Modal Analysis of the ID31 Micro-Station
The goal is to experimentally extract a Spatial Model (mass, damping, stiffness) of the structure (shown on figure 1) in order to tune the Multi-Body model.
Figure 1: Picture of the ID31 Micro-Station. (1) Granite (2) Translation Stage (3) Tilt Stage (4) Hexapod (5) Dummy Mass
The procedure is represented on figure 2 where we go from left to right.
Figure 2: Vibration Analysis Procedure
The steps are:
- we obtain a Response Model (Frequency Response Functions) from measurements (described here)
- the response model is further converted into a Modal Model (Natural Frequencies and Mode Shapes) (described here)
- this is converted into a Spatial Model with the Mass/Damping/Stiffness matrices (described here)
Theses matrices will be used to tune the Simscape (multi-body) model.
The modes we want to identify are those in the frequency range between 0Hz and 150Hz.
The modal analysis of the ID31 Micro-station thus consists of several parts: