literate-dotfiles/nas.org
2021-01-11 16:32:27 +01:00

57 KiB

Home Server

Installation

Hardware

Part Model
Case Fractal Design Node 804
Motherboard ASUS PRIME B450M-A
CPU AMD Ryzen 3 3200G
RAM Corsair Vengeance LPX 16Go (2x8Go) DDR4 3200MHz
Cooler ARCTIC Freezer 34 eSports DUO
PSU Corsair SF450
SSD M.2 Samsung 970 EVO Plus 250Gb
Disk Drives Various drives ranging from 3Tb to 8Tb
Home Server Hardware

Ubuntu

  • Download Ubuntu Server 20.04 LTS (link).
  • Activate OpenSSH and add SSH Keys
  • Account: thomas, hostname: homelab

Install Important software

sudo apt install neovim tmux fd-find ripgrep apache2-utils unrar ranger fzf stow

Terminal Problem

On the local host, using Termite:

infocmp > termite.terminfo  # export Termite's Terminfo
scp termite.terminfo user@remote-host:~/  # or any other method to copy to the remote host

On the remote host, in the directory where you copied termite.terminfo:

tic -x termite.terminfo  # import Terminfo for current user
rm termite.terminfo  # optional: remove Terminfo file

Minor Modifications of ~/.inputrc

Modify ~/.inputrc, like so:

"\e[A": history-search-backward            # arrow up
"\e[B": history-search-forward             # arrow down

Partition and Format Disk Drives

A nice tutorial is available here.

lsblk
sudo parted /dev/sda mklabel gpt
sudo parted -a opt /dev/sda mkpart "partitionname" ext4 0% 100%
sudo mkfs.ext4 -L partitionname /dev/sda1

MergerFS and FStab

MergerFS is a transparent layer that sits on top of the data drives providing a single mount point for reads / writes (link).

sudo apt install mergerfs

Create mount points

sudo mkdir /mnt/disk0
sudo mkdir /mnt/disk1
sudo mkdir /mnt/parity

Create folder where disks will be merged.

sudo mkdir /srv/storage

Edit /etc/fstab.

/dev/disk/by-uuid/7fb7873c-83bd-4805-98ab-506e6c7b56fa /mnt/disk0  ext4 defaults 0 0
/dev/disk/by-uuid/6574b7ae-321c-4078-9793-bc41a4fa5588 /mnt/disk1  ext4 defaults 0 0
/dev/disk/by-uuid/6fcd38b9-0886-46bd-900d-cb1f170dbcee /mnt/parity ext4 defaults 0 0

/mnt/disk* /srv/storage fuse.mergerfs direct_io,defaults,allow_other,minfreespace=50G,fsname=mergerfs 0 0

Automating with SnapRAID Runner

SnapRAID is a snapshot parity calculation tool which acts at the block level independent of filesystem (link).

SnapRAID is here used inside a Docker container (link).

Install Docker

The procedure is well explained here.

If docker is already installed, remove it:

sudo apt remove docker

Executing the Docker Command Without Sudo

sudo usermod -aG docker ${USER}

To apply the new group membership, log out of the server and back in, or type the following:

su - ${USER}

Install Docker-Compose

sudo apt install docker-compose

Setup Docker Networks

docker network create --gateway 192.168.90.1 --subnet 192.168.90.0/24 t2_proxy
docker network create docker_default

Change Timezone

sudo timedatectl set-timezone Europe/Paris

Secure the Web Server

Most of it comes from here.

  • Set PasswordAuthentication no in /etc/ssh/sshd_config

Automatic Security Updates

The procedure is well explained here.

sudo apt install unattended-upgrades update-notifier-common

Edit /etc/apt/apt.conf.d/50unattended-upgrades, and change the following lines:

Unattended-Upgrade::Remove-Unused-Dependencies "true";
Unattended-Upgrade::Automatic-Reboot "true";
Unattended-Upgrade::Automatic-Reboot-Time "04:00";

Edit /etc/apt/apt.conf.d/20auto-upgrades:

APT::Periodic::Update-Package-Lists "1";
APT::Periodic::Unattended-Upgrade "1";

Setup cronjobs

Create a folder ~/cron with all the scripts and logs related to cron.

To edit the cron jobs, type crontab -e and add a line like:

*/5 * * * * /home/thomas/cron/caddy_update.sh >> /home/thomas/cron/caddy_update.log 2>&1

That will run every 5 minutes. To check how the first part of the crontab works, check this website.

Run docker-compose

cd ~/docker && docker-compose up -d

Maintenance - How To

Update System/Packages

sudo -- sh -c 'apt-get update; apt-get upgrade -y; apt-get dist-upgrade -y; apt-get autoremove -y; apt-get autoclean -y'

Docker Commands

  • Starting a container: $ docker start homeassistant
  • Stopping a container: $ docker stop homeassistant
  • Restarting a container: $ docker restart homeassistant
  • Listing the running containers: $ docker ps or $ cd ~/docker/ && docker-compose ps
  • View the logs of a container: $ docker logs -f homeassistant
  • Drop a shell into a container: $ docker exec -it homeassistant /bin/bash
  • Update specific container: docker-compose pull --ignore-pull-failures homeassistant

Update All Containers

cd ~/docker/ && docker-compose pull --ignore-pull-failures && docker-compose up -d

