nass-metrology-test-bench/matlab/run_test.m

tg = slrt;

%%
if tg.Connected == "Yes"
    if tg.Status == "stopped"
        %% Load the application
        tg.load('test_sercalo');

        %% Run the application
        tg.start;
        pause(101);
        tg.stop;
    end
end

%%
f = SimulinkRealTime.openFTP(tg);
mget(f, 'data/data_001.dat');
close(f);

%% Convert the Data
data = SimulinkRealTime.utils.getFileScopeData('data/data_001.dat').data;

Uch = data(:, 1);
Ucv = data(:, 2);
Unh = data(:, 3);
Unv = data(:, 4);
Vph = data(:, 5);
Vpv = data(:, 6);
Vch = data(:, 7);
Vcv = data(:, 8);
Vnh = data(:, 9);
Vnv = data(:, 10);
Va  = data(:, 11);
t  = data(:, end);

%% Plot the data
figure;
subplot(2, 3, 1);
hold on;
plot(t, Ucv, 'DisplayName', 'Ucv');
plot(t, Vpv, 'DisplayName', 'Vpv');
hold off
xlabel('Time [s]');
ylabel('Voltage [V]');
legend();

subplot(2, 3, 2);
hold on;
plot(t, Uch, 'DisplayName', 'Uch');
plot(t, Vph, 'DisplayName', 'Vph');
hold off
xlabel('Time [s]');
ylabel('Voltage [V]');
legend();

subplot(2, 3, 3);
hold on;
plot(t, Vch, 'DisplayName', 'Vch');
plot(t, Vcv, 'DisplayName', 'Vcv');
hold off
xlabel('Time [s]');
ylabel('Voltage [V]');
legend();

subplot(2, 3, 4);
hold on;
plot(t, Unh, 'DisplayName', 'Unh');
plot(t, Vnh, 'DisplayName', 'Vnh');
hold off
xlabel('Time [s]');
ylabel('Voltage [V]');
legend();

subplot(2, 3, 5);
hold on;
plot(t, Unv, 'DisplayName', 'Unv');
plot(t, Vnv, 'DisplayName', 'Vnv');
hold off
xlabel('Time [s]');
ylabel('Voltage [V]');
legend();

subplot(2, 3, 6);
hold on;
plot(t, Va, 'DisplayName', 'Va');
hold off
xlabel('Time [s]');
ylabel('Distance [m]');
legend();

%% Save
save('mat/data_rep_1.mat', 't', 'Uch', 'Ucv', ...
                             'Unh', 'Unv', ...
                             'Vph', 'Vpv', ...
                             'Vch', 'Vcv', ...
                             'Vnh', 'Vnv', ...
                             'Va');

%% Save - Huddle Test
save('mat/data_huddle_test_4.mat', 't', 'Vph', 'Vpv', 'Va');