4594 lines
193 KiB
TeX
4594 lines
193 KiB
TeX
%%
|
|
%% IEEEtran.cls 2002/11/18 version V1.6b
|
|
%%
|
|
%% NOTE: This text file uses MS Windows line feed conventions. When (human)
|
|
%% reading this file on other platforms, you may have to use a text
|
|
%% editor that can handle lines terminated by the MS Windows line feed
|
|
%% characters (0x0D 0x0A).
|
|
%%
|
|
%%
|
|
%% This is the official IEEE LaTeX class for authors of the Institute of
|
|
%% Electrical and Electronics Engineers (IEEE) Transactions journals and
|
|
%% conferences.
|
|
%%
|
|
%% The latest version and documentation of IEEEtran can be obtained at:
|
|
%% http://www.ieee.org
|
|
%% and/or
|
|
%% http://www.ctan.org/tex-archive/macros/latex/contrib/supported/IEEEtran/
|
|
%%
|
|
%% The CTAN page may have additional files related to obscure,
|
|
%% non-IEEE standard and/or platform dependent use of this tool.
|
|
%%
|
|
%% Based on the original 1993 IEEEtran.cls, but with many bug fixes
|
|
%% and enhancements (from both JVH and MDS) over the 1996/7 version.
|
|
%%
|
|
%%
|
|
%% Contributors:
|
|
%% Gerry Murray (1993), Silvano Balemi (1993),
|
|
%% Jon Dixon (1996), Peter N"uchter (1996),
|
|
%% Juergen von Hagen (2000), and Michael Shell (2001-2002)
|
|
%%
|
|
%%
|
|
%% Copyright (c) 1993-2002 by Gerry Murray, Silvano Balemi,
|
|
%% Jon Dixion, Peter N"uchter,
|
|
%% Juergen von Hagen and Michael Shell
|
|
%%
|
|
%% Current maintainer (V1.3 to V1.6): Michael Shell
|
|
%% mshell@ece.gatech.edu
|
|
%% See the CTAN website above
|
|
%% for current contact information.
|
|
%%
|
|
%% Special thanks to Peter Wilson (CUA) and Donald Arseneau
|
|
%% for allowing the inclusion of the \@ifmtarg command
|
|
%% from their ifmtarg LaTeX package.
|
|
%%
|
|
%%**********************************************************************
|
|
%% Legal Notice:
|
|
%% This code is offered as-is without any warranty either
|
|
%% expressed or implied; without even the implied warranty of
|
|
%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE!
|
|
%% User assumes all risk.
|
|
%% In no event shall IEEE or any contributor to this code
|
|
%% be liable for any damages or losses, including, but not limited to,
|
|
%% incidental, consequential, or any other damages, resulting from the
|
|
%% use or misuse of any information contained here.
|
|
%%
|
|
%% All comments are the opinions of their respective authors and are not
|
|
%% necessarily endorsed by the IEEE.
|
|
%%
|
|
%% This code is distributed under the Perl Artistic License
|
|
%% ( http://language.perl.com/misc/Artistic.html )
|
|
%% and may be freely used, distributed and modified.
|
|
%% Retain the contribution notices and credits.
|
|
%%
|
|
%% Major changes to the user interface should be indicated by an
|
|
%% increase in the version numbers. If a version is a beta, it will
|
|
%% be indicated with a BETA suffix, i.e., 1.4 BETA.
|
|
%% Small changes can be indicated by appending letters to the version
|
|
%% such as "IEEEtran_v14a.cls".
|
|
%% In all cases, \Providesclass, any \typeout messages to the user,
|
|
%% \IEEEtransversionmajor and \IEEEtransversionminor must reflect the
|
|
%% correct version information.
|
|
%% The changes should also be documented via source comments.
|
|
%%**********************************************************************
|
|
%%
|
|
%
|
|
% Available class options
|
|
% (e.g., \documentclass[10pt,conference]{ieeeconf}
|
|
%
|
|
% *** choose only one from each category ***
|
|
%
|
|
% 9pt, 10pt, 11pt, 12pt
|
|
% Sets normal font size. The default is 10pt.
|
|
%
|
|
% conference, journal, technote, peerreview, peerreviewca
|
|
% determines format mode - conference papers, journal papers,
|
|
% correspondence papers (technotes), or peer review papers. The user
|
|
% should also select 9pt when using technote. peerreview is like
|
|
% journal mode, but provides for a single-column "cover" title page for
|
|
% anonymous peer review. The paper title (without the author names) is
|
|
% repeated at the top of the page after the cover page. For peer review
|
|
% papers, the \IEEEpeerreviewmaketitle command must be executed (will
|
|
% automatically be ignored for non-peerreview modes) at the place the
|
|
% cover page is to end, usually just after the abstract (keywords are
|
|
% not normally used with peer review papers). peerreviewca is like
|
|
% peerreview, but allows the author names to be entered and formatted
|
|
% as with conference mode so that author affiliation and contact
|
|
% information can be easily seen on the cover page.
|
|
% The default is journal.
|
|
%
|
|
% draft, draftcls, draftclsnofoot, final
|
|
% determines if paper is formatted as a widely spaced draft (for
|
|
% handwritten editor comments) or as a properly typeset final version.
|
|
% draftcls restricts draft mode to the class file while all other LaTeX
|
|
% packages (i.e., \usepackage{graphicx}) will behave as final - allows
|
|
% for a draft paper with visible figures, etc. draftclsnofoot is like
|
|
% draftcls, but does not display the date and the word "DRAFT" at the foot
|
|
% of the pages. If using one of the draft modes, the user will probably
|
|
% also want to select onecolumn.
|
|
% The default is final.
|
|
%
|
|
% letterpaper, a4paper
|
|
% determines paper size: 8.5in X 11in or 210mm X 297mm. CHANGING THE PAPER
|
|
% SIZE WILL NOT ALTER THE TYPESETTING OF THE DOCUMENT - ONLY THE MARGINS
|
|
% WILL BE AFFECTED. In particular, documents using the a4paper option will
|
|
% have reduced side margins (A4 is narrower than US letter) and a longer
|
|
% bottom margin (A4 is longer than US letter). For both cases, the top
|
|
% margins will be the same and the text will be horizontally centered.
|
|
% For final submission to IEEE, authors should use US letter (8.5 X 11in)
|
|
% paper. Note that authors should ensure that all post-processing
|
|
% (ps, pdf, etc.) uses the same paper specificiation as the .tex document.
|
|
% Problems here are by far the number one reason for incorrect margins.
|
|
% IEEEtran will automatically set the default paper size under pdflatex
|
|
% (without requiring a change to pdftex.cfg), so this issue is more
|
|
% important to dvips users. Fix config.ps, config.pdf, or ~/.dvipsrc for
|
|
% dvips, or use the dvips -t papersize option instead as needed. See the
|
|
% testflow documentation
|
|
% http://www.ctan.org/tex-archive/macros/latex/contrib/supported/IEEEtran/testflow
|
|
% for more details on dvips paper size configuration.
|
|
% The default is letterpaper.
|
|
%
|
|
% oneside, twoside
|
|
% determines if layout follows single sided or two sided (duplex)
|
|
% printing. The only notable change is with the headings at the top of
|
|
% the pages.
|
|
% The default is oneside.
|
|
%
|
|
% onecolumn, twocolumn
|
|
% determines if text is organized into one or two columns per page. One
|
|
% column mode is usually used only with draft papers.
|
|
% The default is twocolumn.
|
|
%
|
|
% nofonttune
|
|
% turns off tuning of the font interword spacing. Maybe useful to those
|
|
% not using the standard Times fonts or for those who have already "tuned"
|
|
% their fonts.
|
|
% The default is to enable IEEEtran to tune font parameters.
|
|
%
|
|
%
|
|
%*******
|
|
% 11/2002 V1.6b (MDS) changes:
|
|
%
|
|
% 1) Fixed problem with figure captions when using hyperref. Thanks to
|
|
% Leandro Barajas and Michael Bassetti for reporting this bug.
|
|
%
|
|
% 2) Provide a fake nabib command \NAT@parse so that hyperref will not
|
|
% interfere with the operation of cite.sty. However, as a result citation
|
|
% numbers will not be hyperlinked. Also, natbib will not be able to work
|
|
% with IEEEtran. However, this is perhaps the best solution until cite.sty
|
|
% and hyperref.sty are able to co-exist with each other.
|
|
% It easy enough to override the fake command via:
|
|
% \makeatletter
|
|
% \let\NAT@parse\undefined
|
|
% \makeatother
|
|
%
|
|
% 3) Revised font selection method so as not to have problems when used
|
|
% with setspace.sty. Thanks to Zhang Yan for reporting this bug.
|
|
%
|
|
% 4) Added \special to feed papersize to dvips. Thanks to Moritz Borgmann
|
|
% for suggesting this feature.
|
|
%
|
|
% 5) In addition to the IEEE IED lists, the original IED style list
|
|
% environments (as is done in article.cls) are now provided as
|
|
% LaTeXitemize, LaTeXenumerate, and LaTeXdescription. Also, users can
|
|
% now redefine \makelabel within IEEE IED list controls. There may be
|
|
% some use for this in specialized applications. Thanks to Eli Barzilay
|
|
% for suggesting this feature.
|
|
%
|
|
% 6) \table* now defaults to \footnotesize text like \table.
|
|
%
|
|
% 7) The draft modes now no longer force a pagebreak after the title.
|
|
% Thanks to Christian Peel for suggesting this change.
|
|
%
|
|
% 8) New draftclsnofoot mode is like draftcls, but does not display the
|
|
% date and the word "DRAFT" at the foot of the page. Thanks to
|
|
% Christian Peel for suggesting this feature.
|
|
%
|
|
% 9) New peerreview and peerreviewca modes with \IEEEpeerreviewmaketitle
|
|
% command allows for a "cover" titlepage for anonymous peer review.
|
|
% Except for the cover titlepage, peerreview is much like journal mode.
|
|
% peerreviewca is like peerreview, but allows the author names to be
|
|
% entered and formatted as under conference mode so that author
|
|
% affiliations and contact information can be easily seen on the cover
|
|
% page. Thanks to Eric Benedict for suggesting this feature.
|
|
%
|
|
%
|
|
%*******
|
|
% 7/2002 V1.6 (MDS) changes:
|
|
%
|
|
% 1) Added conference mode via conference option. Defaults to the traditional
|
|
% journal mode. i.e., \documentclass[conference]{IEEEtran}
|
|
%
|
|
% 2) Added support for A4 paper via new a4paper option. Pdflatex's paper size
|
|
% lengths are now automatically set to the proper paper size being used.
|
|
%
|
|
% 3) Revised margins again. Page text is now horizontally centered.
|
|
% Conference mode increases the top and bottom margins with the bottom
|
|
% margin being slightly larger. For A4 paper, the top margin and text
|
|
% typesetting will not change from those of US letter paper, but the side
|
|
% margins will be smaller and the bottom margin will be larger than that of
|
|
% US letter. All per IEEE specs.
|
|
%
|
|
% 4) Fixed footnote line spacing anomaly in draft mode.
|
|
% Thanks to Alberto Rodriguez for reporting this bug.
|
|
%
|
|
% Also, slightly revised footnote and \thanks note spacing.
|
|
% Set \interfootnotelinepenalty=10000 to prevent LaTeX
|
|
% from breaking footnotes across multiple pages or columns.
|
|
%
|
|
% 5) Fixed bug that caused overwritten photo areas and sometimes anomalous
|
|
% spacing when a new paragraph was started within a biography. Also,
|
|
% the presence of \par's, new lines or spaces at the beginning of
|
|
% abstract, keywords, biography, or biographynophoto will no longer
|
|
% affect the first word spacing.
|
|
% Thanks to Eric Durant for reporting this bug.
|
|
%
|
|
% The biography environment now does a better job in preventing
|
|
% a biography photo area from being broken across pages or columns.
|
|
%
|
|
% 6) Fixed whitespace between \cite entries bug. i.e.,
|
|
% both \cite{einstein24, knuth84} and \cite{einstein24,knuth84}
|
|
% are now valid. \cite is now a robust command as it should be.
|
|
% IEEEtran now no longer defines the old non-standard \shortcite or
|
|
% \citename.
|
|
%
|
|
% The base IEEEtran.cls does not sort citation numbers or produce ranges
|
|
% for three or more consecutive numbers. However, V1.6 of IEEEtran.cls
|
|
% now pre-defines the following format control macros to facilitate easy
|
|
% use with Donald Arseneau's cite.sty package (tested with cite.sty V3.9):
|
|
%
|
|
% \def\citepunct{], [}
|
|
% \def\citedash{]--[}
|
|
%
|
|
% cite.sty is standard on most LaTeX sytems and can be obtained from
|
|
% www.ctan.org. Thanks to Donald Arseneau for creating cite.sty, providing
|
|
% the required format arguments to produce the IEEE style. and
|
|
% designing a cite interface capable of handling the IEEE citation
|
|
% style.
|
|
%
|
|
% Note: Historically, IEEE has wanted authors to "hardcode" symbolics.
|
|
% (i.e., replace all \cite{} with fixed [x]). However, it now seems that
|
|
% most electronic manuscript submissions to IEEE are in .pdf format, and
|
|
% as such, do not require the LaTeX document reference numbers to be hard
|
|
% coded. If an author is required to submit actual LaTeX files, I do
|
|
% recommend that the bibliography file (.bbl) be copied into the .tex
|
|
% document and the \bibliographystyle{} and \bibliography{} commands be
|
|
% commented out so that the .tex file does not depend on (potentially
|
|
% lengthy and/or confidential) external bibliography database files.
|
|
%
|
|
% 7) Adjusted some spacing parameters. The spacing above and below equations
|
|
% has been revised (to a typical IEEE value). \jot now has a decent value.
|
|
% The title text is now exactly 24pt. (On a related note, \fontsubfuzz has
|
|
% been increased to 0.9pt to prevent annoying font substitution warnings
|
|
% when using the Computer Modern fonts that use the 24.88pt size.)
|
|
% In V1.6, \small is now 8.5pt in 9pt docs because \footnotesize is 8pt.
|
|
% For 9pt docs, you should probably go ahead and use \footnotesize when you
|
|
% need text a little smaller than \normalsize.
|
|
% The interword spacing has been adjusted to be extremely close to that
|
|
% which IEEE uses. You can use a new class option, nofonttune, if you need
|
|
% to disable the adjusting of the interword spacing. This adjustment and
|
|
% an increase to \hyphenpenalty have greatly reduced the amount of
|
|
% hyphenation in a typical paper.
|
|
% The baselineskip for the normalsize fonts has been tweaked to reduce
|
|
% underfull vboxes on journal paper columns with only paragraphs.
|
|
% Conference mode does the same thing but by also tweaking the \textheight
|
|
% slightly off 9.25in (IEEE spec) to ensure an integer number of lines per
|
|
% page. Draft (also draftcls) mode has also been revised to reduce
|
|
% underfull vbox warnings. However, draft mode can still produce underfull
|
|
% vboxes (a direct result of the increase in line spacing and margins) if:
|
|
% A non-normalsize font occupies an entire column (abstract and index terms
|
|
% take up a whole column by themselves); or the beginning of a section
|
|
% occurs near the end of a column and cannot be squeezed into the bottom,
|
|
% etc. This is normal as draft mode's liberal spacings cannot guarantee
|
|
% perfect formatting.
|
|
%
|
|
% 8) New biographynophoto environment for biographies without photos.
|
|
% Usage:
|
|
%
|
|
% \begin{biographynophoto}{author name}
|
|
% biography text here
|
|
% \end{biographynophoto}
|
|
%
|
|
% 9) Fixed bug that produced multiple table of contents entries for papers
|
|
% with more than one biography. Also, biography now works better with
|
|
% hyperref.
|
|
%
|
|
%10) New \sublargesize font size command provides for 11pt text in a 10pt
|
|
% document. (Needed for things like author names.) For documents not
|
|
% using 10pt normal size text, \sublargesize is currently identical
|
|
% to \large.
|
|
%
|
|
%11) New \IEEEmembership command to provide correct font to indicate IEEE
|
|
% membership for journal papers.
|
|
%
|
|
%12) Fixed author name line overflow problem when in journal mode. This
|
|
% problem had been introduced in V1.5 in my rush to get \and to work for
|
|
% conferences. \and is unneeded (and invalid) in journal mode. For
|
|
% conference mode, \and will work as expected and features an optional
|
|
% spacing argument. i.e., \and[\hspace{5ex}]
|
|
% \and will default (recommended) to using \hfill which will result in
|
|
% equal spacing between author blocks.
|
|
%
|
|
%13) New \authorblockN, \authorblockA and \authorrefmark commands to
|
|
% facilitate easy formatting of author names, affiliations and cross
|
|
% reference symbols, respectively, when in conference mode. These
|
|
% three commands are to be used only for conference papers.
|
|
% In conference mode, \author text is placed within a modified tabular
|
|
% environment (somewhat like article.cls). So, within \author in conference
|
|
% mode, you should not try to enclose multiple \\ within an environment or
|
|
% command (other than the argument braces of \authorblockX{}). For example:
|
|
%
|
|
% \author{\authorblockN{{John Doe \\ Jane Doe}}} % WRONG!
|
|
%
|
|
% will generate an error.
|
|
%
|
|
% Note that font size/attribute changes will now persists across \\ within
|
|
% \author. (But, not across author blocks nor across \and.)
|
|
% However, with the new commands, there should be no need to alter any
|
|
% font attributes within \author. All text sizing and spacing within
|
|
% \author{} and the author block commands is per IEEE specs for both
|
|
% conference and journal modes. (In conference mode, the author names
|
|
% are only very slightly larger than the affiliations which are in normal
|
|
% size.) For specialized applications you can alter the justification of
|
|
% author lines by placing \hfill at the beginning or at the end of a line.
|
|
% The interline spacing within \author is determined by the font attributes
|
|
% that are in effect at the end of each line within author.
|
|
%
|
|
%14) Because the titles and author name blocks use different font sizes/styles
|
|
% from the main text, it was possible that two column papers with titles that
|
|
% span both columns (standard journal and conference papers, but not technotes)
|
|
% with certain numbers of lines for the title and authors' name/affiliations
|
|
% can cause underfull vbox problems (paragraphs with large spacings between
|
|
% them) in the second column of the main text on the title page - if there were
|
|
% no new sections, equations or figures in this column (they would provide some
|
|
% needed rubber spacing). The use of things like special paper notices and
|
|
% publisher ID marks also affected this issue. The problem could not happen
|
|
% in the first column because the first column has a rubber length around the
|
|
% heading of the first section. Furthermore, problems seldom occurred on pages
|
|
% after the first as the margins had been chosen not to cause it with the popular
|
|
% font sizes. Rubber lengths after the author names would not fix this problem.
|
|
% Auto-calculating a "good" spacing after the title is a tad difficult
|
|
% to do in LaTeX. However, I am pleased to report that V1.6 has this new
|
|
% capability - "dynamically determined title spacing". IEEEtran will now
|
|
% measure the height of all the title and author text in \maketitle
|
|
% and then calculate a rigid (non-rubber) spacer to follow that meets
|
|
% IEEE specs and also produces a \textheight on the title page that ensures
|
|
% an integer number of normalsized lines on the rest of the page. Single
|
|
% column papers, and two column papers with the title entirely in column
|
|
% one (technotes) do not need dynamic rigid spacing and therefore use
|
|
% standard rubber spacers.
|
|
%
|
|
% Note: This problem can still crop up if you use floats that span both
|
|
% columns (i.e., figure*). It has been a decade+ long limitation with LaTeX
|
|
% that the stretchable portion of \dbltextfloatsep is ignored.
|
|
% If you get a problem with underful vbox warnings and paragraphs that "are
|
|
% pulled apart" on page with a float that spans both columns, tweak the
|
|
% space between the figure and the main text a little:
|
|
%
|
|
% \vskip 5pt
|
|
% \end{figure*}
|
|
%
|
|
% If you can't find a value that fixes both columns, you are going to
|
|
% have to put a rubber spacer somewhere in one or both of the columns.
