"/>
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/readtheorg.css"/>
-#+HTML_HEAD: <script src="../js/jquery.min.js"></script>
-#+HTML_HEAD: <script src="../js/bootstrap.min.js"></script>
-#+HTML_HEAD: <script src="../js/jquery.stickytableheaders.min.js"></script>
-#+HTML_HEAD: <script src="../js/readtheorg.js"></script>
-
-#+LATEX_CLASS: cleanreport
-#+LaTeX_CLASS_OPTIONS: [tocnp, secbreak, minted]
-
-#+PROPERTY: header-args:matlab  :session *MATLAB*
-#+PROPERTY: header-args:matlab+ :comments org
-#+PROPERTY: header-args:matlab+ :exports both
-#+PROPERTY: header-args:matlab+ :eval no-export
-#+PROPERTY: header-args:matlab+ :noweb yes
-#+PROPERTY: header-args:matlab+ :mkdirp yes
-#+PROPERTY: header-args:matlab+ :output-dir figs
-:end:
-
-[[../index.org][Back to main page]].
 
 * Experimental conditions
 - Measurement made in the experiment hutch
@@ -87,7 +65,11 @@ Les fichiers xxx_raw sont sans traitement dans le domaine temporel (environ 10 i
 
 * Data Analysis
 ** Loading of the data
-#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+  <<matlab-dir>>
+#+end_src
+
+#+begin_src matlab :exports none :results silent :noweb yes
   <<matlab-init>>
 #+end_src
 

2018-10-15 - Marc/index.org

@@ -1,34 +1,18 @@
 #+TITLE: Measurement Analysis
-:drawer:
+#+SETUPFILE: ../config.org
-#+STARTUP: overview
 
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/htmlize.css"/>
+* Matlab Init                                               :noexport:ignore:
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/readtheorg.css"/>
+#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
-#+HTML_HEAD: <script src="../js/jquery.min.js"></script>
+  <<matlab-dir>>
-#+HTML_HEAD: <script src="../js/bootstrap.min.js"></script>
+#+end_src
-#+HTML_HEAD: <script src="../js/jquery.stickytableheaders.min.js"></script>
-#+HTML_HEAD: <script src="../js/readtheorg.js"></script>
 
-#+LATEX_CLASS: cleanreport
+#+begin_src matlab :exports none :results silent :noweb yes
-#+LaTeX_CLASS_OPTIONS: [tocnp, secbreak, minted]
-
-#+PROPERTY: header-args:matlab  :session *MATLAB*
-#+PROPERTY: header-args:matlab+ :comments org
-#+PROPERTY: header-args:matlab+ :exports both
-#+PROPERTY: header-args:matlab+ :eval no-export
-#+PROPERTY: header-args:matlab+ :noweb yes
-#+PROPERTY: header-args:matlab+ :mkdirp yes
-#+PROPERTY: header-args:matlab+ :output-dir figs
-:end:
-
-[[../index.org][Back to main page]].
-
-#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
   <<matlab-init>>
 #+end_src
 
 * Measurement Description
 #+name: fig:setup_picture
+#+attr_html: :width 500px
 #+caption: Picture of the setup for the measurement
 [[file:./figs/setup_picture.png]]
 

Ground Motion/index.org

@@ -1,29 +1,12 @@
 #+TITLE: Ground Motion Measurements
-:drawer:
+#+SETUPFILE: ../config.org
-#+STARTUP: overview
 
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/htmlize.css"/>
+* Matlab Init                                               :noexport:ignore:
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/readtheorg.css"/>
+#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
-#+HTML_HEAD: <script src="../js/jquery.min.js"></script>
+  <<matlab-dir>>
-#+HTML_HEAD: <script src="../js/bootstrap.min.js"></script>
+#+end_src
-#+HTML_HEAD: <script src="../js/jquery.stickytableheaders.min.js"></script>
-#+HTML_HEAD: <script src="../js/readtheorg.js"></script>
 
-#+LATEX_CLASS: cleanreport
+#+begin_src matlab :exports none :results silent :noweb yes
-#+LaTeX_CLASS_OPTIONS: [tocnp, secbreak, minted]
-
-#+PROPERTY: header-args:matlab  :session *MATLAB*
-#+PROPERTY: header-args:matlab+ :comments org
-#+PROPERTY: header-args:matlab+ :exports both
-#+PROPERTY: header-args:matlab+ :eval no-export
-#+PROPERTY: header-args:matlab+ :noweb yes
-#+PROPERTY: header-args:matlab+ :mkdirp yes
-#+PROPERTY: header-args:matlab+ :output-dir figs
-:end:
-
-[[../index.org][Back to main page]].
-
-#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
   <<matlab-init>>
 #+end_src
 

Spindle/data/10turns_60rmp_Icepap-FIR/res.txt

@@ -1,110 +0,0 @@
-Error X et Y
-
-LSCxtot =
-
-    0.3872
-
-
-LSCytot =
-
-    0.2419
-
-
-LSCxsync =
-
-    0.1577
-
-
-LSCysync =
-
-    0.1602
-
-
-LSCxasync =
-
-    0.2946
-
-
-LSCyasync =
-
-    0.1103
-
-
-LSCxytot =
-
-    0.3519
-
-
-Error X2 et Y2
-
-
-LSCxtot =
-
-    0.3354
-
-
-LSCytot =
-
-    0.3202
-
-
-LSCxsync =
-
-    0.1101
-
-
-LSCysync =
-
-    0.0808
-
-
-LSCxasync =
-
-    0.2588
-
-
-LSCyasync =
-
-    0.2791
-
-
-LSCxytot =
-
-    0.3642
-
-
-
-ErrorZ
-LSCxtot =
-
-    0.0775
-
-
-LSCytot =
-
-    0.0775
-
-
-LSCxsync =
-
-    0.0390
-
-
-LSCysync =
-
-    0.0390
-
-
-LSCxasync =
-
-    0.0617
-
-
-LSCyasync =
-
-    0.0617
-
-
-LSCxytot =
-
-    0.1000

actuators-sensors/index.org

@@ -1,27 +1,5 @@
 #+TITLE: Equipment
-:drawer:
+#+SETUPFILE: ../config.org
-#+STARTUP: overview
-
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/htmlize.css"/>
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/readtheorg.css"/>
-#+HTML_HEAD: <script src="../js/jquery.min.js"></script>
-#+HTML_HEAD: <script src="../js/bootstrap.min.js"></script>
-#+HTML_HEAD: <script src="../js/jquery.stickytableheaders.min.js"></script>
-#+HTML_HEAD: <script src="../js/readtheorg.js"></script>
-
-#+LATEX_CLASS: cleanreport
-#+LaTeX_CLASS_OPTIONS: [tocnp, secbreak, minted]
-
-#+PROPERTY: header-args:matlab  :session *MATLAB*
-#+PROPERTY: header-args:matlab+ :comments org
-#+PROPERTY: header-args:matlab+ :exports both
-#+PROPERTY: header-args:matlab+ :eval no-export
-#+PROPERTY: header-args:matlab+ :noweb yes
-#+PROPERTY: header-args:matlab+ :mkdirp yes
-#+PROPERTY: header-args:matlab+ :output-dir figs
-:end:
-
-[[../index.org][Back to main page]].
 
 * Sensors
 ** Accelerometers
@@ -160,7 +138,11 @@ We define the parameters of the geophone and we plot its bode plot (figure [[fig
 | Weight [g]             |  2150 |
 | Sensitivity [V/(m/s)]  | 276.8 |
 
-#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+  <<matlab-dir>>
+#+end_src
+
+#+begin_src matlab :exports none :results silent :noweb yes
   <<matlab-init>>
 #+end_src
 

config.org

@@ -0,0 +1,27 @@
+#+STARTUP: overview
+
+#+LANGUAGE: en
+#+EMAIL: dehaeze.thomas@gmail.com
+#+AUTHOR: Dehaeze Thomas
+
+#+HTML_LINK_HOME: ../index.html
+#+HTML_LINK_UP: ../index.html
+
+#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/htmlize.css"/>
+#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/readtheorg.css"/>
+#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/zenburn.css"/>
+#+HTML_HEAD: <script type="text/javascript" src="../js/jquery.min.js"></script>
+#+HTML_HEAD: <script type="text/javascript" src="../js/bootstrap.min.js"></script>
+#+HTML_HEAD: <script type="text/javascript" src="../js/jquery.stickytableheaders.min.js"></script>
+#+HTML_HEAD: <script type="text/javascript" src="../js/readtheorg.js"></script>
+
+#+HTML_MATHJAX: align: center tagside: right font: TeX
+
+#+PROPERTY: header-args:matlab  :session *MATLAB*
+#+PROPERTY: header-args:matlab+ :comments org
+#+PROPERTY: header-args:matlab+ :results none
+#+PROPERTY: header-args:matlab+ :exports both
+#+PROPERTY: header-args:matlab+ :eval no-export
+#+PROPERTY: header-args:matlab+ :output-dir figs
+
+#+PROPERTY: header-args:shell  :eval no-export

disturbance-measurement/index.org

@@ -1,28 +1,15 @@
 #+TITLE:Measurement of the sample vibrations when rotating the Spindle
-:DRAWER:
+#+SETUPFILE: ../config.org
-#+STARTUP: overview
-
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/htmlize.css"/>
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/readtheorg.css"/>
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/zenburn.css"/>
-#+HTML_HEAD: <script type="text/javascript" src="../js/jquery.min.js"></script>
-#+HTML_HEAD: <script type="text/javascript" src="../js/bootstrap.min.js"></script>
-#+HTML_HEAD: <script type="text/javascript" src="../js/jquery.stickytableheaders.min.js"></script>
-#+HTML_HEAD: <script type="text/javascript" src="../js/readtheorg.js"></script>
-
-#+PROPERTY: header-args:matlab  :session *MATLAB*
-#+PROPERTY: header-args:matlab+ :comments org
-#+PROPERTY: header-args:matlab+ :results output
-#+PROPERTY: header-args:matlab+ :exports both
-#+PROPERTY: header-args:matlab+ :eval no-export
-#+PROPERTY: header-args:matlab+ :output-dir figs
-:END:
 
 * Experimental Setup
 
 * Signal Processing
 ** Matlab Init                                              :noexport:ignore:
-#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+  <<matlab-dir>>
+#+end_src
+
+#+begin_src matlab :exports none :results silent :noweb yes
   <<matlab-init>>
 #+end_src
 

equipment/equipment.org

@@ -1,15 +1,5 @@
 #+TITLE: Equipment used to make the measurements
-:DRAWER:
+#+SETUPFILE: ../config.org
-#+STARTUP: overview
-
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/htmlize.css"/>
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/readtheorg.css"/>
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/zenburn.css"/>
-#+HTML_HEAD: <script type="text/javascript" src="../js/jquery.min.js"></script>
-#+HTML_HEAD: <script type="text/javascript" src="../js/bootstrap.min.js"></script>
-#+HTML_HEAD: <script type="text/javascript" src="../js/jquery.stickytableheaders.min.js"></script>
-#+HTML_HEAD: <script type="text/javascript" src="../js/readtheorg.js"></script>
-:END:
 
 * Geophone
 L22

huddle-test-geophones/figs/.gitignore

@@ -1,3 +0,0 @@
-*.svg
-*.pdf
-*.tex

huddle-test-geophones/index.org

@@ -1,22 +1,5 @@
 #+TITLE:Huddle Test of the L22 Geophones
-:DRAWER:
+#+SETUPFILE: ../config.org
-#+STARTUP: overview
-
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/htmlize.css"/>
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/readtheorg.css"/>
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/zenburn.css"/>
-#+HTML_HEAD: <script type="text/javascript" src="../js/jquery.min.js"></script>
-#+HTML_HEAD: <script type="text/javascript" src="../js/bootstrap.min.js"></script>
-#+HTML_HEAD: <script type="text/javascript" src="../js/jquery.stickytableheaders.min.js"></script>
-#+HTML_HEAD: <script type="text/javascript" src="../js/readtheorg.js"></script>
-
-#+PROPERTY: header-args:matlab  :session *MATLAB*
-#+PROPERTY: header-args:matlab+ :comments org
-#+PROPERTY: header-args:matlab+ :results output
-#+PROPERTY: header-args:matlab+ :exports both
-#+PROPERTY: header-args:matlab+ :eval no-export
-#+PROPERTY: header-args:matlab+ :output-dir figs
-:END:
 
