1077 lines
31 KiB
Matlab
1077 lines
31 KiB
Matlab
%% Clear Workspace and Close figures
|
|
clear; close all; clc;
|
|
|
|
%% Intialize Laplace variable
|
|
s = zpk('s');
|
|
|
|
freqs = logspace(-1, 2, 1000);
|
|
|
|
% Gravimeter Model - Parameters
|
|
% <<sec:gravimeter_model>>
|
|
|
|
|
|
open('gravimeter.slx')
|
|
|
|
|
|
|
|
% The model of the gravimeter is schematically shown in Figure [[fig:gravimeter_model]].
|
|
|
|
% #+name: fig:gravimeter_model
|
|
% #+caption: Model of the gravimeter
|
|
% [[file:figs/gravimeter_model.png]]
|
|
|
|
% #+name: fig:leg_model
|
|
% #+caption: Model of the struts
|
|
% [[file:figs/leg_model.png]]
|
|
|
|
% The parameters used for the simulation are the following:
|
|
|
|
l = 1.0; % Length of the mass [m]
|
|
h = 1.7; % Height of the mass [m]
|
|
|
|
la = l/2; % Position of Act. [m]
|
|
ha = h/2; % Position of Act. [m]
|
|
|
|
m = 400; % Mass [kg]
|
|
I = 115; % Inertia [kg m^2]
|
|
|
|
k = 15e3; % Actuator Stiffness [N/m]
|
|
c = 2e1; % Actuator Damping [N/(m/s)]
|
|
|
|
deq = 0.2; % Length of the actuators [m]
|
|
|
|
g = 0; % Gravity [m/s2]
|
|
|
|
% System Identification
|
|
% <<sec:gravimeter_identification>>
|
|
|
|
|
|
%% Name of the Simulink File
|
|
mdl = 'gravimeter';
|
|
|
|
%% Input/Output definition
|
|
clear io; io_i = 1;
|
|
io(io_i) = linio([mdl, '/F1'], 1, 'openinput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/F2'], 1, 'openinput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/F3'], 1, 'openinput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_side'], 1, 'openoutput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_side'], 2, 'openoutput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_top'], 1, 'openoutput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_top'], 2, 'openoutput'); io_i = io_i + 1;
|
|
|
|
G = linearize(mdl, io);
|
|
G.InputName = {'F1', 'F2', 'F3'};
|
|
G.OutputName = {'Ax1', 'Ay1', 'Ax2', 'Ay2'};
|
|
|
|
|
|
|
|
% #+name: fig:gravimeter_plant_schematic
|
|
% #+caption: Schematic of the gravimeter plant
|
|
% #+RESULTS:
|
|
% [[file:figs/gravimeter_plant_schematic.png]]
|
|
|
|
% We can check the poles of the plant:
|
|
|
|
pole(G)
|
|
|
|
|
|
|
|
% #+RESULTS:
|
|
% | -0.12243+13.551i |
|
|
% | -0.12243-13.551i |
|
|
% | -0.05+8.6601i |
|
|
% | -0.05-8.6601i |
|
|
% | -0.0088785+3.6493i |
|
|
% | -0.0088785-3.6493i |
|
|
|
|
% As expected, the plant as 6 states (2 translations + 1 rotation)
|
|
|
|
size(G)
|
|
|
|
|
|
|
|
% #+RESULTS:
|
|
% : State-space model with 4 outputs, 3 inputs, and 6 states.
|
|
|
|
% The bode plot of all elements of the plant are shown in Figure [[fig:open_loop_tf]].
|
|
|
|
|
|
figure;
|
|
tiledlayout(4, 3, 'TileSpacing', 'None', 'Padding', 'None');
|
|
|
|
for out_i = 1:4
|
|
for in_i = 1:3
|
|
nexttile;
|
|
plot(freqs, abs(squeeze(freqresp(G(out_i,in_i), freqs, 'Hz'))), '-');
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
xlim([1e-1, 2e1]); ylim([1e-4, 1e0]);
|
|
|
|
if in_i == 1
|
|
ylabel('Amplitude [m/N]')
|
|
else
|
|
set(gca, 'YTickLabel',[]);
|
|
end
|
|
|
|
if out_i == 4
|
|
xlabel('Frequency [Hz]')
|
|
else
|
|
set(gca, 'XTickLabel',[]);
|
|
end
|
|
end
|
|
end
|
|
|
|
|
|
|
|
% #+name: fig:gravimeter_decouple_jacobian
|
|
% #+caption: Decoupled plant $\bm{G}_x$ using the Jacobian matrix $J$
|
|
% #+RESULTS:
|
|
% [[file:figs/gravimeter_decouple_jacobian.png]]
|
|
|
|
% The Jacobian corresponding to the sensors and actuators are defined below:
|
|
|
|
Ja = [1 0 -h/2
|
|
0 1 l/2
|
|
1 0 h/2
|
|
0 1 0];
|
|
|
|
Jt = [1 0 -ha
|
|
0 1 la
|
|
0 1 -la];
|
|
|
|
|
|
|
|
% And the plant $\bm{G}_x$ is computed:
|
|
|
|
Gx = pinv(Ja)*G*pinv(Jt');
|
|
Gx.InputName = {'Fx', 'Fy', 'Mz'};
|
|
Gx.OutputName = {'Dx', 'Dy', 'Rz'};
|
|
|
|
size(Gx)
|
|
|
|
|
|
|
|
% #+RESULTS:
|
|
% : size(Gx)
|
|
% : State-space model with 3 outputs, 3 inputs, and 6 states.
|
|
|
|
% The diagonal and off-diagonal elements of $G_x$ are shown in Figure [[fig:gravimeter_jacobian_plant]].
|
|
|
|
|
|
figure;
|
|
|
|
% Magnitude
|
|
hold on;
|
|
for i_in = 1:3
|
|
for i_out = [1:i_in-1, i_in+1:3]
|
|
plot(freqs, abs(squeeze(freqresp(Gx(i_out, i_in), freqs, 'Hz'))), 'color', [0,0,0,0.2], ...
|
|
'HandleVisibility', 'off');
|
|
end
|
|
end
|
|
plot(freqs, abs(squeeze(freqresp(Gx(i_out, i_in), freqs, 'Hz'))), 'color', [0,0,0,0.2], ...
