2019-03-14 16:40:28 +01:00
#+TITLE : Spindle Analysis
2019-05-10 16:06:43 +02:00
#+SETUPFILE : ../config.org
2019-03-15 11:48:56 +01:00
2019-03-19 16:43:47 +01:00
The report made by the PEL is accessible [[file:documents/Spindle_report_test.pdf ][here ]].
2019-03-20 15:21:12 +01:00
* Notes
#+name : fig:setup_spindle
#+caption : Measurement setup at the PEL lab
2019-05-10 16:06:43 +02:00
[[file:./img/setup_spindle.png ]]
2019-03-20 15:21:12 +01:00
2019-03-14 16:40:28 +01:00
* Data Processing
2019-05-10 16:06:43 +02:00
:PROPERTIES:
:header-args:matlab+: :tangle matlab/spindle_data_processing.m
:header-args:matlab+: :comments org :mkdirp yes
:END:
<<sec:spindle_data_processing >>
#+begin_src bash :exports none :results none
if [ matlab/spindle_data_processing.m -nt data/spindle_data_processing.zip ]; then
cp matlab/spindle_data_processing.m spindle_data_processing.m;
zip data/spindle_data_processing \
mat/10turns_1rpm_icepap.txt \
mat/10turns_60rpm_IcepapFIR.txt \
src/getAsynchronousError.m \
spindle_data_processing.m
rm spindle_data_processing.m;
fi
#+end_src
#+begin_note
All the files (data and Matlab scripts) are accessible [[file:data/spindle_data_processing.zip ][here ]].
#+end_note
** Matlab Init :noexport:ignore:
#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
<<matlab-dir >>
#+end_src
#+begin_src matlab :exports none :results silent :noweb yes
2019-03-14 16:40:28 +01:00
<<matlab-init >>
#+end_src
2019-05-10 16:06:43 +02:00
#+begin_src matlab :exports none :results silent :noweb yes
%% Add the getAsynchronousError to path
addpath('./src/ ');
#+end_src
2019-03-14 16:40:28 +01:00
** Load Measurement Data
#+begin_src matlab :results none :exports code
2019-05-10 16:06:43 +02:00
spindle_1rpm_table = readtable('./mat/10turns_1rpm_icepap.txt');
spindle_60rpm_table = readtable('./mat/10turns_60rpm_IcepapFIR.txt');
2019-03-14 16:40:28 +01:00
#+end_src
#+begin_src matlab :results output :exports code
spindle_1rpm_table(1, :)
#+end_src
#+begin_src matlab :results none :exports code
spindle_1rpm = table2array(spindle_1rpm_table);
spindle_60rpm = table2array(spindle_60rpm_table);
#+end_src
** Convert Signals from [deg] to [sec]
#+begin_src matlab :results none :exports code
speed_1rpm = 360/60; % [deg/sec]
spindle_1rpm(:, 1) = spindle_1rpm(:, 2)/speed_1rpm; % From position [deg] to time [s]
speed_60rpm = 360/1; % [deg/sec]
spindle_60rpm(:, 1) = spindle_60rpm(:, 2)/speed_60rpm; % From position [deg] to time [s]
#+end_src
** Convert Signals
#+begin_src matlab :results none :exports code
% scaling = 1/80000; % 80 mV/um
scaling = 1e-6; % [um] to [m]
spindle_1rpm(:, 3:end) = scaling*spindle_1rpm(:, 3:end); % [V] to [m]
spindle_1rpm(:, 3:end) = spindle_1rpm(:, 3:end)-mean(spindle_1rpm(:, 3:end)); % Remove mean
spindle_60rpm(:, 3:end) = scaling*spindle_60rpm(:, 3:end); % [V] to [m]
spindle_60rpm(:, 3:end) = spindle_60rpm(:, 3:end)-mean(spindle_60rpm(:, 3:end)); % Remove mean
#+end_src
** Ts and Fs for both measurements
#+begin_src matlab :results none :exports code
Ts_1rpm = spindle_1rpm(end, 1)/(length(spindle_1rpm(:, 1))-1);
Fs_1rpm = 1/Ts_1rpm;
Ts_60rpm = spindle_60rpm(end, 1)/(length(spindle_60rpm(:, 1))-1);
Fs_60rpm = 1/Ts_60rpm;
#+end_src
2019-05-10 16:06:43 +02:00
** Find Noise of the ADC [$\frac{m}{\sqrt{Hz}}$]
2019-03-14 16:40:28 +01:00