|
|
%
|
|
%15) Because of change #14 above, those of you using \pubid will, as of V1.6,
|
|
% have to place it *before* \maketitle in order for it have the intended
|
|
% affect. The dynamic spacer algorithm must see if you are using \pubid when
|
|
% \maketitle is called. \pubidadjcol works as before except that it now
|
|
% has additional logic to prevent it from doing anything if \pubid was never
|
|
% called.
|
|
%
|
|
%16) In some unusual, non-standard circumstances, an author may desire to
|
|
% alter the spacing after the title area or put some unusual text above
|
|
% the main text. For instance, to stop a bad break when a new section
|
|
% occurs right at the start of the second page. This is difficult to do
|
|
% when the title spans both columns of two column text since LaTeX treats
|
|
% such title text as a type of float. A new command, \IEEEaftertitletext{},
|
|
% gives access to the end of that produced by \maketitle. The types of
|
|
% things that can go into \IEEEaftertitletext are the same as those into
|
|
% \twocolumn[] - no \par, but \\ are OK. There is no restriction on the
|
|
% range of spacings that can be used.
|
|
% i.e., \IEEEaftertitletext{\vspace{-100pt}} will push the main text well
|
|
% into the title and \IEEEaftertitletext{\vspace{100pt}} will push it far down
|
|
% the page. You will have complete control. If used, place
|
|
% \IEEEaftertitletext{} before \maketitle like \title and \author. IEEEtran's
|
|
% dynamic title spacing intentionally does not take into consideration the
|
|
% contents of \IEEEaftertitletext{} when determining the spacer after the title
|
|
% area (otherwise it would try to second guess you), so the user will have
|
|
% manually adjust the height of the contents in \IEEEaftertitletext{} if the
|
|
% problem discussed in #14 above should develop. A safe bet is to keep
|
|
% the height of contents of \IEEEaftertitletext{} to integer multiples of
|
|
% \baselineskip, i.e., \IEEEaftertitletext{\vspace{-1\baselineskip}}
|
|
%
|
|
% Because it can result in an IEEE nonstandard format, the use of
|
|
% \IEEEaftertitletext{} is discouraged. Possible uses include (1) the use of
|
|
% IEEEtran for non-IEEE work with different title spacing requirements,
|
|
% or (2) as an emergency manual override if a problem should develop in
|
|
% IEEEtran's automatic spacing algorithm.
|
|
%
|
|
%17) completely rewritten \PARstart to:
|
|
% a. no longer have problems when the user begins an environment
|
|
% within the paragraph that uses \PARstart.
|
|
% b. auto-detect and use the current font family
|
|
% c. revise handling of the space at the end of the first word so that
|
|
% interword glue will now work as normal.
|
|
% d. produce correctly aligned edges for the (two) indented lines.
|
|
%
|
|
% Because the current font family is now auto-detected, there is no
|
|
% longer any need for \CMPARstart - it is now the same as \PARstart.
|
|
%
|
|
%18) There is now a new "open box" Q.E.D. symbol (\QEDopen) as well as the
|
|
% original default (\QED) closed one (\QEDclosed). Some journals use
|
|
% the open form. To make \proof use the open form, just do:
|
|
% \renewcommand{\QED}{\QEDopen}
|
|
%
|
|
%19) Additional \typeout{} notices added to warn the user when unusual
|
|
% settings/commands are detected or as reminders to avoid common errors
|
|
% when in conference mode.
|
|
%
|
|
%20) IEEEtran now provides \abovecaptionskip and \belowcaptionskip skip
|
|
% registers because article class provides them and some packages
|
|
% may error if they are missing. However, IEEEtran only uses
|
|
% \abovecaptionskip for actual caption spacing.
|
|
%
|
|
%21) Fixed bug that prevented users from redefining the section headings
|
|
% to use arabic digits. Thanks to Richardt H. Wilkinson for reporting
|
|
% this bug.
|
|
%
|
|
%22) Code cleaned up to be more efficient with the use of TeX registers;
|
|
% removed some old LaTeX 2.09 code; revised option processing to
|
|
% LaTeX2e standard; eliminated unwanted "phantom" spaces in some
|
|
% environments.
|
|
%
|
|
%23) Added new \IEEEeqnarray, \IEEEeqnarraybox, \IEEEeqnarrayboxm and
|
|
% \IEEEeqnarrayboxt environments to provide superior alternatives to the
|
|
% standard LaTeX \eqnarray, \array and \tabular. Additional new support
|
|
% commands include \IEEEeqnarraydecl, \IEEEeqnarrayboxdecl,
|
|
% \IEEEeqnarraymathstyle, \IEEEeqnarraytextstyle, \yesnumber. \IEEEnonumber,
|
|
% \IEEEyesnumber, \IEEEyessubnumber, \IEEEeqnarraynumspace, \IEEEeqnarraymulticol,
|
|
% \IEEEeqnarrayomit, \IEEEeqnarraydefcol, \IEEEeqnarraydefcolsep, \IEEEeqnarrayseprow,
|
|
% \IEEEeqnarrayseprowcut, \IEEEeqnarrayrulerow, \IEEEeqnarraydblrulerowcut,
|
|
% \IEEEeqnarraystrutmode, \IEEEeqnarraystrutsize, \IEEEeqnarraystrutsizeadd,
|
|
% \IEEEvisiblestrutstrue, \IEEEvisiblestrutsfalse and \IEEEstrut.
|
|
% These are documented in the user's guide.
|
|
%
|
|
%24) V1.6 changed back to using () around theorem names (which are also now in italics)
|
|
% as this is what IEEE is using now. Thanks to Christian Peel for reporting this.
|
|
% Also, when section numbers are used as the first part of theorem numbers, display
|
|
% them in arabic, not Roman.
|
|
%
|
|
%25) New \IEEEtriggeratref{X} command allows a page break to be triggered just
|
|
% before the given reference number "X". This is most useful when balancing
|
|
% the columns on the last page and a \newpage between references is desired.
|
|
% \IEEEtriggercmd{X} allows a different command to be executed at trigger.
|
|
%
|
|
%
|
|
%*******
|
|
% 7/2001 V1.5 (MDS) changes:
|
|
%
|
|
%
|
|
% 1) Fixed \and within \author bug: (! Misplaced \crcr. \endtabular ->\crcr)
|
|
% Thanks to Rainer Dorsch for discovering and reporting that \and
|
|
% did not work.
|
|
%
|
|
% 2) Fixed the biography environment so that if a biography's text is shorter
|
|
% than the area allocated for the photo, a collision with the next
|
|
% biography does not occur. You can now put real graphics (using the
|
|
% graphicx package) into the biography photo box with a new optional
|
|
% argument of the biography command! For example:
|
|
%
|
|
% \begin{biography}[{\includegraphics[width=1in,height=1.25in,clip,keepaspectratio]{./tux.eps}}]{Linux Penguin}
|
|
%
|
|
% will use the specified graphic as the author's photo. The photo area is
|
|
% exactly 1in wide by 1.25in high - as is done in IEEE Transactions. Try
|
|
% to keep the same 4:5 aspect ratio if scanning/cropping your photos.
|
|
% Note the need for the extra set of enclosing braces around the
|
|
% \includegraphics. Without it, The LaTeX parser may get confused when it
|
|
% sees the \includegraphics's brackets within the biography's optional
|
|
% argument. Due to the length of the \includegraphics command, you may wish
|
|
% to define your own shorthand form of it. I have not done so with IEEEtran
|
|
% to prevent dependence on the graphicx package. If you do not use the
|
|
% optional argument, or leave it empty, a standard frame box with the
|
|
% words "Place Photo Here" will be used. If you want the space to remain
|
|
% completely empty, you can do:
|
|
%
|
|
% \begin{biography}[\mbox{}]{The Invisible Man}
|
|
%
|
|
% The interface to biography's optional argument is into a
|
|
% 1in X 1.25in minipage in which the argument text is centered both
|
|
% horizontally and vertically:
|
|
%
|
|
% \begin{minipage}[b][1.25in][c]{1in}%
|
|
% \centering
|
|
% #1%
|
|
% \end{minipage}
|
|
%
|
|
% Within the biography environment, \unitlength is set to 1in.
|
|
% With this in mind, you can even design your own custom frameboxes.
|
|
% For instance:
|
|
%
|
|
% \begin{biography}[\framebox(1,1.25){\parbox[][\height][c]{0.9in}{\centering PLACE\\ PHOTO\\ HERE}}]{Author Name}
|
|
%
|
|
% will yield the same type of result as the default photo box.
|
|
%
|
|
% Thanks to Herbert Voss for discovering the collision bug, suggesting the ability
|
|
% to handle graphics and providing some prototype code.
|
|
%
|
|
%
|
|
%
|
|
%*******
|
|
% 3/2001 V1.4 (MDS) changes:
|
|
%
|
|
%
|
|
% 1) New "draftcls" and "final" options have been added.
|
|
% Thanks to Dragan Cvetkovic for suggesting an option like draftcls.
|
|
%
|
|
% 2) Documentation changes to reflect the fact that this IEEEtran.cls
|
|
% is no longer beta test.
|
|
%
|
|
% 3) Slightly revised caption sizes. Figure and table captions are now
|
|
% in \footnotesize, not \small as before.
|
|
%
|
|
% 4) Allow user to control figure caption justification. IEEEtran.cls
|
|
% normally defaults to left justified as is done in Transactions.
|
|
% However, for conferences, you may wish to issue the command:
|
|
% \centerfigcaptionstrue
|
|
% in the preamble. Short (less than one line long) figure captions
|
|
% will then be centered. Multi-line figure captions will always be
|
|
% properly left justified. V1.6: This is already done for you when
|
|
% using the conference mode.
|
|
%
|
|
%
|
|
%
|
|
%*******
|
|
% 1/2001 V1.3
|
|
% Michael Shell (MDS) made extensive changes and additions:
|
|
%
|
|
%
|
|
% BUGS FIXED (and many others too numerous to mention!):
|
|
% 1) Fixed improper alignment with itemized, enumerated and
|
|
% description lists. Added new controls to these three
|
|
% environments so that it is easy to get the alignment IEEE
|
|
% uses. Furthermore, the itemize, enumerate and description lists
|
|
% no longer force a new paragraph to begin at the end the list
|
|
% (\par). (Sometimes lists are used within paragraphs.)
|
|
%
|
|
% 2) JVH's fixes now allow things like $\mathbf{N}(0,P(0))$
|
|
% to work properly without needing the extra braces:
|
|
% ${\mathbf{N}}(0,P(0))$. There is no longer any dependence
|
|
% on the "rawfonts" and "oldlfont" packages. Thanks Juergen!
|
|
%
|
|
% 3) Fixed underfull hbox errors and incorrect reference number
|
|
% alignment when the number of references in the bibliography
|
|
% exceeded 9 entries (which is almost every paper!).
|
|
%
|
|
% 4) Removed dependence on the LaTeX sizexx.clo files.
|
|
% Now, 9pt documents should work correctly even on systems that
|
|
% lack a size9.clo file. This is most often used in conjunction
|
|
% with the option "technote" for "correspondence" papers like those
|
|
% in IEEE Transactions on Information Theory. For virtually all
|
|
% other papers, 10pt is used and so it is the default.
|
|
% Some improper font sizes have been corrected. \footnotesize is
|
|
% now 8pt in 9pt docs, so footnotes in technotes should be the
|
|
% correct size now.
|
|
%
|
|
% 5) Added \interlinepenalty within the bibliography section to discourage
|
|
% LaTeX from breaking within a reference. IEEE almost never breaks within
|
|
% a reference and when they do it is usually in technotes
|
|
% (correspondence papers). You may get an underfull vbox warning in the
|
|
% bibliography indicating that the spacing just before the "REFERENCES"
|
|
% section is larger than normal, but the final result will be more like
|
|
% what IEEE will publish. See the comments in the BIBLIOGRAPHY section
|
|
% around line 2034 below if you want to change this behavior.
|
|
%
|
|
% 6) No longer "blows up" when you use \paragraph and have a table
|
|
% of contents.
|
|
%
|
|
% 7) Theorem environment changed, (but for V1.6, back to the old way, sigh).
|
|
%
|
|
% 8) Figure captions adjusted: IEEE left (not center) justifies
|
|
% figure captions (for journals) and does not indent figure caption text.
|
|
%
|
|
% 9) Adjusted some spacings in the table of contents(TOC))/list-of-figures/
|
|
% list-of-tables so that section/table numbers will not so easily
|
|
% collide with the titles. Section VIII was usually the worst offender.
|
|
% Still doesn't right justify the section numbers, but neither does
|
|
% article.cls (This must be why LaTeX likes the x.y.z section numbering
|
|
% scheme unlike I, II, III, etc. of IEEE. )
|
|
% It may be "normal" as it is (left justified). sigh.
|
|
%
|
|
%10) Now uses "index terms" now as a heading instead of "keywords".
|
|
% Furthermore, the "index terms" and "abstract" headings are in bold
|
|
% italic. This is how IEEE does things.
|
|
%
|
|
%11) \thebibliography and \biography now put entries into
|
|
% the table of contents for you.
|
|
%
|
|
% *******
|
|
%
|
|
%
|
|
%
|
|
%
|
|
%
|
|
% *******
|
|
% 9/2000 (JVH) changes: (now designated as V1.2)
|
|
%
|
|
% made some corrections to get closer to LaTeX2e
|
|
% 20000906 Juergen v.Hagen
|
|
% vonhagen@ihefiji.etec.uni-karlsruhe.de
|
|
%
|
|
% Permission to redistribute granted as of December 2000.
|
|
% *******
|
|
%
|
|
%
|
|
%
|
|
%
|
|
%
|
|
% *******
|
|
%
|
|
% 1996 (JWD) LaTeX2e version: (now designated as V1.1)
|
|
%
|
|
% In the most recent TeXhax digest, there was a request for a copy of
|
|
% IEEEtrans.sty modified to work with LaTeX2e. I have a version I
|
|
% modified to make it IEEEtrans.cls, which I have sent to the person
|
|
% making the request and am now sending to you to consider posting to
|
|
% the archives.
|
|
% --
|
|
% Jon Dixon
|
|
% dixonj@colorado.edu
|
|
% http://spot.colorado.edu/~dixonj/
|
|
%
|
|
%*******
|
|
%
|
|
%
|
|
%
|
|
%
|
|
%
|
|
%*******
|
|
%
|
|
% 30-August-1993 original LaTeX 2.09 version (IEEEtran.sty),
|
|
% (now designated as V1.0):
|
|
%
|
|
% by Gerry Murray and Silvano Balemi
|
|
% Automatic Control Lab, ETH Zurich, Switzerland
|
|
% balemi@aut.ee.ethz.ch
|
|
%
|
|
%*******
|
|
%
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
%
|
|
%
|
|
%
|
|
%
|
|
%
|
|
\ProvidesClass{ieeeconf}[2016/4/23 revision V1.6b by Pradeep Misra]
|
|
%\ProvidesClass{IEEEtran}[2002/11/18 revision V1.6b by Michael Shell]
|
|
%\typeout{-- See the "IEEEtran_HOWTO" manual for usage information.}
|
|
%\typeout{-- The source comments contain changelog notes.}
|
|
\NeedsTeXFormat{LaTeX2e}
|
|
|
|
% define new needed flags to indicate document options
|
|
% and set a few "failsafe" defaults
|
|
\newif\if@twocolumnmode \global\@twocolumnmodetrue
|
|
\newif\if@draftversion \global\@draftversionfalse
|
|
\newif\if@draftclsmode \global\@draftclsmodefalse
|
|
\newif\if@draftclsmodefoot \global\@draftclsmodefootfalse
|
|
\newif\if@confmode \global\@confmodefalse
|
|
\newif\if@peerreviewoption \global\@peerreviewoptionfalse
|
|
\newif\if@peerreviewcaoption \global\@peerreviewcaoptionfalse
|
|
|
|
% we HAVE to turn off technote as there is no
|
|
% "not a tech note" option
|
|
\newif\if@technote \global\@technotefalse
|
|
|
|
% V1.6 we allow the user to control whether or not the
|
|
% font interword spacings are tuned to be more like
|
|
% that of IEEE. The default is to tune things.
|
|
\newif\if@fonttunesettings \global\@fonttunesettingstrue
|
|
|
|
% V1.6b flag to show if using a4paper
|
|
\newif\if@IEEEusingAfourpaper \global\@IEEEusingAfourpaperfalse
|
|
|
|
% IEEEtran class scratch pad registers
|
|
% dimen
|
|
\newdimen\@IEEEtrantmpdimenA
|
|
\newdimen\@IEEEtrantmpdimenB
|
|
% count
|
|
\newcount\@IEEEtrantmpcountA
|
|
\newcount\@IEEEtrantmpcountB
|
|
% token list
|
|
\newtoks\@IEEEtrantmptoksA
|
|
|
|
% we use \@IEEEptsize so that we can ID the point size (even for 9pt docs)
|
|
% as well as LaTeX's \@ptsize to retain some compatability with some
|
|
% external packages
|
|
\def\@IEEEptsize{10}
|
|
\def\@ptsize{0}
|
|
% LaTeX does not support 9pt, so we set \@ptsize to 0 - same as that of 10pt
|
|
\DeclareOption{9pt}{\def\@IEEEptsize{9}\def\@ptsize{0}}
|
|
\DeclareOption{10pt}{\def\@IEEEptsize{10}\def\@ptsize{0}}
|
|
\DeclareOption{11pt}{\def\@IEEEptsize{11}\def\@ptsize{1}}
|
|
\DeclareOption{12pt}{\def\@IEEEptsize{12}\def\@ptsize{2}}
|
|
|
|
|
|
% \@IEEEmarginE is the side margin for equal margins
|
|
% \@IEEEmarginW is the wider side margin when the margins are not equal
|
|
% NOTE: BOTH of the above margins are as they appear
|
|
% on the paper - they are NOT offset by 1 inch
|
|
%\DeclareOption{letterpaper}{\setlength{\paperheight}{11in}%
|
|
% \setlength{\paperwidth}{8.5in}%
|
|
% \def\@IEEEmarginE{0.680in}%
|
|
% \def\@IEEEmarginW{0.775in}%
|
|
% \@IEEEusingAfourpaperfalse}
|
|
%
|
|
%
|
|
%\DeclareOption{a4paper}{\setlength{\paperheight}{297mm}%
|
|
% \setlength{\paperwidth}{210mm}%
|
|
% \def\@IEEEmarginE{14.32mm}%
|
|
% \def\@IEEEmarginW{17mm}
|
|
% \@IEEEusingAfourpapertrue}
|
|
%
|
|
% [2004/1/15 revision V1.6b by Pradeep Misra]
|
|
\DeclareOption{letterpaper}{\setlength{\paperheight}{11in}%
|
|
\setlength{\paperwidth}{8.5in}%
|
|
% \setlength{\topmargin}{0in}%
|
|
\setlength{\topmargin}{-22pt}% HK May 15 2013
|
|
\def\@IEEEmarginE{0.75in}%
|
|
\def\@IEEEmarginW{0.75in}}
|
|
|
|
|
|
\DeclareOption{a4paper}{\setlength{\paperheight}{297mm}%
|
|
\setlength{\paperwidth}{210mm}%
|
|
% \setlength{\topmargin}{-0.69in}% HK May 15 2013
|
|
\setlength{\topmargin}{+32pt}% HK May 15 2013
|
|
\def\@IEEEmarginE{13.15mm}%
|
|
\def\@IEEEmarginW{0.75in}}
|
|
|
|
|
|
\DeclareOption{oneside}{\@twosidefalse \@mparswitchfalse}
|
|
\DeclareOption{twoside}{\@twosidetrue \@mparswitchtrue}
|
|
|
|
\DeclareOption{onecolumn}{\global\@twocolumnmodefalse}
|
|
% the file twocolumn.sty is not read as it changes \textwidth.