Clean up Docker environment This will delete all unused images, volumes and networks.

docker system prune -f && docker image prune -f && docker volume prune -f

Add User and Password for Basic Authentication

Snapraid

To see all files "backed up" by snapraid, use:

docker exec -ti snapraid snapraid list | fzf

In reality, snapraid in ran from the docker container:

docker exec -ti snapraid snapraid fix -f <path_to_file>

The path to file should be relative: /srv/storage/Cloud/org/file.org -> /Cloud/org/file.org

Restore Online backup with restic

To list backups:

docker exec restic restic snapshots
ID        Time                 Host          Tags        Paths
--------------------------------------------------------------------------------
a7b98408  2020-09-03 21:18:00  4803c2af7d4e              /data/documents/manuals
088e31a4  2020-09-03 21:50:26  4803c2af7d4e              /data/documents/manuals
9cf0b480  2020-09-03 22:05:47  4803c2af7d4e              /data/documents/manuals
--------------------------------------------------------------------------------
3 snapshots

Force backup of folder:

docker exec restic restic backup /data/documents/manuals

Files:           0 new,     2 changed,  8475 unmodified
Dirs:            0 new,     2 changed,     0 unmodified
Added to the repo: 1.010 KiB

processed 8477 files, 589.800 MiB in 0:02
snapshot 9cf0b480 saved

Find the path to the file within the snapshot:

docker exec restic restic find file_name

Find files only for a specific snapshot:

docker exec restic restic find -s latest file_name

Backup files/folders:

docker exec restic restic restore --include /data/documents/manuals --target / 088e31a4

You can use latest instead of the ID.

Docker-Compose

version: "3.2"

Networks

networks:
  t2_proxy:
    external:
      name: t2_proxy
  backend:
    external: false
  default:
    driver: bridge

Traefik

services:
  traefik:
    container_name: traefik
    image: traefik:2.2.1
    restart: unless-stopped
    command:
      - --global.checkNewVersion=true
      - --global.sendAnonymousUsage=false
      - --entryPoints.http.address=:80
      - --entryPoints.https.address=:443
      - --entrypoints.https.forwardedHeaders.trustedIPs=173.245.48.0/20,103.21.244.0/22,103.22.200.0/22,103.31.4.0/22,141.101.64.0/18,108.162.192.0/18,190.93.240.0/20,188.114.96.0/20,197.234.240.0/22,198.41.128.0/17,162.158.0.0/15,104.16.0.0/12,172.64.0.0/13,131.0.72.0/22
      - --entryPoints.traefik.address=:8080
      - --api=true
      - --api.dashboard=true
      - --log=true
      - --log.level=ERROR # (Default: error) DEBUG, INFO, WARN, ERROR, FATAL, PANIC
      - --accessLog=true
      - --accessLog.filePath=/var/log/access.log
      - --accessLog.filters.statusCodes=400-499
      - --providers.docker=true
      - --providers.docker.endpoint=unix:///var/run/docker.sock
      - --providers.docker.defaultrule=Host(`{{ index .Labels "com.docker.compose.service" }}.$DOMAINNAME`)
      - --providers.docker.exposedByDefault=false
      - --providers.docker.network=t2_proxy
      - --providers.docker.swarmMode=false
      - --providers.file.directory=/rules
      - --providers.file.watch=true
      # - --certificatesResolvers.dns-cloudflare.acme.caServer=https://acme-staging-v02.api.letsencrypt.org/directory # LetsEncrypt Staging Server - uncomment when testing
      - --certificatesResolvers.dns-cloudflare.acme.email=$CLOUDFLARE_EMAIL
      - --certificatesResolvers.dns-cloudflare.acme.storage=/acme.json
      - --certificatesResolvers.dns-cloudflare.acme.dnsChallenge.provider=cloudflare
      - --certificatesResolvers.dns-cloudflare.acme.dnsChallenge.resolvers=1.1.1.1:53,1.0.0.1:53
    networks:
      t2_proxy:
        ipv4_address: 192.168.90.254 # You can specify a static IP
    security_opt:
      - no-new-privileges:true
    ports:
      - 80:80
      - 443:443
      - 8080:8080
    volumes:
      - $CONFIGDIR/traefik2/rules:/rules
      - $CONFIGDIR/traefik2/acme/acme.json:/acme.json
      - $CONFIGDIR/traefik2/shared:/shared
      - /var/log/traefik:/var/log
      - /var/run/docker.sock:/var/run/docker.sock:ro
    environment:
      - CF_API_EMAIL=$CLOUDFLARE_EMAIL
      - CF_API_KEY=$CLOUDFLARE_API_KEY
    labels:
      - "traefik.enable=true"
      # HTTP-to-HTTPS Redirect
      - "traefik.http.routers.http-catchall.entrypoints=http"
      - "traefik.http.routers.http-catchall.rule=HostRegexp(`{host:.+}`)"
      - "traefik.http.routers.http-catchall.middlewares=redirect-to-https"
      - "traefik.http.middlewares.redirect-to-https.redirectscheme.scheme=https"
      # HTTP Routers
      - "traefik.http.routers.traefik-rtr.entrypoints=https"
      - "traefik.http.routers.traefik-rtr.rule=Host(`traefik.$DOMAINNAME`)"
      - "traefik.http.routers.traefik-rtr.tls=true"
      # - "traefik.http.routers.traefik-rtr.tls.certresolver=dns-cloudflare" # Comment out this line after first run of traefik to force the use of wildcard certs
      - "traefik.http.routers.traefik-rtr.tls.domains[0].main=$DOMAINNAME"
      - "traefik.http.routers.traefik-rtr.tls.domains[0].sans=*.$DOMAINNAME"
      # Services - API
      - "traefik.http.routers.traefik-rtr.service=api@internal"
      # Middlewares
      - "traefik.http.routers.traefik-rtr.middlewares=middlewares-basic-auth@file"
      - "traefik.http.routers.traefik-rtr.middlewares=middlewares-rate-limit@file,middlewares-basic-auth@file"
      - "traefik.http.middlewares.traefik-auth.basicauth.users=tdehaeze:$$apr1$$d.JmbY5J$$K8btOi1fwwVYOkCnicCVi."
      # Authelia
      # - 'traefik.http.middlewares.authelia.forwardauth.address=http://authelia:9091/api/verify?rd=https://login.$DOMAINNAME/'
      # - 'traefik.http.middlewares.authelia.forwardauth.trustForwardHeader=true'
      # - 'traefik.http.middlewares.authelia.forwardauth.authResponseHeaders=Remote-User, Remote-Groups'