|
|
'DisplayName', '$G_x(i,j)\ i \neq j$');
|
|
set(gca,'ColorOrderIndex',1)
|
|
for i_in_out = 1:3
|
|
plot(freqs, abs(squeeze(freqresp(Gx(i_in_out, i_in_out), freqs, 'Hz'))), 'DisplayName', sprintf('$G_x(%d,%d)$', i_in_out, i_in_out));
|
|
end
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
xlabel('Frequency [Hz]'); ylabel('Magnitude');
|
|
legend('location', 'southeast');
|
|
ylim([1e-8, 1e0]);
|
|
|
|
% Decoupling using the SVD
|
|
% <<sec:gravimeter_svd_decoupling>>
|
|
|
|
% In order to decouple the plant using the SVD, first a real approximation of the plant transfer function matrix as the crossover frequency is required.
|
|
|
|
% Let's compute a real approximation of the complex matrix $H_1$ which corresponds to the the transfer function $G(j\omega_c)$ from forces applied by the actuators to the measured acceleration of the top platform evaluated at the frequency $\omega_c$.
|
|
|
|
wc = 2*pi*10; % Decoupling frequency [rad/s]
|
|
|
|
H1 = evalfr(G, j*wc);
|
|
|
|
|
|
|
|
% The real approximation is computed as follows:
|
|
|
|
D = pinv(real(H1'*H1));
|
|
H1 = pinv(D*real(H1'*diag(exp(j*angle(diag(H1*D*H1.'))/2))));
|
|
|
|
|
|
|
|
% #+caption: Real approximate of $G$ at the decoupling frequency $\omega_c$
|
|
% #+RESULTS:
|
|
% | 0.0092 | -0.0039 | 0.0039 |
|
|
% | -0.0039 | 0.0048 | 0.00028 |
|
|
% | -0.004 | 0.0038 | -0.0038 |
|
|
% | 8.4e-09 | 0.0025 | 0.0025 |
|
|
|
|
|
|
% Now, the Singular Value Decomposition of $H_1$ is performed:
|
|
% \[ H_1 = U \Sigma V^H \]
|
|
|
|
|
|
[U,S,V] = svd(H1);
|
|
|
|
|
|
|
|
% #+name: fig:gravimeter_decouple_svd
|
|
% #+caption: Decoupled plant $\bm{G}_{SVD}$ using the Singular Value Decomposition
|
|
% #+RESULTS:
|
|
% [[file:figs/gravimeter_decouple_svd.png]]
|
|
|
|
% The decoupled plant is then:
|
|
% \[ \bm{G}_{SVD}(s) = U^{-1} \bm{G}(s) V^{-H} \]
|
|
|
|
|
|
Gsvd = inv(U)*G*inv(V');
|
|
|
|
size(Gsvd)
|
|
|
|
|
|
|
|
% #+RESULTS:
|
|
% : size(Gsvd)
|
|
% : State-space model with 4 outputs, 3 inputs, and 6 states.
|
|
|
|
% The 4th output (corresponding to the null singular value) is discarded, and we only keep the $3 \times 3$ plant:
|
|
|
|
Gsvd = Gsvd(1:3, 1:3);
|
|
|
|
|
|
|
|
% The diagonal and off-diagonal elements of the "SVD" plant are shown in Figure [[fig:gravimeter_svd_plant]].
|
|
|
|
figure;
|
|
|
|
% Magnitude
|
|
hold on;
|
|
for i_in = 1:3
|
|
for i_out = [1:i_in-1, i_in+1:3]
|
|
plot(freqs, abs(squeeze(freqresp(Gsvd(i_out, i_in), freqs, 'Hz'))), 'color', [0,0,0,0.2], ...
|
|
'HandleVisibility', 'off');
|
|
end
|
|
end
|
|
plot(freqs, abs(squeeze(freqresp(Gsvd(i_out, i_in), freqs, 'Hz'))), 'color', [0,0,0,0.2], ...
|
|
'DisplayName', '$G_x(i,j)\ i \neq j$');
|
|
set(gca,'ColorOrderIndex',1)
|
|
for i_in_out = 1:3
|
|
plot(freqs, abs(squeeze(freqresp(Gsvd(i_in_out, i_in_out), freqs, 'Hz'))), 'DisplayName', sprintf('$G_x(%d,%d)$', i_in_out, i_in_out));
|
|
end
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
xlabel('Frequency [Hz]'); ylabel('Magnitude');
|
|
legend('location', 'southwest', 'FontSize', 8);
|
|
ylim([1e-8, 1e0]);
|
|
|
|
% Verification of the decoupling using the "Gershgorin Radii"
|
|
% <<sec:gravimeter_gershgorin_radii>>
|
|
|
|
% The "Gershgorin Radii" is computed for the coupled plant $G(s)$, for the "Jacobian plant" $G_x(s)$ and the "SVD Decoupled Plant" $G_{SVD}(s)$:
|
|
|
|
% The "Gershgorin Radii" of a matrix $S$ is defined by:
|
|
% \[ \zeta_i(j\omega) = \frac{\sum\limits_{j\neq i}|S_{ij}(j\omega)|}{|S_{ii}(j\omega)|} \]
|
|
|
|
|
|
% Gershgorin Radii for the coupled plant:
|
|
Gr_coupled = zeros(length(freqs), size(G,2));
|
|
H = abs(squeeze(freqresp(G, freqs, 'Hz')));
|
|
for out_i = 1:size(G,2)
|
|
Gr_coupled(:, out_i) = squeeze((sum(H(out_i,:,:)) - H(out_i,out_i,:))./H(out_i, out_i, :));
|
|
end
|
|
|
|
% Gershgorin Radii for the decoupled plant using SVD:
|
|
Gr_decoupled = zeros(length(freqs), size(Gsvd,2));
|
|
H = abs(squeeze(freqresp(Gsvd, freqs, 'Hz')));
|
|
for out_i = 1:size(Gsvd,2)
|
|
Gr_decoupled(:, out_i) = squeeze((sum(H(out_i,:,:)) - H(out_i,out_i,:))./H(out_i, out_i, :));
|
|
end
|
|
|
|
% Gershgorin Radii for the decoupled plant using the Jacobian:
|
|
Gr_jacobian = zeros(length(freqs), size(Gx,2));
|
|
H = abs(squeeze(freqresp(Gx, freqs, 'Hz')));
|
|
for out_i = 1:size(Gx,2)
|
|
Gr_jacobian(:, out_i) = squeeze((sum(H(out_i,:,:)) - H(out_i,out_i,:))./H(out_i, out_i, :));
|
|
end
|
|
|
|
figure;
|
|
hold on;
|
|
plot(freqs, Gr_coupled(:,1), 'DisplayName', 'Coupled');
|
|
plot(freqs, Gr_decoupled(:,1), 'DisplayName', 'SVD');
|
|
plot(freqs, Gr_jacobian(:,1), 'DisplayName', 'Jacobian');
|
|
for in_i = 2:3
|
|
set(gca,'ColorOrderIndex',1)
|
|
plot(freqs, Gr_coupled(:,in_i), 'HandleVisibility', 'off');
|
|
set(gca,'ColorOrderIndex',2)
|
|
plot(freqs, Gr_decoupled(:,in_i), 'HandleVisibility', 'off');
|
|
set(gca,'ColorOrderIndex',3)
|
|
plot(freqs, Gr_jacobian(:,in_i), 'HandleVisibility', 'off');
|
|
end
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
hold off;
|
|
xlabel('Frequency (Hz)'); ylabel('Gershgorin Radii')
|
|
legend('location', 'southwest');
|
|
ylim([1e-4, 1e2]);
|
|
|
|
% Verification of the decoupling using the "Relative Gain Array"
|
|
% <<sec:gravimeter_rga>>
|
|
|
|
% The relative gain array (RGA) is defined as:
|
|
% \begin{equation}
|
|
% \Lambda\big(G(s)\big) = G(s) \times \big( G(s)^{-1} \big)^T
|
|
% \end{equation}
|
|
% where $\times$ denotes an element by element multiplication and $G(s)$ is an $n \times n$ square transfer matrix.