|
|
\DeclareOption{twocolumn}{\global\@twocolumnmodetrue}
|
|
|
|
% If the user selects draft, then this class AND any packages
|
|
% will go into draft mode.
|
|
\DeclareOption{draft}{\global\@draftversiontrue \global\@draftclsmodetrue
|
|
\global\@draftclsmodefoottrue}
|
|
% draftcls is for a draft mode which will not affect any packages
|
|
% used by the document.
|
|
\DeclareOption{draftcls}{\global\@draftversionfalse \global\@draftclsmodetrue
|
|
\global\@draftclsmodefoottrue}
|
|
% draftclsnofoot is like draftcls, but without the footer.
|
|
\DeclareOption{draftclsnofoot}{\global\@draftversionfalse \global\@draftclsmodetrue
|
|
\global\@draftclsmodefootfalse}
|
|
% we provide a final option just for completeness (article.cls has one)
|
|
\DeclareOption{final}{\global\@draftversionfalse \global\@draftclsmodefalse
|
|
\global\@draftclsmodefootfalse}
|
|
|
|
\DeclareOption{journal}{\global\@peerreviewoptionfalse \global\@peerreviewcaoptionfalse
|
|
\global\@confmodefalse \global\@technotefalse}
|
|
|
|
\DeclareOption{conference}{\global\@peerreviewoptionfalse \global\@peerreviewcaoptionfalse
|
|
\global\@confmodetrue \global\@technotefalse}
|
|
|
|
\DeclareOption{technote}{\global\@peerreviewoptionfalse \global\@peerreviewcaoptionfalse
|
|
\global\@confmodefalse \global\@technotetrue}
|
|
|
|
\DeclareOption{peerreview}{\global\@peerreviewoptiontrue \global\@peerreviewcaoptionfalse
|
|
\global\@confmodefalse \global\@technotefalse}
|
|
|
|
\DeclareOption{peerreviewca}{\global\@peerreviewoptiontrue \global\@peerreviewcaoptiontrue
|
|
\global\@confmodefalse \global\@technotefalse}
|
|
|
|
\DeclareOption{nofonttune}{\global\@fonttunesettingsfalse}
|
|
|
|
|
|
% IEEE uses Times font, so we'll default to times.
|
|
% These three commands make up the entire times.sty package.
|
|
\renewcommand{\sfdefault}{phv}
|
|
\renewcommand{\rmdefault}{ptm}
|
|
\renewcommand{\ttdefault}{pcr}
|
|
% enable Times now - so that all class options can see the correct font families
|
|
\normalfont\selectfont
|
|
|
|
|
|
% default to US letter paper, 10pt, twocolumn, one sided, final, journal
|
|
\ExecuteOptions{letterpaper,10pt,twocolumn,oneside,final,journal}
|
|
% overrride these defaults per user requests
|
|
\ProcessOptions
|
|
|
|
% we can send console reminder messages to the user here
|
|
\AtEndDocument{\if@confmode%
|
|
\typeout{}%
|
|
\typeout{** Conference Paper **}%
|
|
\typeout{Before submitting the final camera ready copy, remember to:}%
|
|
\typeout{}%
|
|
\typeout{ 1. Manually equalize the lengths of two columns on the last page}%
|
|
\typeout{ of your paper;}%
|
|
\typeout{}%
|
|
\typeout{ 2. Ensure that any PostScript and/or PDF output post-processing}%
|
|
\typeout{ uses only Type 1 fonts and that every step in the generation}%
|
|
\typeout{ process uses the US letter (8.5in X 11in) paper size.}%
|
|
\typeout{}%
|
|
\fi}
|
|
|
|
|
|
% warn about the use of single column other than for draft mode
|
|
\if@twocolumnmode\else%
|
|
\if@draftclsmode\else%
|
|
\typeout{** ATTENTION: Single column mode is not normally used with IEEE publications.}%
|
|
\fi%
|
|
\fi
|
|
|
|
|
|
% V1.6, if the user is using pdflatex, go ahead and set the output paper size.
|
|
% Otherwise, we declare the papersize via a \special for dvips.
|
|
% We keep the tests within braces because otherwise, if not using pdflatex,
|
|
% \pdfpageheight and \pdfpagewidth will be set to \relax - possibly affecting
|
|
% similar tests of other packages.
|
|
{\@ifundefined{pdfpageheight}{% not using pdflatex, setup paper size for dvips
|
|
\if@IEEEusingAfourpaper
|
|
\special{papersize=210mm,297mm}%
|
|
\else
|
|
\special{papersize=8.5in,11in}%
|
|
\fi}%
|
|
{% using pdftex, set paper size for pdftex
|
|
\global\pdfpageheight\paperheight\global\pdfpagewidth\paperwidth}}
|
|
|
|
|
|
|
|
% The idea hinted here is for LaTeX to generate markleft{} and markright{}
|
|
% automatically for you after you enter \author{}, \journal{},
|
|
% \journaldate{}, journalvol{}, \journalnum{}, etc.
|
|
% However, there may be some backward compatibility issues here as
|
|
% well as some special applications for IEEEtran.cls and special issues
|
|
% that may require the flexible \markleft{}, \markright{} and/or \markboth{}.
|
|
% We'll leave this as an open future suggestion.
|
|
%\newcommand{\journal}[1]{\def\@journal{#1}}
|
|
%\def\@journal{}
|
|
|
|
|
|
|
|
% pointsize values
|
|
% used with ifx to determine the document's normal size
|
|
\def\@IEEEptsizenine{9}
|
|
\def\@IEEEptsizeten{10}
|
|
\def\@IEEEptsizeeleven{11}
|
|
\def\@IEEEptsizetwelve{12}
|
|
|
|
|
|
|
|
% FONT DEFINITIONS (No sizexx.clo file needed)
|
|
% V1.6 revised font sizes, displayskip values and
|
|
% revised normalsize baselineskip to reduce underfull vbox problems
|
|
% on the 58pc = 696pt = 9.5in text height we want
|
|
% normalsize #lines/column baselineskip (aka leading)
|
|
% 9pt 63 11.0476pt (truncated down)
|
|
% 10pt 58 12pt (exact)
|
|
% 11pt 52 13.3846pt (truncated down)
|
|
% 12pt 50 13.92pt (exact)
|
|
%
|
|
|
|
% we need to store the nominal baselineskip for the given font size
|
|
% in case baselinestretch ever changes.
|
|
\newskip\@IEEEnormalsizefontbaselineskip
|
|
\@IEEEnormalsizefontbaselineskip\baselineskip
|
|
|
|
\ifx\@IEEEptsize\@IEEEptsizenine
|
|
\typeout{-- This is a 9 point document.}
|
|
\def\normalsize{\@setfontsize{\normalsize}{9}{11.0476pt}}%
|
|
\setlength{\@IEEEnormalsizefontbaselineskip}{11.0476pt}%
|
|
\normalsize
|
|
\abovedisplayskip 1.5ex plus3pt minus1pt%
|
|
\belowdisplayskip \abovedisplayskip%
|
|
\abovedisplayshortskip 0pt plus3pt%
|
|
\belowdisplayshortskip 1.5ex plus3pt minus1pt
|
|
\def\small{\@setfontsize{\small}{8.5}{10pt}}
|
|
\def\footnotesize{\@setfontsize{\footnotesize}{8}{9pt}}
|
|
\def\scriptsize{\@setfontsize{\scriptsize}{7}{8pt}}
|
|
\def\tiny{\@setfontsize{\tiny}{5}{6pt}}
|
|
% sublargesize is the same as large - 10pt
|
|
\def\sublargesize{\@setfontsize{\sublargesize}{10}{12pt}}
|
|
\def\large{\@setfontsize{\large}{10}{12pt}}
|
|
\def\Large{\@setfontsize{\Large}{12}{14pt}}
|
|
\def\LARGE{\@setfontsize{\LARGE}{14}{17pt}}
|
|
\def\huge{\@setfontsize{\huge}{17}{20pt}}
|
|
\def\Huge{\@setfontsize{\Huge}{20}{24pt}}
|
|
\fi
|
|
|
|
|
|
% Check if we have selected 10 points
|
|
\ifx\@IEEEptsize\@IEEEptsizeten
|
|
\typeout{-- This is a 10 point document.}
|
|
\def\normalsize{\@setfontsize{\normalsize}{10}{12.00pt}}%
|
|
\setlength{\@IEEEnormalsizefontbaselineskip}{12pt}%
|
|
\normalsize
|
|
\abovedisplayskip 1.5ex plus4pt minus2pt%
|
|
\belowdisplayskip \abovedisplayskip%
|
|
\abovedisplayshortskip 0pt plus4pt%
|
|
\belowdisplayshortskip 1.5ex plus4pt minus2pt
|
|
\def\small{\@setfontsize{\small}{9}{10pt}}
|
|
\def\footnotesize{\@setfontsize{\footnotesize}{8}{9pt}}
|
|
\def\scriptsize{\@setfontsize{\scriptsize}{7}{8pt}}
|
|
\def\tiny{\@setfontsize{\tiny}{5}{6pt}}
|
|
% sublargesize is a tad smaller than large - 11pt
|
|
\def\sublargesize{\@setfontsize{\sublargesize}{11}{13.4pt}}
|
|
\def\large{\@setfontsize{\large}{12}{14pt}}
|
|
\def\Large{\@setfontsize{\Large}{14}{17pt}}
|
|
\def\LARGE{\@setfontsize{\LARGE}{16}{20pt}}
|
|
\def\huge{\@setfontsize{\huge}{20}{24pt}}
|
|
\def\Huge{\@setfontsize{\Huge}{24}{28pt}}
|
|
\fi
|
|
|
|
|
|
% Check if we have selected 11 points
|
|
\ifx\@IEEEptsize\@IEEEptsizeeleven
|
|
\typeout{-- This is an 11 point document.}
|
|
\def\normalsize{\@setfontsize{\normalsize}{11}{13.3846pt}}%
|
|
\setlength{\@IEEEnormalsizefontbaselineskip}{13.3846pt}%
|
|
\normalsize
|
|
\abovedisplayskip 1.5ex plus5pt minus3pt%
|
|
\belowdisplayskip \abovedisplayskip%
|
|
\abovedisplayshortskip 0pt plus5pt%
|
|
\belowdisplayshortskip 1.5ex plus5pt minus3pt
|
|
\def\small{\@setfontsize{\small}{10}{12pt}}
|
|
\def\footnotesize{\@setfontsize{\footnotesize}{9}{10.5pt}}
|
|
\def\scriptsize{\@setfontsize{\scriptsize}{8}{9pt}}
|
|
\def\tiny{\@setfontsize{\tiny}{6}{7pt}}
|
|
% sublargesize is the same as large - 12pt
|
|
\def\sublargesize{\@setfontsize{\sublargesize}{12}{14pt}}
|
|
\def\large{\@setfontsize{\large}{12}{14pt}}
|
|
\def\Large{\@setfontsize{\Large}{14}{17pt}}
|
|
\def\LARGE{\@setfontsize{\LARGE}{17}{20pt}}
|
|
\def\huge{\@setfontsize{\huge}{20}{24pt}}
|
|
\def\Huge{\@setfontsize{\Huge}{24}{28pt}}
|
|
\fi
|
|
|
|
|
|
% Check if we have selected 12 points
|
|
\ifx\@IEEEptsize\@IEEEptsizetwelve
|
|
\typeout{-- This is a 12 point document.}
|
|
\def\normalsize{\@setfontsize{\normalsize}{12}{13.92pt}}%
|
|
\setlength{\@IEEEnormalsizefontbaselineskip}{13.92pt}%
|
|
\normalsize
|
|
\abovedisplayskip 1.5ex plus6pt minus4pt%
|
|
\belowdisplayskip \abovedisplayskip%
|
|
\abovedisplayshortskip 0pt plus6pt%
|
|
\belowdisplayshortskip 1.5ex plus6pt minus4pt
|
|
\def\small{\@setfontsize{\small}{10}{12pt}}
|
|
\def\footnotesize{\@setfontsize{\footnotesize}{9}{10.5pt}}
|
|
\def\scriptsize{\@setfontsize{\scriptsize}{8}{9pt}}
|
|
\def\tiny{\@setfontsize{\tiny}{6}{7pt}}
|
|
% sublargesize is the same as large - 14pt
|
|
\def\sublargesize{\@setfontsize{\sublargesize}{14}{17pt}}
|
|
\def\large{\@setfontsize{\large}{14}{17pt}}
|
|
\def\Large{\@setfontsize{\Large}{17}{20pt}}
|
|
\def\LARGE{\@setfontsize{\LARGE}{20}{24pt}}
|
|
\def\huge{\@setfontsize{\huge}{22}{26pt}}
|
|
\def\Huge{\@setfontsize{\Huge}{24}{28pt}}
|
|
\fi
|
|
|
|
|
|
% V1.6 The Computer Modern Fonts will issue a substitution warning for
|
|
% 24pt titles (24.88pt is used instead) increase the substitution
|
|
% tolerance to turn off this warning
|
|
\def\fontsubfuzz{.9pt}
|
|
% However, the default (and correct) Times font will scale exactly as needed.
|
|
|
|
|
|
% warn the user in case they forget to use the 9pt option with
|
|
% technote
|
|
\if@technote%
|
|
\ifx\@IEEEptsize\@IEEEptsizenine\else%
|
|
\typeout{** ATTENTION: Technotes are normally 9pt documents.}%
|
|
\fi%
|
|
\fi
|
|
|
|
|
|
% set \baselinestretch
|
|
\def\baselinestretch{1}
|
|
\if@draftclsmode% draft mode uses larger than normal spacing
|
|
\def\baselinestretch{1.5} % controls line spacing for draft version
|
|
\fi % some people may like 1.7 or greater
|
|
% so that there will be even more space
|
|
% for hand written comments
|
|
|
|
\normalsize % make \baselinestretch take affect
|
|
|
|
|
|
% V1.6
|
|
% store the normalsize baselineskip
|
|
\newskip\normalsizebaselineskip
|
|
\normalsizebaselineskip=\baselineskip\relax
|
|
% store the nominal value of jot
|
|
\newskip\normaljot
|
|
\normaljot=0.25\normalsizebaselineskip\relax
|
|
|
|
% set \jot
|
|
\jot=\normaljot\relax
|
|
|
|
|
|
% abstract and keywords are in \small, except
|
|
% for 9pt docs in which they are in \footnotesize
|
|
% Since 9pt docs use an 8pt footnotesize, \small
|
|
% becomes a rather awkward 8.5pt
|
|
\let\@IEEEabskeysecsize=\small
|
|
\ifx\@IEEEptsize\@IEEEptsizenine
|
|
\let\@IEEEabskeysecsize=\footnotesize
|
|
\fi
|
|
|
|
|
|
|
|
% V1.6, we are now going to fine tune the interword spacing
|
|
% The default interword glue for Times under TeX appears to use a
|
|
% nominal interword spacing of 25% (relative to the font size, i.e., 1em)
|
|
% a maximum of 40% and a minimum of 19%.
|
|
% For example, 10pt text uses an interword glue of:
|
|
%
|
|
% 2.5pt plus 1.49998pt minus 0.59998pt
|
|
%
|
|
% However, IEEE allows for a more generous range which reduces the need
|
|
% for hyphenation, especially for two column text. Furthermore, IEEE
|
|
% tends to use a little bit more nominal space between the words.
|
|
% IEEE's interword spacing percentages appear to be:
|
|
% 35% nominal
|
|
% 23% minimum
|
|
% 50% maximum
|
|
% (They may even be using a tad more for the largest fonts such as 24pt.)
|
|
%
|
|
% for bold text, IEEE increases the spacing a little more:
|
|
% 37.5% nominal
|
|
% 23% minimum
|
|
% 55% maximum
|
|
|
|
% here are the interword spacing ratios we'll use
|
|
% for medium (normal weight)
|
|
\def\@IEEEinterspaceratioM{0.35}
|
|
\def\@IEEEinterspaceMINratioM{0.23}
|
|
\def\@IEEEinterspaceMAXratioM{0.50}
|
|
|
|
% for bold
|
|
\def\@IEEEinterspaceratioB{0.375}
|
|
\def\@IEEEinterspaceMINratioB{0.23}
|
|
\def\@IEEEinterspaceMAXratioB{0.55}
|
|
|
|
|
|
% command to revise the interword spacing for the current font under TeX:
|
|
% \fontdimen2 = nominal interword space
|
|
% \fontdimen3 = interword stretch
|
|
% \fontdimen4 = interword shrink
|
|
% since all changes to the \fontdimen are global, we can enclose these commands
|
|
% in braces to confine any font attribute or length changes
|
|
\def\@@@IEEEsetfontdimens#1#2#3{{%
|
|
\setlength{\@IEEEtrantmpdimenB}{\f@size pt}% grab the font size in pt, could use 1em instead.
|
|
\setlength{\@IEEEtrantmpdimenA}{#1\@IEEEtrantmpdimenB}%
|
|
\fontdimen2\font=\@IEEEtrantmpdimenA\relax
|
|
\addtolength{\@IEEEtrantmpdimenA}{-#2\@IEEEtrantmpdimenB}%
|
|
\fontdimen3\font=-\@IEEEtrantmpdimenA\relax
|
|
\setlength{\@IEEEtrantmpdimenA}{#1\@IEEEtrantmpdimenB}%
|
|
\addtolength{\@IEEEtrantmpdimenA}{-#3\@IEEEtrantmpdimenB}%
|
|
\fontdimen4\font=\@IEEEtrantmpdimenA\relax}}
|
|
|
|
% revise the interword spacing for each font weight
|
|
\def\@@IEEEsetfontdimens{{%
|
|
\mdseries
|
|
\@@@IEEEsetfontdimens{\@IEEEinterspaceratioM}{\@IEEEinterspaceMAXratioM}{\@IEEEinterspaceMINratioM}%
|
|
\bfseries
|
|
\@@@IEEEsetfontdimens{\@IEEEinterspaceratioB}{\@IEEEinterspaceMAXratioB}{\@IEEEinterspaceMINratioB}%
|
|
}}
|
|
|
|
% revise the interword spacing for each font shape
|
|
% \slshape is not often used for IEEE work and is not altered here. The \scshape caps are
|
|
% already a tad too large in the free LaTeX fonts (as compared to what IEEE uses) so we
|
|
% won't alter these either.
|
|
\def\@IEEEsetfontdimens{{%
|
|
\normalfont
|
|
\@@IEEEsetfontdimens
|
|
\normalfont\itshape
|
|
\@@IEEEsetfontdimens
|
|
}}
|
|
|
|
% if the nofonttune class option is not given, revise the interword spacing
|
|
% for each font size (and shape and weight). Only the \rmfamily is done here
|
|
% as \ttfamily uses a fixed spacing and \sffamily is not used as the main
|
|
% text of IEEE papers.
|
|
\def\@IEEEtunefonts{%
|
|
\if@fonttunesettings
|
|
{\selectfont\rmfamily
|
|
\tiny\@IEEEsetfontdimens
|
|
\scriptsize\@IEEEsetfontdimens
|
|
\footnotesize\@IEEEsetfontdimens
|
|
\small\@IEEEsetfontdimens
|
|
\normalsize\@IEEEsetfontdimens
|
|
\sublargesize\@IEEEsetfontdimens
|
|
\large\@IEEEsetfontdimens
|
|
\LARGE\@IEEEsetfontdimens
|
|
\huge\@IEEEsetfontdimens
|
|
\Huge\@IEEEsetfontdimens}\fi}
|
|
|
|
% if needed, revise the interword spacing now - in case IEEEtran makes any default
|
|
% length measurements, and make sure all the default fonts are loaded
|
|
\@IEEEtunefonts
|
|
|
|
% and again at the start of the document in case the user loaded different fonts
|
|
\AtBeginDocument{\@IEEEtunefonts}
|
|
|
|
|
|
|
|
% V1.6
|
|
% LaTeX is a little to quick to use hyphenations
|
|
% So, we increase the penalty for their use and raise
|
|
% the badness level that triggers an underfull hbox
|
|
% warning. The author may still have to tweak things,
|
|
% but the appearance will be much better "right out
|
|
% of the box" than that under V1.5 and prior.