Homer

  homer:
    container_name: homer
    image: b4bz/homer
    restart: unless-stopped
    networks:
      - t2_proxy
    environment:
      - UID=$PUID
      - GID=$PGID
      - TZ=$TZ
    volumes:
      - $CONFIGDIR/homer/assets/:/www/assets
    labels:
      - "traefik.enable=true"
      - "traefik.http.routers.homer-rtr.entrypoints=https"
      - "traefik.http.routers.homer-rtr.rule=Host(`homer.$DOMAINNAME`)"
      - "traefik.http.routers.homer-rtr.tls=true"
      - "traefik.http.routers.homer-rtr.service=homer-svc"
      - "traefik.http.services.homer-svc.loadbalancer.server.port=8080"

config.yml

---
title: "Homepage"
subtitle: "Homer"
logo: "assets/homer.png"
header: false
footer: false

columns: "auto"
connectivityCheck: false

theme: default

links: []

services:
  - name: "Websites"
    icon: "fas fa-desktop"
    items:
    - name: "Wiki"
      logo: "/assets/tools/brain.png"
      subtitle: "Digital Brain"
      url: "https://brain.tdehaeze.xyz"
    - name: "Research"
      logo: "/assets/tools/orgmode.png"
      subtitle: "Research Pages"
      url: "https://research.tdehaeze.xyz"
    - name: "Dotfiles"
      logo: "/assets/tools/dotfiles.png"
      subtitle: "My Literate Dotfiles"
      url: "https://dotfiles.tdehaeze.xyz"
  - name: "Utilities"
    icon: "fas fa-rss"
    items:
    - name: "Miniflux"
      logo: "/assets/tools/miniflux.png"
      subtitle: "RSS Feeds"
      url: "https://rss.tdehaeze.xyz"
    # - name: "Bitwarden"
    #   logo: "/assets/tools/bitwarden.png"
    #   subtitle: "Password Manager"
    #   url: "https://bw.tdehaeze.xyz"
    - name: "Home Assistant"
      logo: "/assets/tools/homeassistant.png"
      subtitle: "Home Assistant"
      url: "http://home.tdehaeze.xyz:8123"
    - name: "Guacamole"
      logo: "/assets/tools/guacamole.png"
      subtitle: "SSH Access"
      url: "https://guacamole.tdehaeze.xyz/"
  - name: "Cloud"
    icon: "fas fa-cloud"
    items:
    - name: "Cloud"
      logo: "/assets/tools/cloud.png"
      subtitle: "Simple Personnal Could"
      url: "https://cloud.tdehaeze.xyz"
    - name: "Syncthing"
      logo: "/assets/tools/syncthing.png"
      subtitle: "P2P Sync"
      url: "https://syncthing.tdehaeze.xyz"
    - name: "Gitea"
      logo: "/assets/tools/gitea.png"
      subtitle: "Git Server"
      url: "https://git.tdehaeze.xyz"
  - name: "Download"
    icon: "fas fa-download"
    items:
    - name: "Transmission"
      logo: "/assets/tools/transmission.png"
      subtitle: "Torrents"
      url: "https://torrent.tdehaeze.xyz/transmission/web/"
    # - name: "transfer"
    #   logo: "/assets/tools/transfer.png"
    #   subtitle: "Transfer.sh"
    #   url: "https://file.tdehaeze.xyz"
    - name: "deemix"
      subtitle: "Download Music"
      logo: "/assets/tools/deezer.png"
      url: "https://deemix.tdehaeze.xyz"
    - name: "Aria2"
      logo: "/assets/tools/aria2.png"
      subtitle: "Direct Downloads"
      url: "http://dl.tdehaeze.xyz"
  - name: "Media"
    icon: "fas fa-film"
    items:
    - name: "Jellyfin"
      logo: "/assets/tools/jellyfin.png"
      subtitle: "Media Library"
      url: "https://jellyfin.tdehaeze.xyz"
  - name: "Config"
    icon: "fas fa-cog"
    items:
    - name: "Portainer"
      logo: "/assets/tools/portainer.png"
      subtitle: "Manger Docker"
      url: "https://portainer.tdehaeze.xyz"
    - name: "Traefik"
      logo: "/assets/tools/traefik.png"
      subtitle: "Reverse Proxy"
      url: "https://traefik.tdehaeze.xyz"
  - name: "Local"
    icon: "fas fa-home"
    items:
    # - name: "Jackett"
    #   logo: "/assets/tools/jackett.png"
    #   subtitle: "Download API"
    #   url: "http://192.168.1.150:9117/"
    # - name: "Radarr"
    #   logo: "/assets/tools/radarr.png"
    #   subtitle: "Movie Manager"
    #   url: "http://192.168.1.150:7878/"
    # - name: "Sonarr"
    #   logo: "/assets/tools/sonarr.png"
    #   subtitle: "TV Shows Manager"
    #   url: "http://192.168.1.150:8989/"
    # - name: "Ombi"
    #   logo: "/assets/tools/ombi.png"
    #   subtitle: "Request Content"
    #   url: "https://ombi.tdehaeze.xyz/"
    # - name: "Bazarr"
    #   logo: "/assets/tools/bazarr.png"
    #   subtitle: "Subtitles Manager"
    #   url: "http://192.168.1.150:6767/"
    - name: "Scrutiny"
      logo: "/assets/tools/scrutiny.png"
      subtitle: "S.M.A.R.T"
      url: "http://192.168.1.150:8089/web/dashboard"
    - name: "OctoPrint"
      logo: "/assets/tools/octoprint.png"
      subtitle: "3D-Printing"
      url: "http://192.168.1.56/"