 * Experimental Setup
 Two L22 geophones are used.
@@ -31,23 +14,40 @@ The voltage amplifiers includes:
 #+name: fig:figure_name
 #+caption: Setup
 #+attr_html: :width 500px
-[[file:./figs/setup.jpg]]
+[[file:./img/setup.jpg]]
 
 #+name: fig:figure_name
 #+caption: Geophones
 #+attr_html: :width 500px
-[[file:./figs/geophones.jpg]]
+[[file:./img/geophones.jpg]]
 
 * Signal Processing
   :PROPERTIES:
-  :header-args:matlab+: :tangle signal_processing.m
+  :header-args:matlab+: :tangle matlab/huddle_test_signal_processing.m
   :header-args:matlab+: :comments org :mkdirp yes
   :END:
-The Matlab computing file for this part is accessible [[file:signal_processing.m][here]].
+  <<sec:huddle_test_signal_processing>>
-The =mat= file containing the measurement data is accessible [[file:mat/data_001.mat][here]].
+
+#+begin_src bash :exports none :results none
+  if [ matlab/huddle_test_signal_processing.m -nt data/huddle_test_signal_processing.zip ]; then
+    cp matlab/huddle_test_signal_processing.m huddle_test_signal_processing.m;
+    zip data/huddle_test_signal_processing \
+        mat/data_001.mat \
+        huddle_test_signal_processing.m;
+    rm huddle_test_signal_processing.m;
+  fi
+#+end_src
+
+#+begin_note
+  All the files (data and Matlab scripts) are accessible [[file:data/huddle_test_signal_processing.zip][here]].
+#+end_note
 
 ** Matlab Init                                              :noexport:ignore:
-#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+  <<matlab-dir>>
+#+end_src
+
+#+begin_src matlab :exports none :results silent :noweb yes
   <<matlab-init>>
 #+end_src
 
@@ -407,17 +407,33 @@ This is then further converted into velocity and compared with the ground veloci
 
 * Compare axis
   :PROPERTIES:
-  :header-args:matlab+: :tangle compare_axis.m
+  :header-args:matlab+: :tangle matlab/huddle_test_compare_axis.m
   :header-args:matlab+: :comments org :mkdirp yes
   :END:
-The Matlab computing file for this part is accessible [[file:compare_axis.m][here]].
+  <<sec:huddle_test_compare_axis>>
-The =mat= files containing the measurement data are accessible with the following links:
+
-- z axis: [[file:mat/data_001.mat][here]].
+#+begin_src bash :exports none :results none
-- east axis: [[file:mat/data_002.mat][here]].
+  if [ matlab/huddle_test_compare_axis.m -nt data/huddle_test_compare_axis.zip ]; then
-- north axis: [[file:mat/data_003.mat][here]].
+    cp matlab/huddle_test_compare_axis.m huddle_test_compare_axis.m;
+    zip data/huddle_test_compare_axis \
+        mat/data_001.mat \
+        mat/data_002.mat \
+        mat/data_003.mat \
+        huddle_test_compare_axis.m;
+    rm huddle_test_compare_axis.m;
+  fi
+#+end_src
+
+#+begin_note
+  All the files (data and Matlab scripts) are accessible [[file:data/huddle_test_compare_axis.zip][here]].
+#+end_note
 
 ** Matlab Init                                              :noexport:ignore:
-#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+  <<matlab-dir>>
+#+end_src
+
+#+begin_src matlab :exports none :results silent :noweb yes
   <<matlab-init>>
 #+end_src
 

huddle-test-geophones/matlab/huddle_test_compare_axis.m

@@ -1,5 +1,10 @@
 % Matlab Init                                              :noexport:ignore:
 
+current_dir='/home/thomas/MEGA/These/meas/huddle-test-geophones/';
+%% Go to current Directory
+cd(current_dir);
+
+%% Clear Workspace and Close figures
 clear; close all; clc;
 
 %% Intialize Laplace variable

huddle-test-geophones/matlab/huddle_test_signal_processing.m

@@ -1,5 +1,10 @@
 % Matlab Init                                              :noexport:ignore:
 
+current_dir='/home/thomas/MEGA/These/meas/huddle-test-geophones/';
+%% Go to current Directory
+cd(current_dir);
+
+%% Clear Workspace and Close figures
 clear; close all; clc;
 
 %% Intialize Laplace variable
@@ -47,24 +52,44 @@ xlim([0 1]);
 % Computation of the ASD of the measured voltage
 % We first define the parameters for the frequency domain analysis.
 
-win = hanning(ceil(length(x1)/100));
+Fs = 1/dt; % [Hz]
-Fs = 1/dt;
+
+win = hanning(ceil(10*Fs));
+
+
+
+% Then we compute the Power Spectral Density using =pwelch= function.
 
 [pxx1, f] = pwelch(x1, win, [], [], Fs);
 [pxx2, ~] = pwelch(x2, win, [], [], Fs);
 
+
+
+% And we plot the result on figure [[fig:asd_voltage]].
+
+
+figure;
+hold on;
+plot(f, sqrt(pxx1));
+plot(f, sqrt(pxx2));
+hold off;
+set(gca, 'xscale', 'log');
+set(gca, 'yscale', 'log');
+xlabel('Frequency [Hz]'); ylabel('ASD of the measured Voltage $\left[\frac{V}{\sqrt{Hz}}\right]$')
+xlim([0.1, 500]);
+
 % Scaling to take into account the sensibility of the geophone and the voltage amplifier
-% The Geophone used are L22.
+% The Geophone used are L22. Their sensibility is shown on figure [[fig:geophone_sensibility]].
-% Their sensibility are shown on figure [[fig:geophone_sensibility]].
 
 
 S0 = 88; % Sensitivity [V/(m/s)]
 f0 = 2; % Cut-off frequnecy [Hz]
-S = (s/2/pi/f0)/(1+s/2/pi/f0);
+
+S = S0*(s/2/pi/f0)/(1+s/2/pi/f0);
 
 figure;
-bodeFig({S});
+bodeFig({S}, logspace(-1, 2, 1000));
-ylabel('Amplitude [V/(m/s)]')
+ylabel('Amplitude $\left[\frac{V}{m/s}\right]$')
 
 
 
@@ -75,20 +100,19 @@ ylabel('Amplitude [V/(m/s)]')
 
 
 % We also take into account the gain of the electronics which is here set to be $60dB$.
-% The amplifiers also include a low pass filter with a cut-off frequency set at 1kHz.
 
 
-G0 = 60; % [dB]
+G0_db = 60; % [dB]
 
-G = 10^(G0/20)/(1+s/2/pi/1000);
+G0 = 10^(60/G0_db); % [abs]
 
 
 
-% We divide the ASD measured (in $\text{V}/\sqrt{\text{Hz}}$) by the transfer function of the voltage amplifier to obtain the ASD of the voltage across the geophone.
+% We divide the ASD measured (in $\text{V}/\sqrt{\text{Hz}}$) by the gain of the voltage amplifier to obtain the ASD of the voltage across the geophone.
 % We further divide the result by the sensibility of the Geophone to obtain the ASD of the velocity in $m/s/\sqrt{Hz}$.
 
 
-scaling = 1./squeeze(abs(freqresp(G*S, f, 'Hz')));
+scaling = 1./squeeze(abs(freqresp(G0*S, f, 'Hz')));
 
 % Computation of the ASD of the velocity
 % The ASD of the measured velocity is shown on figure [[fig:psd_velocity]].
@@ -101,13 +125,13 @@ plot(f, sqrt(pxx2).*scaling);
 hold off;
 set(gca, 'xscale', 'log');
 set(gca, 'yscale', 'log');
-xlabel('Frequency [Hz]'); ylabel('PSD [m/s/sqrt(Hz)]')
+xlabel('Frequency [Hz]'); ylabel('ASD of the measured Velocity $\left[\frac{m/s}{\sqrt{Hz}}\right]$')
-xlim([2, 500]);
+xlim([0.1, 500]);
 
 
 
 % #+NAME: fig:psd_velocity
-% #+CAPTION: Spectral density of the velocity
+% #+CAPTION: Amplitude Spectral Density of the Velocity
 % #+RESULTS: fig:psd_velocity
 % [[file:figs/psd_velocity.png]]
 
@@ -116,12 +140,12 @@ xlim([2, 500]);
 
 figure;
 hold on;
-plot(f, (pxx1.*scaling./f).^2);
+plot(f, (sqrt(pxx1).*scaling)./(2*pi*f));
-plot(f, (pxx2.*scaling./f).^2);
+plot(f, (sqrt(pxx2).*scaling)./(2*pi*f));
 hold off;
 set(gca, 'xscale', 'log'); set(gca, 'yscale', 'log');
-xlabel('Frequency [Hz]'); ylabel('PSD [m/s/sqrt(Hz)]')
+xlabel('Frequency [Hz]'); ylabel('ASD of the displacement $\left[\frac{m}{\sqrt{Hz}}\right]$')
-xlim([2, 500]);
+xlim([0.1, 500]);
 
 % Transfer function between the two geophones
 % We here compute the transfer function from one geophone to the other.
@@ -144,10 +168,10 @@ plot(f, mod(180+180/pi*phase(T12), 360)-180);
 set(gca, 'xscale', 'log');
 ylim([-180, 180]);
 yticks([-180, -90, 0, 90, 180]);
-xlabel('Frequency [Hz]'); ylabel('Phase');
+xlabel('Frequency [Hz]'); ylabel('Phase [deg]');
 
 linkaxes([ax1,ax2],'x');
-xlim([1, 500]);
+xlim([0.1, 500]);
 
 
 
@@ -163,7 +187,7 @@ figure;
 plot(f, coh12);
 set(gca, 'xscale', 'log');
 xlabel('Frequency [Hz]'); ylabel('Coherence');
-ylim([0,1]); xlim([1, 500]);
+ylim([0,1]); xlim([0.1, 500]);
 
 % Estimation of the sensor noise
 % The technique to estimate the sensor noise is taken from cite:barzilai98_techn_measur_noise_sensor_presen.
@@ -196,7 +220,7 @@ ylim([0,1]); xlim([1, 500]);
 % [[file:figs/huddle-test.png]]
 
 % We here assume that each sensor has the same magnitude of instrumental noise ($N = M$).
-% We also assume that $H_1 = H_2 = 1$.
+% We also assume that $S_1 = S_2 = 1$.
 