#+begin_src matlab :results none :exports code
data = spindle_1rpm(:, 5);
dV_1rpm = min(abs(data(1) - data(data ~= data(1))));
noise_1rpm = dV_1rpm/sqrt(12*Fs_1rpm/2);
data = spindle_60rpm(:, 5);
dV_60rpm = min(abs(data(50) - data(data ~= data(50))));
noise_60rpm = dV_60rpm/sqrt(12*Fs_60rpm/2);
#+end_src
** Save all the data under spindle struct
#+begin_src matlab :results none :exports code
spindle.rpm1.time = spindle_1rpm(:, 1);
spindle.rpm1.deg = spindle_1rpm(:, 2);
spindle.rpm1.Ts = Ts_1rpm;
spindle.rpm1.Fs = 1/Ts_1rpm;
spindle.rpm1.x = spindle_1rpm(:, 3);
spindle.rpm1.y = spindle_1rpm(:, 4);
spindle.rpm1.z = spindle_1rpm(:, 5);
spindle.rpm1.adcn = noise_1rpm;
spindle.rpm60.time = spindle_60rpm(:, 1);
spindle.rpm60.deg = spindle_60rpm(:, 2);
spindle.rpm60.Ts = Ts_60rpm;
spindle.rpm60.Fs = 1/Ts_60rpm;
spindle.rpm60.x = spindle_60rpm(:, 3);
spindle.rpm60.y = spindle_60rpm(:, 4);
spindle.rpm60.z = spindle_60rpm(:, 5);
spindle.rpm60.adcn = noise_60rpm;
#+end_src
** Compute Asynchronous data
#+begin_src matlab :results none :exports code
for direction = {'x', 'y', 'z'}
spindle.rpm1.([direction{1}, 'async']) = getAsynchronousError(spindle.rpm1.(direction{1}), 10);
spindle.rpm60.([direction{1}, 'async']) = getAsynchronousError(spindle.rpm60.(direction{1}), 10);
end
#+end_src
2019-05-10 16:06:43 +02:00
** Save data
#+begin_src matlab
save('./mat/spindle_data.mat', 'spindle');
#+end_src
2019-03-14 16:40:28 +01:00
* Time Domain Data
2019-05-10 16:06:43 +02:00
:PROPERTIES:
:header-args:matlab+: :tangle matlab/spindle_time_domain.m
:header-args:matlab+: :comments org :mkdirp yes
:END:
<<sec:spindle_time_domain >>
#+begin_src bash :exports none :results none
if [ matlab/spindle_time_domain.m -nt data/spindle_time_domain.zip ]; then
cp matlab/spindle_time_domain.m spindle_time_domain.m;
zip data/spindle_time_domain \
mat/spindle_data.mat \
spindle_time_domain.m
rm spindle_time_domain.m;
fi
#+end_src
#+begin_note
All the files (data and Matlab scripts) are accessible [[file:data/spindle_time_domain.zip ][here ]].
#+end_note
** Matlab Init :noexport:ignore:
#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
<<matlab-dir >>
#+end_src
#+begin_src matlab :exports none :results none :noweb yes
<<matlab-init >>
#+end_src
** Load the processed data
#+begin_src matlab
load('./mat/spindle_data.mat', 'spindle');
#+end_src
2019-03-14 16:40:28 +01:00
** Plot X-Y-Z position with respect to Time - 1rpm
#+begin_src matlab :results none :exports code
figure;
hold on;
plot(spindle.rpm1.time, spindle.rpm1.x);
plot(spindle.rpm1.time, spindle.rpm1.y);
plot(spindle.rpm1.time, spindle.rpm1.z);
hold off;
xlabel('Time [s]'); ylabel('Amplitude [m]');
legend({'tx - 1rpm', 'ty - 1rpm', 'tz - 1rpm'});
#+end_src
#+NAME : fig:spindle_xyz_1rpm
#+HEADER : :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="figs/spindle_xyz_1rpm.pdf" :var figsize= "wide-tall" :post pdf2svg(file=*this*, ext= "png")
<<plt-matlab >>
#+end_src
#+NAME : fig:spindle_xyz_1rpm
#+CAPTION : Raw time domain translation - 1rpm
#+RESULTS : fig:spindle_xyz_1rpm
[[file:figs/spindle_xyz_1rpm.png ]]
** Plot X-Y-Z position with respect to Time - 60rpm
The measurements for the spindle turning at 60rpm are shown figure [[fig:spindle_xyz_60rpm ]].