|
|
% TeX default is 50
|
|
\hyphenpenalty=750
|
|
% If we didn't adjust the interword spacing, 2200 might be better.
|
|
% The TeX default is 1000
|
|
\hbadness=1350
|
|
% IEEE does not use extra spacing after punctuation
|
|
\frenchspacing
|
|
|
|
|
|
% we want to maintain textheight as an integer multiple of
|
|
% \baselineskip. Keep \topsep in with this game plan too.
|
|
\topskip=\baselineskip
|
|
% set sizes and margins
|
|
% Book typesetting is a world where point and pica (12pt) reign supreme.
|
|
% IEEE textwidth is 21 pica. They have a colsep of 1 pica.
|
|
% V1.6 conference mode margins
|
|
\if@confmode
|
|
% [2004/10/15 revision V1.6c by Pradeep Misra]
|
|
%\topmargin -0.25in % HK May 15 2013
|
|
\textheight 9.5in % The standard for conferences
|
|
% However, we will adjust this a tad so that an integer number
|
|
% of lines will always fit on each page
|
|
% The baselineskip (leading) for each document point size is used
|
|
% to determine these values
|
|
% rounded up an extra 0.1pt or so to prevent trouble with any rounding errors
|
|
\ifx\@IEEEptsize\@IEEEptsizenine\textheight=682.0pt\fi %9.4722in 61 lines/page
|
|
\ifx\@IEEEptsize\@IEEEptsizeten\textheight=684.0pt\fi %9.5in 57 lines/page
|
|
\ifx\@IEEEptsize\@IEEEptsizeeleven\textheight=673.2pt\fi %9.2611in 51 lines/page
|
|
\ifx\@IEEEptsize\@IEEEptsizetwelve\textheight=676.8pt\fi %9.2473in 47 lines/page
|
|
\else
|
|
\topmargin -49.0pt
|
|
\textheight 58pc % = 9.63in or 696pt
|
|
\fi
|
|
|
|
% [2004/1/15 revision V1.6b by Pradeep Misra]
|
|
%\textwidth 43pc % 2 x 21pc + 1pc = 43pc
|
|
%\columnsep 1pc
|
|
|
|
\textwidth 7.0in % 2 x 21pc + 1pc = 43pc
|
|
\columnsep 0.2in
|
|
|
|
% IEEE MARGIN INFO and new \overrideIEEEmargins command
|
|
% V1.6 revised margins again
|
|
% IEEE wants the side margins to be equal under both US letter
|
|
% and A4 paper
|
|
%
|
|
% However, for those of you who need to bind copies of your work
|
|
% (for review distribution, etc.) the \overrideIEEEmargins
|
|
% command will shift the text a tad away from the binding
|
|
% edge.
|
|
%
|
|
%
|
|
|
|
|
|
% the default side margins are equal
|
|
\oddsidemargin \@IEEEmarginE
|
|
\addtolength{\oddsidemargin}{-1in}% compensate for LaTeX's 1in offset
|
|
\evensidemargin \@IEEEmarginE
|
|
\addtolength{\evensidemargin}{-1in}% compensate for LaTeX's 1in offset
|
|
|
|
% execute \overrideIEEEmargins in the preamble to make the side margin
|
|
% near the spine slightly wider so that the paper will be much more
|
|
% agreeable to being bound. \overrideIEEEmargins will have no effect
|
|
% when in draft or draftcls mode.
|
|
\def\overrideIEEEmargins{\if@draftclsmode\relax\else%
|
|
\typeout{** ATTENTION: Overriding IEEE standard margins (line \the\inputlineno).}%
|
|
\if@twoside
|
|
% for double sided, odd pages have the bound side on the left
|
|
% make this the wide margin
|
|
\oddsidemargin\@IEEEmarginW
|
|
% and even pages have the narrow margin on the left
|
|
% as they are bound on the right
|
|
% evensidemargin is to be the narrow margin
|
|
% calculate the narrow margin and set evensidemargin
|
|
\setlength{\evensidemargin}{\paperwidth}%
|
|
\addtolength{\evensidemargin}{-\@IEEEmarginW}%
|
|
\addtolength{\evensidemargin}{-\textwidth}%
|
|
\else
|
|
% for single sided the bound side is always on the left
|
|
% make this the wide margin
|
|
\oddsidemargin\@IEEEmarginW
|
|
\evensidemargin\@IEEEmarginW
|
|
\fi
|
|
\addtolength{\oddsidemargin}{-1.0in}% compensate for LaTeX's 1in offset
|
|
\addtolength{\evensidemargin}{-1.0in}%
|
|
\fi}
|
|
|
|
|
|
\parindent 1.0em
|
|
|
|
% conference papers do not have headers, other papers need
|
|
% to reserve space for them
|
|
\if@confmode
|
|
\headsep 0in
|
|
\headheight 0in
|
|
\else
|
|
\headsep 0.25in
|
|
\headheight 12pt
|
|
\fi
|
|
|
|
% V1.6, if things get too close, go ahead and let them touch
|
|
\lineskip 0pt
|
|
\normallineskip 0pt
|
|
\lineskiplimit 0pt
|
|
\normallineskiplimit 0pt
|
|
|
|
|
|
% The distance from the lower edge of the text body to the
|
|
% footline
|
|
\footskip 0.4in
|
|
|
|
% normally zero, should be relative to font height.
|
|
% put in a little rubber to help stop some bad breaks (underfull vboxes)
|
|
\parskip 0ex plus 0.2ex minus 0.1ex
|
|
|
|
|
|
|
|
% draft mode settings override that of all other modes
|
|
% provides a nice 1" margin all around the paper and extra
|
|
% space between the lines for editor's comments
|
|
\if@draftclsmode
|
|
\headsep 0.25in
|
|
\headheight 12pt
|
|
% want 1" from top of paper to text
|
|
\setlength{\topmargin}{-\headsep}%
|
|
\addtolength{\topmargin}{-\headheight}%
|
|
|
|
% we want 1in side margins regardless of paper type
|
|
\oddsidemargin 0in
|
|
\evensidemargin 0in
|
|
|
|
% set the text width - start with the entire page
|
|
\setlength{\textwidth}{\paperwidth}%
|
|
% subtract for the 1" top/bottom margins
|
|
\addtolength{\textwidth}{-2.0in}%
|
|
% give them a textheight that won't have underfull
|
|
% vbox problems, but can't help them if they later change
|
|
% baselinestretch from its default
|
|
\setlength{\textheight}{\paperheight}%
|
|
\addtolength{\textheight}{-2.0in}%
|
|
% subtract of first line taken by \topskip
|
|
\addtolength{\textheight}{-1\topskip}%
|
|
% now digitize \textheight so that the length after
|
|
% the first line is an integer multiple of \baselineskip
|
|
% to cut down on underfull vbox errors in draft mode
|
|
\divide\textheight by \baselineskip%
|
|
\multiply\textheight by \baselineskip%
|
|
% add back the first line
|
|
\addtolength{\textheight}{\topskip}%
|
|
\fi
|
|
|
|
|
|
|
|
% margin note stuff
|
|
\marginparsep 10pt
|
|
\marginparwidth 20pt
|
|
\marginparpush 25pt
|
|
|
|
|
|
% LIST SPACING CONTROLS
|
|
|
|
% Controls the amount of EXTRA spacing
|
|
% above and below \trivlist
|
|
% Both \list and IED lists override this.
|
|
% However, \trivlist will use this as will most
|
|
% things built from \trivlist like the \center
|
|
% environment.
|
|
\topsep 0.5\baselineskip
|
|
|
|
% Controls the additional spacing around lists preceded
|
|
% or followed by blank lines. IEEE does not increase
|
|
% spacing before or after paragraphs so it is set to zero.
|
|
% \z@ is the same as zero, but faster.
|
|
\partopsep \z@
|
|
|
|
% Controls the spacing between paragraphs in lists.
|
|
% IEEE does not increase spacing before or after paragraphs
|
|
% so this is also zero.
|
|
% With IEEEtran.cls, global changes to
|
|
% this value DO affect lists (but not IED lists).
|
|
\parsep \z@
|
|
|
|
% Controls the extra spacing between list items.
|
|
% IEEE does not put extra spacing between items.
|
|
% With IEEEtran.cls, global changes to this value DO affect
|
|
% lists (but not IED lists).
|
|
\itemsep \z@
|
|
|
|
% \itemindent is the amount to indent the FIRST line of a list
|
|
% item. It is auto set to zero within the \list environment. To alter
|
|
% it, you have to do so when you call the \list.
|
|
% However, IEEE uses this for the theorem environment
|
|
% There is an alternative value for this near \leftmargini below
|
|
\itemindent -1em
|
|
|
|
% \leftmargin, the spacing from the left margin of the main text to
|
|
% the left of the main body of a list item is set by \list.
|
|
% Hence this statement does nothing for lists.
|
|
% But, quote and verse do use it for indention.
|
|
\leftmargin 2em
|
|
|
|
% we retain this stuff from the older IEEEtran.cls so that \list
|
|
% will work the same way as before. However, itemize, enumerate and
|
|
% description (IED) could care less about what these are as they
|
|
% all are overridden.
|
|
\leftmargini 2em
|
|
%\itemindent 2em % Alternative values: sometimes used.
|
|
%\leftmargini 0em
|
|
\leftmarginii 1em
|
|
\leftmarginiii 1.5em
|
|
\leftmarginiv 1.5em
|
|
\leftmarginv 1.0em
|
|
\leftmarginvi 1.0em
|
|
\labelsep 0.5em
|
|
\labelwidth \z@
|
|
|
|
|
|
% The old IEEEtran.cls behavior of \list is retained.
|
|
% However, the new V1.3 IED list environments override all the
|
|
% @list stuff (\@listX is called within \list for the
|
|
% appropriate level just before the user's list_decl is called).
|
|
% \topsep is now 2pt as IEEE puts a little extra space around
|
|
% lists - used by those non-IED macros that depend on \list.
|
|
% Note that \parsep and \itemsep are not redefined as in
|
|
% the sizexx.clo \@listX (which article.cls uses) so global changes
|
|
% of these values DO affect \list
|
|
%
|
|
\def\@listi{\leftmargin\leftmargini \topsep 2pt plus 1pt minus 1pt}
|
|
\let\@listI\@listi
|
|
\def\@listii{\leftmargin\leftmarginii\labelwidth\leftmarginii%
|
|
\advance\labelwidth-\labelsep \topsep 2pt}
|
|
\def\@listiii{\leftmargin\leftmarginiii\labelwidth\leftmarginiii%
|
|
\advance\labelwidth-\labelsep \topsep 2pt}
|
|
\def\@listiv{\leftmargin\leftmarginiv\labelwidth\leftmarginiv%
|
|
\advance\labelwidth-\labelsep \topsep 2pt}
|
|
\def\@listv{\leftmargin\leftmarginv\labelwidth\leftmarginv%
|
|
\advance\labelwidth-\labelsep \topsep 2pt}
|
|
\def\@listvi{\leftmargin\leftmarginvi\labelwidth\leftmarginvi%
|
|
\advance\labelwidth-\labelsep \topsep 2pt}
|
|
|
|
|
|
% IEEE uses 5) not 5.
|
|
\def\labelenumi{\theenumi)} \def\theenumi{\arabic{enumi}}
|
|
|
|
% IEEE uses a) not (a)
|
|
\def\labelenumii{\theenumii)} \def\theenumii{\alph{enumii}}
|
|
|
|
% IEEE uses iii) not iii.
|
|
\def\labelenumiii{\theenumiii)} \def\theenumiii{\roman{enumiii}}
|
|
|
|
% IEEE uses A) not A.
|
|
\def\labelenumiv{\theenumiv)} \def\theenumiv{\Alph{enumiv}}
|
|
|
|
% exactly the same as in article.cls
|
|
\def\p@enumii{\theenumi}
|
|
\def\p@enumiii{\theenumi(\theenumii)}
|
|
\def\p@enumiv{\p@enumiii\theenumiii}
|
|
|
|
% itemized list label styles
|
|
\def\labelitemi{$\scriptstyle\bullet$}
|
|
\def\labelitemii{\textbf{--}}
|
|
\def\labelitemiii{$\ast$}
|
|
\def\labelitemiv{$\cdot$}
|
|
|
|
|
|
% IEEEtran.cls version numbers, provided as of V1.3
|
|
% These values serve as a way a .tex file can
|
|
% determine if the new features are provided.
|
|
% The version number of this IEEEtrans.cls can be obtained from
|
|
% these values. i.e., V1.4
|
|
% KEEP THESE AS INTEGERS! i.e., NO {4a} or anything like that-
|
|
% (no need to enumerate "a" minor changes here)
|
|
\def\IEEEtransversionmajor{1}
|
|
\def\IEEEtransversionminor{6}
|
|
|
|
|
|
% **** V1.3 ENHANCEMENTS ****
|
|
% Itemize, Enumerate and Description (IED) List Controls
|
|
% ***************************
|
|
%
|
|
%
|
|
% IEEE seems to use at least two different values by
|
|
% which ITEMIZED list labels are indented to the right
|
|
% For The Journal of Lightwave Technology (JLT) and The Journal
|
|
% on Selected Areas in Communications (JSAC), they tend to use
|
|
% an indention equal to \parindent. For Transactions on Communications
|
|
% they tend to indent ITEMIZED lists a little more--- 1.3\parindent.
|
|
% We'll provide both values here for you so that you can choose
|
|
% which one you like in your document using a command such as:
|
|
% setlength{\IEEEilabelindent}{\IEEEilabelindentB}
|
|
\newdimen\IEEEilabelindentA
|
|
\IEEEilabelindentA \parindent
|
|
|
|
\newdimen\IEEEilabelindentB
|
|
\IEEEilabelindentB 1.3\parindent
|
|
% However, we'll default to using \parindent
|
|
% which makes more sense to me
|
|
\newdimen\IEEEilabelindent
|
|
\IEEEilabelindent \IEEEilabelindentA
|
|
|
|
|
|
% This controls the default amount the enumerated list labels
|
|
% are indented to the right.
|
|
% Normally, this is the same as the paragraph indention
|
|
\newdimen\IEEEelabelindent
|
|
\IEEEelabelindent \parindent
|
|
|
|
% This controls the default amount the description list labels
|
|
% are indented to the right.
|
|
% Normally, this is the same as the paragraph indention
|
|
\newdimen\IEEEdlabelindent
|
|
\IEEEdlabelindent \parindent
|
|
|
|
% This is the value actually used within the IED lists.
|
|
% The IED environments automatically set its value to
|
|
% one of the three values above, so global changes do
|
|
% not have any effect
|
|
\newdimen\labelindent
|
|
\labelindent \parindent
|
|
|
|
% The actual amount labels will be indented is
|
|
% \labelindent multiplied by the factor below
|
|
% corresponding to the level of nesting depth
|
|
% This provides a means by which the user can
|
|
% alter the effective \labelindent for deeper
|
|
% levels
|
|
% There may not be such a thing as correct "standard IEEE"
|
|
% values. What IEEE actually does may depend on the specific
|
|
% circumstances.
|
|
% The first list level almost always has full indention.
|
|
% The second levels I've seen have only 75% of the normal indentation
|
|
% Three level or greater nestings are very rare. I am guessing
|
|
% that they don't use any indentation.
|
|
\def\IEEElabelindentfactori{1.0} % almost always one
|
|
\def\IEEElabelindentfactorii{0.75} % 0.0 or 1.0 may be used in some cases
|
|
\def\IEEElabelindentfactoriii{0.0} % 0.75? 0.5? 0.0?
|
|
\def\IEEElabelindentfactoriv{0.0}
|
|
\def\IEEElabelindentfactorv{0.0}
|
|
\def\IEEElabelindentfactorvi{0.0}
|
|
|
|
% value actually used within IED lists, it is auto
|
|
% set to one of the 6 values above
|
|
% global changes here have no effect
|
|
\def\labelindentfactor{1.0}
|
|
|
|
% This controls the default spacing between the end of the IED
|
|
% list labels and the list text, when normal text is used for
|
|
% the labels.
|
|
\newdimen\IEEEiednormlabelsep
|
|
\IEEEiednormlabelsep 0.6em
|
|
|
|
% This controls the default spacing between the end of the IED
|
|
% list labels and the list text, when math symbols are used for
|
|
% the labels (nomenclature lists). IEEE usually increases the
|
|
% spacing in these cases
|
|
\newdimen\IEEEiedmathlabelsep
|
|
\IEEEiedmathlabelsep 1.2em
|
|
|
|
% This controls the extra vertical separation put above and
|
|
% below each IED list. IEEE usually puts a little extra spacing
|
|
% around each list. However, this spacing is barely noticeable.
|
|
\newskip\IEEEiedtopsep
|
|
\IEEEiedtopsep 2pt plus 1pt minus 1pt
|
|
|
|
|
|
% This command is executed within each IED list environment
|
|
% at the beginning of the list. You can use this to set the
|
|
% parameters for some/all your IED list(s) without disturbing
|
|
% global parameters that affect things other than lists.
|
|
% i.e., renewcommand{\iedlistdecl}{\setlength{\labelsep}{5em}}
|
|
% will alter the \labelsep for the next list(s) until
|
|
% \iedlistdecl is redefined.
|
|
\def\iedlistdecl{\relax}
|
|
|
|
% This command provides an easy way to set \leftmargin based
|
|
% on the \labelwidth, \labelsep and the argument \labelindent
|
|
% Usage: \calcleftmargin{width-to-indent-the-label}
|
|
% output is in the \leftmargin variable, i.e., effectively:
|
|
% \leftmargin = argument + \labelwidth + \labelsep
|
|
% Note controlled spacing here, shield end of lines with %
|
|
\def\calcleftmargin#1{\setlength{\leftmargin}{#1}%
|
|
\addtolength{\leftmargin}{\labelwidth}%
|
|
\addtolength{\leftmargin}{\labelsep}}
|
|
|
|
% This command provides an easy way to set \labelwidth to the
|
|
% width of the given text. It is the same as
|
|
% \settowidth{\labelwidth}{label-text}
|
|
% and useful as a shorter alternative.
|
|
% Typically used to set \labelwidth to be the width
|
|
% of the longest label in the list
|
|
\def\setlabelwidth#1{\settowidth{\labelwidth}{#1}}
|
|
|
|
% When this command is executed, IED lists will use the
|
|
% IEEEiedmathlabelsep label separation rather than the normal
|
|
% spacing. To have an effect, this command must be executed via
|
|
% the \iedlistdecl or within the option of the IED list
|
|
% environments.
|
|
\def\usemathlabelsep{\setlength{\labelsep}{\IEEEiedmathlabelsep}}
|
|
|
|
% A flag which controls whether the IED lists automatically
|
|
% calculate \leftmargin from \labelindent, \labelwidth and \labelsep
|
|
% Useful if you want to specify your own \leftmargin
|
|
% This flag must be set (\nocalcleftmargintrue or \nocalcleftmarginfalse)
|
|
% via the \iedlistdecl or within the option of the IED list
|
|
% environments to have an effect.
|
|
\newif\ifnocalcleftmargin
|
|
\nocalcleftmarginfalse
|
|
|
|
% A flag which controls whether \labelindent is multiplied by
|
|
% the \labelindentfactor for each list level.
|
|
% This flag must be set via the \iedlistdecl or within the option
|
|
% of the IED list environments to have an effect.
|
|
\newif\ifnolabelindentfactor
|
|
\nolabelindentfactorfalse
|
|
|
|
|
|
% internal variable to indicate type of IED label
|
|
% justification
|
|
% 0 - left; 1 - center; 2 - right
|
|
\def\@iedjustify{0}
|
|
|
|
|
|
% commands to allow the user to control IED
|
|
% label justifications. Use these commands within
|
|
% the IED environment option or in the \iedlistdecl
|
|
% Note that changing the normal list justifications
|
|
% is nonstandard and IEEE may not like it if you do so!