Restic

  restic:
    container_name: restic
    image: mazzolino/restic
    restart: "no"
    networks:
      - t2_proxy
    environment:
      - RUN_ON_STARTUP=true
      - BACKUP_CRON=0 30 0 * * *
      - RESTIC_REPOSITORY=rclone:mega:mega
      - RESTIC_PASSWORD="$RESTIC_PASSWORD"
      - RESTIC_BACKUP_SOURCES=/data
      - RESTIC_FORGET_ARGS=--keep-daily 7 --keep-weekly 4 --keep-monthly 12
      - UID=$PUID
      - GID=$PGID
      - TZ=$TZ
    volumes:
      - $CONFIGDIR/restic:/root/.config/rclone
      - /srv/storage/Cloud/thesis:/data/thesis

rclone.conf

[mega]
type = mega
user = dehaeze.thomas@gmail.com
pass = <<get-password(passname="nas/rclone_mega_pass")>>

Snapraid

  snapraid:
    container_name: snapraid
    image: xagaba/snapraid
    restart: unless-stopped
    privileged: true
    volumes:
      - /mnt:/mnt
      - $CONFIGDIR/snapraid:/config
      - type: "bind"
        source: /dev/disk
        target: /dev/disk
    environment:
      - PUID=$PUID
      - PGID=$PGID
      - TZ=$TZ

snapraid.conf

# Defines the file to use as parity storage
# It must NOT be in a data disk
# Format: "parity FILE_PATH"
parity /mnt/parity/snapraid.parity

# Defines the files to use as content list
# You can use multiple specification to store more copies
# You must have least one copy for each parity file plus one. Some more don't
# hurt
# They can be in the disks used for data, parity or boot,
# but each file must be in a different disk
# Format: "content FILE_PATH"
content /var/snapraid.content
content /mnt/disk0/.snapraid.content
content /mnt/disk1/.snapraid.content

# Defines the data disks to use
# The order is relevant for parity, do not change it
# Format: "disk DISK_NAME DISK_MOUNT_POINT"
disk d0 /mnt/disk0
disk d1 /mnt/disk1

# Excludes hidden files and directories (uncomment to enable).
#nohidden

# Defines files and directories to exclude
# Remember that all the paths are relative at the mount points
# Format: "exclude FILE"
# Format: "exclude DIR/"
# Format: "exclude /PATH/FILE"
# Format: "exclude /PATH/DIR/"
exclude *.unrecoverable
exclude /tmp/
exclude /lost+found/
exclude *.!sync
exclude .AppleDouble
exclude ._AppleDouble
exclude .DS_Store
exclude ._.DS_Store
exclude .Thumbs.db
exclude .fseventsd
exclude .Spotlight-V100
exclude .TemporaryItems
exclude .Trashes
exclude .AppleDB

snapraid-runner.conf

[snapraid]
; path to the snapraid executable (e.g. /bin/snapraid)
executable = /usr/bin/snapraid
; path to the snapraid config to be used
config = /config/snapraid.conf
; abort operation if there are more deletes than this, set to -1 to disable
deletethreshold = -1
; if you want touch to be ran each time
touch = false

[logging]
; logfile to write to, leave empty to disable
file = /config/snapraid.log
; maximum logfile size in KiB, leave empty for infinite
maxsize = 5000

; [email]
; ; when to send an email, comma-separated list of [success, error]
; sendon = success,error
; ; set to false to get full programm output via email
; short = true
; subject = [SnapRAID] Status Report:
; from =
; to =
; ; maximum email size in KiB
; maxsize = 500
;
; [smtp]
; host =
; ; leave empty for default port
; port =
; ; set to "true" to activate
; ssl = false
; tls = false
; user =
; password =

