Moved all the simulink files in each folders

uniaxial/index.org

@@ -643,7 +643,7 @@ Let's start by study the undamped system.
 #+end_src
 
 #+begin_src matlab
-  open 'simscape/sim_nano_station_uniaxial.slx'
+  open('uniaxial/matlab/sim_nano_station_uniaxial.slx')
 #+end_src
 
 ** Init
@@ -1075,7 +1075,7 @@ It corresponds to the plant to control.
 #+end_src
 
 #+begin_src matlab
-  open 'simscape/sim_nano_station_uniaxial.slx'
+  open('uniaxial/matlab/sim_nano_station_uniaxial.slx')
 #+end_src
 
 ** Control Design
@@ -1501,7 +1501,7 @@ In the Relative Motion Control (RMC), a derivative feedback is applied between t
 #+end_src
 
 #+begin_src matlab
-  open 'simscape/sim_nano_station_uniaxial.slx'
+  open('uniaxial/matlab/sim_nano_station_uniaxial.slx')
 #+end_src
 
 ** Control Design
@@ -1936,7 +1936,7 @@ In the Relative Motion Control (RMC), a feedback is applied between the measured
 #+end_src
 
 #+begin_src matlab
-  open 'simscape/sim_nano_station_uniaxial.slx'
+  open('uniaxial/matlab/sim_nano_station_uniaxial.slx')
 #+end_src
 
 ** Control Design
@@ -2236,7 +2236,7 @@ The model used for the Cedrat actuator is shown in figure [[fig:cedrat_schematic
 #+end_src
 
 #+begin_src matlab
-  open 'simscape/sim_nano_station_uniaxial_cedrat.slx'
+  open('uniaxial/matlab/sim_nano_station_uniaxial_cedrat.slx')
 #+end_src
 
 ** Identification
@@ -2573,7 +2573,7 @@ All the controllers are set to 0.
 #+end_src
 
 #+begin_src matlab
-  open 'simscape/sim_nano_station_uniaxial.slx'
+  open('uniaxial/matlab/sim_nano_station_uniaxial.slx')
 #+end_src
 
 ** Load the plants
@@ -2831,7 +2831,7 @@ It is important to note that the effect of direct forces applied to the sample a
 #+end_src
 
 #+begin_src matlab
-  open 'simscape/sim_nano_station_uniaxial.slx'
+  open('uniaxial/matlab/sim_nano_station_uniaxial.slx')
 #+end_src
 
 ** Init