|
|
% I include these commands as they may be helpful to
|
|
% those who are using these enhanced list controls for
|
|
% other non-IEEE related LaTeX work.
|
|
% itemize and enumerate automatically default to right
|
|
% justification, description defaults to left.
|
|
\def\iedlabeljustifyl{\def\@iedjustify{0}}%left
|
|
\def\iedlabeljustifyc{\def\@iedjustify{1}}%center
|
|
\def\iedlabeljustifyr{\def\@iedjustify{2}}%right
|
|
|
|
|
|
|
|
|
|
% commands to save to and restore from the list parameter copies
|
|
% this allows us to set all the list parameters within
|
|
% the list_decl and prevent \list (and its \@list)
|
|
% from overriding any of our parameters
|
|
% V1.6 use \edefs instead of dimen's to conserve dimen registers
|
|
% Note controlled spacing here, shield end of lines with %
|
|
\def\@IEEEsavelistparams{\edef\@IEEEiedtopsep{\the\topsep}%
|
|
\edef\@IEEEiedlabelwidth{\the\labelwidth}%
|
|
\edef\@IEEEiedlabelsep{\the\labelsep}%
|
|
\edef\@IEEEiedleftmargin{\the\leftmargin}%
|
|
\edef\@IEEEiedpartopsep{\the\partopsep}%
|
|
\edef\@IEEEiedparsep{\the\parsep}%
|
|
\edef\@IEEEieditemsep{\the\itemsep}%
|
|
\edef\@IEEEiedrightmargin{\the\rightmargin}%
|
|
\edef\@IEEEiedlistparindent{\the\listparindent}%
|
|
\edef\@IEEEieditemindent{\the\itemindent}}
|
|
|
|
% Note controlled spacing here
|
|
\def\@IEEErestorelistparams{\topsep\@IEEEiedtopsep\relax%
|
|
\labelwidth\@IEEEiedlabelwidth\relax%
|
|
\labelsep\@IEEEiedlabelsep\relax%
|
|
\leftmargin\@IEEEiedleftmargin\relax%
|
|
\partopsep\@IEEEiedpartopsep\relax%
|
|
\parsep\@IEEEiedparsep\relax%
|
|
\itemsep\@IEEEieditemsep\relax%
|
|
\rightmargin\@IEEEiedrightmargin\relax%
|
|
\listparindent\@IEEEiedlistparindent\relax%
|
|
\itemindent\@IEEEieditemindent\relax}
|
|
|
|
|
|
% v1.6b provide original LaTeX IED list environments
|
|
% note that latex.ltx defines \itemize and \enumerate, but not \description
|
|
% which must be created by the base classes
|
|
% save original LaTeX itemize and enumerate
|
|
\let\LaTeXitemize\itemize
|
|
\let\endLaTeXitemize\enditemize
|
|
\let\LaTeXenumerate\enumerate
|
|
\let\endLaTeXenumerate\endenumerate
|
|
|
|
% provide original LaTeX description environment from article.cls
|
|
\newenvironment{LaTeXdescription}
|
|
{\list{}{\labelwidth\z@ \itemindent-\leftmargin
|
|
\let\makelabel\descriptionlabel}}
|
|
{\endlist}
|
|
\newcommand*\descriptionlabel[1]{\hspace\labelsep
|
|
\normalfont\bfseries #1}
|
|
|
|
|
|
% override LaTeX's default IED lists
|
|
\def\itemize{\@IEEEitemize}
|
|
\def\enditemize{\@endIEEEitemize}
|
|
\def\enumerate{\@IEEEenumerate}
|
|
\def\endenumerate{\@endIEEEenumerate}
|
|
\def\description{\@IEEEdescription}
|
|
\def\enddescription{\@endIEEEdescription}
|
|
|
|
% provide the user with aliases - may help those using packages that
|
|
% override itemize, enumerate, or description
|
|
\def\IEEEitemize{\@IEEEitemize}
|
|
\def\endIEEEitemize{\@endIEEEitemize}
|
|
\def\IEEEenumerate{\@IEEEenumerate}
|
|
\def\endIEEEenumerate{\@endIEEEenumerate}
|
|
\def\IEEEdescription{\@IEEEdescription}
|
|
\def\endIEEEdescription{\@endIEEEdescription}
|
|
|
|
|
|
% V1.6 we want to keep the IEEEtran IED list definitions as our own internal
|
|
% commands so they are protected against redefinition
|
|
\def\@IEEEitemize{\@ifnextchar[{\@@IEEEitemize}{\@@IEEEitemize[\relax]}}
|
|
\def\@IEEEenumerate{\@ifnextchar[{\@@IEEEenumerate}{\@@IEEEenumerate[\relax]}}
|
|
\def\@IEEEdescription{\@ifnextchar[{\@@IEEEdescription}{\@@IEEEdescription[\relax]}}
|
|
\def\@endIEEEitemize{\endlist}
|
|
\def\@endIEEEenumerate{\endlist}
|
|
\def\@endIEEEdescription{\endlist}
|
|
|
|
|
|
% DO NOT ALLOW BLANK LINES TO BE IN THESE IED ENVIRONMENTS
|
|
% AS THIS WILL FORCE NEW PARAGRAPHS AFTER THE IED LISTS
|
|
% IEEEtran itemized list MDS 1/2001
|
|
% Note controlled spacing here, shield end of lines with %
|
|
\def\@@IEEEitemize[#1]{%
|
|
\ifnum\@itemdepth>3\relax\@toodeep\else%
|
|
\ifnum\@listdepth>5\relax\@toodeep\else%
|
|
\advance\@itemdepth\@ne%
|
|
\edef\@itemitem{labelitem\romannumeral\the\@itemdepth}%
|
|
% get the labelindentfactor for this level
|
|
\advance\@listdepth\@ne% we need to know what the level WILL be
|
|
\edef\labelindentfactor{\csname IEEElabelindentfactor\romannumeral\the\@listdepth\endcsname}%
|
|
\advance\@listdepth-\@ne% undo our increment
|
|
\def\@iedjustify{2}% right justified labels are default
|
|
% set other defaults
|
|
\nocalcleftmarginfalse%
|
|
\nolabelindentfactorfalse%
|
|
\topsep\IEEEiedtopsep%
|
|
\labelindent\IEEEilabelindent%
|
|
\labelsep\IEEEiednormlabelsep%
|
|
\partopsep 0ex%
|
|
\parsep 0ex%
|
|
\itemsep 0ex%
|
|
\rightmargin 0em%
|
|
\listparindent 0em%
|
|
\itemindent 0em%
|
|
% calculate the label width
|
|
% the user can override this later if
|
|
% they specified a \labelwidth
|
|
\settowidth{\labelwidth}{\csname labelitem\romannumeral\the\@itemdepth\endcsname}%
|
|
\@IEEEsavelistparams% save our list parameters
|
|
\list{\csname\@itemitem\endcsname}{%
|
|
\@IEEErestorelistparams% override any list{} changes
|
|
% to our globals
|
|
\let\makelabel\@IEEEiedmakelabel% v1.6b setup \makelabel
|
|
\iedlistdecl% let user alter parameters
|
|
#1\relax%
|
|
% If the user has requested not to use the
|
|
% labelindent factor, don't revise \labelindent
|
|
\ifnolabelindentfactor\relax%
|
|
\else\labelindent=\labelindentfactor\labelindent%
|
|
\fi%
|
|
% Unless the user has requested otherwise,
|
|
% calculate our left margin based
|
|
% on \labelindent, \labelwidth and
|
|
% \labelsep
|
|
\ifnocalcleftmargin\relax%
|
|
\else\calcleftmargin{\labelindent}%
|
|
\fi}\fi\fi}%
|
|
|
|
|
|
% DO NOT ALLOW BLANK LINES TO BE IN THESE IED ENVIRONMENTS
|
|
% AS THIS WILL FORCE NEW PARAGRAPHS AFTER THE IED LISTS
|
|
% IEEEtran enumerate list MDS 1/2001
|
|
% Note controlled spacing here, shield end of lines with %
|
|
\def\@@IEEEenumerate[#1]{%
|
|
\ifnum\@enumdepth>3\relax\@toodeep\else%
|
|
\ifnum\@listdepth>5\relax\@toodeep\else%
|
|
\advance\@enumdepth\@ne%
|
|
\edef\@enumctr{enum\romannumeral\the\@enumdepth}%
|
|
% get the labelindentfactor for this level
|
|
\advance\@listdepth\@ne% we need to know what the level WILL be
|
|
\edef\labelindentfactor{\csname IEEElabelindentfactor\romannumeral\the\@listdepth\endcsname}%
|
|
\advance\@listdepth-\@ne% undo our increment
|
|
\def\@iedjustify{2}% right justified labels are default
|
|
% set other defaults
|
|
\nocalcleftmarginfalse%
|
|
\nolabelindentfactorfalse%
|
|
\topsep\IEEEiedtopsep%
|
|
\labelindent\IEEEelabelindent%
|
|
\labelsep\IEEEiednormlabelsep%
|
|
\partopsep 0ex%
|
|
\parsep 0ex%
|
|
\itemsep 0ex%
|
|
\rightmargin 0em%
|
|
\listparindent 0em%
|
|
\itemindent 0em%
|
|
% calculate the label width
|
|
% We'll set it to the width suitable for all labels using
|
|
% normalfont 1) to 9)
|
|
% The user can override this later
|
|
\settowidth{\labelwidth}{9)}%
|
|
\@IEEEsavelistparams% save our list parameters
|
|
\list{\csname label\@enumctr\endcsname}{\usecounter{\@enumctr}%
|
|
\@IEEErestorelistparams% override any list{} changes
|
|
% to our globals
|
|
\let\makelabel\@IEEEiedmakelabel% v1.6b setup \makelabel
|
|
\iedlistdecl% let user alter parameters
|
|
#1\relax%
|
|
% If the user has requested not to use the
|
|
% labelindent factor, don't revise \labelindent
|
|
\ifnolabelindentfactor\relax%
|
|
\else\labelindent=\labelindentfactor\labelindent%
|
|
\fi%
|
|
% Unless the user has requested otherwise,
|
|
% calculate our left margin based
|
|
% on \labelindent, \labelwidth and
|
|
% \labelsep
|
|
\ifnocalcleftmargin\relax%
|
|
\else\calcleftmargin{\labelindent}%
|
|
\fi}\fi\fi}%
|
|
|
|
|
|
% DO NOT ALLOW BLANK LINES TO BE IN THESE IED ENVIRONMENTS
|
|
% AS THIS WILL FORCE NEW PARAGRAPHS AFTER THE IED LISTS
|
|
% IEEEtran description list MDS 1/2001
|
|
% Note controlled spacing here, shield end of lines with %
|
|
\def\@@IEEEdescription[#1]{%
|
|
\ifnum\@listdepth>5\relax\@toodeep\else%
|
|
% get the labelindentfactor for this level
|
|
\advance\@listdepth\@ne% we need to know what the level WILL be
|
|
\edef\labelindentfactor{\csname IEEElabelindentfactor\romannumeral\the\@listdepth\endcsname}%
|
|
\advance\@listdepth-\@ne% undo our increment
|
|
\def\@iedjustify{0}% left justified labels are default
|
|
% set other defaults
|
|
\nocalcleftmarginfalse%
|
|
\nolabelindentfactorfalse%
|
|
\topsep\IEEEiedtopsep%
|
|
\labelindent\IEEEdlabelindent%
|
|
% assume normal labelsep
|
|
\labelsep\IEEEiednormlabelsep%
|
|
\partopsep 0ex%
|
|
\parsep 0ex%
|
|
\itemsep 0ex%
|
|
\rightmargin 0em%
|
|
\listparindent 0em%
|
|
\itemindent 0em%
|
|
% Bogus label width in case the user forgets
|
|
% to set it.
|
|
% TIP: If you want to see what a variable's width is you
|
|
% can use the TeX command \showthe\width-variable to
|
|
% display it on the screen during compilation
|
|
% (This might be helpful to know when you need to find out
|
|
% which label is the widest)
|
|
\settowidth{\labelwidth}{Hello}%
|
|
\@IEEEsavelistparams% save our list parameters
|
|
\list{}{\@IEEErestorelistparams% override any list{} changes
|
|
% to our globals
|
|
\let\makelabel\@IEEEiedmakelabel% v1.6b setup \makelabel
|
|
\iedlistdecl% let user alter parameters
|
|
#1\relax%
|
|
% If the user has requested not to use the
|
|
% labelindent factor, don't revise \labelindent
|
|
\ifnolabelindentfactor\relax%
|
|
\else\labelindent=\labelindentfactor\labelindent%
|
|
\fi%
|
|
% Unless the user has requested otherwise,
|
|
% calculate our left margin based
|
|
% on \labelindent, \labelwidth and
|
|
% \labelsep
|
|
\ifnocalcleftmargin\relax%
|
|
\else\calcleftmargin{\labelindent}\relax%
|
|
\fi}\fi}
|
|
|
|
% v1.6b we use one makelabel that does justification as needed.
|
|
\def\@IEEEiedmakelabel#1{\relax\if\@iedjustify 0\relax
|
|
\makebox[\labelwidth][l]{\normalfont #1}\else
|
|
\if\@iedjustify 1\relax
|
|
\makebox[\labelwidth][c]{\normalfont #1}\else
|
|
\makebox[\labelwidth][r]{\normalfont #1}\fi\fi}
|
|
|
|
|
|
% VERSE and QUOTE
|
|
\def\verse{\let\\=\@centercr
|
|
\list{}{\itemsep\z@ \itemindent -1.5em \listparindent \itemindent
|
|
\rightmargin\leftmargin\advance\leftmargin 1.5em}\item[]}
|
|
\let\endverse\endlist
|
|
\def\quotation{\list{}{\listparindent 1.5em \itemindent\listparindent
|
|
\rightmargin\leftmargin \parsep 0pt plus 1pt}\item[]}
|
|
\let\endquotation=\endlist
|
|
\def\quote{\list{}{\rightmargin\leftmargin}\item[]}
|
|
\let\endquote=\endlist
|
|
|
|
|
|
% \titlepage
|
|
% provided only for backward compatibility. \maketitle is the correct
|
|
% way to create the title page.
|
|
\newif\if@restonecol
|
|
\def\titlepage{\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn
|
|
\else \newpage \fi \thispagestyle{empty}\c@page\z@}
|
|
\def\endtitlepage{\if@restonecol\twocolumn \else \newpage \fi}
|
|
|
|
% standard values from article.cls
|
|
\arraycolsep 5pt
|
|
\arrayrulewidth .4pt
|
|
\doublerulesep 2pt
|
|
|
|
\tabcolsep 6pt
|
|
\tabbingsep 0.5em
|
|
|
|
|
|
%% FOOTNOTES
|
|
%
|
|
%\skip\footins 10pt plus 4pt minus 2pt
|
|
% V1.6 respond to changes in font size
|
|
% space added above the footnotes (if present)
|
|
\skip\footins 0.9\baselineskip plus 0.4\baselineskip minus 0.2\baselineskip
|
|
|
|
% V1.6, we need to make \footnotesep responsive to changes
|
|
% in \baselineskip or strange spacings will result when in
|
|
% draft mode. Here is a little LaTeX secret - \footnotesep
|
|
% determines the height of an invisible strut that is placed
|
|
% *above* the baseline of footnotes after the first. Since
|
|
% LaTeX considers the space for characters to be 0.7/baselineskip
|
|
% above the baseline and 0.3/baselineskip below it, we need to
|
|
% use 0.7/baselineskip as a \footnotesep to maintain equal spacing
|
|
% between all the lines of the footnotes. IEEE often uses a tad
|
|
% more, so use 0.8\baselineskip. This slightly larger value also helps
|
|
% the text to clear the footnote marks. Note that \thanks now uses
|
|
% its own value of \footnotesep.
|
|
{\footnotesize
|
|
\global\footnotesep 0.8\baselineskip}
|
|
|
|
|
|
\skip\@mpfootins = \skip\footins
|
|
\fboxsep = 3pt
|
|
\fboxrule = .4pt
|
|
% V1.6 use 1em, the use LaTeX2e's \@makefnmark
|
|
% Note that IEEE normally *left* aligns the footnote marks, so we don't need
|
|
% box resizing tricks here.
|
|
\long\def\@makefntext#1{\parindent 1em\indent\hbox{\@makefnmark}#1}% V1.6 use 1em
|
|
|
|
\def\footnoterule{}
|
|
|
|
% V1.6 do not allow LaTeX to break a footnote across multiple pages
|
|
\interfootnotelinepenalty=10000
|
|
|
|
% V1.6 discourage breaks within equations
|
|
% Note that amsmath normally sets this to 10000,
|
|
% but LaTeX2e normally uses 100.
|
|
\interdisplaylinepenalty=2500
|
|
|
|
|
|
\if@technote
|
|
\setcounter{secnumdepth}{3}
|
|
\else
|
|
\setcounter{secnumdepth}{4}
|
|
\fi
|
|
|
|
|
|
\newcounter{section}
|
|
\newcounter{subsection}[section]
|
|
\newcounter{subsubsection}[subsection]
|
|
\newcounter{paragraph}[subsubsection]
|
|
|
|
% used only by IEEEtran's IEEEeqnarray as other packages may
|
|
% have their own, different, implementations
|
|
\newcounter{IEEEsubequation}[equation]
|
|
|
|
% as shown when called by user from \ref, \label and in table of contents
|
|
\def\thesection{\Roman{section}} % I
|
|
\def\thesubsection{\thesection-\Alph{subsection}} % I-A
|
|
\def\thesubsubsection{\thesubsection.\arabic{subsubsection}} % I-A.1
|
|
\def\theparagraph{\thesubsubsection.\alph{paragraph}} % I-A.1.a
|
|
\def\theequation{\arabic{equation}} % 1
|
|
\def\theIEEEsubequation{\theequation\alph{IEEEsubequation}} % 1a (used only by IEEEtran's IEEEeqnarray)
|
|
|
|
% Main text forms (how shown in main text headings)
|
|
% V1.6, using \thesection in \thesectiondis allows changes
|
|
% in the former to automatically appear in the latter
|
|
\def\thesectiondis{\thesection.} % I.
|
|
\def\thesubsectiondis{\Alph{subsection}.} % B.
|
|
\def\thesubsubsectiondis{\arabic{subsubsection})} % 3)
|
|
\def\theparagraphdis{\alph{paragraph})} % d)
|
|
% just like LaTeX2e's \@eqnnum
|
|
\def\theequationdis{{\normalfont \normalcolor (\theequation)}}% (1)
|
|
% IEEEsubequation used only by IEEEtran's IEEEeqnarray
|
|
\def\theIEEEsubequationdis{{\normalfont \normalcolor (\theIEEEsubequation)}}% (1a)
|
|
% redirect LaTeX2e's equation number display and all that depend on
|
|
% it, through IEEEtran's \theequationdis
|
|
\def\@eqnnum{\theequationdis}
|
|
|
|
% LIST OF FIGURES AND TABLES AND TABLE OF CONTENTS
|
|
%
|
|
\def\@pnumwidth{1.55em}
|
|
\def\@tocrmarg{2.55em}
|
|
\def\@dotsep{4.5}
|
|
\setcounter{tocdepth}{3}
|
|
|
|
% adjusted some spacings here so that section numbers will not easily
|
|
% collide with the section titles.
|
|
% VIII; VIII-A; and VIII-A.1 are usually the worst offenders.
