153 lines
4.3 KiB
Matlab
153 lines
4.3 KiB
Matlab
%% Clear Workspace and Close figures
|
|
clear; close all; clc;
|
|
|
|
%% Intialize Laplace variable
|
|
s = zpk('s');
|
|
|
|
% Load data
|
|
|
|
data = load('mat/data_028.mat', 'data'); data = data.data;
|
|
|
|
% Time domain plots
|
|
|
|
figure;
|
|
hold on;
|
|
plot(data(:, 3), data(:, 1));
|
|
hold off;
|
|
xlabel('Time [s]'); ylabel('Voltage [V]');
|
|
xlim([0, 100]);
|
|
|
|
% Computation of the ASD of the measured voltage
|
|
|
|
dt = data(2, 3) - data(1, 3);
|
|
|
|
Fs = 1/dt;
|
|
win = hanning(ceil(10*Fs));
|
|
|
|
[px_dc, f] = pwelch(data(:, 1), win, [], [], Fs);
|
|
|
|
figure;
|
|
hold on;
|
|
plot(f, sqrt(px_dc));
|
|
hold off;
|
|
set(gca, 'xscale', 'log');
|
|
set(gca, 'yscale', 'log');
|
|
xlabel('Frequency [Hz]'); ylabel('Amplitude Spectral Density $\left[\frac{V}{\sqrt{Hz}}\right]$')
|
|
xlim([0.1, 500]);
|
|
|
|
% Scaling to take into account the sensibility of the geophone and the voltage amplifier
|
|
% The Geophone used are L22. Their sensibility is shown on figure [[fig:geophone_sensibility]].
|
|
|
|
|
|
S0 = 88; % Sensitivity [V/(m/s)]
|
|
f0 = 2; % Cut-off frequency [Hz]
|
|
|
|
S = S0*(s/2/pi/f0)/(1+s/2/pi/f0);
|
|
|
|
figure;
|
|
bodeFig({S}, logspace(-1, 2, 1000));
|
|
ylabel('Amplitude $\left[\frac{V}{m/s}\right]$')
|
|
|
|
|
|
|
|
% #+NAME: fig:geophone_sensibility
|
|
% #+CAPTION: Sensibility of the Geophone
|
|
% #+RESULTS: fig:geophone_sensibility
|
|
% [[file:figs/geophone_sensibility.png]]
|
|
|
|
% We also take into account the gain of the electronics which is here set to be $60dB$.
|
|
|
|
|
|
G0_db = 60; % [dB]
|
|
|
|
G0 = 10^(G0_db/20); % [abs]
|
|
|
|
|
|
|
|
% We divide the ASD measured (in $\text{V}/\sqrt{\text{Hz}}$) by the gain of the voltage amplifier to obtain the ASD of the voltage across the geophone.
|
|
% We further divide the result by the sensibility of the Geophone to obtain the ASD of the velocity in $m/s/\sqrt{Hz}$.
|
|
|
|
|
|
scaling = 1./squeeze(abs(freqresp(G0*S, f, 'Hz')));
|
|
|
|
% Computation of the ASD of the velocity
|
|
% The ASD of the measured velocity is shown on figure [[fig:ground_motion_id31_asd_velocity]].
|
|
|
|
|
|
figure;
|
|
hold on;
|
|
plot(f, sqrt(px_dc).*scaling);
|
|
hold off;
|
|
set(gca, 'xscale', 'log');
|
|
set(gca, 'yscale', 'log');
|
|
xlabel('Frequency [Hz]'); ylabel('ASD of the measured Velocity $\left[\frac{m/s}{\sqrt{Hz}}\right]$')
|
|
xlim([0.1, 500]);
|
|
|
|
|
|
|
|
% #+NAME: fig:ground_motion_id31_asd_velocity
|
|
% #+CAPTION: Amplitude Spectral Density of the Velocity
|
|
% #+RESULTS: fig:ground_motion_id31_asd_velocity
|
|
% [[file:figs/ground_motion_id31_asd_velocity.png]]
|
|
|
|
% We also plot the ASD in displacement (figure [[fig:ground_motion_id31_asd_displacement]]);
|
|
|
|
|
|
figure;
|
|
hold on;
|
|
plot(f, (sqrt(px_dc).*scaling)./(2*pi*f));
|
|
hold off;
|
|
set(gca, 'xscale', 'log'); set(gca, 'yscale', 'log');
|
|
xlabel('Frequency [Hz]'); ylabel('ASD of the displacement $\left[\frac{m}{\sqrt{Hz}}\right]$')
|
|
xlim([0.1, 500]);
|
|
|
|
|
|
|
|
% #+NAME: fig:ground_motion_id31_asd_displacement
|
|
% #+CAPTION: Amplitude Spectral Density of the Displacement
|
|
% #+RESULTS: fig:ground_motion_id31_asd_displacement
|
|
% [[file:figs/ground_motion_id31_asd_displacement.png]]
|
|
% And also in $\frac{{\mu u}^2}{Hz}$ (figure [[fig:ground_motion_id31_psd_displacement]]).
|
|
|
|
figure;
|
|
hold on;
|
|
plot(f, ((sqrt(px_dc).*scaling)./(2*pi*f).*1e6).^2);
|
|
hold off;
|
|
set(gca, 'xscale', 'log');
|
|
set(gca, 'yscale', 'log');
|
|
xlabel('Frequency [Hz]'); ylabel('PSD of the measured displacement $\left[\frac{{ \mu m }^2}{Hz}\right]$')
|
|
xlim([0.1, 500]);
|
|
|
|
% Load the measurement data
|
|
% First we load the measurement data.
|
|
% Here we have one measurement of the floor motion made at the ESRF in 2018, and one measurement made at CERN.
|
|
|
|
id09 = load('./mat/id09_floor_september2018.mat');
|
|
cern = load('./mat/ground_motion_dist.mat');
|
|
|
|
% Compute PSD of the measurements
|
|
% We compute the Power Spectral Densities of the measurements.
|
|
|
|
Fs_id09 = 1/(id09.time3(2)-id09.time3(1));
|
|
win_id09 = hanning(ceil(10*Fs_id09));
|
|
[id09_pxx, id09_f] = pwelch(1e-6*id09.x_y_z(:, 3), win_id09, [], [], Fs_id09);
|
|
|
|
Fs_cern = 1/(cern.gm.time(2)-cern.gm.time(1));
|
|
win_cern = hanning(ceil(10*Fs_cern));
|
|
[cern_pxx, cern_f] = pwelch(cern.gm.signal, win_cern, [], [], Fs_cern);
|
|
|
|
% Compare PSD of Cern, ID09 and ID31
|
|
% And we compare all the measurements (figure [[fig:ground_motion_compare]]).
|
|
|
|
|
|
figure;
|
|
hold on;
|
|
plot(id09_f, id09_pxx, 'DisplayName', 'ID09');
|
|
plot(cern_f, cern_pxx, 'DisplayName', 'CERN');
|
|
plot(f, ((sqrt(px_dc).*scaling)./(2*pi*f)).^2, 'k', 'DisplayName', 'ID31');
|
|
hold off;
|
|
set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
|
|
xlabel('Frequency [Hz]'); ylabel('PSD [$m^2/Hz$]');
|
|
legend('Location', 'northeast');
|
|
xlim([0.1, 500]);
|