[scrub]
; set to true to run scrub after sync
enabled = false
percentage = 12
older-than = 10

Portainer

  portainer:
    container_name: portainer
    image: portainer/portainer
    restart: unless-stopped
    command: -H unix:///var/run/docker.sock
    command: --no-auth
    networks:
      - t2_proxy
    security_opt:
      - no-new-privileges:true
    volumes:
      - /var/run/docker.sock:/var/run/docker.sock:ro
      - $CONFIGDIR/portainer:/data
    environment:
      - TZ=$TZ
    labels:
      - "traefik.enable=true"
      - "traefik.http.routers.portainer-rtr.entrypoints=https"
      - "traefik.http.routers.portainer-rtr.rule=Host(`portainer.$DOMAINNAME`)"
      - "traefik.http.routers.portainer-rtr.tls=true"
      - "traefik.http.routers.portainer-rtr.service=portainer-svc"
      - "traefik.http.routers.portainer-rtr.middlewares=traefik-auth"
      - "traefik.http.services.portainer-svc.loadbalancer.server.port=9000"

Wireguard

  wireguard:
    container_name: wireguard
    image: linuxserver/wireguard
    restart: unless-stopped
    networks:
      - t2_proxy
    cap_add:
      - NET_ADMIN
      - SYS_MODULE
    environment:
      - PUID=$PUID
      - PGID=$PGID
      - TZ=$TZ
      - SERVERURL=wireguard.tdehaeze.xyz
      - SERVERPORT=51820
      - PEERS=3
      - PEERDNS=auto
    volumes:
      - $CONFIGDIR/wireguard:/config
      - /lib/modules:/lib/modules
    ports:
      - 51820:51820/udp

Gitea

  gitea:
    container_name: git
    image: gitea/gitea:1.12.4
    depends_on:
      - gitea_db
    restart: unless-stopped
    networks:
      - t2_proxy
      - backend
    volumes:
      - $CONFIGDIR/gitea:/data
    environment:
      - PUID=$PUID
      - PGID=$PGID
      - TZ=$TZ
      - SSH_PORT=$GITEA_SSH_PORT
    ports:
      - "2222:22"
    labels:
      - "traefik.enable=true"
      - "traefik.http.routers.git-rtr.entrypoints=https"
      - "traefik.http.routers.git-rtr.rule=Host(`git.$DOMAINNAME`)"
      - "traefik.http.routers.git-rtr.tls=true"
      - "traefik.http.routers.git-rtr.service=git-svc"
      - "traefik.http.services.git-svc.loadbalancer.server.port=3000"
  gitea_db:
    container_name: gitea_db
    image: mariadb:10
    restart: unless-stopped
    networks:
      - backend
    ports:
      - 3306:3306
    environment:
      - MYSQL_ROOT_PASSWORD=$GITEA_DB_MYSQL_ROOT_PASSWORD
      - MYSQL_DATABASE=gitea
      - MYSQL_USER=gitea
      - MYSQL_PASSWORD=$GITEA_DB_MYSQL_PASSWORD
    volumes:
      - $CONFIGDIR/mariadb:/var/lib/mysql

Caddy - Research Pages

  caddy:
    container_name: caddy
    image: abiosoft/caddy:1.0.3-no-stats
    restart: unless-stopped
    networks:
      - t2_proxy
    environment:
      - PUID=$PUID
      - PGID=$PGID
      - TZ=$TZ
      - PLUGINS=git
    volumes:
      - $CONFIGDIR/caddy/Caddyfile:/etc/Caddyfile
      - $CONFIGDIR/web:/srv
        # - ~/.ssh:/root/.ssh
    labels:
      - "traefik.enable=true"
      - "traefik.http.routers.caddy-rtr.entrypoints=https"
      - "traefik.http.routers.caddy-rtr.rule=Host(`research.$DOMAINNAME`)"
      - "traefik.http.routers.caddy-rtr.tls=true"
      - "traefik.http.routers.caddy-rtr.service=caddy-svc"
      - "traefik.http.services.caddy-svc.loadbalancer.server.port=2015"

Caddyfile

0.0.0.0:2015 {
    root /srv/www/

    git {
        repo     https://git.tdehaeze.xyz/tdehaeze/research-home-page
        path     /srv/www/
        interval -1
        hook     /research-home-page/webhook QHZgAKjD8q2v54Ru
        then     git submodule update --init --recursive --merge
    }
}

Caddy - Dotfiles

  dotfiles:
    container_name: dotfiles
    image: abiosoft/caddy:1.0.3-no-stats
    restart: unless-stopped
    networks:
      - t2_proxy
    environment:
      - PUID=$PUID
      - PGID=$PGID
      - TZ=$TZ
      - PLUGINS=git
    volumes:
      - $CONFIGDIR/dotfiles/Caddyfile:/etc/Caddyfile
      - $CONFIGDIR/dotfiles/www:/srv/www
    labels:
      - "traefik.enable=true"
      - "traefik.http.routers.dotfiles-rtr.entrypoints=https"
      - "traefik.http.routers.dotfiles-rtr.rule=Host(`dotfiles.$DOMAINNAME`)"
      - "traefik.http.routers.dotfiles-rtr.tls=true"
      - "traefik.http.routers.dotfiles-rtr.service=dotfiles-svc"
      - "traefik.http.services.dotfiles-svc.loadbalancer.server.port=2015"