 % We then obtain:
 % #+NAME: eq:coh_bis
@@ -229,8 +253,8 @@ plot(f, pxx2, '-');
 plot(f, pxxN, 'k--');
 hold off;
 set(gca, 'xscale', 'log'); set(gca, 'yscale', 'log');
-xlabel('Frequency [Hz]'); ylabel('PSD [$V^2/Hz$]');
+xlabel('Frequency [Hz]'); ylabel('PSD of the measured Voltage $\left[\frac{V^2}{Hz}\right]$');
-xlim([1, 500]);
+xlim([0.1, 500]);
 
 
 
@@ -248,5 +272,5 @@ plot(f, sqrt(pxx2).*scaling, '-');
 plot(f, sqrt(pxxN).*scaling, 'k--');
 hold off;
 set(gca, 'xscale', 'log'); set(gca, 'yscale', 'log');
-xlabel('Frequency [Hz]'); ylabel('PSD [$m/s/\sqrt{Hz}$]');
+xlabel('Frequency [Hz]'); ylabel('ASD of the Velocity $\left[\frac{m/s}{\sqrt{Hz}}\right]$');
-xlim([1, 500]);
+xlim([0.1, 500]);

huddle-test-geophones/run_test.m

@@ -1,47 +0,0 @@
-tg = slrt;
-
-%% TODO - Build this application if updated
-
-%%
-if tg.Connected == "Yes"
-    if tg.Status == "stopped"
-        %% Load the application
-        tg.load('test');
-
-        %% Run the application
-        tg.start;
-        pause(10);
-        tg.stop;
-
-        %% Load the data
-        f = SimulinkRealTime.openFTP(tg);
-        mget(f, 'data/data_001.dat');
-        close(f);
-    end
-end
-
-%% Convert the Data
-data = SimulinkRealTime.utils.getFileScopeData('data/data_001.dat').data;
-
-t  = data(:, end);
-x1 = data(:, 1);
-x2 = data(:, 2);
-
-save('mat/data_003.mat', 't', 'x1', 'x2');
-
-%% Plot the data
-figure;
-hold on;
-plot(t, x1);
-plot(t, x2);
-hold off
-xlabel('Time [s]');
-ylabel('Voltage [V]');
-
-%% Compute the PSD
-dt = t(2)-t(1);
-
-window_L = ceil(length(x1)/10);
-window_han = .5*(1 - cos(2*pi*(1:window_L)'/(window_L+1)));
-
-[pxx, f] = pwelch(x1, window_han, 0, [], 1/dt);

huddle-test-geophones/setup.m

@@ -1 +0,0 @@
-Ts = 1e-3; % [s]

index.org

@@ -29,9 +29,11 @@ Dynamics of the station is evaluated using instrumented hammer and accelerometer
 - Obtain a first estimation of resonance frequencies
 
 *** Results
-Resonances have been identified at 45Hz and 75Hz.
+#+begin_important
-However, the quality of the measurements are bad at low frequency.
+- Resonances have been identified at 45Hz and 75Hz
-New measurements should be done with Geophones.
+- However, the quality of the measurements are bad at low frequency
+- New measurements should be done with Geophones
+#+end_important
 
 ** Measurement 2
 [[file:2018-01-12%20-%20Marc/index.org][Link to the analysis]]
@@ -47,10 +49,12 @@ New measurements should be done with Geophones.
 Obtain better coherence at low frequency.
 
 *** Results
-Resonances at 42Hz, 70Hz and 125Hz have been identified.
+#+begin_important
-The coherence is much better than when using accelerometers.
+  - Resonances at 42Hz, 70Hz and 125Hz have been identified
+  - The coherence is much better than when using accelerometers
+#+end_important
 
-** Measurement 3
+** TODO Measurement 3
 [[file:2018-10-12%20-%20Marc/index.org][Link to the analysis]]
 
 *** Notes
@@ -64,6 +68,9 @@ The station is now installed on the experimental hutch with a glued granite (fin
 The station is identified again.
 
 *** Results
+#+begin_important
+
+#+end_important
 
 * Measurements of perturbations
 ** Noise coming from the control loop of each stage
@@ -129,11 +136,11 @@ The goal is to estimate all the error motions induced by the Spindle
 *** Results
 
 * Ressources
-[[file:actuators-sensors/index.org][Actuators and Sensors]]
+- [[file:actuators-sensors/index.org][Actuators and Sensors]]
+- [[file:equipment/equipment.org][Equipment used for the measurements]]
 
 * Other measurements
 - [[file:huddle-test-geophones/index.org][Huddle Test - Geophones]]
 - [[file:disturbance-measurement/index.org][Disturbance Measurement]]
 - [[file:slip-ring-test/index.org][Slip Ring - Noise measurement]]
 - [[file:static-measurements/index.org][Control System Measurement]]
-- [[file:equipment/equipment.org][Equipment used for the measurements]]