#+begin_src matlab :results none :exports code
figure;
hold on;
plot(spindle.rpm60.time, spindle.rpm60.x);
plot(spindle.rpm60.time, spindle.rpm60.y);
plot(spindle.rpm60.time, spindle.rpm60.z);
hold off;
xlabel('Time [s]'); ylabel('Amplitude [m]');
legend({'tx - 60rpm', 'ty - 60rpm', 'tz - 60rpm'});
#+end_src
#+NAME : fig:spindle_xyz_60rpm
#+HEADER : :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="figs/spindle_xyz_60rpm.pdf" :var figsize= "wide-tall" :post pdf2svg(file=*this*, ext= "png")
<<plt-matlab >>
#+end_src
#+NAME : fig:spindle_xyz_60rpm
#+CAPTION : Raw time domain translation - 60rpm
#+RESULTS : fig:spindle_xyz_60rpm
[[file:figs/spindle_xyz_60rpm.png ]]
** Plot Synchronous and Asynchronous - 1rpm
#+begin_src matlab :results none :exports code
figure;
hold on;
plot(spindle.rpm1.time, spindle.rpm1.x);
plot(spindle.rpm1.time, spindle.rpm1.xasync);
hold off;
xlabel('Time [s]'); ylabel('Amplitude [m]');
legend({'tx - 1rpm - Sync', 'tx - 1rpm - Async'});
#+end_src
#+NAME : fig:spindle_1rpm_sync_async
#+HEADER : :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="figs/spindle_1rpm_sync_async.pdf" :var figsize= "wide-tall" :post pdf2svg(file=*this*, ext= "png")
<<plt-matlab >>
#+end_src
#+NAME : fig:spindle_1rpm_sync_async
#+CAPTION : Comparison of the synchronous and asynchronous displacements - 1rpm
#+RESULTS : fig:spindle_1rpm_sync_async
[[file:figs/spindle_1rpm_sync_async.png ]]
** Plot Synchronous and Asynchronous - 60rpm
The data is split into its Synchronous and Asynchronous part (figure [[fig:spindle_60rpm_sync_async ]]). We then use the Asynchronous part for the analysis in the following sections as we suppose that we can deal with the synchronous part with feedforward control.
#+begin_src matlab :results none :exports code
figure;
hold on;
plot(spindle.rpm60.time, spindle.rpm60.x);
plot(spindle.rpm60.time, spindle.rpm60.xasync);
hold off;
xlabel('Time [s]'); ylabel('Amplitude [m]');
legend({'tx - 60rpm - Sync', 'tx - 60rpm - Async'});
#+end_src
#+NAME : fig:spindle_60rpm_sync_async
#+HEADER : :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="figs/spindle_60rpm_sync_async.pdf" :var figsize= "wide-tall" :post pdf2svg(file=*this*, ext= "png")
<<plt-matlab >>
#+end_src
#+NAME : fig:spindle_60rpm_sync_async
#+CAPTION : Comparison of the synchronous and asynchronous displacements - 60rpm
#+RESULTS : fig:spindle_60rpm_sync_async
[[file:figs/spindle_60rpm_sync_async.png ]]
** Plot X against Y
#+begin_src matlab :results none :exports code
figure;
hold on;
plot(spindle.rpm1.x, spindle.rpm1.y);
plot(spindle.rpm60.x, spindle.rpm60.y);
hold off;
xlabel('X Amplitude [m]'); ylabel('Y Amplitude [m]');
legend({'1rpm', '60rpm'});
#+end_src
#+NAME : fig:spindle_xy_1_60rpm
#+HEADER : :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="figs/spindle_xy_1_60rpm.pdf" :var figsize= "wide-tall" :post pdf2svg(file=*this*, ext= "png")
<<plt-matlab >>
#+end_src
#+NAME : fig:spindle_xy_1_60rpm
#+CAPTION : Synchronous x-y displacement
#+RESULTS : fig:spindle_xy_1_60rpm
[[file:figs/spindle_xy_1_60rpm.png ]]
** Plot X against Y - Asynchronous
#+begin_src matlab :results none :exports code
figure;
hold on;
plot(spindle.rpm1.xasync, spindle.rpm1.yasync);