Caddyfile

0.0.0.0:2015 {
    root /srv/www/docs/

    git {
        repo     https://git.tdehaeze.xyz/tdehaeze/literate-dotfiles
        path     /srv/www/
        interval -1
        hook     /literate-dotfiles/webhook QHZgAKjD8q2v54Ru
    }
}

Hugo

  hugo:
    container_name: hugo
    image: muninn/hugo-caddy
    restart: unless-stopped
    networks:
      - t2_proxy
    environment:
        - REPO=git.tdehaeze.xyz/tdehaeze/digital-brain
    labels:
      - "traefik.enable=true"
      - "traefik.http.routers.hugo-rtr.entrypoints=https"
      - "traefik.http.routers.hugo-rtr.rule=Host(`brain.$DOMAINNAME`)"
      - "traefik.http.routers.hugo-rtr.tls=true"
      - "traefik.http.routers.hugo-rtr.service=hugo-svc"
      - "traefik.http.services.hugo-svc.loadbalancer.server.port=2015"

Syncthing

  syncthing:
    container_name: syncthing
    image: linuxserver/syncthing
    restart: unless-stopped
    networks:
      - t2_proxy
    environment:
      - PUID=$PUID
      - PGID=$PGID
      - TZ=$TZ
      - UMASK_SET=022
    volumes:
      - $CONFIGDIR/syncthing:/config
      - /srv/storage/Cloud:/Cloud
      - /srv/storage/Cloud/pictures/phone:/Pictures
      - /srv/storage/Cloud/pdfs:/Onyx/Download
      - /srv/storage/Cloud/pdfs-notes:/Onyx/note
      - /srv/storage/Cloud/.stfolder:/Onyx/.stfolder
      - /srv/storage/.password-store:/.password-store
    ports:
      - 22000:22000
      - 21027:21027/udp
    labels:
      - "traefik.enable=true"
      - "traefik.http.routers.syncthing-rtr.entrypoints=https"
      - "traefik.http.routers.syncthing-rtr.rule=Host(`syncthing.$DOMAINNAME`)"
      - "traefik.http.routers.syncthing-rtr.tls=true"
      - "traefik.http.routers.syncthing-rtr.service=syncthing-svc"
      - "traefik.http.routers.syncthing-rtr.middlewares=traefik-auth"
      - "traefik.http.services.syncthing-svc.loadbalancer.server.port=8384"

Miniflux

  miniflux:
    container_name: miniflux
    image: miniflux/miniflux:latest
    restart: unless-stopped
    networks:
      - t2_proxy
      - backend
    depends_on:
      - miniflux_db
    environment:
      - DATABASE_URL=postgres://miniflux:SCJWWXqHwehP7f8g@miniflux_db/miniflux?sslmode=disable
      - RUN_MIGRATIONS=1
      - CREATE_ADMIN=1
      - ADMIN_USERNAME=$MINIFLUX_ADMIN_NAME
      - ADMIN_PASSWORD=$MINIFLUX_ADMIN_PASS
    labels:
      - "traefik.enable=true"
      - "traefik.http.routers.miniflux-rtr.entrypoints=https"
      - "traefik.http.routers.miniflux-rtr.rule=Host(`rss.$DOMAINNAME`)"
      - "traefik.http.routers.miniflux-rtr.tls=true"
      # - 'traefik.http.routers.miniflux-rtr.middlewares=traefik-auth'
      # - 'traefik.http.routers.miniflux-rtr.middlewares=authelia@docker'
      - "traefik.http.routers.miniflux-rtr.service=miniflux-svc"
      - "traefik.http.services.miniflux-svc.loadbalancer.server.port=8080"

  miniflux_db:
    container_name: miniflux_db
    image: postgres:12
    restart: unless-stopped
    networks:
      - backend
    environment:
      - POSTGRES_USER=miniflux
      - POSTGRES_PASSWORD=$MINIFLUX_POSTGRES_PASSWORD
    volumes:
      - $CONFIGDIR/miniflux_db:/var/lib/postgresql/data

Home Assistant

  homeassistant:
    container_name: homeassistant
    image: homeassistant/home-assistant
    restart: unless-stopped
    #networks:
    #  - t2_proxy
    #ports:
    #  - target: 8123
    #    published: 8123
    #    protocol: tcp
    #    mode: host
    privileged: true
    network_mode: host
    volumes:
      - $CONFIGDIR/homeassistant:/config
      - /etc/localtime:/etc/localtime:ro
      - /dev/bus/usb:/dev/bus/usb
        # - ${USERDIR}/docker/shared:/shared
    environment:
      - PUID=$PUID
      - PGID=$PGID
      - TZ=$TZ
    logging:
      options:
        max-size: 10m
    labels:
      - "traefik.enable=true"
      - "traefik.http.routers.homeassistant-rtr.entrypoints=https,http"
      - "traefik.http.routers.homeassistant-rtr.rule=Host(`home.$DOMAINNAME`)"
      - "traefik.http.routers.homeassistant-rtr.tls=true"
      - "traefik.http.routers.homeassistant-rtr.service=homeassistant-svc"
      - "traefik.http.services.homeassistant-svc.loadbalancer.servers.url=http://172.17.0.1:8123"
      #- "traefik.http.services.homeassistant-svc.loadbalancer.server.port=8123"