instrumentation/index.org

@@ -0,0 +1,510 @@
+#+TITLE: Measurements on the instrumentation
+#+SETUPFILE: ../config.org
+
+* Measure of the noise of the Voltage Amplifier
+  :PROPERTIES:
+  :header-args:matlab+: :tangle matlab/meas_volt_amp.m
+  :header-args:matlab+: :comments org :mkdirp yes
+  :END:
+  <<sec:meas_volt_amp>>
+
+#+begin_src bash :exports none :results none
+  if [ meas_volt_amp.m -nt data/meas_volt_amp.zip ]; then
+    zip data/meas_volt_amp \
+        mat/data_003.mat \
+        mat/data_004.mat \
+        mat/data_005.mat \
+        mat/data_006.mat \
+        meas_volt_amp.m
+  fi
+#+end_src
+
+#+begin_note
+  All the files (data and Matlab scripts) are accessible [[file:data/meas_volt_amp.zip][here]].
+#+end_note
+
+** Measurement Description
+*Goal*:
+- Determine the Voltage Amplifier noise
+
+*Setup*:
+- The two inputs (differential) of the voltage amplifier are shunted with 50Ohms
+- The AC/DC option of the Voltage amplifier is on AC
+- The low pass filter is set to 1hHz
+- We measure the output of the voltage amplifier with a 16bits ADC of the Speedgoat
+
+*Measurements*:
+- =data_003=: Ampli OFF
+- =data_004=: Ampli ON set to 20dB
+- =data_005=: Ampli ON set to 40dB
+- =data_006=: Ampli ON set to 60dB
+
+** Matlab Init                                              :noexport:ignore:
+#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+  <<matlab-dir>>
+#+end_src
+
+#+begin_src matlab :exports none :results silent :noweb yes
+  <<matlab-init>>
+#+end_src
+
+** Load data
+#+begin_src matlab :results none
+  amp_off = load('mat/data_003.mat', 'data'); amp_off = amp_off.data(:, [1,3]);
+  amp_20d = load('mat/data_004.mat', 'data'); amp_20d = amp_20d.data(:, [1,3]);
+  amp_40d = load('mat/data_005.mat', 'data'); amp_40d = amp_40d.data(:, [1,3]);
+  amp_60d = load('mat/data_006.mat', 'data'); amp_60d = amp_60d.data(:, [1,3]);
+#+end_src
+
+** Time Domain
+The time domain signals are shown on figure [[fig:ampli_noise_time]].
+
+#+begin_src matlab :results none :exports none
+  figure;
+  hold on;
+  plot(amp_off(:, 2), amp_off(:, 1), 'DisplayName', 'OFF');
+  plot(amp_20d(:, 2), amp_20d(:, 1), 'DisplayName', '20dB');
+  plot(amp_40d(:, 2), amp_40d(:, 1), 'DisplayName', '40dB');
+  plot(amp_60d(:, 2), amp_60d(:, 1), 'DisplayName', '60dB');
+  hold off;
+  legend('Location', 'northeast');
+  xlabel('Time [s]');
+  ylabel('Voltage [V]');
+#+end_src
+
+#+NAME: fig:ampli_noise_time
+#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
+#+begin_src matlab :var filepath="figs/ampli_noise_time.pdf" :var figsize="wide-normal" :post pdf2svg(file=*this*, ext="png")
+  <<plt-matlab>>
+#+end_src
+
+#+NAME: fig:ampli_noise_time
+#+CAPTION: Output of the amplifier
+#+RESULTS: fig:ampli_noise_time
+[[file:figs/ampli_noise_time.png]]
+
+** Frequency Domain
+We first compute some parameters that will be used for the PSD computation.
+#+begin_src matlab :results none
+  dt = amp_off(2, 2)-amp_off(1, 2);
+
+  Fs = 1/dt; % [Hz]
+
+  win = hanning(ceil(10*Fs));
+#+end_src
+
+Then we compute the Power Spectral Density using =pwelch= function.
+#+begin_src matlab :results none
+  [pxoff, f] = pwelch(amp_off(:,1), win, [], [], Fs);
+  [px20d, ~] = pwelch(amp_20d(:,1), win, [], [], Fs);
+  [px40d, ~] = pwelch(amp_40d(:,1), win, [], [], Fs);
+  [px60d, ~] = pwelch(amp_60d(:,1), win, [], [], Fs);
+#+end_src
+
+We compute the theoretical ADC noise.
+#+begin_src matlab :results none
+  q = 20/2^16; % quantization
+  Sq = q^2/12/1000; % PSD of the ADC noise
+#+end_src
+
+Finally, the ASD is shown on figure [[fig:ampli_noise_psd]].
+#+begin_src matlab :results none :exports none
+  figure;
+  hold on;
+  plot(f, sqrt(pxoff), 'DisplayName', 'OFF');
+  plot(f, sqrt(px20d), 'DisplayName', '20dB');
+  plot(f, sqrt(px40d), 'DisplayName', '40dB');
+  plot(f, sqrt(px60d), 'DisplayName', '60dB');
+  plot([0.1, 500], [sqrt(Sq), sqrt(Sq)], 'k--');
+  hold off;
+  set(gca, 'xscale', 'log');
+  set(gca, 'yscale', 'log');
+  xlabel('Frequency [Hz]'); ylabel('ASD of the measured Voltage $\left[\frac{V}{\sqrt{Hz}}\right]$')
+  legend('Location', 'northeast');
+  xlim([0.1, 500]);
+#+end_src
+
+#+NAME: fig:ampli_noise_psd
+#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
+#+begin_src matlab :var filepath="figs/ampli_noise_psd.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
+  <<plt-matlab>>
+#+end_src
+
+#+NAME: fig:ampli_noise_psd
+#+CAPTION: Amplitude Spectral Density of the measured voltage at the output of the voltage amplifier
+#+RESULTS: fig:ampli_noise_psd
+[[file:figs/ampli_noise_psd.png]]
+
+** Conclusion
+#+begin_important
+ *Questions*:
+  - Where does those sharp peaks comes from? Can this be due to aliasing?
+
+  Noise induced by the voltage amplifiers seems not to be a limiting factor as we have the same noise when they are OFF and ON.
+#+end_important
+
+* Measure of the influence of the AC/DC option on the voltage amplifiers
+  :PROPERTIES:
+  :header-args:matlab+: :tangle matlab/meas_noise_ac_dc.m
+  :header-args:matlab+: :comments org :mkdirp yes
+  :END:
+  <<sec:meas_noise_ac_dc>>
+
+#+begin_src bash :exports none :results none
+  if [ meas_noise_ac_dc.m -nt data/meas_noise_ac_dc.zip ]; then
+    zip data/meas_noise_ac_dc \
+        mat/data_012.mat \
+        mat/data_013.mat \
+        meas_noise_ac_dc.m
+  fi
+#+end_src
+
+#+begin_note
+  All the files (data and Matlab scripts) are accessible [[file:data/meas_noise_ac_dc.zip][here]].
+#+end_note
+
+** Measurement Description
+*Goal*:
+- Measure the influence of the high-pass filter option of the voltage amplifiers
+
+*Setup*:
+- One geophone is located on the marble.
+- It's signal goes to two voltage amplifiers with a gain of 60dB.
+- One voltage amplifier is on the AC option, the other is on the DC option.
+
+*Measurements*:
+First measurement (=mat/data_014.mat= file):
+| Column | Signal                     |
+|--------+----------------------------|
+|      1 | Amplifier 1 with AC option |
+|      2 | Amplifier 2 with DC option |
+|      3 | Time                       |
+
+Second measurement (=mat/data_015.mat= file):
+| Column | Signal                     |
+|--------+----------------------------|
+|      1 | Amplifier 1 with DC option |
+|      2 | Amplifier 2 with AC option |
+|      3 | Time                       |
+
+#+name: fig:volt_amp_setup
+#+caption: Picture of the two voltages amplifiers
+#+attr_html: :width 500px
+[[file:./img/IMG_20190503_170936.jpg]]
+
+** Matlab Init                                              :noexport:ignore:
+#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+  <<matlab-dir>>
+#+end_src
+
+#+begin_src matlab :exports none :results silent :noweb yes
+  <<matlab-init>>
+#+end_src
+
+** Load data
+We load the data of the z axis of two geophones.
+#+begin_src matlab :results none
+  meas14 = load('mat/data_014.mat', 'data'); meas14 = meas14.data;
+  meas15 = load('mat/data_015.mat', 'data'); meas15 = meas15.data;
+#+end_src
+
+** Time Domain
+The signals are shown on figure [[fig:ac_dc_option_time]].
+#+begin_src matlab :results none :exports none
+  figure;
+  hold on;
+  plot(meas14(:, 3), meas14(:, 1), 'DisplayName', 'Amp1 - AC');
+  plot(meas14(:, 3), meas14(:, 2), 'DisplayName', 'Amp2 - DC');
+  plot(meas15(:, 3), meas15(:, 1), 'DisplayName', 'Amp1 - DC');
+  plot(meas15(:, 3), meas15(:, 2), 'DisplayName', 'Amp2 - AC');
+  hold off;
+  legend('Location', 'bestoutside');
+  xlabel('Time [s]');
+  ylabel('Voltage [V]');
+  xlim([0, 100]);
+#+end_src
+
+#+NAME: fig:ac_dc_option_time
+#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
+#+begin_src matlab :var filepath="figs/ac_dc_option_time.pdf" :var figsize="full-normal" :post pdf2svg(file=*this*, ext="png")
+  <<plt-matlab>>
+#+end_src
+
+#+NAME: fig:ac_dc_option_time
+#+CAPTION: Comparison of the signals going through the Voltage amplifiers
+#+RESULTS: fig:ac_dc_option_time
+[[file:figs/ac_dc_option_time.png]]
+
+** Frequency Domain
+We first compute some parameters that will be used for the PSD computation.
+#+begin_src matlab :results none
+  dt = meas14(2, 3)-meas14(1, 3);
+
+  Fs = 1/dt; % [Hz]
+
+  win = hanning(ceil(10*Fs));
+#+end_src
+
+Then we compute the Power Spectral Density using =pwelch= function.
+#+begin_src matlab :results none
+  [pxamp1ac, f] = pwelch(meas14(:, 1), win, [], [], Fs);
+  [pxamp2dc, ~] = pwelch(meas14(:, 2), win, [], [], Fs);
+
+  [pxamp1dc, ~] = pwelch(meas15(:, 1), win, [], [], Fs);
+  [pxamp2ac, ~] = pwelch(meas15(:, 2), win, [], [], Fs);
+#+end_src
+
+The ASD of the signals are compare on figure [[fig:ac_dc_option_asd]].
+#+begin_src matlab :results none :exports none
+  figure;
+  hold on;
+  plot(f, sqrt(pxamp1ac), 'DisplayName', 'Amp1 - AC');
+  plot(f, sqrt(pxamp2dc), 'DisplayName', 'Amp2 - DC');
+  plot(f, sqrt(pxamp1dc), 'DisplayName', 'Amp1 - DC');
+  plot(f, sqrt(pxamp2ac), 'DisplayName', 'Amp2 - AC');
+  hold off;
+  set(gca, 'xscale', 'log');
+  set(gca, 'yscale', 'log');
+  xlabel('Frequency [Hz]'); ylabel('ASD of the measured Voltage $\left[\frac{V}{\sqrt{Hz}}\right]$')
+  legend('Location', 'northeast');
+  xlim([0.1, 500]);
+#+end_src
+
+#+NAME: fig:ac_dc_option_asd
+#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
+#+begin_src matlab :var filepath="figs/ac_dc_option_asd.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
+  <<plt-matlab>>
+#+end_src
+
+#+NAME: fig:ac_dc_option_asd
+#+CAPTION: Amplitude Spectral Density of the measured signals
+#+RESULTS: fig:ac_dc_option_asd
+[[file:figs/ac_dc_option_asd.png]]
+
+** Conclusion
+#+begin_important
+  - The voltage amplifiers include some very sharp high pass filters at 1.5Hz (maybe 4th order)
+  - There is a DC offset on the time domain signal because the DC-offset knob was not set to zero
+#+end_important
+
+* Transfer function of the Low Pass Filter
+  :PROPERTIES:
+  :header-args:matlab+: :tangle matlab/low_pass_filter_measurements.m
+  :header-args:matlab+: :comments org :mkdirp yes
+  :END:
+  <<sec:low_pass_filter_measurements>>
+
+#+begin_src bash :exports none :results none
+  if [ low_pass_filter_measurements.m -nt data/low_pass_filter_measurements.zip ]; then
+    zip data/low_pass_filter_measurements \
+        mat/data_018.mat \
+        mat/data_019.mat \
+        low_pass_filter_measurements.m
+  fi
+#+end_src
+
+The computation files for this section are accessible [[file:data/low_pass_filter_measurements.zip][here]].
+
+** First LPF with a Cut-off frequency of 160Hz
+*** Measurement Description
+*Goal*:
+- Measure the Low Pass Filter Transfer Function
+
+The values of the components are:
+\begin{aligned}
+  R &= 1k\Omega \\
+  C &= 1\mu F
+\end{aligned}
+Which makes a cut-off frequency of $f_c = \frac{1}{RC} = 1000 rad/s = 160Hz$.
+
+#+NAME: fig:lpf
+#+HEADER: :headers '("\\usepackage{tikz}" "\\usepackage{import}" "\\import{$HOME/MEGA/These/LaTeX/}{config.tex}")
+#+HEADER: :imagemagick t :fit yes :iminoptions -scale 100% -density 150 :imoutoptions -quality 100
+#+HEADER: :results raw replace :buffer no :eval no-export :exports both :mkdirp yes
+#+HEADER: :output-dir figs
+#+begin_src latex :file lpf.pdf :post pdf2svg(file=*this*, ext="png") :exports both
+  \begin{tikzpicture}
+    \draw (0,2)
+          to [R=\(R\)] ++(2,0) node[circ]
+          to ++(2,0)
+          ++(-2,0)
+          to [C=\(C\)] ++(0,-2) node[circ]
+          ++(-2,0)
+          to ++(2,0)
+          to ++(2,0)
+  \end{tikzpicture}
+#+end_src
+
+#+NAME: fig:lpf
+#+CAPTION: Schematic of the Low Pass Filter used
+#+RESULTS: fig:lpf
+[[file:figs/lpf.png]]
+
+
+*Setup*:
+- We are measuring the signal from from Geophone with a BNC T
+- On part goes to column 1 through the LPF
+- The other part goes to column 2 without the LPF
+
+*Measurements*:
+=mat/data_018.mat=:
+| Column | Signal               |
+|--------+----------------------|
+|      1 | Amplifier 1 with LPF |
+|      2 | Amplifier 2          |
+|      3 | Time                 |
+
+#+name: fig:lpf_picture
+#+caption: Picture of the low pass filter used
+#+attr_html: :width 500px
+[[file:./img/IMG_20190507_102756.jpg]]
+
+*** Matlab Init                                             :noexport:ignore:
+#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+  <<matlab-dir>>
+#+end_src
+
+#+begin_src matlab :exports none :results silent :noweb yes
+  <<matlab-init>>
+#+end_src
+
+*** Load data
+We load the data of the z axis of two geophones.
+#+begin_src matlab :results none
+  data = load('mat/data_018.mat', 'data'); data = data.data;
+#+end_src
+
+*** Transfer function of the LPF
+We compute the transfer function from the signal without the LPF to the signal measured with the LPF.
+#+begin_src matlab :results none
+  dt = data(2, 3)-data(1, 3);
+
+  Fs = 1/dt; % [Hz]
+
+  win = hanning(ceil(10*Fs));
+#+end_src
+
+#+begin_src matlab :results none
+  [Glpf, f] = tfestimate(data(:, 2), data(:, 1), win, [], [], Fs);
+#+end_src
+
+We compare this transfer function with a transfer function corresponding to an ideal first order LPF with a cut-off frequency of $1000rad/s$.
+We obtain the result on figure [[fig:Glpf_bode]].
+#+begin_src matlab :results none
+  Gth = 1/(1+s/1000)
+#+end_src
+
+#+begin_src matlab :results none
+  figure;
+  ax1 = subplot(2, 1, 1);
+  hold on;
+  plot(f, abs(Glpf));
+  plot(f, abs(squeeze(freqresp(Gth, f, 'Hz'))));
+  hold off;
+  set(gca, 'xscale', 'log'); set(gca, 'yscale', 'log');
+  set(gca, 'XTickLabel',[]);
+  ylabel('Magnitude');
+
+  ax2 = subplot(2, 1, 2);
+  hold on;
+  plot(f, mod(180+180/pi*phase(Glpf), 360)-180);
+  plot(f, 180/pi*unwrap(angle(squeeze(freqresp(Gth, f, 'Hz')))));
+  hold off;
+  set(gca, 'xscale', 'log');
+  ylim([-180, 180]);
+  yticks([-180, -90, 0, 90, 180]);
+  xlabel('Frequency [Hz]'); ylabel('Phase');
+
+  linkaxes([ax1,ax2],'x');
+  xlim([1, 500]);
+#+end_src
+
+#+NAME: fig:Glpf_bode
+#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
+#+begin_src matlab :var filepath="figs/Glpf_bode.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
+  <<plt-matlab>>
+#+end_src
+
+#+NAME: fig:Glpf_bode
+#+CAPTION: Bode Diagram of the measured Low Pass filter and the theoritical one
+#+RESULTS: fig:Glpf_bode
+[[file:figs/Glpf_bode.png]]
+*** Conclusion
+#+begin_important
+  As we want to measure things up to $500Hz$, we chose to change the value of the capacitor to obtain a cut-off frequency of $1kHz$.
+#+end_important
+
+** Second LPF with a Cut-off frequency of 1000Hz
+*** Measurement description
+This time, the value are
+\begin{aligned}
+  R &= 1k\Omega \\
+  C &= 150nF
+\end{aligned}
+Which makes a low pass filter with a cut-off frequency of $f_c = 1060Hz$.
+
+*** Load data
+We load the data of the z axis of two geophones.
+#+begin_src matlab :results none
+  data = load('mat/data_019.mat', 'data'); data = data.data;
+#+end_src
+
+*** Transfer function of the LPF
+We compute the transfer function from the signal without the LPF to the signal measured with the LPF.
+#+begin_src matlab :results none
+  dt = data(2, 3)-data(1, 3);
+
+  Fs = 1/dt; % [Hz]
+
+  win = hanning(ceil(10*Fs));
+#+end_src
+
+#+begin_src matlab :results none
+  [Glpf, f] = tfestimate(data(:, 2), data(:, 1), win, [], [], Fs);
+#+end_src
+
+We compare this transfer function with a transfer function corresponding to an ideal first order LPF with a cut-off frequency of $1060Hz$.
+We obtain the result on figure [[fig:Glpf_bode_bis]].
+#+begin_src matlab :results none
+  Gth = 1/(1+s/1060/2/pi);
+#+end_src
+
+#+begin_src matlab :results none
+  figure;
+  ax1 = subplot(2, 1, 1);
+  hold on;
+  plot(f, abs(Glpf));
+  plot(f, abs(squeeze(freqresp(Gth, f, 'Hz'))));
+  hold off;
+  set(gca, 'xscale', 'log'); set(gca, 'yscale', 'log');
+  set(gca, 'XTickLabel',[]);
+  ylabel('Magnitude');
+
+  ax2 = subplot(2, 1, 2);
+  hold on;
+  plot(f, mod(180+180/pi*phase(Glpf), 360)-180);
+  plot(f, 180/pi*unwrap(angle(squeeze(freqresp(Gth, f, 'Hz')))));
+  hold off;
+  set(gca, 'xscale', 'log');
+  ylim([-180, 180]);
+  yticks([-180, -90, 0, 90, 180]);
+  xlabel('Frequency [Hz]'); ylabel('Phase');
+
+  linkaxes([ax1,ax2],'x');
+  xlim([1, 500]);
+#+end_src
+
+#+NAME: fig:Glpf_bode_bis
+#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
+#+begin_src matlab :var filepath="figs/Glpf_bode_bis.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
+  <<plt-matlab>>
+#+end_src
+
+#+NAME: fig:Glpf_bode_bis
+#+CAPTION: Bode Diagram of the measured Low Pass filter and the theoritical one
+#+RESULTS: fig:Glpf_bode_bis
+[[file:figs/Glpf_bode_bis.png]]
+*** Conclusion
+#+begin_important
+  The added LPF has the expected behavior.
+#+end_important

slip-ring-test/analysis.m

@@ -1,11 +0,0 @@
-data1 = load('mat/data_001.mat', 't', 'x1', 'x2');
-data2 = load('mat/data_002.mat', 't', 'x1', 'x2');
-
-figure;
-hold on;
-plot(data1.t, data1.x1-data1.x2);
-plot(data2.t, data2.x1-data2.x2);
-hold off
-xlabel('Time [s]');
-ylabel('Voltage [V]');
-legend({'Slip-ring OFF', 'Slip-ring ON'});

slip-ring-test/figs/.gitignore

@@ -1,3 +0,0 @@
-*.tex
-*.pdf
-*.svg

slip-ring-test/index.org

@@ -1,39 +1,165 @@
-#+TITLE: Measurements
+#+TITLE: Measurements On the Slip-Ring
-:DRAWER:
+#+SETUPFILE: ../config.org
-#+STARTUP: overview
 