|
|
% MDS 1/2001
|
|
\def\tableofcontents{\section*{Contents}\@starttoc{toc}}
|
|
\def\l@section#1#2{\addpenalty{\@secpenalty}\addvspace{1.0em plus 1pt}%
|
|
\@tempdima 2.75em \begingroup \parindent \z@ \rightskip \@pnumwidth%
|
|
\parfillskip-\@pnumwidth {\bfseries\leavevmode #1}\hfil\hbox to\@pnumwidth{\hss #2}\par%
|
|
\endgroup}
|
|
% argument format #1:level, #2:labelindent,#3:labelsep
|
|
\def\l@subsection{\@dottedtocline{2}{2.75em}{3.75em}}
|
|
\def\l@subsubsection{\@dottedtocline{3}{6.5em}{4.5em}}
|
|
% must provide \l@ defs for ALL sublevels EVEN if tocdepth
|
|
% is such as they will not appear in the table of contents
|
|
% these defs are how TOC knows what level these things are!
|
|
\def\l@paragraph{\@dottedtocline{4}{6.5em}{5.5em}}
|
|
\def\l@subparagraph{\@dottedtocline{5}{6.5em}{6.5em}}
|
|
\def\listoffigures{\section*{List of Figures}\@starttoc{lof}}
|
|
\def\l@figure{\@dottedtocline{1}{0em}{2.75em}}
|
|
\def\listoftables{\section*{List of Tables}\@starttoc{lot}}
|
|
\let\l@table\l@figure
|
|
|
|
|
|
%% Definitions for floats
|
|
%%
|
|
%% Normal Floats
|
|
\floatsep 1\baselineskip plus 0.2\baselineskip minus 0.2\baselineskip
|
|
\textfloatsep 1.7\baselineskip plus 0.2\baselineskip minus 0.4\baselineskip
|
|
\@fptop 0pt plus 1fil
|
|
\@fpsep 0.75\baselineskip plus 2fil
|
|
\@fpbot 0pt plus 1fil
|
|
\def\topfraction{1.0}
|
|
\def\bottomfraction{.4}
|
|
\def\floatpagefraction{0.8}
|
|
\def\textfraction{.2}
|
|
|
|
%% Double Column Floats
|
|
\dblfloatsep 1\baselineskip plus 0.2\baselineskip minus 0.2\baselineskip
|
|
|
|
\dbltextfloatsep 1.7\baselineskip plus 0.2\baselineskip minus 0.4\baselineskip
|
|
% Note that it would be nice if the rubber here actually worked in LaTeX2e.
|
|
% There is a long standing limitation in LaTeX, first discovered (to the best
|
|
% of my knowledge) by Alan Jeffrey in 1992. LaTeX ignores the stretchable
|
|
% portion of \dbltextfloatsep, and as a result, double column figures can and
|
|
% do result in an non-integer number of lines in the main text columns with
|
|
% underfull vbox errors as a consequence. A post to comp.text.tex
|
|
% by Donald Arseneau confirms that this had not yet been fixed in 1998.
|
|
% IEEEtran V1.6 will fix this problem for you in the titles, but it doesn't
|
|
% protect you from other double floats. Happy vspace'ing.
|
|
|
|
\@dblfptop 0pt plus 1fil
|
|
\@dblfpsep 0.75\baselineskip plus 2fil
|
|
\@dblfpbot 0pt plus 1fil
|
|
\def\dbltopfraction{1.0}
|
|
\def\dblfloatpagefraction{0.8}
|
|
\setcounter{dbltopnumber}{4}
|
|
|
|
\intextsep 1\baselineskip plus 0.2\baselineskip minus 0.2\baselineskip
|
|
\setcounter{topnumber}{2}
|
|
\setcounter{bottomnumber}{2}
|
|
\setcounter{totalnumber}{4}
|
|
|
|
|
|
%% redefine CAPTION
|
|
% V1.4 add user control for short figure caption justification
|
|
\newif\ifcenterfigcaptions
|
|
|
|
% V1.6 set the default according to conference mode
|
|
\if@confmode
|
|
\centerfigcaptionstrue
|
|
\else
|
|
\centerfigcaptionsfalse
|
|
\fi
|
|
|
|
% article class provides these, we should too.
|
|
\newlength\abovecaptionskip
|
|
\newlength\belowcaptionskip
|
|
% but only \abovecaptionskip is used above figure captions and *below* table
|
|
% captions
|
|
\setlength\abovecaptionskip{0.5\baselineskip}
|
|
\setlength\belowcaptionskip{0pt}
|
|
% V1.6 create hooks in case the caption spacing ever needs to be
|
|
% overridden by a user
|
|
\def\@IEEEfigurecaptionsepspace{\vskip\abovecaptionskip\relax}%
|
|
\def\@IEEEtablecaptionsepspace{\vskip\abovecaptionskip\relax}%
|
|
|
|
|
|
% 1.6b revise caption system so that \@makecaption uses two arguments
|
|
% as with LaTeX2e. Otherwise, there will be problems when using hyperref.
|
|
\def\@IEEEtablestring{table}
|
|
|
|
\long\def\@makecaption#1#2{%
|
|
% test if is a for a figure or table
|
|
\ifx\@captype\@IEEEtablestring%
|
|
% if a table, do table caption
|
|
\begin{center}{\footnotesize #1}\\{\footnotesize\scshape #2}\end{center}%
|
|
\@IEEEtablecaptionsepspace% V1.6 was a hard coded 8pt
|
|
% if not a table, format it as a figure
|
|
\else
|
|
\@IEEEfigurecaptionsepspace% V1.6 was a hard coded 5pt
|
|
% 3/2001 use footnotesize, not small; use two nonbreaking spaces, not one
|
|
\setbox\@tempboxa\hbox{\footnotesize #1.~~ #2}%
|
|
\ifdim \wd\@tempboxa >\hsize%
|
|
% if caption is longer than a line, let it wrap around
|
|
\setbox\@tempboxa\hbox{\footnotesize #1.~~ }%
|
|
\parbox[t]{\hsize}{\footnotesize \noindent\unhbox\@tempboxa#2}%
|
|
% if caption is shorter than a line,
|
|
% allow user to control short figure caption justification (left or center)
|
|
\else%
|
|
\ifcenterfigcaptions \hbox to\hsize{\footnotesize\hfil\box\@tempboxa\hfil}%
|
|
\else \hbox to\hsize{\footnotesize\box\@tempboxa\hfil}%
|
|
\fi\fi\fi}
|
|
|
|
|
|
\newcounter{figure}
|
|
\def\thefigure{\@arabic\c@figure}
|
|
\def\fps@figure{tbp}
|
|
\def\ftype@figure{1}
|
|
\def\ext@figure{lof}
|
|
\def\fnum@figure{Fig.~\thefigure}
|
|
\def\figure{\@float{figure}}
|
|
\let\endfigure\end@float
|
|
\@namedef{figure*}{\@dblfloat{figure}}
|
|
\@namedef{endfigure*}{\end@dblfloat}
|
|
\newcounter{table}
|
|
\def\thetable{\@Roman\c@table}
|
|
\def\fps@table{tbp}
|
|
\def\ftype@table{2}
|
|
\def\ext@table{lot}
|
|
\def\fnum@table{TABLE~\thetable}
|
|
% V1.6 IEEE uses 8pt text for tables
|
|
% to default to footnotesize, we hack into LaTeX2e's \@floatboxreset and pray
|
|
\def\table{\def\@floatboxreset{\reset@font\footnotesize\@setminipage}\@float{table}}
|
|
\let\endtable\end@float
|
|
% v1.6b double column tables need to default to footnotesize as well.
|
|
\@namedef{table*}{\def\@floatboxreset{\reset@font\footnotesize\@setminipage}\@dblfloat{table}}
|
|
\@namedef{endtable*}{\end@dblfloat}
|
|
|
|
|
|
|
|
|
|
%%
|
|
%% START OF IEEEeqnarry DEFINITIONS
|
|
%%
|
|
%% Inspired by the concepts, examples, and previous works of LaTeX
|
|
%% coders and developers such as Donald Arseneau, Fred Bartlett,
|
|
%% David Carlisle, Tony Liu, Frank Mittelbach, Piet van Oostrum,
|
|
%% Roland Winkler and Mark Wooding.
|
|
%% I don't make the claim that my work here is even near their calibre. ;)
|
|
|
|
|
|
% hook to allow easy changeover to IEEEtran.cls/tools.sty error reporting
|
|
\def\@IEEEclspkgerror{\ClassError{IEEEtran}}
|
|
|
|
\newif\if@IEEEeqnarraystarform% flag to indicate if the environment was called as the star form
|
|
\@IEEEeqnarraystarformfalse
|
|
|
|
\newif\if@advanceIEEEeqncolcnt% tracks if the environment should advance the col counter
|
|
% allows a way to make an \IEEEeqnarraybox that can be used within an \IEEEeqnarray
|
|
% used by IEEEeqnarraymulticol so that it can work properly in both
|
|
\@advanceIEEEeqncolcnttrue
|
|
|
|
\newcount\@IEEEeqnnumcols % tracks how many IEEEeqnarray cols are defined
|
|
\newcount\@IEEEeqncolcnt % tracks how many IEEEeqnarray cols the user actually used
|
|
|
|
|
|
% The default math style used by the columns
|
|
\def\IEEEeqnarraymathstyle{\displaystyle}
|
|
% The default text style used by the columns
|
|
% default to using the current font
|
|
\def\IEEEeqnarraytextstyle{\relax}
|
|
|
|
% like the iedlistdecl but for \IEEEeqnarray
|
|
\def\IEEEeqnarraydecl{\relax}
|
|
\def\IEEEeqnarrayboxdecl{\relax}
|
|
|
|
% \yesnumber is the opposite of \nonumber
|
|
% a novel concept with the same def as the equationarray package
|
|
% However, we give IEEE versions too since some LaTeX packages such as
|
|
% the MDWtools mathenv.sty redefine \nonumber to something else.
|
|
\providecommand{\yesnumber}{\global\@eqnswtrue}
|
|
\def\IEEEyesnumber{\global\@eqnswtrue}
|
|
\def\IEEEnonumber{\global\@eqnswfalse}
|
|
|
|
|
|
\def\IEEEyessubnumber{\global\@IEEEissubequationtrue\global\@eqnswtrue%
|
|
\if@IEEEeqnarrayISinner% only do something inside an IEEEeqnarray
|
|
\if@IEEElastlinewassubequation\addtocounter{equation}{-1}\else\setcounter{IEEEsubequation}{1}\fi%
|
|
\def\@currentlabel{\p@IEEEsubequation\theIEEEsubequation}\fi}
|
|
|
|
% flag to indicate that an equation is a sub equation
|
|
\newif\if@IEEEissubequation%
|
|
\@IEEEissubequationfalse
|
|
|
|
% allows users to "push away" equations that get too close to the equation numbers
|
|
\def\IEEEeqnarraynumspace{\hphantom{\if@IEEEissubequation\theIEEEsubequationdis\else\theequationdis\fi}}
|
|
|
|
% provides a way to span multiple columns within IEEEeqnarray environments
|
|
% will consider \if@advanceIEEEeqncolcnt before globally advancing the
|
|
% column counter - so as to work within \IEEEeqnarraybox
|
|
% usage: \IEEEeqnarraymulticol{number cols. to span}{col type}{cell text}
|
|
\long\def\IEEEeqnarraymulticol#1#2#3{\multispan{#1}%
|
|
% check if column is defined
|
|
\relax\expandafter\ifx\csname @IEEEeqnarraycolDEF#2\endcsname\@IEEEeqnarraycolisdefined%
|
|
\csname @IEEEeqnarraycolPRE#2\endcsname#3\relax\relax\relax\relax\relax%
|
|
\relax\relax\relax\relax\relax\csname @IEEEeqnarraycolPOST#2\endcsname%
|
|
\else% if not, error and use default type
|
|
\@IEEEclspkgerror{Invalid column type "#2" in \string\IEEEeqnarraymulticol.\MessageBreak
|
|
Using a default centering column instead}%
|
|
{You must define IEEEeqnarray column types before use.}%
|
|
\csname @IEEEeqnarraycolPRE@IEEEdefault\endcsname#3\relax\relax\relax\relax\relax%
|
|
\relax\relax\relax\relax\relax\csname @IEEEeqnarraycolPOST@IEEEdefault\endcsname%
|
|
\fi%
|
|
% advance column counter only if the IEEEeqnarray environment wants it
|
|
\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by #1\relax\fi}
|
|
|
|
% like \omit, but maintains track of the column counter for \IEEEeqnarray
|
|
\def\IEEEeqnarrayomit{\omit\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by 1\relax\fi}
|
|
|
|
|
|
% provides a way to define a letter referenced column type
|
|
% usage: \IEEEeqnarraydefcol{col. type letter/name}{pre insertion text}{post insertion text}
|
|
\def\IEEEeqnarraydefcol#1#2#3{\expandafter\def\csname @IEEEeqnarraycolPRE#1\endcsname{#2}%
|
|
\expandafter\def\csname @IEEEeqnarraycolPOST#1\endcsname{#3}%
|
|
\expandafter\def\csname @IEEEeqnarraycolDEF#1\endcsname{1}}
|
|
|
|
|
|
% provides a way to define a numerically referenced inter-column glue types
|
|
% usage: \IEEEeqnarraydefcolsep{col. glue number}{glue definition}
|
|
\def\IEEEeqnarraydefcolsep#1#2{\expandafter\def\csname @IEEEeqnarraycolSEP\romannumeral #1\endcsname{#2}%
|
|
\expandafter\def\csname @IEEEeqnarraycolSEPDEF\romannumeral #1\endcsname{1}}
|
|
|
|
|
|
\def\@IEEEeqnarraycolisdefined{1}% just a macro for 1, used for checking undefined column types
|
|
|
|
|
|
% expands and appends the given argument to the \@IEEEtrantmptoksA token list
|
|
% used to build up the \halign preamble
|
|
\def\@IEEEappendtoksA#1{\edef\@@IEEEappendtoksA{\@IEEEtrantmptoksA={\the\@IEEEtrantmptoksA #1}}%
|
|
\@@IEEEappendtoksA}
|
|
|
|
% also appends to \@IEEEtrantmptoksA, but does not expand the argument
|
|
% uses \toks8 as a scratchpad register
|
|
\def\@IEEEappendNOEXPANDtoksA#1{\toks8={#1}%
|
|
\edef\@@IEEEappendNOEXPANDtoksA{\@IEEEtrantmptoksA={\the\@IEEEtrantmptoksA\the\toks8}}%
|
|
\@@IEEEappendNOEXPANDtoksA}
|
|
|
|
% define some common column types for the user
|
|
% math
|
|
\IEEEeqnarraydefcol{l}{$\IEEEeqnarraymathstyle}{$\hfil}
|
|
\IEEEeqnarraydefcol{c}{\hfil$\IEEEeqnarraymathstyle}{$\hfil}
|
|
\IEEEeqnarraydefcol{r}{\hfil$\IEEEeqnarraymathstyle}{$}
|
|
\IEEEeqnarraydefcol{L}{$\IEEEeqnarraymathstyle{}}{{}$\hfil}
|
|
\IEEEeqnarraydefcol{C}{\hfil$\IEEEeqnarraymathstyle{}}{{}$\hfil}
|
|
\IEEEeqnarraydefcol{R}{\hfil$\IEEEeqnarraymathstyle{}}{{}$}
|
|
% text
|
|
\IEEEeqnarraydefcol{s}{\IEEEeqnarraytextstyle}{\hfil}
|
|
\IEEEeqnarraydefcol{t}{\hfil\IEEEeqnarraytextstyle}{\hfil}
|
|
\IEEEeqnarraydefcol{u}{\hfil\IEEEeqnarraytextstyle}{}
|
|
|
|
% vertical rules
|
|
\IEEEeqnarraydefcol{v}{}{\vrule width\arrayrulewidth}
|
|
\IEEEeqnarraydefcol{vv}{\vrule width\arrayrulewidth\hfil}{\hfil\vrule width\arrayrulewidth}
|
|
\IEEEeqnarraydefcol{V}{}{\vrule width\arrayrulewidth\hskip\doublerulesep\vrule width\arrayrulewidth}
|
|
\IEEEeqnarraydefcol{VV}{\vrule width\arrayrulewidth\hskip\doublerulesep\vrule width\arrayrulewidth\hfil}%
|
|
{\hfil\vrule width\arrayrulewidth\hskip\doublerulesep\vrule width\arrayrulewidth}
|
|
|
|
% horizontal rules
|
|
\IEEEeqnarraydefcol{h}{}{\leaders\hrule height\arrayrulewidth\hfil}
|
|
\IEEEeqnarraydefcol{H}{}{\leaders\vbox{\hrule width\arrayrulewidth\vskip\doublerulesep\hrule width\arrayrulewidth}\hfil}
|
|
|
|
% plain
|
|
\IEEEeqnarraydefcol{x}{}{}
|
|
\IEEEeqnarraydefcol{X}{$}{$}
|
|
|
|
% the default column type to use in the event a column type is not defined
|
|
\IEEEeqnarraydefcol{@IEEEdefault}{\hfil$\IEEEeqnarraymathstyle}{$\hfil}
|
|
|
|
|
|
% a zero tabskip (used for "-" col types)
|
|
\def\@IEEEeqnarraycolSEPzero{0pt plus 0pt minus 0pt}
|
|
% a centering tabskip (used for "+" col types)
|
|
\def\@IEEEeqnarraycolSEPcenter{1000pt plus 0pt minus 1000pt}
|
|
|
|
% top level default tabskip glues for the start, end, and inter-column
|
|
% may be reset within environments not always at the top level, e.g., \IEEEeqnarraybox
|
|
\edef\@IEEEeqnarraycolSEPdefaultstart{\@IEEEeqnarraycolSEPcenter}% default start glue
|
|
\edef\@IEEEeqnarraycolSEPdefaultend{\@IEEEeqnarraycolSEPcenter}% default end glue
|
|
\edef\@IEEEeqnarraycolSEPdefaultmid{\@IEEEeqnarraycolSEPzero}% default inter-column glue
|
|
|
|
|
|
|
|
% creates a vertical rule that extends from the bottom to the top a a cell
|
|
% Provided in case other packages redefine \vline some other way.
|
|
% usage: \IEEEeqnarrayvrule[rule thickness]
|
|
% If no argument is provided, \arrayrulewidth will be used for the rule thickness.
