Thomas Dehaeze
6e3677eb29
Folder name is changed, rework the html templates Change the organisation.
88 lines
2.5 KiB
Matlab
88 lines
2.5 KiB
Matlab
% Matlab Init :noexport:ignore:
|
|
|
|
current_dir='/home/thomas/MEGA/These/meas/slip-ring-test/';
|
|
%% Clear Workspace and Close figures
|
|
clear; close all; clc;
|
|
|
|
%% Intialize Laplace variable
|
|
s = zpk('s');
|
|
|
|
% Load data
|
|
% We load the data of the z axis of two geophones.
|
|
|
|
sr_off = load('mat/data_008.mat', 'data'); sr_off = sr_off.data;
|
|
sr_on = load('mat/data_009.mat', 'data'); sr_on = sr_on.data;
|
|
sr_6r = load('mat/data_010.mat', 'data'); sr_6r = sr_6r.data;
|
|
sr_60r = load('mat/data_011.mat', 'data'); sr_60r = sr_60r.data;
|
|
|
|
% Time Domain
|
|
% We plot the time domain data for the direct measurement (figure [[fig:sr_direct_time]]) and for the signal going through the slip-ring (figure [[fig:sr_slipring_time]]);
|
|
|
|
|
|
figure;
|
|
hold on;
|
|
plot(sr_60r(:, 3), sr_60r(:, 1), 'DisplayName', '60rpm');
|
|
plot(sr_6r(:, 3), sr_6r(:, 1), 'DisplayName', '6rpm');
|
|
plot(sr_on(:, 3), sr_on(:, 1), 'DisplayName', 'ON');
|
|
plot(sr_off(:, 3), sr_off(:, 1), 'DisplayName', 'OFF');
|
|
hold off;
|
|
xlabel('Time [s]'); ylabel('Voltage [V]');
|
|
legend('Location', 'northeast');
|
|
|
|
|
|
|
|
% #+NAME: fig:sr_direct_time
|
|
% #+CAPTION: Direct measurement
|
|
% #+RESULTS: fig:sr_direct_time
|
|
% [[file:figs/sr_direct_time.png]]
|
|
|
|
|
|
|
|
figure;
|
|
hold on;
|
|
plot(sr_60r(:, 3), sr_60r(:, 2), 'DisplayName', '60rpm');
|
|
plot(sr_6r(:, 3), sr_6r(:, 2), 'DisplayName', '6rpm');
|
|
plot(sr_on(:, 3), sr_on(:, 2), 'DisplayName', 'ON');
|
|
plot(sr_off(:, 3), sr_off(:, 2), 'DisplayName', 'OFF');
|
|
hold off;
|
|
xlabel('Time [s]'); ylabel('Voltage [V]');
|
|
legend('Location', 'northeast');
|
|
|
|
% Frequency Domain
|
|
% We first compute some parameters that will be used for the PSD computation.
|
|
|
|
dt = sr_off(2, 3)-sr_off(1, 3);
|
|
|
|
Fs = 1/dt; % [Hz]
|
|
|
|
win = hanning(ceil(10*Fs));
|
|
|
|
|
|
|
|
% Then we compute the Power Spectral Density using =pwelch= function.
|
|
|
|
[pxdir, f] = pwelch(sr_off(:, 1), win, [], [], Fs);
|
|
[pxoff, ~] = pwelch(sr_off(:, 2), win, [], [], Fs);
|
|
[pxon, ~] = pwelch(sr_on(:, 2), win, [], [], Fs);
|
|
[px6r, ~] = pwelch(sr_6r(:, 2), win, [], [], Fs);
|
|
[px60r, ~] = pwelch(sr_60r(:, 2), win, [], [], Fs);
|
|
|
|
|
|
|
|
% And we plot the ASD of the measured signals (figure [[fig:sr_psd_compare]]);
|
|
|
|
|
|
figure;
|
|
hold on;
|
|
plot(f, sqrt(pxoff), 'DisplayName', 'OFF');
|
|
plot(f, sqrt(pxon), 'DisplayName', 'ON');
|
|
plot(f, sqrt(px6r), 'DisplayName', '6rpm');
|
|
plot(f, sqrt(px60r), 'DisplayName', '60rpm');
|
|
plot(f, sqrt(pxdir), 'k-', 'DisplayName', 'Direct');
|
|
hold off;
|
|
set(gca, 'xscale', 'log');
|
|
set(gca, 'yscale', 'log');
|
|
xlabel('Frequency [Hz]'); ylabel('ASD of the measured Voltage $\left[\frac{V}{\sqrt{Hz}}\right]$')
|
|
legend('Location', 'northeast');
|
|
xlim([0.1, 500]);
|