plot(spindle.rpm60.xasync, spindle.rpm60.yasync);
hold off;
xlabel('X Amplitude [m]'); ylabel('Y Amplitude [m]');
legend({'1rpm', '60rpm'});
#+end_src
#+NAME : fig:spindle_xy_1_60_rpm_async
#+HEADER : :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="figs/spindle_xy_1_60_rpm_async.pdf" :var figsize= "wide-tall" :post pdf2svg(file=*this*, ext= "png")
<<plt-matlab >>
#+end_src
#+NAME : fig:spindle_xy_1_60_rpm_async
#+CAPTION : Asynchronous x-y displacement
#+RESULTS : fig:spindle_xy_1_60_rpm_async
[[file:figs/spindle_xy_1_60_rpm_async.png ]]
* Model of the spindle
2019-05-10 16:06:43 +02:00
:PROPERTIES:
:header-args:matlab+: :tangle matlab/spindle_model.m
:header-args:matlab+: :comments org :mkdirp yes
:END:
<<sec:spindle_model >>
#+begin_src bash :exports none :results none
if [ matlab/spindle_model.m -nt data/spindle_model.zip ]; then
cp matlab/spindle_model.m spindle_model.m;
zip data/spindle_model \
spindle_model.m
rm spindle_model.m;
fi
#+end_src
#+begin_note
All the files (data and Matlab scripts) are accessible [[file:data/spindle_model.zip ][here ]].
#+end_note
** Schematic of the model
2019-03-14 16:40:28 +01:00
The model of the spindle used is shown figure [[fig:model_spindle ]].
$f$ is the perturbation force of the spindle and $d$ is the measured displacement.
#+name : fig:model_spindle
#+caption : Model of the Spindle
#+attr_latex : :float t
[[./figs/uniaxial-model-spindle.png ]]
2019-05-10 16:06:43 +02:00
** Matlab Init :noexport:ignore:
#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
<<matlab-dir >>
#+end_src
#+begin_src matlab :exports none :results silent :noweb yes
<<matlab-init >>
#+end_src
#+begin_src matlab :exports none :results silent :noweb yes
%% Add the getAsynchronousError to path
addpath('./src/ ');
#+end_src
2019-03-14 16:40:28 +01:00
** Parameters
#+begin_src matlab :exports code :results none
mg = 3000; % Mass of granite [kg]
ms = 50; % Mass of Spindle [kg]
kg = 1e8; % Stiffness of granite [N/m]
ks = 5e7; % Stiffness of spindle [N/m]
#+end_src
** Compute Mass and Stiffness Matrices
#+begin_src matlab :exports code :results none
Mm = diag([ms, mg]);
Km = diag([ks, ks+kg]) - diag(ks, -1) - diag(ks, 1);
#+end_src
** Compute resonance frequencies
#+begin_src matlab :exports code :results none
A = [zeros(size(Mm)) eye(size(Mm)) ; -Mm\Km zeros(size(Mm))];
eigA = imag(eigs(A))/2/pi;
eigA = eigA(eigA>0);
eigA = eigA(1:2);
#+end_src
** From model_damping compute the Damping Matrix
#+begin_src matlab :exports code :results none
modal_damping = 1e-5;
ab = [0.5*eigA(1) 0.5/eigA(1) ; 0.5*eigA(2) 0.5/eigA(2)]\[modal_damping ; modal_damping];
Cm = ab(1)*Mm +ab(2)*Km;
#+end_src
** Define inputs, outputs and state names
#+begin_src matlab :exports code :results none
StateName = {...
'xs', ... % Displacement of Spindle [m]
'xg', ... % Displacement of Granite [m]
'vs', ... % Velocity of Spindle [m]
'vg', ... % Velocity of Granite [m]
};
StateUnit = {'m', 'm', 'm/s', 'm/s'};
InputName = {...
'f' ... % Spindle Force [N]
};
InputUnit = {'N'};
OutputName = {...
'd' ... % Displacement [m]
};
OutputUnit = {'m'};
#+end_src
** Define A, B and C matrices
#+begin_src matlab :exports code :results none
% A Matrix
A = [zeros(size(Mm)) eye(size(Mm)) ; ...
