many updates

slip-ring-noise-turning/img/nohup.out

@@ -1,3 +0,0 @@
-invalid color string: rgba(50, 48, 47)
-
-(termite:25037): GLib-WARNING **: 14:10:26.520: GChildWatchSource: Exit status of a child process was requested but ECHILD was received by waitpid(). See the documentation of g_child_watch_source_new() for possible causes.

slip-ring-noise-turning/readme.org

@@ -1,5 +1,5 @@
 * DONE Measure of the noise of the Voltage Amplifier
-  CLOSED: [2019-05-06 lun. 09:00]
+CLOSED: [2019-05-06 lun. 09:00]
 - The two inputs (differential) of the voltage amplifier are shunted with 50Ohms
 - The AC/DC option of the Voltage amplifier is on AC
 - The low pass filter is set to 1hHz
@@ -13,7 +13,7 @@ meas6: Ampli ON 60dB
 meas7: Ampli ON 80dB
 
 * DONE Measure of the noise induced by the Slip-Ring
-  CLOSED: [2019-05-06 lun. 09:28]
+CLOSED: [2019-05-06 lun. 09:28]
 Setup:
 - 0V is generated by the DAC of the Speedgoat
 - Using a T, one part goes to ADC
@@ -33,7 +33,7 @@ Measurements:
 - meas11: Slip-Ring ON and omega=60rpm
 
 * DONE Measure of the noise induced by the slip ring when using a geophone
-  CLOSED: [2019-05-06 lun. 09:28]
+CLOSED: [2019-05-06 lun. 09:28]
 The geophone is located at the sample location
 The two Voltage amplifiers have the following settings:
 - AC
@@ -58,7 +58,7 @@ Redone the measurements with 1kHz additional low pass filter:
 - meas17: Slip-Ring ON
 
 * DONE Measure of the influence of the AC/DC option on the voltage amplifiers
-  CLOSED: [2019-05-06 lun. 09:28]
+CLOSED: [2019-05-06 lun. 09:28]
 One geophone is located on the marble.
 It's signal goes to two voltage amplifiers with a gain of 60dB.
 On voltage amplifier is on the AC option, the other on the DC option.