|
|
\newcommand\IEEEeqnarrayvrule[1][\arrayrulewidth]{\vrule\@width#1\relax}
|
|
|
|
% creates a blank separator row
|
|
% usage: \IEEEeqnarrayseprow[separation length][font size commands]
|
|
% default is \IEEEeqnarrayseprow[0.25\normalbaselineskip][\relax]
|
|
% blank arguments inherit the default values
|
|
% uses \skip5 as a scratch register - calls \@IEEEeqnarraystrutsize which uses more scratch registers
|
|
\def\IEEEeqnarrayseprow{\relax\@ifnextchar[{\@IEEEeqnarrayseprow}{\@IEEEeqnarrayseprow[0.25\normalbaselineskip]}}
|
|
\def\@IEEEeqnarrayseprow[#1]{\relax\@ifnextchar[{\@@IEEEeqnarrayseprow[#1]}{\@@IEEEeqnarrayseprow[#1][\relax]}}
|
|
\def\@@IEEEeqnarrayseprow[#1][#2]{\def\@IEEEeqnarrayseprowARGONE{#1}%
|
|
\ifx\@IEEEeqnarrayseprowARGONE\@empty%
|
|
% get the skip value, based on the font commands
|
|
% use skip5 because \IEEEeqnarraystrutsize uses \skip0, \skip2, \skip3
|
|
% assign within a bogus box to confine the font changes
|
|
{\setbox0=\hbox{#2\relax\global\skip5=0.25\normalbaselineskip}}%
|
|
\else%
|
|
{\setbox0=\hbox{#2\relax\global\skip5=#1}}%
|
|
\fi%
|
|
\@IEEEeqnarrayhoptolastcolumn\IEEEeqnarraystrutsize{\skip5}{0pt}[\relax]\relax}
|
|
|
|
% creates a blank separator row, but omits all the column templates
|
|
% usage: \IEEEeqnarrayseprowcut[separation length][font size commands]
|
|
% default is \IEEEeqnarrayseprowcut[0.25\normalbaselineskip][\relax]
|
|
% blank arguments inherit the default values
|
|
% uses \skip5 as a scratch register - calls \@IEEEeqnarraystrutsize which uses more scratch registers
|
|
\def\IEEEeqnarrayseprowcut{\multispan{\@IEEEeqnnumcols}\relax% span all the cols
|
|
% advance column counter only if the IEEEeqnarray environment wants it
|
|
\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by \@IEEEeqnnumcols\relax\fi%
|
|
\@ifnextchar[{\@IEEEeqnarrayseprowcut}{\@IEEEeqnarrayseprowcut[0.25\normalbaselineskip]}}
|
|
\def\@IEEEeqnarrayseprowcut[#1]{\relax\@ifnextchar[{\@@IEEEeqnarrayseprowcut[#1]}{\@@IEEEeqnarrayseprowcut[#1][\relax]}}
|
|
\def\@@IEEEeqnarrayseprowcut[#1][#2]{\def\@IEEEeqnarrayseprowARGONE{#1}%
|
|
\ifx\@IEEEeqnarrayseprowARGONE\@empty%
|
|
% get the skip value, based on the font commands
|
|
% use skip5 because \IEEEeqnarraystrutsize uses \skip0, \skip2, \skip3
|
|
% assign within a bogus box to confine the font changes
|
|
{\setbox0=\hbox{#2\relax\global\skip5=0.25\normalbaselineskip}}%
|
|
\else%
|
|
{\setbox0=\hbox{#2\relax\global\skip5=#1}}%
|
|
\fi%
|
|
\IEEEeqnarraystrutsize{\skip5}{0pt}[\relax]\relax}
|
|
|
|
|
|
|
|
% draws a single rule across all the columns optional
|
|
% argument determines the rule width, \arrayrulewidth is the default
|
|
% updates column counter as needed and turns off struts
|
|
% usage: \IEEEeqnarrayrulerow[rule line thickness]
|
|
\def\IEEEeqnarrayrulerow{\multispan{\@IEEEeqnnumcols}\relax% span all the cols
|
|
% advance column counter only if the IEEEeqnarray environment wants it
|
|
\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by \@IEEEeqnnumcols\relax\fi%
|
|
\@ifnextchar[{\@IEEEeqnarrayrulerow}{\@IEEEeqnarrayrulerow[\arrayrulewidth]}}
|
|
\def\@IEEEeqnarrayrulerow[#1]{\leaders\hrule height#1\hfil\relax% put in our rule
|
|
% turn off any struts
|
|
\IEEEeqnarraystrutsize{0pt}{0pt}[\relax]\relax}
|
|
|
|
|
|
% draws a double rule by using a single rule row, a separator row, and then
|
|
% another single rule row
|
|
% first optional argument determines the rule thicknesses, \arrayrulewidth is the default
|
|
% second optional argument determines the rule spacing, \doublerulesep is the default
|
|
% usage: \IEEEeqnarraydblrulerow[rule line thickness][rule spacing]
|
|
\def\IEEEeqnarraydblrulerow{\multispan{\@IEEEeqnnumcols}\relax% span all the cols
|
|
% advance column counter only if the IEEEeqnarray environment wants it
|
|
\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by \@IEEEeqnnumcols\relax\fi%
|
|
\@ifnextchar[{\@IEEEeqnarraydblrulerow}{\@IEEEeqnarraydblrulerow[\arrayrulewidth]}}
|
|
\def\@IEEEeqnarraydblrulerow[#1]{\relax\@ifnextchar[{\@@IEEEeqnarraydblrulerow[#1]}%
|
|
{\@@IEEEeqnarraydblrulerow[#1][\doublerulesep]}}
|
|
\def\@@IEEEeqnarraydblrulerow[#1][#2]{\def\@IEEEeqnarraydblrulerowARG{#1}%
|
|
% we allow the user to say \IEEEeqnarraydblrulerow[][]
|
|
\ifx\@IEEEeqnarraydblrulerowARG\@empty%
|
|
\@IEEEeqnarrayrulerow[\arrayrulewidth]%
|
|
\else%
|
|
\@IEEEeqnarrayrulerow[#1]\relax%
|
|
\fi%
|
|
\def\@IEEEeqnarraydblrulerowARG{#2}%
|
|
\ifx\@IEEEeqnarraydblrulerowARG\@empty%
|
|
\\\IEEEeqnarrayseprow[\doublerulesep][\relax]%
|
|
\else%
|
|
\\\IEEEeqnarrayseprow[#2][\relax]%
|
|
\fi%
|
|
\\\multispan{\@IEEEeqnnumcols}%
|
|
% advance column counter only if the IEEEeqnarray environment wants it
|
|
\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by \@IEEEeqnnumcols\relax\fi%
|
|
\def\@IEEEeqnarraydblrulerowARG{#1}%
|
|
\ifx\@IEEEeqnarraydblrulerowARG\@empty%
|
|
\@IEEEeqnarrayrulerow[\arrayrulewidth]%
|
|
\else%
|
|
\@IEEEeqnarrayrulerow[#1]%
|
|
\fi%
|
|
}
|
|
|
|
% draws a double rule by using a single rule row, a separator (cutting) row, and then
|
|
% another single rule row
|
|
% first optional argument determines the rule thicknesses, \arrayrulewidth is the default
|
|
% second optional argument determines the rule spacing, \doublerulesep is the default
|
|
% usage: \IEEEeqnarraydblrulerow[rule line thickness][rule spacing]
|
|
\def\IEEEeqnarraydblrulerowcut{\multispan{\@IEEEeqnnumcols}\relax% span all the cols
|
|
% advance column counter only if the IEEEeqnarray environment wants it
|
|
\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by \@IEEEeqnnumcols\relax\fi%
|
|
\@ifnextchar[{\@IEEEeqnarraydblrulerowcut}{\@IEEEeqnarraydblrulerowcut[\arrayrulewidth]}}
|
|
\def\@IEEEeqnarraydblrulerowcut[#1]{\relax\@ifnextchar[{\@@IEEEeqnarraydblrulerowcut[#1]}%
|
|
{\@@IEEEeqnarraydblrulerowcut[#1][\doublerulesep]}}
|
|
\def\@@IEEEeqnarraydblrulerowcut[#1][#2]{\def\@IEEEeqnarraydblrulerowARG{#1}%
|
|
% we allow the user to say \IEEEeqnarraydblrulerow[][]
|
|
\ifx\@IEEEeqnarraydblrulerowARG\@empty%
|
|
\@IEEEeqnarrayrulerow[\arrayrulewidth]%
|
|
\else%
|
|
\@IEEEeqnarrayrulerow[#1]%
|
|
\fi%
|
|
\def\@IEEEeqnarraydblrulerowARG{#2}%
|
|
\ifx\@IEEEeqnarraydblrulerowARG\@empty%
|
|
\\\IEEEeqnarrayseprowcut[\doublerulesep][\relax]%
|
|
\else%
|
|
\\\IEEEeqnarrayseprowcut[#2][\relax]%
|
|
\fi%
|
|
\\\multispan{\@IEEEeqnnumcols}%
|
|
% advance column counter only if the IEEEeqnarray environment wants it
|
|
\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by \@IEEEeqnnumcols\relax\fi%
|
|
\def\@IEEEeqnarraydblrulerowARG{#1}%
|
|
\ifx\@IEEEeqnarraydblrulerowARG\@empty%
|
|
\@IEEEeqnarrayrulerow[\arrayrulewidth]%
|
|
\else%
|
|
\@IEEEeqnarrayrulerow[#1]%
|
|
\fi%
|
|
}
|
|
|
|
|
|
|
|
% inserts a full row's worth of &'s
|
|
% relies on \@IEEEeqnnumcols to provide the correct number of columns
|
|
% uses \@IEEEtrantmptoksA, \count0 as scratch registers
|
|
\def\@IEEEeqnarrayhoptolastcolumn{\@IEEEtrantmptoksA={}\count0=1\relax%
|
|
\loop% add cols if the user did not use them all
|
|
\ifnum\count0<\@IEEEeqnnumcols\relax%
|
|
\@IEEEappendtoksA{&}%
|
|
\advance\count0 by 1\relax% update the col count
|
|
\repeat%
|
|
\the\@IEEEtrantmptoksA%execute the &'s
|
|
}
|
|
|
|
|
|
|
|
\newif\if@IEEEeqnarrayISinner % flag to indicate if we are within the lines
|
|
\@IEEEeqnarrayISinnerfalse % of an IEEEeqnarray - after the IEEEeqnarraydecl
|
|
|
|
\edef\@IEEEeqnarrayTHEstrutheight{0pt} % height and depth of IEEEeqnarray struts
|
|
\edef\@IEEEeqnarrayTHEstrutdepth{0pt}
|
|
|
|
\edef\@IEEEeqnarrayTHEmasterstrutheight{0pt} % default height and depth of
|
|
\edef\@IEEEeqnarrayTHEmasterstrutdepth{0pt} % struts within an IEEEeqnarray
|
|
|
|
\edef\@IEEEeqnarrayTHEmasterstrutHSAVE{0pt} % saved master strut height
|
|
\edef\@IEEEeqnarrayTHEmasterstrutDSAVE{0pt} % and depth
|
|
|
|
\newif\if@IEEEeqnarrayusemasterstrut % flag to indicate that the master strut value
|
|
\@IEEEeqnarrayusemasterstruttrue % is to be used
|
|
|
|
|
|
|
|
% saves the strut height and depth of the master strut
|
|
\def\@IEEEeqnarraymasterstrutsave{\relax%
|
|
\expandafter\skip0=\@IEEEeqnarrayTHEmasterstrutheight\relax%
|
|
\expandafter\skip2=\@IEEEeqnarrayTHEmasterstrutdepth\relax%
|
|
% remove stretchability
|
|
\dimen0\skip0\relax%
|
|
\dimen2\skip2\relax%
|
|
% save values
|
|
\edef\@IEEEeqnarrayTHEmasterstrutHSAVE{\the\dimen0}%
|
|
\edef\@IEEEeqnarrayTHEmasterstrutDSAVE{\the\dimen2}}
|
|
|
|
% restores the strut height and depth of the master strut
|
|
\def\@IEEEeqnarraymasterstrutrestore{\relax%
|
|
\expandafter\skip0=\@IEEEeqnarrayTHEmasterstrutHSAVE\relax%
|
|
\expandafter\skip2=\@IEEEeqnarrayTHEmasterstrutDSAVE\relax%
|
|
% remove stretchability
|
|
\dimen0\skip0\relax%
|
|
\dimen2\skip2\relax%
|
|
% restore values
|
|
\edef\@IEEEeqnarrayTHEmasterstrutheight{\the\dimen0}%
|
|
\edef\@IEEEeqnarrayTHEmasterstrutdepth{\the\dimen2}}
|
|
|
|
|
|
% globally restores the strut height and depth to the
|
|
% master values and sets the master strut flag to true
|
|
\def\@IEEEeqnarraystrutreset{\relax%
|
|
\expandafter\skip0=\@IEEEeqnarrayTHEmasterstrutheight\relax%
|
|
\expandafter\skip2=\@IEEEeqnarrayTHEmasterstrutdepth\relax%
|
|
% remove stretchability
|
|
\dimen0\skip0\relax%
|
|
\dimen2\skip2\relax%
|
|
% restore values
|
|
\xdef\@IEEEeqnarrayTHEstrutheight{\the\dimen0}%
|
|
\xdef\@IEEEeqnarrayTHEstrutdepth{\the\dimen2}%
|
|
\global\@IEEEeqnarrayusemasterstruttrue}
|
|
|
|
|
|
% if the master strut is not to be used, make the current
|
|
% values of \@IEEEeqnarrayTHEstrutheight, \@IEEEeqnarrayTHEstrutdepth
|
|
% and the use master strut flag, global
|
|
% this allows user strut commands issued in the last column to be carried
|
|
% into the isolation/strut column
|
|
\def\@IEEEeqnarrayglobalizestrutstatus{\relax%
|
|
\if@IEEEeqnarrayusemasterstrut\else%
|
|
\xdef\@IEEEeqnarrayTHEstrutheight{\@IEEEeqnarrayTHEstrutheight}%
|
|
\xdef\@IEEEeqnarrayTHEstrutdepth{\@IEEEeqnarrayTHEstrutdepth}%
|
|
\global\@IEEEeqnarrayusemasterstrutfalse%
|
|
\fi}
|
|
|
|
|
|
|
|
% usage: \IEEEeqnarraystrutsize{height}{depth}[font size commands]
|
|
% If called outside the lines of an IEEEeqnarray, sets the height
|
|
% and depth of both the master and local struts. If called inside
|
|
% an IEEEeqnarray line, sets the height and depth of the local strut
|
|
% only and sets the flag to indicate the use of the local strut
|
|
% values. If the height or depth is left blank, 0.7\normalbaselineskip
|
|
% and 0.3\normalbaselineskip will be used, respectively.
|
|
% The optional argument can be used to evaluate the lengths under
|
|
% a different font size and styles. If none is specified, the current
|
|
% font is used.
|
|
% uses scratch registers \skip0, \skip2, \skip3, \dimen0, \dimen2
|
|
\def\IEEEeqnarraystrutsize#1#2{\relax\@ifnextchar[{\@IEEEeqnarraystrutsize{#1}{#2}}{\@IEEEeqnarraystrutsize{#1}{#2}[\relax]}}
|
|
\def\@IEEEeqnarraystrutsize#1#2[#3]{\def\@IEEEeqnarraystrutsizeARG{#1}%
|
|
\ifx\@IEEEeqnarraystrutsizeARG\@empty%
|
|
{\setbox0=\hbox{#3\relax\global\skip3=0.7\normalbaselineskip}}%
|
|
\skip0=\skip3\relax%
|
|
\else% arg one present
|
|
{\setbox0=\hbox{#3\relax\global\skip3=#1\relax}}%
|
|
\skip0=\skip3\relax%
|
|
\fi% if null arg
|
|
\def\@IEEEeqnarraystrutsizeARG{#2}%
|
|
\ifx\@IEEEeqnarraystrutsizeARG\@empty%
|
|
{\setbox0=\hbox{#3\relax\global\skip3=0.3\normalbaselineskip}}%
|
|
\skip2=\skip3\relax%
|
|
\else% arg two present
|
|
{\setbox0=\hbox{#3\relax\global\skip3=#2\relax}}%
|
|
\skip2=\skip3\relax%
|
|
\fi% if null arg
|
|
% remove stretchability, just to be safe
|
|
\dimen0\skip0\relax%
|
|
\dimen2\skip2\relax%
|
|
% dimen0 = height, dimen2 = depth
|
|
\if@IEEEeqnarrayISinner% inner does not touch master strut size
|
|
\edef\@IEEEeqnarrayTHEstrutheight{\the\dimen0}%
|
|
\edef\@IEEEeqnarrayTHEstrutdepth{\the\dimen2}%
|
|
\@IEEEeqnarrayusemasterstrutfalse% do not use master
|
|
\else% outer, have to set master strut too
|
|
\edef\@IEEEeqnarrayTHEmasterstrutheight{\the\dimen0}%
|
|
\edef\@IEEEeqnarrayTHEmasterstrutdepth{\the\dimen2}%
|
|
\edef\@IEEEeqnarrayTHEstrutheight{\the\dimen0}%
|
|
\edef\@IEEEeqnarrayTHEstrutdepth{\the\dimen2}%
|
|
\@IEEEeqnarrayusemasterstruttrue% use master strut
|
|
\fi}
|
|
|
|
|
|
% usage: \IEEEeqnarraystrutsizeadd{added height}{added depth}[font size commands]
|
|
% If called outside the lines of an IEEEeqnarray, adds the given height
|
|
% and depth to both the master and local struts.
|
|
% If called inside an IEEEeqnarray line, adds the given height and depth
|
|
% to the local strut only and sets the flag to indicate the use
|
|
% of the local strut values.
|
|
% In both cases, if a height or depth is left blank, 0pt is used instead.
|
|
% The optional argument can be used to evaluate the lengths under
|
|
% a different font size and styles. If none is specified, the current
|
|
% font is used.
|
|
% uses scratch registers \skip0, \skip2, \skip3, \dimen0, \dimen2
|
|
\def\IEEEeqnarraystrutsizeadd#1#2{\relax\@ifnextchar[{\@IEEEeqnarraystrutsizeadd{#1}{#2}}{\@IEEEeqnarraystrutsizeadd{#1}{#2}[\relax]}}
|
|
\def\@IEEEeqnarraystrutsizeadd#1#2[#3]{\def\@IEEEeqnarraystrutsizearg{#1}%
|
|
\ifx\@IEEEeqnarraystrutsizearg\@empty%
|
|
\skip0=0pt\relax%
|
|
\else% arg one present
|
|
{\setbox0=\hbox{#3\relax\global\skip3=#1}}%
|
|
\skip0=\skip3\relax%
|
|
\fi% if null arg
|
|
\def\@IEEEeqnarraystrutsizearg{#2}%
|
|
\ifx\@IEEEeqnarraystrutsizearg\@empty%
|
|
\skip2=0pt\relax%
|
|
\else% arg two present
|
|
{\setbox0=\hbox{#3\relax\global\skip3=#2}}%
|
|
\skip2=\skip3\relax%
|
|
\fi% if null arg
|
|
% remove stretchability, just to be safe
|
|
\dimen0\skip0\relax%
|
|
\dimen2\skip2\relax%
|
|
% dimen0 = height, dimen2 = depth
|
|
\if@IEEEeqnarrayISinner% inner does not touch master strut size
|
|
% get local strut size
|
|
\expandafter\skip0=\@IEEEeqnarrayTHEstrutheight\relax%
|
|
\expandafter\skip2=\@IEEEeqnarrayTHEstrutdepth\relax%
|
|
% add it to the user supplied values
|
|
\advance\dimen0 by \skip0\relax%
|
|
\advance\dimen2 by \skip2\relax%
|
|
% update the local strut size
|
|
\edef\@IEEEeqnarrayTHEstrutheight{\the\dimen0}%
|
|
\edef\@IEEEeqnarrayTHEstrutdepth{\the\dimen2}%
|
|
\@IEEEeqnarrayusemasterstrutfalse% do not use master
|
|
\else% outer, have to set master strut too
|
|
% get master strut size
|
|
\expandafter\skip0=\@IEEEeqnarrayTHEmasterstrutheight\relax%
|
|
\expandafter\skip2=\@IEEEeqnarrayTHEmasterstrutdepth\relax%
|
|
% add it to the user supplied values
|
|
\advance\dimen0 by \skip0\relax%
|
|
\advance\dimen2 by \skip2\relax%
|
|
% update the local and master strut sizes
|
|
\edef\@IEEEeqnarrayTHEmasterstrutheight{\the\dimen0}%
|
|
\edef\@IEEEeqnarrayTHEmasterstrutdepth{\the\dimen2}%
|
|
\edef\@IEEEeqnarrayTHEstrutheight{\the\dimen0}%
|
|
\edef\@IEEEeqnarrayTHEstrutdepth{\the\dimen2}%
|
|
\@IEEEeqnarrayusemasterstruttrue% use master strut
|
|
\fi}
|
|
|
|
|
|
% allow user a way to see the struts
|
|
\newif\ifIEEEvisiblestruts
|
|
\IEEEvisiblestrutsfalse
|
|
|
|
% inserts an invisible strut using the master or local strut values
|
|
% uses scratch registers \skip0, \skip2, \dimen0, \dimen2
|
|
\def\@IEEEeqnarrayinsertstrut{\relax%
|
|
\if@IEEEeqnarrayusemasterstrut
|
|
% get master strut size
|
|
\expandafter\skip0=\@IEEEeqnarrayTHEmasterstrutheight\relax%
|
|
\expandafter\skip2=\@IEEEeqnarrayTHEmasterstrutdepth\relax%
|
|
\else%
|
|
% get local strut size
|
|
\expandafter\skip0=\@IEEEeqnarrayTHEstrutheight\relax%
|
|
\expandafter\skip2=\@IEEEeqnarrayTHEstrutdepth\relax%
|
|
\fi%
|
|
% remove stretchability, probably not needed
|
|
\dimen0\skip0\relax%
|
|
\dimen2\skip2\relax%
|
|
% dimen0 = height, dimen2 = depth
|
|
% allow user to see struts if desired
|
|
\ifIEEEvisiblestruts%
|
|
\vrule width0.2pt height\dimen0 depth\dimen2\relax%
|
|
\else%
|
|
\vrule width0pt height\dimen0 depth\dimen2\relax\fi}
|
|
|
|
|
|
% creates an invisible strut, useable even outside \IEEEeqnarray
|
|
% if \IEEEvisiblestrutstrue, the strut will be visible and 0.2pt wide.