-Mm\Km -Mm\Cm];
% B Matrix
B_low = zeros(length(StateName), length(InputName));
B_low(strcmp(StateName,'vs'), strcmp(InputName,'f')) = 1;
B_low(strcmp(StateName,'vg'), strcmp(InputName,'f')) = -1;
B = blkdiag(zeros(length(StateName)/2), pinv(Mm))*B_low;
% C Matrix
C = zeros(length(OutputName), length(StateName));
C(strcmp(OutputName,'d'), strcmp(StateName,'xs')) = 1;
C(strcmp(OutputName,'d'), strcmp(StateName,'xg')) = -1;
% D Matrix
D = zeros(length(OutputName), length(InputName));
#+end_src
** Generate the State Space Model
#+begin_src matlab :exports code :results none
sys = ss(A, B, C, D);
sys.StateName = StateName;
sys.StateUnit = StateUnit;
sys.InputName = InputName;
sys.InputUnit = InputUnit;
sys.OutputName = OutputName;
sys.OutputUnit = OutputUnit;
#+end_src
** Bode Plot
The transfer function from a disturbance force $f$ to the measured displacement $d$ is shown figure [[fig:spindle_f_to_d ]].
#+begin_src matlab :exports code :results none
freqs = logspace(-1, 3, 1000);
figure;
plot(freqs, abs(squeeze(freqresp(sys('d', 'f'), freqs, 'Hz'))));
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
xlabel('Frequency [Hz]'); ylabel('Amplitude [m/N]');
#+end_src
#+NAME : fig:spindle_f_to_d
#+HEADER : :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="figs/spindle_f_to_d.pdf" :var figsize= "wide-tall" :post pdf2svg(file=*this*, ext= "png")
<<plt-matlab >>
#+end_src
#+NAME : fig:spindle_f_to_d
#+CAPTION : Bode plot of the transfer function from $f$ to $d$
#+RESULTS : fig:spindle_f_to_d
[[file:figs/spindle_f_to_d.png ]]
2019-05-10 16:06:43 +02:00
** Save the model
#+begin_src matlab
save('./mat/spindle_model.mat', 'sys');
#+end_src
* Frequency Domain Data
:PROPERTIES:
:header-args:matlab+: :tangle matlab/spindle_psd.m
:header-args:matlab+: :comments org :mkdirp yes
:END:
<<sec:spindle_psd >>
#+begin_src bash :exports none :results none
if [ matlab/spindle_psd.m -nt data/spindle_psd.zip ]; then
cp matlab/spindle_psd.m spindle_psd.m;
zip data/spindle_psd \
mat/spindle_data.mat \
mat/spindle_model.mat \
spindle_psd.m
rm spindle_psd.m;
fi
#+end_src
#+begin_note
All the files (data and Matlab scripts) are accessible [[file:data/spindle_psd.zip ][here ]].
#+end_note
** Matlab Init :noexport:ignore:
#+begin_src matlab :tangle no :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
<<matlab-dir >>
#+end_src
#+begin_src matlab :exports none :results silent :noweb yes
<<matlab-init >>
#+end_src
** Load the processed data and the model
#+begin_src matlab
load('./mat/spindle_data.mat', 'spindle');
load('./mat/spindle_model.mat', 'sys');
#+end_src
2019-03-14 16:40:28 +01:00
** Compute the PSD
#+begin_src matlab :exports code :results none
n_av = 4; % Number of average
[pxx_1rpm, f_1rpm] = pwelch(spindle.rpm1.xasync, hanning(ceil(length(spindle.rpm1.xasync)/n_av)), [], [], spindle.rpm1.Fs);
[pyy_1rpm, ~] = pwelch(spindle.rpm1.yasync, hanning(ceil(length(spindle.rpm1.yasync)/n_av)), [], [], spindle.rpm1.Fs);
[pzz_1rpm, ~] = pwelch(spindle.rpm1.zasync, hanning(ceil(length(spindle.rpm1.zasync)/n_av)), [], [], spindle.rpm1.Fs);
[pxx_60rpm, f_60rpm] = pwelch(spindle.rpm60.xasync, hanning(ceil(length(spindle.rpm60.xasync)/n_av)), [], [], spindle.rpm60.Fs);
[pyy_60rpm, ~] = pwelch(spindle.rpm60.yasync, hanning(ceil(length(spindle.rpm60.yasync)/n_av)), [], [], spindle.rpm60.Fs);
[pzz_60rpm, ~] = pwelch(spindle.rpm60.zasync, hanning(ceil(length(spindle.rpm60.zasync)/n_av)), [], [], spindle.rpm60.Fs);
#+end_src
** Plot the computed PSD
The Amplitude Spectral Densities of the displacement of the spindle for the $x$, $y$ and $z$ directions are shown figure [[fig:spindle_psd_xyz_60rpm ]]. They correspond to the Asynchronous part shown figure [[fig:spindle_60rpm_sync_async ]].