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/htmlize.css"/>
+* Effect of the Slip-Ring on the signal
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/readtheorg.css"/>
-#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/zenburn.css"/>
-#+HTML_HEAD: <script type="text/javascript" src="../js/jquery.min.js"></script>
-#+HTML_HEAD: <script type="text/javascript" src="../js/bootstrap.min.js"></script>
-#+HTML_HEAD: <script type="text/javascript" src="../js/jquery.stickytableheaders.min.js"></script>
-#+HTML_HEAD: <script type="text/javascript" src="../js/readtheorg.js"></script>
-
-#+PROPERTY: header-args:matlab  :session *MATLAB*
-#+PROPERTY: header-args:matlab+ :comments org
-#+PROPERTY: header-args:matlab+ :results output
-#+PROPERTY: header-args:matlab+ :exports both
-#+PROPERTY: header-args:matlab+ :eval no-export
-#+PROPERTY: header-args:matlab+ :output-dir figs
-:END:
-
-* Effect of the rotation of the Slip-Ring
   :PROPERTIES:
-  :header-args:matlab+: :tangle meas_effect_sr.m
+  :header-args:matlab+: :tangle matlab/meas_slip_ring_geophone.m
   :header-args:matlab+: :comments org :mkdirp yes
   :END:
+  <<sec:meas_slip_ring_geophone>>
 
 #+begin_src bash :exports none :results none
-  if [ meas_effect_sr.m -nt data/meas_effect_sr.zip ]; then
+  if [ matlab/meas_slip_ring_geophone.m -nt data/meas_slip_ring_geophone.zip ]; then
-    zip data/meas_effect_sr \
+    cp matlab/meas_slip_ring_geophone.m meas_slip_ring_geophone.m;
-        mat/data_001.mat \
+    zip data/meas_slip_ring_geophone \
-        mat/data_002.mat \
+        mat/data_018.mat \
-        meas_effect_sr.m
+        mat/data_019.mat \
+        meas_slip_ring_geophone.m;
+    rm meas_slip_ring_geophone.m;
   fi
 #+end_src
 
-The data and matlab files are accessible [[file:data/meas_effect_sr.zip][here]].
+#+begin_note
+  All the files (data and Matlab scripts) are accessible [[file:data/meas_slip_ring_geophone.zip][here]].
+#+end_note
+
+** Experimental Setup
+Two measurements are made with the control systems of all the stages turned OFF.
+
+One geophone is located on the marble while the other is located at the sample location (figure [[fig:setup_slipring]]).
+
+#+name: fig:setup_slipring
+#+caption: Experimental Setup
+#+attr_html: :width 500px
+[[file:./img/IMG_20190430_112615.jpg]]
+
+The two measurements are:
+| Measurement File | Description                                                      |
+|------------------+------------------------------------------------------------------|
+| =meas_018.mat=   | Signal from the top geophone does not goes through the Slip-ring |
+| =meas_019.mat=   | Signal goes through the Slip-ring (as shown on the figure above) |
+
+Each of the measurement =mat= file contains one =data= array with 3 columns:
+| Column number | Description       |
+|---------------+-------------------|
+|             1 | Geophone - Marble |
+|             2 | Geophone - Sample |
+|             3 | Time              |
+
+** Matlab Init                                              :noexport:ignore:
+#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+  <<matlab-dir>>
+#+end_src
+
+#+begin_src matlab :exports none :results silent :noweb yes
+  <<matlab-init>>
+#+end_src
+
+** Load data
+We load the data of the z axis of two geophones.
+
+#+begin_src matlab :results none
+  d8 = load('mat/data_018.mat', 'data'); d8 = d8.data;
+  d9 = load('mat/data_019.mat', 'data'); d9 = d9.data;
+#+end_src
+
+** Analysis - Time Domain
+First, we compare the time domain signals for the two experiments (figure [[fig:slipring_time]]).
+
+
+#+begin_src matlab :results none
+  figure;
+  hold on;
+  plot(d9(:, 3), d9(:, 2), 'DisplayName', 'Slip-Ring');
+  plot(d8(:, 3), d8(:, 2), 'DisplayName', 'Wire');
+  hold off;
+  xlabel('Time [s]'); ylabel('Voltage [V]');
+  xlim([0, 50]);
+  legend('location', 'northeast');
+#+end_src
+
+#+NAME: fig:slipring_time
+#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
+#+begin_src matlab :var filepath="figs/slipring_time.pdf" :var figsize="wide-tall" :post pdf2svg(file=*this*, ext="png")
+  <<plt-matlab>>
+#+end_src
+
+#+NAME: fig:slipring_time
+#+CAPTION: Effect of the Slip-Ring on the measured signal - Time domain
+#+RESULTS: fig:slipring_time
+[[file:figs/slipring_time.png]]
+
+** Analysis - Frequency Domain
+We then compute the Power Spectral Density of the two signals and we compare them (figure [[fig:slipring_asd]]).
+#+begin_src matlab :results none
+  dt = d8(2, 3) - d8(1, 3);
+  Fs = 1/dt;
+
+  win = hanning(ceil(1*Fs));
+#+end_src
+
+#+begin_src matlab :results none
+  [pxx8, f] = pwelch(d8(:, 2), win, [], [], Fs);
+  [pxx9, ~] = pwelch(d9(:, 2), win, [], [], Fs);
+#+end_src
+
+#+begin_src matlab :results none
+  figure;
+  hold on;
+  plot(f, sqrt(pxx9), 'DisplayName', 'Slip-Ring');
+  plot(f, sqrt(pxx8), 'DisplayName', 'Wire');
+  hold off;
+  set(gca, 'xscale', 'log');
+  set(gca, 'yscale', 'log');
+  xlabel('Frequency [Hz]'); ylabel('Amplitude Spectral Density $\left[\frac{V}{\sqrt{Hz}}\right]$')
+  xlim([1, 500]);
+  legend('Location', 'southwest');
+#+end_src
+
+#+NAME: fig:slipring_asd
+#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
+#+begin_src matlab :var filepath="figs/slipring_asd.pdf" :var figsize="wide-tall" :post pdf2svg(file=*this*, ext="png")
+  <<plt-matlab>>
+#+end_src
+
+#+NAME: fig:slipring_asd
+#+CAPTION: Effect of the Slip-Ring on the measured signal - Frequency domain
+#+RESULTS: fig:slipring_asd
+[[file:figs/slipring_asd.png]]
+
+** Conclusion
+#+begin_important
+- Connecting the geophone through the Slip-Ring seems to induce a lot of noise.
+#+end_important
+
+#+begin_note
+*Remaining questions to answer*:
+- Why is there a sharp peak at 300Hz?
+- Why the use of the Slip-Ring does induce a noise?
+- Can the capacitive/inductive properties of the wires in the Slip-ring does not play well with the geophone? (resonant RLC circuit)
+#+end_note
+
+* Effect of the rotation of the Slip-Ring
+  :PROPERTIES:
+  :header-args:matlab+: :tangle matlab/meas_effect_sr.m
+  :header-args:matlab+: :comments org :mkdirp yes
+  :END:
+  <<sec:meas_effect_sr>>
+
+#+begin_src bash :exports none :results none
+  if [ matlab/meas_effect_sr.m -nt data/meas_effect_sr.zip ]; then
+    cp matlab/meas_effect_sr.m meas_effect_sr.m;
+    zip data/meas_effect_sr \
+        mat/data_001.mat \
+        mat/data_002.mat \
+        meas_effect_sr.m;
+    rm meas_effect_sr.m;
+  fi
+#+end_src
+
+#+begin_note
+  All the files (data and Matlab scripts) are accessible [[file:data/meas_effect_sr.zip][here]].
+#+end_note
 
 ** Measurement Description
 Random Signal is generated by one DAC of the SpeedGoat.
@@ -60,7 +186,11 @@ The goal is to determine is the signal is altered when the spindle is rotating.
 Here, the rotation speed of the Slip-Ring is set to 1rpm.
 
 ** Matlab Init                                              :noexport:ignore:
-#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+  <<matlab-dir>>
+#+end_src
+
+#+begin_src matlab :exports none :results silent :noweb yes
   <<matlab-init>>
 #+end_src
 