Jellyfin

  jellyfin:
    container_name: jellyfin
    image: linuxserver/jellyfin
    restart: unless-stopped
    networks:
      - t2_proxy
    volumes:
      - $CONFIGDIR/jellyfin:/config
      - /srv/storage/TVShows:/data/tvshows
      - /srv/storage/LiveMusic:/data/livemusic
      - /srv/storage/Animes:/data/animes
      - /srv/storage/Movies:/data/movies
      - /srv/storage/Music:/data/music
    environment:
      - PUID=$PUID
      - PGID=$PGID
      - TZ=$TZ
    labels:
      - "traefik.enable=true"
      - "traefik.http.routers.jellyfin-rtr.entrypoints=https"
      - "traefik.http.routers.jellyfin-rtr.rule=Host(`jellyfin.$DOMAINNAME`)"
      - "traefik.http.routers.jellyfin-rtr.tls=true"
      - "traefik.http.routers.jellyfin-rtr.service=jellyfin-svc"
      - "traefik.http.services.jellyfin-svc.loadbalancer.server.port=8096"

Filebrowser

  filebrowser:
    container_name: filebrowser
    image: filebrowser/filebrowser
    restart: unless-stopped
    networks:
      - t2_proxy
    volumes:
      - $CONFIGDIR/filebrowser/database.db:/database.db
      - $CONFIGDIR/filebrowser/.filebrowser.json:/.filebrowser.json
      - /srv/storage:/srv/storage
    user: "${PUID}:${PGID}"
    environment:
      - PUID=$PUID
      - PGID=$PGID
      - TZ=$TZ
    labels:
      - "traefik.enable=true"
      - "traefik.http.routers.filebrowser-rtr.entrypoints=https"
      - "traefik.http.routers.filebrowser-rtr.rule=Host(`cloud.$DOMAINNAME`)"
      - "traefik.http.routers.filebrowser-rtr.tls=true"
      - "traefik.http.routers.filebrowser-rtr.service=filebrowser-svc"
      - "traefik.http.services.filebrowser-svc.loadbalancer.server.port=80"

.filebrowser.json

{
  "port": 80,
  "baseURL": "",
  "address": "",
  "log": "stdout",
  "database": "/database.db",
  "root": "/srv/storage"
}

Scrutiny

  scrutiny:
    container_name: scrutiny
    image: linuxserver/scrutiny
    restart: unless-stopped
    networks:
      - backend
    cap_add:
      - SYS_RAWIO
      - SYS_ADMIN
    environment:
      - PUID=$PUID
      - PGID=$PGID
      - SCRUTINY_API_ENDPOINT=http://localhost:8080
      - TZ=$TZ
      - SCRUTINY_WEB=true
      - SCRUTINY_COLLECTOR=true
    volumes:
      - $CONFIGDIR/scrutiny:/config
      - /run/udev:/run/udev:ro
    devices:
      - /dev/sda:/dev/sda
      - /dev/sdb:/dev/sdb
      - /dev/sdc:/dev/sdc
      - /dev/sdd:/dev/sdd
      - /dev/nvme0n1:/dev/nvme0n1
    ports:
      - 8089:8080

Guacamole

  guacamole:
    image: oznu/guacamole
    container_name: guacamole
    restart: unless-stopped
    networks:
      - t2_proxy
      - backend
    environment:
      - PUID=$PUID
      - PGID=$PGID
      - TZ=$TZ
    volumes:
      - $CONFIGDIR/guacamole:/config
    labels:
      - "traefik.enable=true"
      - "traefik.http.routers.guacamole-rtr.entrypoints=https"
      - "traefik.http.routers.guacamole-rtr.rule=Host(`guacamole.$DOMAINNAME`)"
      - "traefik.http.routers.guacamole-rtr.tls=true"
      - "traefik.http.routers.guacamole-rtr.service=guacamole-svc"
      - "traefik.http.services.guacamole-svc.loadbalancer.server.port=8080"

Transmission

  transmission-openvpn:
    container_name: transmission
    image: haugene/transmission-openvpn:2.13
    restart: unless-stopped
    networks:
      - t2_proxy
      - backend
    environment:
      - PUID=$PUID
      - PGID=$PGID
      - CREATE_TUN_DEVICE=true
      - ENABLE_UFW=true
      - WEBPROXY_ENABLED=false
      - TRANSMISSION_WEB_UI=combustion
      - OPENVPN_PROVIDER=NORDVPN
      - OPENVPN_USERNAME=$NORDVPN_NAME
      - OPENVPN_PASSWORD=$NORDVPN_PASS
      - NORDVPN_COUNTRY=FR
      - NORDVPN_CATEGORY=P2P
      - NORDVPN_PROTOCOL=tcp
      - LOCAL_NETWORK=192.168.0.0/16
    volumes:
      - /srv/storage/Downloads:/data
      - /etc/localtime:/etc/localtime:ro
    cap_add:
      - NET_ADMIN
    ports:
      - 9091:9091
      - 51413:51413
      - 51413:51413/udp
    labels:
      - "traefik.enable=true"
      - "traefik.http.routers.transmission-rtr.entrypoints=https"
      - "traefik.http.routers.transmission-rtr.rule=Host(`torrent.$DOMAINNAME`)"
      - "traefik.http.routers.transmission-rtr.tls=true"
      - "traefik.http.routers.transmission-rtr.service=transmission-svc"
      - "traefik.http.routers.transmission-rtr.middlewares=traefik-auth"
      - "traefik.http.services.transmission-svc.loadbalancer.server.port=9091"