#+begin_src matlab :exports code :results none
figure;
hold on;
plot(f_1rpm, (pxx_1rpm).^.5, 'DisplayName', '$P_ {xx}$ - 1rpm');
plot(f_1rpm, (pyy_1rpm).^.5, 'DisplayName', '$P_ {yy}$ - 1rpm');
plot(f_1rpm, (pzz_1rpm).^.5, 'DisplayName', '$P_ {zz}$ - 1rpm');
% plot(f_1rpm, spindle.rpm1.adcn*ones(size(f_1rpm)), '--k', 'DisplayName', 'ADC - 1rpm');
hold off;
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
xlabel('Frequency [Hz]'); ylabel('ASD [$m/\sqrt{Hz}$]');
legend('Location', 'northeast');
xlim([f_1rpm(2), f_1rpm(end)]);
#+end_src
#+NAME : fig:spindle_psd_xyz_1rpm
#+HEADER : :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="figs/spindle_psd_xyz_1rpm.pdf" :var figsize= "wide-normal" :post pdf2svg(file=*this*, ext= "png")
<<plt-matlab >>
#+end_src
#+NAME : fig:spindle_psd_xyz_1rpm
#+CAPTION : Power spectral density of the Asynchronous displacement - 1rpm
#+RESULTS : fig:spindle_psd_xyz_1rpm
[[file:figs/spindle_psd_xyz_1rpm.png ]]
#+begin_src matlab :exports code :results none
figure;
hold on;
plot(f_60rpm, (pxx_60rpm).^.5, 'DisplayName', '$P_ {xx}$ - 60rpm');
plot(f_60rpm, (pyy_60rpm).^.5, 'DisplayName', '$P_ {yy}$ - 60rpm');
plot(f_60rpm, (pzz_60rpm).^.5, 'DisplayName', '$P_ {zz}$ - 60rpm');
% plot(f_60rpm, spindle.rpm60.adcn*ones(size(f_60rpm)), '--k', 'DisplayName', 'ADC - 60rpm');
hold off;
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
xlabel('Frequency [Hz]'); ylabel('ASD [$m/\sqrt{Hz}$]');
legend('Location', 'northeast');
xlim([f_60rpm(2), f_60rpm(end)]);
#+end_src
#+NAME : fig:spindle_psd_xyz_60rpm
#+HEADER : :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="figs/spindle_psd_xyz_60rpm.pdf" :var figsize= "wide-normal" :post pdf2svg(file=*this*, ext= "png")
<<plt-matlab >>
#+end_src
#+NAME : fig:spindle_psd_xyz_60rpm
#+CAPTION : Power spectral density of the Asynchronous displacement - 60rpm
#+RESULTS : fig:spindle_psd_xyz_60rpm
[[file:figs/spindle_psd_xyz_60rpm.png ]]
2019-05-10 16:06:43 +02:00
** Compute the response of the model
2019-03-14 16:40:28 +01:00
#+begin_src matlab :exports code :results none
Tfd = abs(squeeze(freqresp(sys('d', 'f'), f_60rpm, 'Hz')));
#+end_src
** Plot the PSD of the Force using the model
#+begin_src matlab :exports code :results none
figure;
plot(f_60rpm, (pxx_60rpm.^.5)./Tfd, 'DisplayName', '$P_ {xx}$');
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
xlabel('Frequency [Hz]'); ylabel('ASD [$N/\sqrt{Hz}$]');
xlim([f_60rpm(2), f_60rpm(end)]);
#+end_src
#+NAME : fig:spindle_psd_f_60rpm
#+HEADER : :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="figs/spindle_psd_f_60rpm.pdf" :var figsize= "wide-normal" :post pdf2svg(file=*this*, ext= "png")
<<plt-matlab >>