|
|
|
|
% The obtained RGA elements are shown in Figure [[fig:gravimeter_rga]].
|
|
|
|
|
|
% Relative Gain Array for the decoupled plant using SVD:
|
|
RGA_svd = zeros(length(freqs), size(Gsvd,1), size(Gsvd,2));
|
|
Gsvd_inv = inv(Gsvd);
|
|
for f_i = 1:length(freqs)
|
|
RGA_svd(f_i, :, :) = abs(evalfr(Gsvd, j*2*pi*freqs(f_i)).*evalfr(Gsvd_inv, j*2*pi*freqs(f_i))');
|
|
end
|
|
|
|
% Relative Gain Array for the decoupled plant using the Jacobian:
|
|
RGA_x = zeros(length(freqs), size(Gx,1), size(Gx,2));
|
|
Gx_inv = inv(Gx);
|
|
for f_i = 1:length(freqs)
|
|
RGA_x(f_i, :, :) = abs(evalfr(Gx, j*2*pi*freqs(f_i)).*evalfr(Gx_inv, j*2*pi*freqs(f_i))');
|
|
end
|
|
|
|
figure;
|
|
tiledlayout(1, 2, 'TileSpacing', 'None', 'Padding', 'None');
|
|
|
|
ax1 = nexttile;
|
|
hold on;
|
|
for i_in = 1:3
|
|
for i_out = [1:i_in-1, i_in+1:3]
|
|
plot(freqs, RGA_svd(:, i_out, i_in), '--', 'color', [0 0 0 0.2], ...
|
|
'HandleVisibility', 'off');
|
|
end
|
|
end
|
|
plot(freqs, RGA_svd(:, 1, 2), '--', 'color', [0 0 0 0.2], ...
|
|
'DisplayName', '$RGA_{SVD}(i,j),\ i \neq j$');
|
|
|
|
plot(freqs, RGA_svd(:, 1, 1), 'k-', ...
|
|
'DisplayName', '$RGA_{SVD}(i,i)$');
|
|
for ch_i = 1:3
|
|
plot(freqs, RGA_svd(:, ch_i, ch_i), 'k-', ...
|
|
'HandleVisibility', 'off');
|
|
end
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
ylabel('Magnitude'); xlabel('Frequency [Hz]');
|
|
legend('location', 'southwest');
|
|
|
|
ax2 = nexttile;
|
|
hold on;
|
|
for i_in = 1:3
|
|
for i_out = [1:i_in-1, i_in+1:3]
|
|
plot(freqs, RGA_x(:, i_out, i_in), '--', 'color', [0 0 0 0.2], ...
|
|
'HandleVisibility', 'off');
|
|
end
|
|
end
|
|
plot(freqs, RGA_x(:, 1, 2), '--', 'color', [0 0 0 0.2], ...
|
|
'DisplayName', '$RGA_{X}(i,j),\ i \neq j$');
|
|
|
|
plot(freqs, RGA_x(:, 1, 1), 'k-', ...
|
|
'DisplayName', '$RGA_{X}(i,i)$');
|
|
for ch_i = 1:3
|
|
plot(freqs, RGA_x(:, ch_i, ch_i), 'k-', ...
|
|
'HandleVisibility', 'off');
|
|
end
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
xlabel('Frequency [Hz]'); set(gca, 'YTickLabel',[]);
|
|
legend('location', 'southwest');
|
|
|
|
linkaxes([ax1,ax2],'y');
|
|
ylim([1e-5, 1e1]);
|
|
|
|
|
|
|
|
% #+name: fig:gravimeter_rga
|
|
% #+caption: Obtained norm of RGA elements for the SVD decoupled plant and the Jacobian decoupled plant
|
|
% #+RESULTS:
|
|
% [[file:figs/gravimeter_rga.png]]
|
|
|
|
% The RGA-number is also a measure of diagonal dominance:
|
|
% \begin{equation}
|
|
% \text{RGA-number} = \| \Lambda(G) - I \|_\text{sum}
|
|
% \end{equation}
|
|
|
|
|
|
% Relative Gain Array for the decoupled plant using SVD:
|
|
RGA_svd = zeros(size(Gsvd,1), size(Gsvd,2), length(freqs));
|
|
Gsvd_inv = inv(Gsvd);
|
|
for f_i = 1:length(freqs)
|
|
RGA_svd(:, :, f_i) = abs(evalfr(Gsvd, j*2*pi*freqs(f_i)).*evalfr(Gsvd_inv, j*2*pi*freqs(f_i))');
|
|
end
|
|
|
|
% Relative Gain Array for the decoupled plant using the Jacobian:
|
|
RGA_x = zeros(size(Gx,1), size(Gx,2), length(freqs));
|
|
Gx_inv = inv(Gx);
|
|
for f_i = 1:length(freqs)
|
|
RGA_x(:, :, f_i) = abs(evalfr(Gx, j*2*pi*freqs(f_i)).*evalfr(Gx_inv, j*2*pi*freqs(f_i))');
|
|
end
|
|
|
|
RGA_num_svd = squeeze(sum(sum(RGA_svd - eye(3))));
|
|
RGA_num_x = squeeze(sum(sum(RGA_x - eye(3))));
|
|
|
|
figure;
|
|
hold on;
|
|
plot(freqs, RGA_num_svd)
|
|
plot(freqs, RGA_num_x)
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
xlabel('Frequency [Hz]'); ylabel('RGA-Number');
|
|
|
|
% Obtained Decoupled Plants
|
|
% <<sec:gravimeter_decoupled_plant>>
|
|
|
|
% The bode plot of the diagonal and off-diagonal elements of $G_{SVD}$ are shown in Figure [[fig:gravimeter_decoupled_plant_svd]].
