bibliography: => #+BIBLIOGRAPHY: here
This commit is contained in:
@@ -8,7 +8,7 @@ Tags
|
||||
: [Stewart Platforms]({{< relref "stewart_platforms" >}}), [Vibration Isolation]({{< relref "vibration_isolation" >}})
|
||||
|
||||
Reference
|
||||
: ([Spanos, Rahman, and Blackwood 1995](#orgfa35a11))
|
||||
: ([Spanos, Rahman, and Blackwood 1995](#org2800cc5))
|
||||
|
||||
Author(s)
|
||||
: Spanos, J., Rahman, Z., & Blackwood, G.
|
||||
@@ -16,14 +16,14 @@ Author(s)
|
||||
Year
|
||||
: 1995
|
||||
|
||||
**Stewart Platform** (Figure [1](#org04a652d)):
|
||||
**Stewart Platform** (Figure [1](#orgcac471d)):
|
||||
|
||||
- Voice Coil
|
||||
- Flexible joints (cross-blades)
|
||||
- Force Sensors
|
||||
- Cubic Configuration
|
||||
|
||||
<a id="org04a652d"></a>
|
||||
<a id="orgcac471d"></a>
|
||||
|
||||
{{< figure src="/ox-hugo/spanos95_stewart_platform.png" caption="Figure 1: Stewart Platform" >}}
|
||||
|
||||
@@ -41,7 +41,7 @@ After redesign of the struts:
|
||||
- low frequency zero at 2.6Hz but non-minimum phase (not explained).
|
||||
Small viscous damping material in the cross blade flexures made the zero minimum phase again.
|
||||
|
||||
<a id="org0b2816d"></a>
|
||||
<a id="org5cb89c4"></a>
|
||||
|
||||
{{< figure src="/ox-hugo/spanos95_iff_plant.png" caption="Figure 2: Experimentally measured transfer function from voice coil drive voltage to collocated load cell output voltage" >}}
|
||||
|
||||
@@ -52,13 +52,14 @@ The controller used consisted of:
|
||||
- first order lag filter to provide adequate phase margin at the low frequency crossover
|
||||
- a first order high pass filter to attenuate the excess gain resulting from the low frequency zero
|
||||
|
||||
The results in terms of transmissibility are shown in Figure [3](#org3083c42).
|
||||
The results in terms of transmissibility are shown in Figure [3](#orgd8726b9).
|
||||
|
||||
<a id="org3083c42"></a>
|
||||
<a id="orgd8726b9"></a>
|
||||
|
||||
{{< figure src="/ox-hugo/spanos95_results.png" caption="Figure 3: Experimentally measured Frobenius norm of the 6-axis transmissibility" >}}
|
||||
|
||||
|
||||
|
||||
## Bibliography {#bibliography}
|
||||
|
||||
<a id="orgfa35a11"></a>Spanos, J., Z. Rahman, and G. Blackwood. 1995. “A Soft 6-Axis Active Vibration Isolator.” In _Proceedings of 1995 American Control Conference - ACC’95_, nil. <https://doi.org/10.1109/acc.1995.529280>.
|
||||
<a id="org2800cc5"></a>Spanos, J., Z. Rahman, and G. Blackwood. 1995. “A Soft 6-Axis Active Vibration Isolator.” In _Proceedings of 1995 American Control Conference - ACC’95_, nil. <https://doi.org/10.1109/acc.1995.529280>.
|
||||
|
Reference in New Issue
Block a user