@@ -159,159 +289,29 @@ We now look at the difference between the signal directly measured by the ADC an
   - Should the measurement be redone using voltage amplifiers?
   - Use higher rotation speed and measure for longer periods (to have multiple revolutions) ?
 #+end_note
-* Measure of the noise of the Voltage Amplifier
-  :PROPERTIES:
-  :header-args:matlab+: :tangle meas_volt_amp.m
-  :header-args:matlab+: :comments org :mkdirp yes
-  :END:
-
-#+begin_src bash :exports none :results none
-  if [ meas_volt_amp.m -nt data/meas_volt_amp.zip ]; then
-    zip data/meas_volt_amp \
-        mat/data_003.mat \
-        mat/data_004.mat \
-        mat/data_005.mat \
-        mat/data_006.mat \
-        meas_volt_amp.m
-  fi
-#+end_src
-
-The data and matlab files are accessible [[file:data/meas_volt_amp.zip][here]].
-
-** Measurement Description
-*Goal*:
-- Determine the Voltage Amplifier noise
-
-*Setup*:
-- The two inputs (differential) of the voltage amplifier are shunted with 50Ohms
-- The AC/DC option of the Voltage amplifier is on AC
-- The low pass filter is set to 1hHz
-- We measure the output of the voltage amplifier with a 16bits ADC of the Speedgoat
-
-*Measurements*:
-- =data_003=: Ampli OFF
-- =data_004=: Ampli ON set to 20dB
-- =data_005=: Ampli ON set to 40dB
-- =data_006=: Ampli ON set to 60dB
-
-** Matlab Init                                              :noexport:ignore:
-#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
-  <<matlab-init>>
-#+end_src
-
-** Load data
-#+begin_src matlab :results none
-  amp_off = load('mat/data_003.mat', 'data'); amp_off = amp_off.data(:, [1,3]);
-  amp_20d = load('mat/data_004.mat', 'data'); amp_20d = amp_20d.data(:, [1,3]);
-  amp_40d = load('mat/data_005.mat', 'data'); amp_40d = amp_40d.data(:, [1,3]);
-  amp_60d = load('mat/data_006.mat', 'data'); amp_60d = amp_60d.data(:, [1,3]);
-#+end_src
-
-** Time Domain
-The time domain signals are shown on figure [[fig:ampli_noise_time]].
-
-#+begin_src matlab :results none :exports none
-  figure;
-  hold on;
-  plot(amp_off(:, 2), amp_off(:, 1), 'DisplayName', 'OFF');
-  plot(amp_20d(:, 2), amp_20d(:, 1), 'DisplayName', '20dB');
-  plot(amp_40d(:, 2), amp_40d(:, 1), 'DisplayName', '40dB');
-  plot(amp_60d(:, 2), amp_60d(:, 1), 'DisplayName', '60dB');
-  hold off;
-  legend('Location', 'northeast');
-  xlabel('Time [s]');
-  ylabel('Voltage [V]');
-#+end_src
-
-#+NAME: fig:ampli_noise_time
-#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
-#+begin_src matlab :var filepath="figs/ampli_noise_time.pdf" :var figsize="wide-normal" :post pdf2svg(file=*this*, ext="png")
-  <<plt-matlab>>
-#+end_src
-
-#+NAME: fig:ampli_noise_time
-#+CAPTION: Output of the amplifier
-#+RESULTS: fig:ampli_noise_time
-[[file:figs/ampli_noise_time.png]]
-
-** Frequency Domain
-We first compute some parameters that will be used for the PSD computation.
-#+begin_src matlab :results none
-  dt = amp_off(2, 2)-amp_off(1, 2);
-
-  Fs = 1/dt; % [Hz]
-
-  win = hanning(ceil(10*Fs));
-#+end_src
-
-Then we compute the Power Spectral Density using =pwelch= function.
-#+begin_src matlab :results none
-  [pxoff, f] = pwelch(amp_off(:,1), win, [], [], Fs);
-  [px20d, ~] = pwelch(amp_20d(:,1), win, [], [], Fs);
-  [px40d, ~] = pwelch(amp_40d(:,1), win, [], [], Fs);
-  [px60d, ~] = pwelch(amp_60d(:,1), win, [], [], Fs);
-#+end_src
-
-We compute the theoretical ADC noise.
-#+begin_src matlab :results none
-  q = 20/2^16; % quantization
-  Sq = q^2/12/1000; % PSD of the ADC noise
-#+end_src
-
-Finally, the ASD is shown on figure [[fig:ampli_noise_psd]].
-#+begin_src matlab :results none :exports none
-  figure;
-  hold on;
-  plot(f, sqrt(pxoff), 'DisplayName', 'OFF');
-  plot(f, sqrt(px20d), 'DisplayName', '20dB');
-  plot(f, sqrt(px40d), 'DisplayName', '40dB');
-  plot(f, sqrt(px60d), 'DisplayName', '60dB');
-  plot([0.1, 500], [sqrt(Sq), sqrt(Sq)], 'k--');
-  hold off;
-  set(gca, 'xscale', 'log');
-  set(gca, 'yscale', 'log');
-  xlabel('Frequency [Hz]'); ylabel('ASD of the measured Voltage $\left[\frac{V}{\sqrt{Hz}}\right]$')
-  legend('Location', 'northeast');
-  xlim([0.1, 500]);
-#+end_src
-
-#+NAME: fig:ampli_noise_psd
-#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
-#+begin_src matlab :var filepath="figs/ampli_noise_psd.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
-  <<plt-matlab>>
-#+end_src
-
-#+NAME: fig:ampli_noise_psd
-#+CAPTION: Amplitude Spectral Density of the measured voltage at the output of the voltage amplifier
-#+RESULTS: fig:ampli_noise_psd
-[[file:figs/ampli_noise_psd.png]]
-
-** Conclusion
-#+begin_important
- *Questions*:
-  - Where does those sharp peaks comes from? Can this be due to aliasing?
-
-  Noise induced by the voltage amplifiers seems not to be a limiting factor as we have the same noise when they are OFF and ON.
-#+end_important
-
 * Measure of the noise induced by the Slip-Ring
   :PROPERTIES:
-  :header-args:matlab+: :tangle meas_slip_ring.m
+  :header-args:matlab+: :tangle matlab/meas_slip_ring.m
   :header-args:matlab+: :comments org :mkdirp yes
   :END:
+  <<sec:meas_slip_ring>>
 
 #+begin_src bash :exports none :results none
-  if [ meas_slip_ring.m -nt data/meas_slip_ring.zip ]; then
+  if [ matlab/meas_slip_ring.m -nt data/meas_slip_ring.zip ]; then
+    cp matlab/meas_slip_ring.m meas_slip_ring.m;
     zip data/meas_slip_ring \
         mat/data_008.mat \
         mat/data_009.mat \
         mat/data_010.mat \
         mat/data_011.mat \
-        meas_slip_ring.m
+        meas_slip_ring.m;
+    rm meas_slip_ring.m;
   fi
 #+end_src
 
-The data and matlab files are accessible [[file:data/meas_slip_ring.zip][here]].
+#+begin_note
+  All the files (data and Matlab scripts) are accessible [[file:data/meas_slip_ring.zip][here]].
+#+end_note
 
 ** Measurement Description
 *Goal*:
@@ -343,7 +343,11 @@ Second column: Slip-ring measure
 [[file:./img/VID_20190503_161401.gif]]
 
 ** Matlab Init                                              :noexport:ignore:
-#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+  <<matlab-dir>>
+#+end_src
+
+#+begin_src matlab :exports none :results silent :noweb yes
   <<matlab-init>>
 #+end_src
 
@@ -463,22 +467,36 @@ And we plot the ASD of the measured signals (figure [[fig:sr_psd_compare]]);
 
 * Measure of the noise induced by the slip ring when using a geophone
   :PROPERTIES:
-  :header-args:matlab+: :tangle meas_sr_geophone.m
+  :header-args:matlab+: :tangle matlab/meas_sr_geophone.m
   :header-args:matlab+: :comments org :mkdirp yes
   :END:
+  <<sec:meas_sr_geophone>>
 
 #+begin_src bash :exports none :results none
-  if [ meas_sr_geophone.m -nt data/meas_sr_geophone.zip ]; then
+  if [ matlab/meas_sr_geophone.m -nt data/meas_sr_geophone.zip ]; then
+    cp matlab/meas_sr_geophone.m meas_sr_geophone.m;
     zip data/meas_sr_geophone \
         mat/data_012.mat \
         mat/data_013.mat \
         mat/data_016.mat \
         mat/data_017.mat \
-        meas_sr_geophone.m
+        meas_sr_geophone.m;
+    rm meas_sr_geophone.m;
   fi
 #+end_src
 
-The data and matlab files are accessible [[file:data/meas_sr_geophone.zip][here]].
+#+begin_note
+  All the files (data and Matlab scripts) are accessible [[file:data/meas_sr_geophone.zip][here]].
+#+end_note
+
+** Matlab Init                                              :noexport:ignore:
+#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
+  <<matlab-dir>>
+#+end_src
+
+#+begin_src matlab :exports none :results silent :noweb yes
+  <<matlab-init>>
+#+end_src
 
 ** First Measurement without LPF
 *** Measurement Description
@@ -502,11 +520,6 @@ Second column: Slip-ring measure
 - =data_012=: Slip-Ring OFF
 - =data_013=: Slip-Ring ON
 