|
|
|
|
|
|
figure;
|
|
tiledlayout(3, 1, 'TileSpacing', 'None', 'Padding', 'None');
|
|
|
|
% Magnitude
|
|
ax1 = nexttile([2, 1]);
|
|
hold on;
|
|
for i_in = 1:3
|
|
for i_out = [1:i_in-1, i_in+1:3]
|
|
plot(freqs, abs(squeeze(freqresp(Gsvd(i_out, i_in), freqs, 'Hz'))), 'color', [0,0,0,0.2], ...
|
|
'HandleVisibility', 'off');
|
|
end
|
|
end
|
|
plot(freqs, abs(squeeze(freqresp(Gsvd(1, 2), freqs, 'Hz'))), 'color', [0,0,0,0.5], ...
|
|
'DisplayName', '$G_{SVD}(i,j),\ i \neq j$');
|
|
set(gca,'ColorOrderIndex',1)
|
|
for ch_i = 1:3
|
|
plot(freqs, abs(squeeze(freqresp(Gsvd(ch_i, ch_i), freqs, 'Hz'))), ...
|
|
'DisplayName', sprintf('$G_{SVD}(%i,%i)$', ch_i, ch_i));
|
|
end
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
ylabel('Magnitude'); set(gca, 'XTickLabel',[]);
|
|
legend('location', 'southwest');
|
|
ylim([1e-8, 1e0])
|
|
|
|
% Phase
|
|
ax2 = nexttile;
|
|
hold on;
|
|
for ch_i = 1:3
|
|
plot(freqs, 180/pi*angle(squeeze(freqresp(Gsvd(ch_i, ch_i), freqs, 'Hz'))));
|
|
end
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'lin');
|
|
ylabel('Phase [deg]'); xlabel('Frequency [Hz]');
|
|
ylim([-180, 180]);
|
|
yticks([-180:90:360]);
|
|
|
|
linkaxes([ax1,ax2],'x');
|
|
|
|
|
|
|
|
% #+name: fig:gravimeter_decoupled_plant_svd
|
|
% #+caption: Decoupled Plant using SVD
|
|
% #+RESULTS:
|
|
% [[file:figs/gravimeter_decoupled_plant_svd.png]]
|
|
|
|
% Similarly, the bode plots of the diagonal elements and off-diagonal elements of the decoupled plant $G_x(s)$ using the Jacobian are shown in Figure [[fig:gravimeter_decoupled_plant_jacobian]].
|
|
|
|
|
|
figure;
|
|
tiledlayout(3, 1, 'TileSpacing', 'None', 'Padding', 'None');
|
|
|
|
% Magnitude
|
|
ax1 = nexttile([2, 1]);
|
|
hold on;
|
|
for i_in = 1:3
|
|
for i_out = [1:i_in-1, i_in+1:3]
|
|
plot(freqs, abs(squeeze(freqresp(Gx(i_out, i_in), freqs, 'Hz'))), 'color', [0,0,0,0.2], ...
|
|
'HandleVisibility', 'off');
|
|
end
|
|
end
|
|
plot(freqs, abs(squeeze(freqresp(Gx(1, 2), freqs, 'Hz'))), 'color', [0,0,0,0.5], ...
|
|
'DisplayName', '$G_x(i,j),\ i \neq j$');
|
|
set(gca,'ColorOrderIndex',1)
|
|
plot(freqs, abs(squeeze(freqresp(Gx(1, 1), freqs, 'Hz'))), 'DisplayName', '$G_x(1,1) = A_x/F_x$');
|
|
plot(freqs, abs(squeeze(freqresp(Gx(2, 2), freqs, 'Hz'))), 'DisplayName', '$G_x(2,2) = A_y/F_y$');
|
|
plot(freqs, abs(squeeze(freqresp(Gx(3, 3), freqs, 'Hz'))), 'DisplayName', '$G_x(3,3) = R_z/M_z$');
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
ylabel('Magnitude'); set(gca, 'XTickLabel',[]);
|
|
legend('location', 'southwest');
|
|
ylim([1e-8, 1e0])
|
|
|
|
% Phase
|
|
ax2 = nexttile;
|
|
hold on;
|
|
plot(freqs, 180/pi*angle(squeeze(freqresp(Gx(1, 1), freqs, 'Hz'))));
|
|
plot(freqs, 180/pi*angle(squeeze(freqresp(Gx(2, 2), freqs, 'Hz'))));
|
|
plot(freqs, 180/pi*angle(squeeze(freqresp(Gx(3, 3), freqs, 'Hz'))));
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'lin');
|
|
ylabel('Phase [deg]'); xlabel('Frequency [Hz]');
|
|
ylim([-180, 180]);
|
|
yticks([0:45:360]);
|
|
|
|
linkaxes([ax1,ax2],'x');
|
|
|
|
|
|
|
|
% #+name: fig:svd_control_gravimeter
|
|
% #+caption: Control Diagram for the SVD control
|
|
% #+RESULTS:
|
|
% [[file:figs/svd_control_gravimeter.png]]
|
|
|
|
|
|
% We choose the controller to be a low pass filter:
|
|
% \[ K_c(s) = \frac{G_0}{1 + \frac{s}{\omega_0}} \]
|
|
|
|
% $G_0$ is tuned such that the crossover frequency corresponding to the diagonal terms of the loop gain is equal to $\omega_c$
|
|
|
|
|
|
wc = 2*pi*10; % Crossover Frequency [rad/s]
|
|
w0 = 2*pi*0.1; % Controller Pole [rad/s]
|
|
|
|
K_cen = diag(1./diag(abs(evalfr(Gx, j*wc))))*(1/abs(evalfr(1/(1 + s/w0), j*wc)))/(1 + s/w0);
|
|
L_cen = K_cen*Gx;
|
|
G_cen = feedback(G, pinv(Jt')*K_cen*pinv(Ja));
|
|
|
|
K_svd = diag(1./diag(abs(evalfr(Gsvd, j*wc))))*(1/abs(evalfr(1/(1 + s/w0), j*wc)))/(1 + s/w0);
|
|
L_svd = K_svd*Gsvd;
|
|
U_inv = inv(U);
|
|
G_svd = feedback(G, inv(V')*K_svd*U_inv(1:3, :));
|
|
|
|
|
|
|
|
% The obtained diagonal elements of the loop gains are shown in Figure [[fig:gravimeter_comp_loop_gain_diagonal]].