#+end_src
#+NAME : fig:spindle_psd_f_60rpm
#+CAPTION : Power spectral density of the force - 60rpm
#+RESULTS : fig:spindle_psd_f_60rpm
[[file:figs/spindle_psd_f_60rpm.png ]]
** Estimated Shape of the PSD of the force
#+begin_src matlab :exports code :results none
s = tf('s');
Wd_simple = 1e-8/(1+s/2/pi/0.5)/ (1+s/2/pi/100);
Wf_simple = Wd_simple/tf(sys('d', 'f'));
TWf_simple = abs(squeeze(freqresp(Wf_simple, f_60rpm, 'Hz')));
% Wf = 0.48902*(s+327.9)* (s^2 + 109.6*s + 1.687e04)/((s^2 + 30.59*s + 8541)*(s^2 + 29.11*s + 3.268e04));
% Wf = 0.15788*(s+418.6)* (s+1697)^2*(s^2 + 124.3*s + 2.529e04)* (s^2 + 681.3*s + 9.018e05)/((s^2 + 23.03*s + 8916)*(s^2 + 33.85*s + 6.559e04)*(s^2 + 71.43*s + 4.283e05)*(s^2 + 40.64*s + 1.789e06));
Wf = (s+1697)^2*(s^2 + 114.5*s + 2.278e04)* (s^2 + 205.1*s + 1.627e05)*(s^2 + 285.8*s + 8.624e05)*(s+100)/((s+0.5)*3012*(s^2 + 23.03*s + 8916)* (s^2 + 17.07*s + 4.798e04)*(s^2 + 41.17*s + 4.347e05)*(s^2 + 78.99*s + 1.789e06));
TWf = abs(squeeze(freqresp(Wf, f_60rpm, 'Hz')));
#+end_src
** PSD in [N]
Above $200Hz$, the Amplitude Spectral Density seems dominated by noise coming from the electronics (charge amplifier, ADC, ...). So we don't know what is the frequency content of the force above that frequency. However, we assume that $P_{xx}$ is decreasing with $1/f$ as it seems so be the case below $100Hz$ (figure [[fig:spindle_psd_xyz_60rpm ]]).
We then fit the PSD of the displacement with a transfer function (figure [[fig:spindle_psd_d_comp_60rpm ]]).
#+begin_src matlab :exports code :results none
figure;
hold on;
plot(f_60rpm, (pxx_60rpm.^.5)./Tfd, 'DisplayName', '$\sqrt{P_ {xx}}/|T_{d/f}|$');
plot(f_60rpm, TWf, 'DisplayName', 'Wf');
plot(f_60rpm, TWf_simple, '-k', 'DisplayName', 'Wfs');
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
xlabel('Frequency [Hz]'); ylabel('ASD [$N/\sqrt{Hz}$]');
xlim([f_60rpm(2), f_60rpm(end)]);
legend('Location', 'northeast');
#+end_src
#+NAME : fig:spindle_psd_f_comp_60rpm
#+HEADER : :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="figs/spindle_psd_f_comp_60rpm.pdf" :var figsize= "wide-tall" :post pdf2svg(file=*this*, ext= "png")
<<plt-matlab >>
#+end_src
#+NAME : fig:spindle_psd_f_comp_60rpm
#+CAPTION : Power spectral density of the force - 60rpm
#+RESULTS : fig:spindle_psd_f_comp_60rpm
[[file:figs/spindle_psd_f_comp_60rpm.png ]]
** PSD in [m]
To obtain the PSD of the force $f$ that induce such displacement, we use the following formula:
\[ \sqrt{PSD(d)} = |T_{d/f}| \sqrt{PSD(f)} \]
And so we have:
\[ \sqrt{PSD(f)} = |T_{d/f}|^{-1} \sqrt{PSD(d)} \]
The obtain Power Spectral Density of the force is displayed figure [[fig:spindle_psd_f_comp_60rpm ]].