Aria2 - Daemon

  aria2:
    container_name: aria2
    image: opengg/aria2
    restart: unless-stopped
    networks:
      - t2_proxy
    environment:
      - PUID=$PUID
      - PGID=$PGID
    user: "${PUID}:${PGID}"
    volumes:
      - $CONFIGDIR/aria2:/config
      - /srv/storage/Downloads:/downloads
    ports:
      - 6800:6800

aria2.conf

save-session=/config/aria2.session
input-file=/config/aria2.session
save-session-interval=60

dir=/downloads

file-allocation=prealloc
disk-cache=128M

enable-rpc=true
rpc-listen-port=6800
rpc-allow-origin-all=true
rpc-listen-all=true

rpc-secret=<<get-password(passname="nas/aria2")>>

auto-file-renaming=false

max-connection-per-server=16
min-split-size=1M
split=16

Aria2 - Web UI

  aria2-ui:
    container_name: aria2-ui
    image: p3terx/ariang
    restart: unless-stopped
    networks:
      - t2_proxy
    environment:
      - PUID=$PUID
      - PGID=$PGID
    ports:
      - 6880:6880
    labels:
      - "traefik.enable=true"
      - "traefik.http.routers.aria2-rtr.entrypoints=http"
      - "traefik.http.routers.aria2-rtr.rule=Host(`dl.$DOMAINNAME`)"
      - "traefik.http.routers.aria2-rtr.tls=false"
      - "traefik.http.routers.aria2-rtr.service=aria2-svc"
      - "traefik.http.routers.aria2-rtr.middlewares=traefik-auth"
      - "traefik.http.services.aria2-svc.loadbalancer.server.port=6880"

Deemix

  deemix:
    image: registry.gitlab.com/bockiii/deemix-docker
    container_name: deemix
    restart: unless-stopped
    networks:
      - t2_proxy
    volumes:
      - /srv/storage/Downloads:/downloads
      - $CONFIGDIR/deemix:/config
    environment:
      - TZ=$TZ
      - PUID=$PUID
      - PGID=$PGID
      - ARL=$DEEMIX_ARL
    labels:
      - "traefik.enable=true"
      - "traefik.http.routers.deemix-rtr.entrypoints=https"
      - "traefik.http.routers.deemix-rtr.rule=Host(`deemix.$DOMAINNAME`)"
      - "traefik.http.routers.deemix-rtr.tls=true"
      - "traefik.http.routers.deemix-rtr.service=deemix-svc"
      - "traefik.http.routers.deemix-rtr.middlewares=traefik-auth"
      - "traefik.http.services.deemix-svc.loadbalancer.server.port=6595"

.env - Variable used for Docker Compose

PUID=1000
PGID=1000
TZ=Europe/Paris
CONFIGDIR=/home/thomas/docker/config
DOMAINNAME=tdehaeze.xyz
CLOUDFLARE_EMAIL=dehaeze.thomas@gmail.com
CLOUDFLARE_API_KEY=<<get-password(passname="nas/cloudflare_api_key")>>
MINIFLUX_ADMIN_NAME=tdehaeze
MINIFLUX_ADMIN_PASS=<<get-password(passname="nas/miniflux_admin_pass")>>
MINIFLUX_POSTGRES_PASSWORD=<<get-password(passname="nas/miniflux_postgres_pass")>>
RESTIC_PASSWORD=<<get-password(passname="nas/restic_pass")>>
GITEA_DB_MYSQL_ROOT_PASSWORD=<<get-password(passname="nas/gitea_mysql_root_pass")>>
GITEA_DB_MYSQL_PASSWORD=<<get-password(passname="nas/gitea_mysql_pass")>>
GITEA_SSH_PORT=2222
NORDVPN_NAME=dehaeze.thomas@gmail.com
NORDVPN_PASS=<<get-password(passname="nordvpn.com/dehaeze.thomas@gmail.com")>>
GOTIFY_DEFAULTUSER_NAME=tdehaeze
GOTIFY_DEFAULTUSER_PASS=<<get-password(passname="nas/gotify_pass")>>
GUACAMOLE_POSTGRES_PASSWORD=<<get-password(passname="nas/guacamole_postgres_pass")>>
DEEMIX_ARL=<<get-password(passname="nas/deemix_arl")>>

Cron Jobs

Caddy Update

Create a script ~/cron/caddy_update.sh with:

docker exec caddy /bin/sh -c "cd /srv/www && echo -e \"Update repo $(date)\" && git submodule update --recursive --remote --merge"

Type crontab -e and add this line:

*/5 * * * * /home/thomas/cron/caddy_update.sh >> /home/thomas/cron/caddy_update.log 2>&1