|
|
|
|
|
|
figure;
|
|
tiledlayout(3, 1, 'TileSpacing', 'None', 'Padding', 'None');
|
|
|
|
% Magnitude
|
|
ax1 = nexttile([2, 1]);
|
|
hold on;
|
|
plot(freqs, abs(squeeze(freqresp(L_svd(1, 1), freqs, 'Hz'))), 'DisplayName', '$L_{SVD}(i,i)$');
|
|
for i_in_out = 2:3
|
|
set(gca,'ColorOrderIndex',1)
|
|
plot(freqs, abs(squeeze(freqresp(L_svd(i_in_out, i_in_out), freqs, 'Hz'))), 'HandleVisibility', 'off');
|
|
end
|
|
|
|
set(gca,'ColorOrderIndex',2)
|
|
plot(freqs, abs(squeeze(freqresp(L_cen(1, 1), freqs, 'Hz'))), ...
|
|
'DisplayName', '$L_{J}(i,i)$');
|
|
for i_in_out = 2:3
|
|
set(gca,'ColorOrderIndex',2)
|
|
plot(freqs, abs(squeeze(freqresp(L_cen(i_in_out, i_in_out), freqs, 'Hz'))), 'HandleVisibility', 'off');
|
|
end
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
ylabel('Magnitude'); set(gca, 'XTickLabel',[]);
|
|
legend('location', 'northwest');
|
|
ylim([5e-2, 2e3])
|
|
|
|
% Phase
|
|
ax2 = nexttile;
|
|
hold on;
|
|
for i_in_out = 1:3
|
|
set(gca,'ColorOrderIndex',1)
|
|
plot(freqs, 180/pi*angle(squeeze(freqresp(L_svd(i_in_out, i_in_out), freqs, 'Hz'))));
|
|
end
|
|
set(gca,'ColorOrderIndex',2)
|
|
for i_in_out = 1:3
|
|
set(gca,'ColorOrderIndex',2)
|
|
plot(freqs, 180/pi*angle(squeeze(freqresp(L_cen(i_in_out, i_in_out), freqs, 'Hz'))));
|
|
end
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'lin');
|
|
ylabel('Phase [deg]'); xlabel('Frequency [Hz]');
|
|
ylim([-180, 180]);
|
|
yticks([-180:90:360]);
|
|
|
|
linkaxes([ax1,ax2],'x');
|
|
|
|
% Closed-Loop system Performances
|
|
% <<sec:gravimeter_closed_loop_results>>
|
|
|
|
% Let's first verify the stability of the closed-loop systems:
|
|
|
|
isstable(G_cen)
|
|
|
|
|
|
|
|
% #+RESULTS:
|
|
% : ans =
|
|
% : logical
|
|
% : 1
|
|
|
|
|
|
isstable(G_svd)
|
|
|
|
|
|
|
|
% #+RESULTS:
|
|
% : ans =
|
|
% : logical
|
|
% : 1
|
|
|
|
% The obtained transmissibility in Open-loop, for the centralized control as well as for the SVD control are shown in Figure [[fig:gravimeter_platform_simscape_cl_transmissibility]].
|
|
|
|
|
|
freqs = logspace(-2, 2, 1000);
|
|
|
|
figure;
|
|
tiledlayout(1, 3, 'TileSpacing', 'None', 'Padding', 'None');
|
|
|
|
ax1 = nexttile;
|
|
hold on;
|
|
plot(freqs, abs(squeeze(freqresp(G( 1,1)/s^2, freqs, 'Hz'))), 'DisplayName', 'Open-Loop');
|
|
plot(freqs, abs(squeeze(freqresp(G_cen(1,1)/s^2, freqs, 'Hz'))), 'DisplayName', 'Centralized');
|
|
plot(freqs, abs(squeeze(freqresp(G_svd(1,1)/s^2, freqs, 'Hz'))), '--', 'DisplayName', 'SVD');
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
ylabel('Transmissibility'); xlabel('Frequency [Hz]');
|
|
title('$D_x/D_{w,x}$');
|
|
legend('location', 'southwest');
|
|
|
|
ax2 = nexttile;
|
|
hold on;
|
|
plot(freqs, abs(squeeze(freqresp(G( 2,2)/s^2, freqs, 'Hz'))));
|
|
plot(freqs, abs(squeeze(freqresp(G_cen(2,2)/s^2, freqs, 'Hz'))));
|
|
plot(freqs, abs(squeeze(freqresp(G_svd(2,2)/s^2, freqs, 'Hz'))), '--');
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
set(gca, 'YTickLabel',[]); xlabel('Frequency [Hz]');
|
|
title('$D_y/D_{w,y}$');
|
|
|
|
ax3 = nexttile;
|
|
hold on;
|
|
plot(freqs, abs(squeeze(freqresp(G( 3,3)/s^2, freqs, 'Hz'))));
|
|
plot(freqs, abs(squeeze(freqresp(G_cen(3,3)/s^2, freqs, 'Hz'))));
|
|
plot(freqs, abs(squeeze(freqresp(G_svd(3,3)/s^2, freqs, 'Hz'))), '--');
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
set(gca, 'YTickLabel',[]); xlabel('Frequency [Hz]');
|
|
title('$R_z/R_{w,z}$');
|
|
|
|
linkaxes([ax1,ax2,ax3],'xy');
|
|
xlim([freqs(1), freqs(end)]);
|
|
xlim([1e-2, 5e1]); ylim([1e-7, 1e-2]);
|
|
|
|
|
|
|
|
% #+name: fig:gravimeter_platform_simscape_cl_transmissibility
|
|
% #+caption: Obtained Transmissibility
|
|
% #+RESULTS:
|
|
% [[file:figs/gravimeter_platform_simscape_cl_transmissibility.png]]
|
|
|
|
|
|
freqs = logspace(-2, 2, 1000);
|
|
|
|
figure;
|
|
hold on;
|
|
for out_i = 1:3
|
|
for in_i = out_i+1:3
|
|
set(gca,'ColorOrderIndex',1)
|
|
plot(freqs, abs(squeeze(freqresp(G( out_i,in_i), freqs, 'Hz'))));
|
|
set(gca,'ColorOrderIndex',2)
|
|
plot(freqs, abs(squeeze(freqresp(G_cen(out_i,in_i), freqs, 'Hz'))));
|
|
set(gca,'ColorOrderIndex',3)
|
|
plot(freqs, abs(squeeze(freqresp(G_svd(out_i,in_i), freqs, 'Hz'))), '--');
|
|
end
|
|
end
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
ylabel('Transmissibility'); xlabel('Frequency [Hz]');
|
|
|
|