#+begin_src matlab :exports code :results none
figure;
hold on;
plot(f_60rpm, pxx_60rpm.^.5, 'DisplayName', '$\sqrt{P_ {xx}}$');
plot(f_60rpm, TWf.*Tfd, 'DisplayName', '$|W_f|* |T_{d/f}|$');
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
xlabel('Frequency [Hz]'); ylabel('ASD [$m/\sqrt{Hz}$]');
xlim([f_60rpm(2), f_60rpm(end)]);
legend('Location', 'northeast');
#+end_src
#+NAME : fig:spindle_psd_d_comp_60rpm
#+HEADER : :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="figs/spindle_psd_d_comp_60rpm.pdf" :var figsize= "wide-tall" :post pdf2svg(file=*this*, ext= "png")
<<plt-matlab >>
#+end_src
#+NAME : fig:spindle_psd_d_comp_60rpm
#+CAPTION : Comparison of the power spectral density of the measured displacement and of the model
#+RESULTS : fig:spindle_psd_d_comp_60rpm
[[file:figs/spindle_psd_d_comp_60rpm.png ]]
** Compute the resulting RMS value [m]
#+begin_src matlab :exports code :results none
figure;
hold on;
plot(f_60rpm, 1e9*cumtrapz(f_60rpm, (pxx_60rpm)).^.5, '--', 'DisplayName', 'Exp. Data');
plot(f_60rpm, 1e9*cumtrapz(f_60rpm, ((TWf.*Tfd).^2)).^.5, '--', 'DisplayName', 'Estimated');
hold off;
set(gca, 'XScale', 'log');
xlabel('Frequency [Hz]'); ylabel('CPS [$nm$ rms]');
xlim([f_60rpm(2), f_60rpm(end)]);
legend('Location', 'southeast');
#+end_src
#+NAME : fig:spindle_cps_d_comp_60rpm
#+HEADER : :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="figs/spindle_cps_d_comp_60rpm.pdf" :var figsize= "wide-normal" :post pdf2svg(file=*this*, ext= "png")
<<plt-matlab >>
#+end_src
#+NAME : fig:spindle_cps_d_comp_60rpm
#+CAPTION : Cumulative Power Spectrum - 60rpm
#+RESULTS : fig:spindle_cps_d_comp_60rpm
[[file:figs/spindle_cps_d_comp_60rpm.png ]]
** Compute the resulting RMS value [m]
#+begin_src matlab :exports code :results none
figure;
hold on;
plot(f_1rpm, 1e9*cumtrapz(f_1rpm, (pxx_1rpm)), '--', 'DisplayName', 'Exp. Data');
plot(f_1rpm, 1e9*(f_1rpm(end)-f_1rpm(1))/(length(f_1rpm)-1)*cumsum(pxx_1rpm), '--', 'DisplayName', 'Exp. Data');
hold off;
set(gca, 'XScale', 'log');
xlabel('Frequency [Hz]'); ylabel('CPS [$nm$ rms]');
xlim([f_1rpm(2), f_1rpm(end)]);
legend('Location', 'southeast');
#+end_src
#+NAME : fig:spindle_cps_d_comp_1rpm
#+HEADER : :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="figs/spindle_cps_d_comp_1rpm.pdf" :var figsize= "wide-normal" :post pdf2svg(file=*this*, ext= "png")
<<plt-matlab >>
#+end_src
#+NAME : fig:spindle_cps_d_comp_1rpm
#+CAPTION : Cumulative Power Spectrum - 1rpm
#+RESULTS : fig:spindle_cps_d_comp_1rpm
[[file:figs/spindle_cps_d_comp_1rpm.png ]]
* Functions
** getAsynchronousError
2019-05-10 16:06:43 +02:00
:PROPERTIES:
:header-args:matlab+: :tangle src/getAsynchronousError.m
:header-args:matlab+: :comments org :mkdirp yes
:END:
<<sec:getAsynchronousError >>
This Matlab function is accessible [[file:src/getAsynchronousError.m ][here ]].
#+begin_src matlab :eval no :results none
2019-03-14 16:40:28 +01:00
function [Wxdec] = getAsynchronousError(data, NbTurn)
%%
L = length(data);
res_per_rev = L/NbTurn;
P = 0:(res_per_rev*NbTurn-1);
Pos = P' * 360/res_per_rev;
% Temperature correction
x1 = myfit2(Pos, data);
% Convert data to frequency domain and scale accordingly
X2 = 2/(res_per_rev*NbTurn)*fft(x1);
f2 = (0:L-1)./NbTurn; %upr -> once per revolution
%%
X2dec = zeros(size(X2));
% Get only the non integer data
X2dec(mod(f2(:), 1) ~= 0) = X2(mod(f2(:), 1) ~ = 0);
Wxdec = real((res_per_rev*NbTurn)/2 * ifft(X2dec));
%%
function Y = myfit2(x,y)
A = [x ones(size(x))]\y;
a = A(1); b = A(2);
Y = y - (a*x + b);
end
end
#+end_src