-*** Matlab Init                                             :noexport:ignore:
-#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
-  <<matlab-init>>
-#+end_src
-
 *** Load data
 We load the data of the z axis of two geophones.
 #+begin_src matlab :results none
@@ -825,357 +838,3 @@ Finally, we compare the Amplitude Spectral Density of the signals (figure [[fig:
   - Using the LPF, we don't have any perturbation coming from the slip-ring when it is on.
   - However, we should use a smaller value of the capacitor to have a cut-off frequency at $1kHz$.
 #+end_important
-
-* Measure of the influence of the AC/DC option on the voltage amplifiers
-  :PROPERTIES:
-  :header-args:matlab+: :tangle meas_noise_ac_dc.m
-  :header-args:matlab+: :comments org :mkdirp yes
-  :END:
-
-#+begin_src bash :exports none :results none
-  if [ meas_noise_ac_dc.m -nt data/meas_noise_ac_dc.zip ]; then
-    zip data/meas_noise_ac_dc \
-        mat/data_012.mat \
-        mat/data_013.mat \
-        meas_noise_ac_dc.m
-  fi
-#+end_src
-
-The data and matlab files are accessible [[file:data/meas_noise_ac_dc.zip][here]].
-
-** Measurement Description
-*Goal*:
-- Measure the influence of the high-pass filter option of the voltage amplifiers
-
-*Setup*:
-- One geophone is located on the marble.
-- It's signal goes to two voltage amplifiers with a gain of 60dB.
-- One voltage amplifier is on the AC option, the other is on the DC option.
-
-*Measurements*:
-First measurement (=mat/data_014.mat= file):
-| Column | Signal                     |
-|--------+----------------------------|
-|      1 | Amplifier 1 with AC option |
-|      2 | Amplifier 2 with DC option |
-|      3 | Time                       |
-
-Second measurement (=mat/data_015.mat= file):
-| Column | Signal                     |
-|--------+----------------------------|
-|      1 | Amplifier 1 with DC option |
-|      2 | Amplifier 2 with AC option |
-|      3 | Time                       |
-
-#+name: fig:volt_amp_setup
-#+caption: Picture of the two voltages amplifiers
-#+attr_html: :width 500px
-[[file:./img/IMG_20190503_170936.jpg]]
-
-** Matlab Init                                              :noexport:ignore:
-#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
-  <<matlab-init>>
-#+end_src
-
-** Load data
-We load the data of the z axis of two geophones.
-#+begin_src matlab :results none
-  meas14 = load('mat/data_014.mat', 'data'); meas14 = meas14.data;
-  meas15 = load('mat/data_015.mat', 'data'); meas15 = meas15.data;
-#+end_src
-
-** Time Domain
-The signals are shown on figure [[fig:ac_dc_option_time]].
-#+begin_src matlab :results none :exports none
-  figure;
-  hold on;
-  plot(meas14(:, 3), meas14(:, 1), 'DisplayName', 'Amp1 - AC');
-  plot(meas14(:, 3), meas14(:, 2), 'DisplayName', 'Amp2 - DC');
-  plot(meas15(:, 3), meas15(:, 1), 'DisplayName', 'Amp1 - DC');
-  plot(meas15(:, 3), meas15(:, 2), 'DisplayName', 'Amp2 - AC');
-  hold off;
-  legend('Location', 'bestoutside');
-  xlabel('Time [s]');
-  ylabel('Voltage [V]');
-  xlim([0, 100]);
-#+end_src
-
-#+NAME: fig:ac_dc_option_time
-#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
-#+begin_src matlab :var filepath="figs/ac_dc_option_time.pdf" :var figsize="full-normal" :post pdf2svg(file=*this*, ext="png")
-  <<plt-matlab>>
-#+end_src
-
-#+NAME: fig:ac_dc_option_time
-#+CAPTION: Comparison of the signals going through the Voltage amplifiers
-#+RESULTS: fig:ac_dc_option_time
-[[file:figs/ac_dc_option_time.png]]
-
-** Frequency Domain
-We first compute some parameters that will be used for the PSD computation.
-#+begin_src matlab :results none
-  dt = meas14(2, 3)-meas14(1, 3);
-
-  Fs = 1/dt; % [Hz]
-
-  win = hanning(ceil(10*Fs));
-#+end_src
-
-Then we compute the Power Spectral Density using =pwelch= function.
-#+begin_src matlab :results none
-  [pxamp1ac, f] = pwelch(meas14(:, 1), win, [], [], Fs);
-  [pxamp2dc, ~] = pwelch(meas14(:, 2), win, [], [], Fs);
-
-  [pxamp1dc, ~] = pwelch(meas15(:, 1), win, [], [], Fs);
-  [pxamp2ac, ~] = pwelch(meas15(:, 2), win, [], [], Fs);
-#+end_src
-
-The ASD of the signals are compare on figure [[fig:ac_dc_option_asd]].
-#+begin_src matlab :results none :exports none
-  figure;
-  hold on;
-  plot(f, sqrt(pxamp1ac), 'DisplayName', 'Amp1 - AC');
-  plot(f, sqrt(pxamp2dc), 'DisplayName', 'Amp2 - DC');
-  plot(f, sqrt(pxamp1dc), 'DisplayName', 'Amp1 - DC');
-  plot(f, sqrt(pxamp2ac), 'DisplayName', 'Amp2 - AC');
-  hold off;
-  set(gca, 'xscale', 'log');
-  set(gca, 'yscale', 'log');
-  xlabel('Frequency [Hz]'); ylabel('ASD of the measured Voltage $\left[\frac{V}{\sqrt{Hz}}\right]$')
-  legend('Location', 'northeast');
-  xlim([0.1, 500]);
-#+end_src
-
-#+NAME: fig:ac_dc_option_asd
-#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
-#+begin_src matlab :var filepath="figs/ac_dc_option_asd.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
-  <<plt-matlab>>
-#+end_src
-
-#+NAME: fig:ac_dc_option_asd
-#+CAPTION: Amplitude Spectral Density of the measured signals
-#+RESULTS: fig:ac_dc_option_asd
-[[file:figs/ac_dc_option_asd.png]]
-
-** Conclusion
-#+begin_important
-  - The voltage amplifiers include some very sharp high pass filters at 1.5Hz (maybe 4th order)
-  - There is a DC offset on the time domain signal because the DC-offset knob was not set to zero
-#+end_important
-
-* Transfer function of the Low Pass Filter
-  :PROPERTIES:
-  :header-args:matlab+: :tangle low_pass_filter_measurements.m
-  :header-args:matlab+: :comments org :mkdirp yes
-  :END:
-
-#+begin_src bash :exports none :results none
-  if [ low_pass_filter_measurements.m -nt data/low_pass_filter_measurements.zip ]; then
-    zip data/low_pass_filter_measurements \
-        mat/data_018.mat \
-        mat/data_019.mat \
-        low_pass_filter_measurements.m
-  fi
-#+end_src
-
-The computation files for this section are accessible [[file:data/low_pass_filter_measurements.zip][here]].
-
-** First LPF with a Cut-off frequency of 160Hz
-*** Measurement Description
-*Goal*:
-- Measure the Low Pass Filter Transfer Function
-
-The values of the components are:
-\begin{aligned}
-  R &= 1k\Omega \\
-  C &= 1\mu F
-\end{aligned}
-Which makes a cut-off frequency of $f_c = \frac{1}{RC} = 1000 rad/s = 160Hz$.
-
-#+NAME: fig:lpf
-#+HEADER: :headers '("\\usepackage{tikz}" "\\usepackage{import}" "\\import{$HOME/MEGA/These/LaTeX/}{config.tex}")
-#+HEADER: :imagemagick t :fit yes :iminoptions -scale 100% -density 150 :imoutoptions -quality 100
-#+HEADER: :results raw replace :buffer no :eval no-export :exports both :mkdirp yes
-#+HEADER: :output-dir figs
-#+begin_src latex :file lpf.pdf :post pdf2svg(file=*this*, ext="png") :exports both
-  \begin{tikzpicture}
-    \draw (0,2)
-          to [R=\(R\)] ++(2,0) node[circ]
-          to ++(2,0)
-          ++(-2,0)
-          to [C=\(C\)] ++(0,-2) node[circ]
-          ++(-2,0)
-          to ++(2,0)
-          to ++(2,0)
-  \end{tikzpicture}
-#+end_src
-
-#+NAME: fig:lpf
-#+CAPTION: Schematic of the Low Pass Filter used
-#+RESULTS: fig:lpf
-[[file:figs/lpf.png]]
-
-
-*Setup*:
-- We are measuring the signal from from Geophone with a BNC T
-- On part goes to column 1 through the LPF
-- The other part goes to column 2 without the LPF
-
-*Measurements*:
-=mat/data_018.mat=:
-| Column | Signal               |
-|--------+----------------------|
-|      1 | Amplifier 1 with LPF |
-|      2 | Amplifier 2          |
-|      3 | Time                 |
-
-#+name: fig:lpf_picture
-#+caption: Picture of the low pass filter used
-#+attr_html: :width 500px
-[[file:./img/IMG_20190507_102756.jpg]]
-
-*** Matlab Init                                             :noexport:ignore:
-#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
-  <<matlab-init>>
-#+end_src
-
-*** Load data
-We load the data of the z axis of two geophones.
-#+begin_src matlab :results none
-  data = load('mat/data_018.mat', 'data'); data = data.data;
-#+end_src
-
-*** Transfer function of the LPF
-We compute the transfer function from the signal without the LPF to the signal measured with the LPF.
-#+begin_src matlab :results none
-  dt = data(2, 3)-data(1, 3);
-
-  Fs = 1/dt; % [Hz]
-
-  win = hanning(ceil(10*Fs));
-#+end_src
-
-#+begin_src matlab :results none
-  [Glpf, f] = tfestimate(data(:, 2), data(:, 1), win, [], [], Fs);
-#+end_src
-
-We compare this transfer function with a transfer function corresponding to an ideal first order LPF with a cut-off frequency of $1000rad/s$.
-We obtain the result on figure [[fig:Glpf_bode]].
-#+begin_src matlab :results none
-  Gth = 1/(1+s/1000)
-#+end_src
-
-#+begin_src matlab :results none
-  figure;
-  ax1 = subplot(2, 1, 1);
-  hold on;
-  plot(f, abs(Glpf));
-  plot(f, abs(squeeze(freqresp(Gth, f, 'Hz'))));
-  hold off;
-  set(gca, 'xscale', 'log'); set(gca, 'yscale', 'log');
-  set(gca, 'XTickLabel',[]);
-  ylabel('Magnitude');
-
-  ax2 = subplot(2, 1, 2);
-  hold on;
-  plot(f, mod(180+180/pi*phase(Glpf), 360)-180);
-  plot(f, 180/pi*unwrap(angle(squeeze(freqresp(Gth, f, 'Hz')))));
-  hold off;
-  set(gca, 'xscale', 'log');
-  ylim([-180, 180]);
-  yticks([-180, -90, 0, 90, 180]);
-  xlabel('Frequency [Hz]'); ylabel('Phase');
-
-  linkaxes([ax1,ax2],'x');
-  xlim([1, 500]);
-#+end_src
-
-#+NAME: fig:Glpf_bode
-#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
-#+begin_src matlab :var filepath="figs/Glpf_bode.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
-  <<plt-matlab>>
-#+end_src
-
-#+NAME: fig:Glpf_bode
-#+CAPTION: Bode Diagram of the measured Low Pass filter and the theoritical one
-#+RESULTS: fig:Glpf_bode
-[[file:figs/Glpf_bode.png]]
-*** Conclusion
-#+begin_important
-  As we want to measure things up to $500Hz$, we chose to change the value of the capacitor to obtain a cut-off frequency of $1kHz$.
-#+end_important
-
-** Second LPF with a Cut-off frequency of 1000Hz
-*** Measurement description
-This time, the value are
-\begin{aligned}
-  R &= 1k\Omega \\
-  C &= 150nF
-\end{aligned}
-Which makes a low pass filter with a cut-off frequency of $f_c = 1060Hz$.
-
-*** Load data
-We load the data of the z axis of two geophones.
-#+begin_src matlab :results none
-  data = load('mat/data_019.mat', 'data'); data = data.data;
-#+end_src
-
-*** Transfer function of the LPF
-We compute the transfer function from the signal without the LPF to the signal measured with the LPF.
-#+begin_src matlab :results none
-  dt = data(2, 3)-data(1, 3);
-
-  Fs = 1/dt; % [Hz]
-
-  win = hanning(ceil(10*Fs));
-#+end_src
-
-#+begin_src matlab :results none
-  [Glpf, f] = tfestimate(data(:, 2), data(:, 1), win, [], [], Fs);
-#+end_src
-
-We compare this transfer function with a transfer function corresponding to an ideal first order LPF with a cut-off frequency of $1060Hz$.
-We obtain the result on figure [[fig:Glpf_bode_bis]].
-#+begin_src matlab :results none
-  Gth = 1/(1+s/1060/2/pi);
-#+end_src
-
-#+begin_src matlab :results none
-  figure;
-  ax1 = subplot(2, 1, 1);
-  hold on;
-  plot(f, abs(Glpf));
-  plot(f, abs(squeeze(freqresp(Gth, f, 'Hz'))));
-  hold off;
-  set(gca, 'xscale', 'log'); set(gca, 'yscale', 'log');
-  set(gca, 'XTickLabel',[]);
-  ylabel('Magnitude');
-
-  ax2 = subplot(2, 1, 2);
-  hold on;
-  plot(f, mod(180+180/pi*phase(Glpf), 360)-180);
-  plot(f, 180/pi*unwrap(angle(squeeze(freqresp(Gth, f, 'Hz')))));
-  hold off;
-  set(gca, 'xscale', 'log');
-  ylim([-180, 180]);
-  yticks([-180, -90, 0, 90, 180]);
-  xlabel('Frequency [Hz]'); ylabel('Phase');
-
-  linkaxes([ax1,ax2],'x');
-  xlim([1, 500]);
-#+end_src
-
-#+NAME: fig:Glpf_bode_bis
-#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
-#+begin_src matlab :var filepath="figs/Glpf_bode_bis.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
-  <<plt-matlab>>
-#+end_src
-
-#+NAME: fig:Glpf_bode_bis
-#+CAPTION: Bode Diagram of the measured Low Pass filter and the theoritical one
-#+RESULTS: fig:Glpf_bode_bis
-[[file:figs/Glpf_bode_bis.png]]
-*** Conclusion
-#+begin_important
-  The added LPF has the expected behavior.
-#+end_important

slip-ring-test/low_pass_filter_measurements.m

@@ -1,101 +0,0 @@
-% Matlab Init                                             :noexport:ignore:
-
-clear; close all; clc;
-
-%% Intialize Laplace variable
-s = zpk('s');
-
-%% Initialize ans with org-babel
-ans = 0;
-
-% Load data
-% We load the data of the z axis of two geophones.
-
-data = load('mat/data_018.mat', 'data'); data = data.data;
-
-% Transfer function of the LPF
-% We compute the transfer function from the signal without the LPF to the signal measured with the LPF.
-
-dt = data(2, 3)-data(1, 3);
-
-Fs = 1/dt; % [Hz]
-
-win = hanning(ceil(10*Fs));
-
-[Glpf, f] = tfestimate(data(:, 2), data(:, 1), win, [], [], Fs);
-
-
-
-% We compare this transfer function with a transfer function corresponding to an ideal first order LPF with a cut-off frequency of $1000rad/s$.
-% We obtain the result on figure [[fig:Glpf_bode]].
-
-Gth = 1/(1+s/1000)
-
-figure;
-ax1 = subplot(2, 1, 1);
-hold on;
-plot(f, abs(Glpf));
-plot(f, abs(squeeze(freqresp(Gth, f, 'Hz'))));
-hold off;
-set(gca, 'xscale', 'log'); set(gca, 'yscale', 'log');
-set(gca, 'XTickLabel',[]);
-ylabel('Magnitude');
-
-ax2 = subplot(2, 1, 2);
-hold on;
-plot(f, mod(180+180/pi*phase(Glpf), 360)-180);
-plot(f, 180/pi*unwrap(angle(squeeze(freqresp(Gth, f, 'Hz')))));
-hold off;
-set(gca, 'xscale', 'log');
-ylim([-180, 180]);
-yticks([-180, -90, 0, 90, 180]);
-xlabel('Frequency [Hz]'); ylabel('Phase');
-
-linkaxes([ax1,ax2],'x');
-xlim([1, 500]);
-
-% Load data
-% We load the data of the z axis of two geophones.
-
-data = load('mat/data_019.mat', 'data'); data = data.data;
-
-% Transfer function of the LPF
-% We compute the transfer function from the signal without the LPF to the signal measured with the LPF.
-
-dt = data(2, 3)-data(1, 3);
-
-Fs = 1/dt; % [Hz]
-
-win = hanning(ceil(10*Fs));
-
-[Glpf, f] = tfestimate(data(:, 2), data(:, 1), win, [], [], Fs);
-
-
-
-% We compare this transfer function with a transfer function corresponding to an ideal first order LPF with a cut-off frequency of $1060Hz$.
-% We obtain the result on figure [[fig:Glpf_bode_bis]].
-
-Gth = 1/(1+s/1060/2/pi);
-
-figure;
-ax1 = subplot(2, 1, 1);
-hold on;
-plot(f, abs(Glpf));
-plot(f, abs(squeeze(freqresp(Gth, f, 'Hz'))));
-hold off;
-set(gca, 'xscale', 'log'); set(gca, 'yscale', 'log');
-set(gca, 'XTickLabel',[]);
-ylabel('Magnitude');
-
-ax2 = subplot(2, 1, 2);
-hold on;
-plot(f, mod(180+180/pi*phase(Glpf), 360)-180);
-plot(f, 180/pi*unwrap(angle(squeeze(freqresp(Gth, f, 'Hz')))));
-hold off;
-set(gca, 'xscale', 'log');
-ylim([-180, 180]);
-yticks([-180, -90, 0, 90, 180]);
-xlabel('Frequency [Hz]'); ylabel('Phase');
-
-linkaxes([ax1,ax2],'x');
-xlim([1, 500]);

slip-ring-test/matlab/meas_effect_sr.m

@@ -1,13 +1,12 @@
 % Matlab Init                                              :noexport:ignore:
 