% Robustness to a change of actuator position
|
|
|
|
% Let say we change the position of the actuators:
|
|
|
|
la = l/2*0.7; % Position of Act. [m]
|
|
ha = h/2*0.7; % Position of Act. [m]
|
|
|
|
%% Name of the Simulink File
|
|
mdl = 'gravimeter';
|
|
|
|
%% Input/Output definition
|
|
clear io; io_i = 1;
|
|
io(io_i) = linio([mdl, '/F1'], 1, 'openinput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/F2'], 1, 'openinput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/F3'], 1, 'openinput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_side'], 1, 'openoutput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_side'], 2, 'openoutput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_top'], 1, 'openoutput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_top'], 2, 'openoutput'); io_i = io_i + 1;
|
|
|
|
G = linearize(mdl, io);
|
|
G.InputName = {'F1', 'F2', 'F3'};
|
|
G.OutputName = {'Ax1', 'Ay1', 'Ax2', 'Ay2'};
|
|
|
|
G_cen_b = feedback(G, pinv(Jt')*K_cen*pinv(Ja));
|
|
G_svd_b = feedback(G, inv(V')*K_svd*U_inv(1:3, :));
|
|
|
|
|
|
|
|
% The new plant is computed, and the centralized and SVD control architectures are applied using the previsouly computed Jacobian matrices and $U$ and $V$ matrices.
|
|
|
|
% The closed-loop system are still stable, and their
|
|
|
|
|
|
freqs = logspace(-2, 2, 1000);
|
|
|
|
figure;
|
|
tiledlayout(1, 3, 'TileSpacing', 'None', 'Padding', 'None');
|
|
|
|
ax1 = nexttile;
|
|
hold on;
|
|
plot(freqs, abs(squeeze(freqresp(G_cen(1,1)/s^2, freqs, 'Hz'))), 'DisplayName', 'Initial');
|
|
plot(freqs, abs(squeeze(freqresp(G_cen_b(1,1)/s^2, freqs, 'Hz'))), 'DisplayName', 'Jacobian');
|
|
plot(freqs, abs(squeeze(freqresp(G_svd_b(1,1)/s^2, freqs, 'Hz'))), '--', 'DisplayName', 'SVD');
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
ylabel('Transmissibility'); xlabel('Frequency [Hz]');
|
|
title('$D_x/D_{w,x}$');
|
|
legend('location', 'southwest');
|
|
|
|
ax2 = nexttile;
|
|
hold on;
|
|
plot(freqs, abs(squeeze(freqresp(G_cen(2,2)/s^2, freqs, 'Hz'))));
|
|
plot(freqs, abs(squeeze(freqresp(G_cen_b(2,2)/s^2, freqs, 'Hz'))));
|
|
plot(freqs, abs(squeeze(freqresp(G_svd_b(2,2)/s^2, freqs, 'Hz'))), '--');
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
set(gca, 'YTickLabel',[]); xlabel('Frequency [Hz]');
|
|
title('$D_y/D_{w,y}$');
|
|
|
|
ax3 = nexttile;
|
|
hold on;
|
|
plot(freqs, abs(squeeze(freqresp(G_cen(3,3)/s^2, freqs, 'Hz'))));
|
|
plot(freqs, abs(squeeze(freqresp(G_cen_b(3,3)/s^2, freqs, 'Hz'))));
|
|
plot(freqs, abs(squeeze(freqresp(G_svd_b(3,3)/s^2, freqs, 'Hz'))), '--');
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
set(gca, 'YTickLabel',[]); xlabel('Frequency [Hz]');
|
|
title('$R_z/R_{w,z}$');
|
|
|
|
linkaxes([ax1,ax2,ax3],'xy');
|
|
xlim([freqs(1), freqs(end)]);
|
|
xlim([1e-2, 5e1]); ylim([1e-7, 3e-4]);
|
|
|
|
% Decoupling of the mass matrix
|
|
|
|
% #+name: fig:gravimeter_model_M
|
|
% #+caption: Choice of {O} such that the Mass Matrix is Diagonal
|
|
% [[file:figs/gravimeter_model_M.png]]
|
|
|
|
|
|
la = l/2; % Position of Act. [m]
|
|
ha = h/2; % Position of Act. [m]
|
|
|
|
%% Name of the Simulink File
|
|
mdl = 'gravimeter';
|
|
|
|
%% Input/Output definition
|
|
clear io; io_i = 1;
|
|
io(io_i) = linio([mdl, '/F1'], 1, 'openinput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/F2'], 1, 'openinput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/F3'], 1, 'openinput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_side'], 1, 'openoutput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_side'], 2, 'openoutput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_top'], 1, 'openoutput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_top'], 2, 'openoutput'); io_i = io_i + 1;
|
|
|
|
G = linearize(mdl, io);
|
|
G.InputName = {'F1', 'F2', 'F3'};
|
|
G.OutputName = {'Ax1', 'Ay1', 'Ax2', 'Ay2'};
|
|
|
|
|
|
|
|
% Decoupling at the CoM (Mass decoupled)
|
|
|
|
JMa = [1 0 -h/2
|
|
0 1 l/2
|
|
1 0 h/2
|
|
0 1 0];
|
|
|
|
JMt = [1 0 -ha
|
|
0 1 la
|
|
0 1 -la];
|
|
|
|
GM = pinv(JMa)*G*pinv(JMt');
|
|
GM.InputName = {'Fx', 'Fy', 'Mz'};
|
|
GM.OutputName = {'Dx', 'Dy', 'Rz'};
|
|
|
|
figure;
|
|
|
|
% Magnitude
|
|
hold on;
|
|
for i_in = 1:3
|
|
for i_out = [1:i_in-1, i_in+1:3]
|
|
plot(freqs, abs(squeeze(freqresp(GM(i_out, i_in), freqs, 'Hz'))), 'color', [0,0,0,0.2], ...
|
|
'HandleVisibility', 'off');
|
|
end
|
|
end
|
|
plot(freqs, abs(squeeze(freqresp(GM(i_out, i_in), freqs, 'Hz'))), 'color', [0,0,0,0.2], ...
|
|
'DisplayName', '$G_x(i,j)\ i \neq j$');
|
|
set(gca,'ColorOrderIndex',1)
|
|
for i_in_out = 1:3
|
|
plot(freqs, abs(squeeze(freqresp(GM(i_in_out, i_in_out), freqs, 'Hz'))), 'DisplayName', sprintf('$G_x(%d,%d)$', i_in_out, i_in_out));
|
|
end
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
xlabel('Frequency [Hz]'); ylabel('Magnitude');
|
|
legend('location', 'southeast');
|
|
ylim([1e-8, 1e0]);
|
|
|
|
% Decoupling of the stiffness matrix
|
|
|
|
% #+name: fig:gravimeter_model_K
|
|
% #+caption: Choice of {O} such that the Stiffness Matrix is Diagonal
|
|
% [[file:figs/gravimeter_model_K.png]]
|
|
|
|
% Decoupling at the point where K is diagonal (x = 0, y = -h/2 from the schematic {O} frame):
|
|
|
|
JKa = [1 0 0
|
|
0 1 -l/2
|
|
1 0 -h
|
|
0 1 0];
|
|
|
|
JKt = [1 0 0
|
|
0 1 -la
|
|
0 1 la];
|
|
|
|
|
|
|
|
% And the plant $\bm{G}_x$ is computed:
|
|
|
|
GK = pinv(JKa)*G*pinv(JKt');
|
|
GK.InputName = {'Fx', 'Fy', 'Mz'};
|
|
GK.OutputName = {'Dx', 'Dy', 'Rz'};
|
|
|
|
figure;
|
|
|
|
% Magnitude
|
|
hold on;
|
|
for i_in = 1:3
|
|
for i_out = [1:i_in-1, i_in+1:3]
|
|
plot(freqs, abs(squeeze(freqresp(GK(i_out, i_in), freqs, 'Hz'))), 'color', [0,0,0,0.2], ...
|
|
'HandleVisibility', 'off');
|
|
end
|
|
end
|
|
plot(freqs, abs(squeeze(freqresp(GK(i_out, i_in), freqs, 'Hz'))), 'color', [0,0,0,0.2], ...
|
|
'DisplayName', '$G_x(i,j)\ i \neq j$');
|
|
set(gca,'ColorOrderIndex',1)
|
|
for i_in_out = 1:3
|
|
plot(freqs, abs(squeeze(freqresp(GK(i_in_out, i_in_out), freqs, 'Hz'))), 'DisplayName', sprintf('$G_x(%d,%d)$', i_in_out, i_in_out));
|
|
end
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
xlabel('Frequency [Hz]'); ylabel('Magnitude');
|
|
legend('location', 'southeast');
|
|
ylim([1e-8, 1e0]);
|
|
|
|
% Combined decoupling of the mass and stiffness matrices
|
|
|
|
% #+name: fig:gravimeter_model_KM
|
|
% #+caption: Ideal location of the actuators such that both the mass and stiffness matrices are diagonal
|
|
% [[file:figs/gravimeter_model_KM.png]]
|
|
|
|
% To do so, the actuator position should be modified
|
|
|
|
|
|
la = l/2; % Position of Act. [m]
|
|
ha = 0; % Position of Act. [m]
|
|
|
|
%% Name of the Simulink File
|
|
mdl = 'gravimeter';
|
|
|
|
%% Input/Output definition
|
|
clear io; io_i = 1;
|
|
io(io_i) = linio([mdl, '/F1'], 1, 'openinput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/F2'], 1, 'openinput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/F3'], 1, 'openinput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_side'], 1, 'openoutput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_side'], 2, 'openoutput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_top'], 1, 'openoutput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_top'], 2, 'openoutput'); io_i = io_i + 1;
|
|
|
|
G = linearize(mdl, io);
|
|
G.InputName = {'F1', 'F2', 'F3'};
|
|
G.OutputName = {'Ax1', 'Ay1', 'Ax2', 'Ay2'};
|
|
|
|
JMa = [1 0 -h/2
|
|
0 1 l/2
|
|
1 0 h/2
|
|
0 1 0];
|
|
|
|
JMt = [1 0 -ha
|
|
0 1 la
|
|
0 1 -la];
|
|
|
|
GKM = pinv(JMa)*G*pinv(JMt');
|
|
GKM.InputName = {'Fx', 'Fy', 'Mz'};
|
|
GKM.OutputName = {'Dx', 'Dy', 'Rz'};
|
|
|
|
figure;
|
|
|
|
% Magnitude
|
|
hold on;
|
|
for i_in = 1:3
|
|
for i_out = [1:i_in-1, i_in+1:3]
|
|
plot(freqs, abs(squeeze(freqresp(GKM(i_out, i_in), freqs, 'Hz'))), 'color', [0,0,0,0.2], ...
|
|
'HandleVisibility', 'off');
|
|
end
|
|
end
|
|
plot(freqs, abs(squeeze(freqresp(GKM(i_out, i_in), freqs, 'Hz'))), 'color', [0,0,0,0.2], ...