+current_dir='/home/thomas/MEGA/These/meas/slip-ring-test/';
+%% Clear Workspace and Close figures
 clear; close all; clc;
 
 %% Intialize Laplace variable
 s = zpk('s');
 
-%% Initialize ans with org-babel
-ans = 0;
-
 % Load data
 % We load the data of the z axis of two geophones.
 

slip-ring-test/matlab/meas_slip_ring.m

@@ -1,13 +1,12 @@
 % Matlab Init                                              :noexport:ignore:
 
+current_dir='/home/thomas/MEGA/These/meas/slip-ring-test/';
+%% Clear Workspace and Close figures
 clear; close all; clc;
 
 %% Intialize Laplace variable
 s = zpk('s');
 
-%% Initialize ans with org-babel
-ans = 0;
-
 % Load data
 % We load the data of the z axis of two geophones.
 

slip-ring-test/matlab/meas_slip_ring_geophone.m

@@ -0,0 +1,57 @@
+% Matlab Init                                              :noexport:ignore:
+
+current_dir='/home/thomas/MEGA/These/meas/slip-ring-test/';
+%% Go to current Directory
+cd(current_dir);
+
+%% Initialize ans with org-babel
+ans = 0;
+
+%% Clear Workspace and Close figures
+clear; close all; clc;
+
+%% Intialize Laplace variable
+s = zpk('s');
+
+% Load data
+% We load the data of the z axis of two geophones.
+
+
+d8 = load('mat/data_018.mat', 'data'); d8 = d8.data;
+d9 = load('mat/data_019.mat', 'data'); d9 = d9.data;
+
+% Analysis - Time Domain
+% First, we compare the time domain signals for the two experiments (figure [[fig:slipring_time]]).
+
+
+
+figure;
+hold on;
+plot(d9(:, 3), d9(:, 2), 'DisplayName', 'Slip-Ring');
+plot(d8(:, 3), d8(:, 2), 'DisplayName', 'Wire');
+hold off;
+xlabel('Time [s]'); ylabel('Voltage [V]');
+xlim([0, 50]);
+legend('location', 'northeast');
+
+% Analysis - Frequency Domain
+% We then compute the Power Spectral Density of the two signals and we compare them (figure [[fig:slipring_asd]]).
+
+dt = d8(2, 3) - d8(1, 3);
+Fs = 1/dt;
+
+win = hanning(ceil(1*Fs));
+
+[pxx8, f] = pwelch(d8(:, 2), win, [], [], Fs);
+[pxx9, ~] = pwelch(d9(:, 2), win, [], [], Fs);
+
+figure;
+hold on;
+plot(f, sqrt(pxx9), 'DisplayName', 'Slip-Ring');
+plot(f, sqrt(pxx8), 'DisplayName', 'Wire');
+hold off;
+set(gca, 'xscale', 'log');
+set(gca, 'yscale', 'log');
+xlabel('Frequency [Hz]'); ylabel('Amplitude Spectral Density $\left[\frac{V}{\sqrt{Hz}}\right]$')
+xlim([1, 500]);
+legend('Location', 'southwest');

slip-ring-test/matlab/meas_sr_geophone.m

@@ -1,13 +1,12 @@
 % Matlab Init                                              :noexport:ignore:
 
+current_dir='/home/thomas/MEGA/These/meas/slip-ring-test/';
+%% Clear Workspace and Close figures
 clear; close all; clc;
 
 %% Intialize Laplace variable
 s = zpk('s');
 
-%% Initialize ans with org-babel
-ans = 0;
-
 % Load data
 % We load the data of the z axis of two geophones.
 

slip-ring-test/meas_noise_ac_dc.m

@@ -1,66 +0,0 @@
-% Matlab Init                                              :noexport:ignore:
-
-clear; close all; clc;
-
-%% Intialize Laplace variable
-s = zpk('s');
-
-%% Initialize ans with org-babel
-ans = 0;
-
-% Load data
-% We load the data of the z axis of two geophones.
-
-meas14 = load('mat/data_014.mat', 'data'); meas14 = meas14.data;
-meas15 = load('mat/data_015.mat', 'data'); meas15 = meas15.data;
-
-% Time Domain
-% The signals are shown on figure [[fig:ac_dc_option_time]].
-
-figure;
-hold on;
-plot(meas14(:, 3), meas14(:, 1), 'DisplayName', 'Amp1 - AC');
-plot(meas14(:, 3), meas14(:, 2), 'DisplayName', 'Amp2 - DC');
-plot(meas15(:, 3), meas15(:, 1), 'DisplayName', 'Amp1 - DC');
-plot(meas15(:, 3), meas15(:, 2), 'DisplayName', 'Amp2 - AC');
-hold off;
-legend('Location', 'bestoutside');
-xlabel('Time [s]');
-ylabel('Voltage [V]');
-xlim([0, 100]);
-
-% Frequency Domain
-% We first compute some parameters that will be used for the PSD computation.
-
-dt = meas14(2, 3)-meas14(1, 3);
-
-Fs = 1/dt; % [Hz]
-
-win = hanning(ceil(10*Fs));
-
-
-
-% Then we compute the Power Spectral Density using =pwelch= function.
-
-[pxamp1ac, f] = pwelch(meas14(:, 1), win, [], [], Fs);
-[pxamp2dc, ~] = pwelch(meas14(:, 2), win, [], [], Fs);
-
-[pxamp1dc, ~] = pwelch(meas15(:, 1), win, [], [], Fs);
-[pxamp2ac, ~] = pwelch(meas15(:, 2), win, [], [], Fs);
-
-
-
-% The ASD of the signals are compare on figure [[fig:ac_dc_option_asd]].
-
-figure;
-hold on;
-plot(f, sqrt(pxamp1ac), 'DisplayName', 'Amp1 - AC');
-plot(f, sqrt(pxamp2dc), 'DisplayName', 'Amp2 - DC');
-plot(f, sqrt(pxamp1dc), 'DisplayName', 'Amp1 - DC');
-plot(f, sqrt(pxamp2ac), 'DisplayName', 'Amp2 - AC');
-hold off;
-set(gca, 'xscale', 'log');
-set(gca, 'yscale', 'log');
-xlabel('Frequency [Hz]'); ylabel('ASD of the measured Voltage $\left[\frac{V}{\sqrt{Hz}}\right]$')
-legend('Location', 'northeast');
-xlim([0.1, 500]);

slip-ring-test/meas_volt_amp.m

@@ -1,74 +0,0 @@
-% Matlab Init                                              :noexport:ignore:
-
-clear; close all; clc;
-
-%% Intialize Laplace variable
-s = zpk('s');
-
-%% Initialize ans with org-babel
-ans = 0;
-
-% Load data
-
-amp_off = load('mat/data_003.mat', 'data'); amp_off = amp_off.data(:, [1,3]);
-amp_20d = load('mat/data_004.mat', 'data'); amp_20d = amp_20d.data(:, [1,3]);
-amp_40d = load('mat/data_005.mat', 'data'); amp_40d = amp_40d.data(:, [1,3]);
-amp_60d = load('mat/data_006.mat', 'data'); amp_60d = amp_60d.data(:, [1,3]);
-
-% Time Domain
-% The time domain signals are shown on figure [[fig:ampli_noise_time]].
-
-
-figure;
-hold on;
-plot(amp_off(:, 2), amp_off(:, 1), 'DisplayName', 'OFF');
-plot(amp_20d(:, 2), amp_20d(:, 1), 'DisplayName', '20dB');
-plot(amp_40d(:, 2), amp_40d(:, 1), 'DisplayName', '40dB');
-plot(amp_60d(:, 2), amp_60d(:, 1), 'DisplayName', '60dB');
-hold off;
-legend('Location', 'northeast');
-xlabel('Time [s]');
-ylabel('Voltage [V]');
-
-% Frequency Domain
-% We first compute some parameters that will be used for the PSD computation.
-
-dt = amp_off(2, 2)-amp_off(1, 2);
-
-Fs = 1/dt; % [Hz]
-
-win = hanning(ceil(10*Fs));
-
-
-
-% Then we compute the Power Spectral Density using =pwelch= function.
-
-[pxoff, f] = pwelch(amp_off(:,1), win, [], [], Fs);
-[px20d, ~] = pwelch(amp_20d(:,1), win, [], [], Fs);
-[px40d, ~] = pwelch(amp_40d(:,1), win, [], [], Fs);
-[px60d, ~] = pwelch(amp_60d(:,1), win, [], [], Fs);
-
-
-
-% We compute the theoretical ADC noise.
-
-q = 20/2^16; % quantization
-Sq = q^2/12/1000; % PSD of the ADC noise
-
-
-
-% Finally, the ASD is shown on figure [[fig:ampli_noise_psd]].
-
-figure;
-hold on;
-plot(f, sqrt(pxoff), 'DisplayName', 'OFF');
-plot(f, sqrt(px20d), 'DisplayName', '20dB');
-plot(f, sqrt(px40d), 'DisplayName', '40dB');
-plot(f, sqrt(px60d), 'DisplayName', '60dB');
-plot([0.1, 500], [sqrt(Sq), sqrt(Sq)], 'k--');
-hold off;
-set(gca, 'xscale', 'log');
-set(gca, 'yscale', 'log');
-xlabel('Frequency [Hz]'); ylabel('ASD of the measured Voltage $\left[\frac{V}{\sqrt{Hz}}\right]$')
-legend('Location', 'northeast');
-xlim([0.1, 500]);

slip-ring-test/run_test.m

@@ -1,54 +0,0 @@
-%%
-Tsim = 100; % [s]
-
-%%
-tg = slrt;
-
-%% TODO - Build this application if updated
-
-%%
-if tg.Connected == "Yes"
-    if tg.Status == "running"
-        disp('Target is Running, Stopping...');
-        tg.stop;
-        while tg.Status == "running"
-            pause(1);
-        end
-        disp('Target is Stopped');
-    end
-    if tg.Status == "stopped"
-        disp('Load the Application');
-        tg.load('slip_ring_test');
-
-        %% Run the application
-        disp('Starting the Application');
-        tg.start;
-        pause(Tsim);
-        tg.stop;
-    end
-else
-    error("The target computer is not connected");
-end
-
-%%
-f = SimulinkRealTime.openFTP(tg);
-cd(f, 'data/slip_ring_test/');
-mget(f, 'data_001.dat', 'data');
-close(f);
-
-%%
-data = SimulinkRealTime.utils.getFileScopeData('data/data_001.dat').data;
-
-%%
-n = 19;
-
-while isfile(['mat/data_', num2str(n, '%03d'), '.mat'])
-     disp('File exists.');
-     if input(['Are you sure you want to override the file ', 'mat/data_', ...
-            num2str(n, '%03d'), '.mat', ' ? [Y/n]']) == 'Y'
-         break;
-     end
-     n = input('What should be the measurement number?');
-end
-
-save(['mat/data_', num2str(n, '%03d'), '.mat'], 'data');

slip-ring-test/setup.m

@@ -1,7 +0,0 @@
-
-%%
-% tg = slrt;
-% f = SimulinkRealTime.openFTP(tg);
-% cd(f, 'data/');
-% mkdir(f, 'disturbance-measurement');
-% close(f);

speedgoat-measurement/readme.org

@@ -78,9 +78,3 @@ Then, the =f= object can be used to access the filesystem on the target computer
 
 * ELMO
 tutorials: https://www.elmomc.com/products/application-studio/easii/easii-tutorials/
-* Low Pass Filter
-
-R = 1KOhm
-C = 1muF
-
-Fc = 1kHz