|
|
'DisplayName', '$G_x(i,j)\ i \neq j$');
|
|
set(gca,'ColorOrderIndex',1)
|
|
for i_in_out = 1:3
|
|
plot(freqs, abs(squeeze(freqresp(GKM(i_in_out, i_in_out), freqs, 'Hz'))), 'DisplayName', sprintf('$G_x(%d,%d)$', i_in_out, i_in_out));
|
|
end
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
xlabel('Frequency [Hz]'); ylabel('Magnitude');
|
|
legend('location', 'southeast');
|
|
ylim([1e-8, 1e0]);
|
|
|
|
% SVD decoupling performances :noexport:
|
|
|
|
|
|
la = l/2; % Position of Act. [m]
|
|
ha = 0; % Position of Act. [m]
|
|
|
|
c = 2e1; % Actuator Damping [N/(m/s)]
|
|
|
|
%% Name of the Simulink File
|
|
mdl = 'gravimeter';
|
|
|
|
%% Input/Output definition
|
|
clear io; io_i = 1;
|
|
io(io_i) = linio([mdl, '/F1'], 1, 'openinput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/F2'], 1, 'openinput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/F3'], 1, 'openinput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_side'], 1, 'openoutput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_side'], 2, 'openoutput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_top'], 1, 'openoutput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_top'], 2, 'openoutput'); io_i = io_i + 1;
|
|
|
|
G = linearize(mdl, io);
|
|
G.InputName = {'F1', 'F2', 'F3'};
|
|
G.OutputName = {'Ax1', 'Ay1', 'Ax2', 'Ay2'};
|
|
|
|
wc = 2*pi*10; % Decoupling frequency [rad/s]
|
|
H1 = evalfr(G, j*wc);
|
|
D = pinv(real(H1'*H1));
|
|
H1 = pinv(D*real(H1'*diag(exp(j*angle(diag(H1*D*H1.'))/2))));
|
|
[U,S,V] = svd(H1);
|
|
Gsvd = inv(U)*G*inv(V');
|
|
|
|
c = 5e2; % Actuator Damping [N/(m/s)]
|
|
|
|
%% Name of the Simulink File
|
|
mdl = 'gravimeter';
|
|
|
|
%% Input/Output definition
|
|
clear io; io_i = 1;
|
|
io(io_i) = linio([mdl, '/F1'], 1, 'openinput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/F2'], 1, 'openinput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/F3'], 1, 'openinput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_side'], 1, 'openoutput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_side'], 2, 'openoutput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_top'], 1, 'openoutput'); io_i = io_i + 1;
|
|
io(io_i) = linio([mdl, '/Acc_top'], 2, 'openoutput'); io_i = io_i + 1;
|
|
|
|
G = linearize(mdl, io);
|
|
G.InputName = {'F1', 'F2', 'F3'};
|
|
G.OutputName = {'Ax1', 'Ay1', 'Ax2', 'Ay2'};
|
|
|
|
wc = 2*pi*10; % Decoupling frequency [rad/s]
|
|
H1 = evalfr(G, j*wc);
|
|
D = pinv(real(H1'*H1));
|
|
H1 = pinv(D*real(H1'*diag(exp(j*angle(diag(H1*D*H1.'))/2))));
|
|
[U,S,V] = svd(H1);
|
|
Gsvdd = inv(U)*G*inv(V');
|
|
|
|
JMa = [1 0 -h/2
|
|
0 1 l/2
|
|
1 0 h/2
|
|
0 1 0];
|
|
|
|
JMt = [1 0 -ha
|
|
0 1 la
|
|
0 1 -la];
|
|
|
|
GM = pinv(JMa)*G*pinv(JMt');
|
|
GM.InputName = {'Fx', 'Fy', 'Mz'};
|
|
GM.OutputName = {'Dx', 'Dy', 'Rz'};
|
|
|
|
figure;
|
|
|
|
% Magnitude
|
|
hold on;
|
|
for i_in = 1:3
|
|
for i_out = [1:i_in-1, i_in+1:3]
|
|
plot(freqs, abs(squeeze(freqresp(GM(i_out, i_in), freqs, 'Hz'))), 'color', [0,0,0,0.2], ...
|
|
'HandleVisibility', 'off');
|
|
end
|
|
end
|
|
plot(freqs, abs(squeeze(freqresp(GM(i_out, i_in), freqs, 'Hz'))), 'color', [0,0,0,0.2], ...
|
|
'DisplayName', '$G_x(i,j)\ i \neq j$');
|
|
set(gca,'ColorOrderIndex',1)
|
|
for i_in_out = 1:3
|
|
plot(freqs, abs(squeeze(freqresp(GM(i_in_out, i_in_out), freqs, 'Hz'))), 'DisplayName', sprintf('$G_x(%d,%d)$', i_in_out, i_in_out));
|
|
end
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
xlabel('Frequency [Hz]'); ylabel('Magnitude');
|
|
legend('location', 'southeast');
|
|
ylim([1e-8, 1e0]);
|
|
|
|
figure;
|
|
|
|
% Magnitude
|
|
hold on;
|
|
for i_in = 1:3
|
|
for i_out = [1:i_in-1, i_in+1:3]
|
|
plot(freqs, abs(squeeze(freqresp(Gsvd(i_out, i_in), freqs, 'Hz'))), 'color', [0,0,0,0.2], ...
|
|
'HandleVisibility', 'off');
|
|
end
|
|
end
|
|
plot(freqs, abs(squeeze(freqresp(Gsvd(i_out, i_in), freqs, 'Hz'))), 'color', [0,0,0,0.2], ...
|
|
'DisplayName', '$G_x(i,j)\ i \neq j$');
|
|
set(gca,'ColorOrderIndex',1)
|
|
for i_in_out = 1:3
|
|
plot(freqs, abs(squeeze(freqresp(Gsvd(i_in_out, i_in_out), freqs, 'Hz'))), 'DisplayName', sprintf('$G_x(%d,%d)$', i_in_out, i_in_out));
|
|
end
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
xlabel('Frequency [Hz]'); ylabel('Magnitude');
|
|
legend('location', 'southeast');
|
|
ylim([1e-8, 1e0]);
|
|
|
|
figure;
|
|
|
|
% Magnitude
|
|
hold on;
|
|
for i_in = 1:3
|
|
for i_out = [1:i_in-1, i_in+1:3]
|
|
plot(freqs, abs(squeeze(freqresp(Gsvdd(i_out, i_in), freqs, 'Hz'))), 'color', [0,0,0,0.2], ...
|
|
'HandleVisibility', 'off');
|
|
end
|
|
end
|
|
plot(freqs, abs(squeeze(freqresp(Gsvdd(i_out, i_in), freqs, 'Hz'))), 'color', [0,0,0,0.2], ...
|
|
'DisplayName', '$G_x(i,j)\ i \neq j$');
|
|
set(gca,'ColorOrderIndex',1)
|
|
for i_in_out = 1:3
|
|
plot(freqs, abs(squeeze(freqresp(Gsvdd(i_in_out, i_in_out), freqs, 'Hz'))), 'DisplayName', sprintf('$G_x(%d,%d)$', i_in_out, i_in_out));
|
|
end
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
xlabel('Frequency [Hz]'); ylabel('Magnitude');
|
|
legend('location', 'southeast');
|
|
ylim([1e-8, 1e0]);
|