|
|
% usage: \IEEEstrut[height][depth][font size commands]
|
|
% default is \IEEEstrut[0.7\normalbaselineskip][0.3\normalbaselineskip][\relax]
|
|
% blank arguments inherit the default values
|
|
% uses \dimen0, \dimen2, \skip0, \skip2
|
|
\def\IEEEstrut{\relax\@ifnextchar[{\@IEEEstrut}{\@IEEEstrut[0.7\normalbaselineskip]}}
|
|
\def\@IEEEstrut[#1]{\relax\@ifnextchar[{\@@IEEEstrut[#1]}{\@@IEEEstrut[#1][0.3\normalbaselineskip]}}
|
|
\def\@@IEEEstrut[#1][#2]{\relax\@ifnextchar[{\@@@IEEEstrut[#1][#2]}{\@@@IEEEstrut[#1][#2][\relax]}}
|
|
\def\@@@IEEEstrut[#1][#2][#3]{\mbox{#3\relax%
|
|
\def\@IEEEstrutARG{#1}%
|
|
\ifx\@IEEEstrutARG\@empty%
|
|
\skip0=0.7\normalbaselineskip\relax%
|
|
\else%
|
|
\skip0=#1\relax%
|
|
\fi%
|
|
\def\@IEEEstrutARG{#2}%
|
|
\ifx\@IEEEstrutARG\@empty%
|
|
\skip2=0.3\normalbaselineskip\relax%
|
|
\else%
|
|
\skip2=#2\relax%
|
|
\fi%
|
|
% remove stretchability, probably not needed
|
|
\dimen0\skip0\relax%
|
|
\dimen2\skip2\relax%
|
|
\ifIEEEvisiblestruts%
|
|
\vrule width0.2pt height\dimen0 depth\dimen2\relax%
|
|
\else%
|
|
\vrule width0.0pt height\dimen0 depth\dimen2\relax\fi}}
|
|
|
|
|
|
% enables strut mode by setting a default strut size and then zeroing the
|
|
% \baselineskip, \lineskip, \lineskiplimit and \jot
|
|
\def\IEEEeqnarraystrutmode{\IEEEeqnarraystrutsize{0.7\normalbaselineskip}{0.3\normalbaselineskip}[\relax]%
|
|
\baselineskip=0pt\lineskip=0pt\lineskiplimit=0pt\jot=0pt}
|
|
|
|
|
|
|
|
\def\IEEEeqnarray{\@IEEEeqnarraystarformfalse\@IEEEeqnarray}
|
|
\def\endIEEEeqnarray{\end@IEEEeqnarray}
|
|
|
|
\@namedef{IEEEeqnarray*}{\@IEEEeqnarraystarformtrue\@IEEEeqnarray}
|
|
\@namedef{endIEEEeqnarray*}{\end@IEEEeqnarray}
|
|
|
|
|
|
% \IEEEeqnarray is an enhanced \eqnarray.
|
|
% The star form defaults to not putting equation numbers at the end of each row.
|
|
% usage: \IEEEeqnarray[decl]{cols}
|
|
\def\@IEEEeqnarray{\relax\@ifnextchar[{\@@IEEEeqnarray}{\@@IEEEeqnarray[\relax]}}
|
|
\def\@@IEEEeqnarray[#1]#2{%
|
|
% default to showing the equation number or not based on whether or not
|
|
% the star form was involked
|
|
\if@IEEEeqnarraystarform\global\@eqnswfalse
|
|
\else% not the star form
|
|
\global\@eqnswtrue
|
|
\fi% if star form
|
|
\@IEEEissubequationfalse% default to no subequations
|
|
\@IEEElastlinewassubequationfalse% assume last line is not a sub equation
|
|
\@IEEEeqnarrayISinnerfalse% not yet within the lines of the halign
|
|
\@IEEEeqnarraystrutsize{0pt}{0pt}[\relax]% turn off struts by default
|
|
\@IEEEeqnarrayusemasterstruttrue% use master strut till user asks otherwise
|
|
\IEEEvisiblestrutsfalse% diagnostic mode defaults to off
|
|
% no extra space unless the user specifically requests it
|
|
\lineskip=0pt\relax
|
|
\lineskiplimit=0pt\relax
|
|
\baselineskip=\normalbaselineskip\relax%
|
|
\jot=\normaljot\relax%
|
|
\mathsurround\z@\relax% no extra spacing around math
|
|
\@advanceIEEEeqncolcnttrue% advance the col counter for each col the user uses,
|
|
% used in \IEEEeqnarraymulticol and in the preamble build
|
|
\stepcounter{equation}% advance equation counter before first line
|
|
\setcounter{IEEEsubequation}{0}% no subequation yet
|
|
\def\@currentlabel{\p@equation\theequation}% redefine the ref label
|
|
\IEEEeqnarraydecl\relax% allow a way for the user to make global overrides
|
|
#1\relax% allow user to override defaults
|
|
\let\\\@IEEEeqnarraycr% replace newline with one that can put in eqn. numbers
|
|
\global\@IEEEeqncolcnt\z@% col. count = 0 for first line
|
|
\@IEEEbuildpreamble #2\end\relax% build the preamble and put it into \@IEEEtrantmptoksA
|
|
% put in the column for the equation number
|
|
\ifnum\@IEEEeqnnumcols>0\relax\@IEEEappendtoksA{&}\fi% col separator for those after the first
|
|
\toks0={##}%
|
|
% advance the \@IEEEeqncolcnt for the isolation col, this helps with error checking
|
|
\@IEEEappendtoksA{\global\advance\@IEEEeqncolcnt by 1\relax}%
|
|
% add the isolation column
|
|
\@IEEEappendtoksA{\tabskip\z@skip\bgroup\the\toks0\egroup}%
|
|
% advance the \@IEEEeqncolcnt for the equation number col, this helps with error checking
|
|
\@IEEEappendtoksA{&\global\advance\@IEEEeqncolcnt by 1\relax}%
|
|
% add the equation number col to the preamble
|
|
\@IEEEappendtoksA{\tabskip\z@skip\hb@xt@\z@\bgroup\hss\the\toks0\egroup}%
|
|
% note \@IEEEeqnnumcols does not count the equation col or isolation col
|
|
% set the starting tabskip glue as determined by the preamble build
|
|
\tabskip=\@IEEEBPstartglue\relax
|
|
% begin the display alignment
|
|
\@IEEEeqnarrayISinnertrue% commands are now within the lines
|
|
$$\everycr{}\halign to\displaywidth\bgroup
|
|
% "exspand" the preamble
|
|
\span\the\@IEEEtrantmptoksA\cr}
|
|
|
|
% enter isolation/strut column (or the next column if the user did not use
|
|
% every column), record the strut status, complete the columns, do the strut if needed,
|
|
% restore counters to correct values and exit
|
|
\def\end@IEEEeqnarray{\@IEEEeqnarrayglobalizestrutstatus&\@@IEEEeqnarraycr\egroup%
|
|
\if@IEEElastlinewassubequation\global\advance\c@IEEEsubequation\m@ne\fi%
|
|
\global\advance\c@equation\m@ne%
|
|
$$\@ignoretrue}
|
|
|
|
% need a way to remember if last line is a subequation
|
|
\newif\if@IEEElastlinewassubequation%
|
|
\@IEEElastlinewassubequationfalse
|
|
|
|
% IEEEeqnarray uses a modifed \\ instead of the plain \cr to
|
|
% end rows. This allows for things like \\*[vskip amount]
|
|
% This "cr" macros are modified versions those for LaTeX2e's eqnarray
|
|
% the {\ifnum0=`} braces must be kept away from the last column to avoid
|
|
% altering spacing of its math, so we use & to advance to the next column
|
|
% as there is an isolation/strut column after the user's columns
|
|
\def\@IEEEeqnarraycr{\@IEEEeqnarrayglobalizestrutstatus&% save strut status and advance to next column
|
|
{\ifnum0=`}\fi
|
|
\@ifstar{%
|
|
\global\@eqpen\@M\@IEEEeqnarrayYCR
|
|
}{%
|
|
\global\@eqpen\interdisplaylinepenalty \@IEEEeqnarrayYCR
|
|
}%
|
|
}
|
|
|
|
\def\@IEEEeqnarrayYCR{\@testopt\@IEEEeqnarrayXCR\z@skip}
|
|
|
|
\def\@IEEEeqnarrayXCR[#1]{%
|
|
\ifnum0=`{\fi}%
|
|
\@@IEEEeqnarraycr
|
|
\noalign{\penalty\@eqpen\vskip\jot\vskip #1\relax}}%
|
|
|
|
\def\@@IEEEeqnarraycr{\@IEEEtrantmptoksA={}% clear token register
|
|
\advance\@IEEEeqncolcnt by -1\relax% adjust col count because of the isolation column
|
|
\ifnum\@IEEEeqncolcnt>\@IEEEeqnnumcols\relax
|
|
\@IEEEclspkgerror{Too many columns within the IEEEeqnarray\MessageBreak
|
|
environment}%
|
|
{Use fewer \string &'s or put more columns in the IEEEeqnarry column\MessageBreak
|
|
specifications.}\relax%
|
|
\else
|
|
\loop% add cols if the user did not use them all
|
|
\ifnum\@IEEEeqncolcnt<\@IEEEeqnnumcols\relax
|
|
\@IEEEappendtoksA{&}%
|
|
\advance\@IEEEeqncolcnt by 1\relax% update the col count
|
|
\repeat
|
|
% this number of &'s will take us the the isolation column
|
|
\fi
|
|
% execute the &'s
|
|
\the\@IEEEtrantmptoksA%
|
|
% handle the strut/isolation column
|
|
\@IEEEeqnarrayinsertstrut% do the strut if needed
|
|
\@IEEEeqnarraystrutreset% reset the strut system for next line or IEEEeqnarray
|
|
&% and enter the equation number column
|
|
% is this line needs an equation number, display it and advance the
|
|
% (sub)equation counters, record what type this line was
|
|
\if@eqnsw%
|
|
\if@IEEEissubequation\theIEEEsubequationdis\addtocounter{equation}{1}\stepcounter{IEEEsubequation}%
|
|
\global\@IEEElastlinewassubequationtrue%
|
|
\else% display a standard equation number, initialize the IEEEsubequation counter
|
|
\theequationdis\stepcounter{equation}\setcounter{IEEEsubequation}{0}%
|
|
\global\@IEEElastlinewassubequationfalse\fi%
|
|
\fi%
|
|
% reset the eqnsw flag to indicate default preference of the display of equation numbers
|
|
\if@IEEEeqnarraystarform\global\@eqnswfalse\else\global\@eqnswtrue\fi
|
|
\global\@IEEEissubequationfalse% reset the subequation flag
|
|
% reset the number of columns the user actually used
|
|
\global\@IEEEeqncolcnt\z@\relax
|
|
% the real end of the line
|
|
\cr}
|
|
|
|
|
|
|
|
|
|
|
|
% \IEEEeqnarraybox is like \IEEEeqnarray except the box form puts everything
|
|
% inside a vtop, vbox, or vcenter box depending on the letter in the second
|
|
% optional argument (t,b,c). Vbox is the default. Unlike \IEEEeqnarray,
|
|
% equation numbers are not displayed and \IEEEeqnarraybox can be nested.
|
|
% \IEEEeqnarrayboxm is for math mode (like \array) and does not put the vbox
|
|
% within an hbox.
|
|
% \IEEEeqnarrayboxt is for text mode (like \tabular) and puts the vbox within
|
|
% a \hbox{$ $} construct.
|
|
% \IEEEeqnarraybox will auto detect whether to use \IEEEeqnarrayboxm or
|
|
% \IEEEeqnarrayboxt depending on the math mode.
|
|
% The third optional argument specifies the width this box is to be set to -
|
|
% natural width is the default.
|
|
% The * forms do not add \jot line spacing
|
|
% usage: \IEEEeqnarraybox[decl][pos][width]{cols}
|
|
\def\IEEEeqnarrayboxm{\@IEEEeqnarraystarformfalse\@IEEEeqnarrayboxHBOXSWfalse\@IEEEeqnarraybox}
|
|
\def\endIEEEeqnarrayboxm{\end@IEEEeqnarraybox}
|
|
\@namedef{IEEEeqnarrayboxm*}{\@IEEEeqnarraystarformtrue\@IEEEeqnarrayboxHBOXSWfalse\@IEEEeqnarraybox}
|
|
\@namedef{endIEEEeqnarrayboxm*}{\end@IEEEeqnarraybox}
|
|
|
|
\def\IEEEeqnarrayboxt{\@IEEEeqnarraystarformfalse\@IEEEeqnarrayboxHBOXSWtrue\@IEEEeqnarraybox}
|
|
\def\endIEEEeqnarrayboxt{\end@IEEEeqnarraybox}
|
|
\@namedef{IEEEeqnarrayboxt*}{\@IEEEeqnarraystarformtrue\@IEEEeqnarrayboxHBOXSWtrue\@IEEEeqnarraybox}
|
|
\@namedef{endIEEEeqnarrayboxt*}{\end@IEEEeqnarraybox}
|
|
|
|
\def\IEEEeqnarraybox{\@IEEEeqnarraystarformfalse\ifmmode\@IEEEeqnarrayboxHBOXSWfalse\else\@IEEEeqnarrayboxHBOXSWtrue\fi%
|
|
\@IEEEeqnarraybox}
|
|
\def\endIEEEeqnarraybox{\end@IEEEeqnarraybox}
|
|
|
|
\@namedef{IEEEeqnarraybox*}{\@IEEEeqnarraystarformtrue\ifmmode\@IEEEeqnarrayboxHBOXSWfalse\else\@IEEEeqnarrayboxHBOXSWtrue\fi%
|
|
\@IEEEeqnarraybox}
|
|
\@namedef{endIEEEeqnarraybox*}{\end@IEEEeqnarraybox}
|
|
|
|
% flag to indicate if the \IEEEeqnarraybox needs to put things into an hbox{$ $}
|
|
% for \vcenter in non-math mode
|
|
\newif\if@IEEEeqnarrayboxHBOXSW%
|
|
\@IEEEeqnarrayboxHBOXSWfalse
|
|
|
|
\def\@IEEEeqnarraybox{\relax\@ifnextchar[{\@@IEEEeqnarraybox}{\@@IEEEeqnarraybox[\relax]}}
|
|
\def\@@IEEEeqnarraybox[#1]{\relax\@ifnextchar[{\@@@IEEEeqnarraybox[#1]}{\@@@IEEEeqnarraybox[#1][b]}}
|
|
\def\@@@IEEEeqnarraybox[#1][#2]{\relax\@ifnextchar[{\@@@@IEEEeqnarraybox[#1][#2]}{\@@@@IEEEeqnarraybox[#1][#2][\relax]}}
|
|
|
|
% #1 = decl; #2 = t,b,c; #3 = width, #4 = col specs
|
|
\def\@@@@IEEEeqnarraybox[#1][#2][#3]#4{\@IEEEeqnarrayISinnerfalse % not yet within the lines of the halign
|
|
\@IEEEeqnarraymasterstrutsave% save current master strut values
|
|
\@IEEEeqnarraystrutsize{0pt}{0pt}[\relax]% turn off struts by default
|
|
\@IEEEeqnarrayusemasterstruttrue% use master strut till user asks otherwise
|
|
\IEEEvisiblestrutsfalse% diagnostic mode defaults to off
|
|
% no extra space unless the user specifically requests it
|
|
\lineskip=0pt\relax%
|
|
\lineskiplimit=0pt\relax%
|
|
\baselineskip=\normalbaselineskip\relax%
|
|
\jot=\normaljot\relax%
|
|
\mathsurround\z@\relax% no extra spacing around math
|
|
% the default end glues are zero for an \IEEEeqnarraybox
|
|
\edef\@IEEEeqnarraycolSEPdefaultstart{\@IEEEeqnarraycolSEPzero}% default start glue
|
|
\edef\@IEEEeqnarraycolSEPdefaultend{\@IEEEeqnarraycolSEPzero}% default end glue
|
|
\edef\@IEEEeqnarraycolSEPdefaultmid{\@IEEEeqnarraycolSEPzero}% default inter-column glue
|
|
\@advanceIEEEeqncolcntfalse% do not advance the col counter for each col the user uses,
|
|
% used in \IEEEeqnarraymulticol and in the preamble build
|
|
\IEEEeqnarrayboxdecl\relax% allow a way for the user to make global overrides
|
|
#1\relax% allow user to override defaults
|
|
\let\\\@IEEEeqnarrayboxcr% replace newline with one that allows optional spacing
|
|
\@IEEEbuildpreamble #4\end\relax% build the preamble and put it into \@IEEEtrantmptoksA
|
|
% add an isolation column to the preamble to stop \\'s {} from getting into the last col
|
|
\ifnum\@IEEEeqnnumcols>0\relax\@IEEEappendtoksA{&}\fi% col separator for those after the first
|
|
\toks0={##}%
|
|
% add the isolation column to the preamble
|
|
\@IEEEappendtoksA{\tabskip\z@skip\bgroup\the\toks0\egroup}%
|
|
% set the starting tabskip glue as determined by the preamble build
|
|
\tabskip=\@IEEEBPstartglue\relax
|
|
% begin the alignment
|
|
\everycr{}%
|
|
% use only the very first token to determine the positioning
|
|
% this stops some problems when the user uses more than one letter,
|
|
% but is probably not worth the effort
|
|
% \noindent is used as a delimiter
|
|
\def\@IEEEgrabfirstoken##1##2\noindent{\let\@IEEEgrabbedfirstoken=##1}%
|
|
\@IEEEgrabfirstoken#2\relax\relax\noindent
|
|
% \@IEEEgrabbedfirstoken has the first token, the rest are discarded
|
|
% if we need to put things into and hbox and go into math mode, do so now
|
|
\if@IEEEeqnarrayboxHBOXSW \leavevmode \hbox \bgroup $\fi%
|
|
% use the appropriate vbox type
|
|
\if\@IEEEgrabbedfirstoken t\relax\vtop\else\if\@IEEEgrabbedfirstoken c\relax%
|
|
\vcenter\else\vbox\fi\fi\bgroup%
|
|
\@IEEEeqnarrayISinnertrue% commands are now within the lines
|
|
\ifx#3\relax\halign\else\halign to #3\relax\fi%
|
|
\bgroup
|
|
% "exspand" the preamble
|
|
\span\the\@IEEEtrantmptoksA\cr}
|
|
|
|
% carry strut status and enter the isolation/strut column,
|
|
% exit from math mode if needed, and exit
|
|
\def\end@IEEEeqnarraybox{\@IEEEeqnarrayglobalizestrutstatus% carry strut status
|
|
&% enter isolation/strut column
|
|
\@IEEEeqnarrayinsertstrut% do strut if needed
|
|
\@IEEEeqnarraymasterstrutrestore% restore the previous master strut values
|
|
% reset the strut system for next IEEEeqnarray
|
|
% (sets local strut values back to previous master strut values)
|
|
\@IEEEeqnarraystrutreset%
|
|
% ensure last line, exit from halign, close vbox
|
|
\crcr\egroup\egroup%
|
|
% exit from math mode and close hbox if needed
|
|
\if@IEEEeqnarrayboxHBOXSW $\egroup\fi}
|
|
|
|
|
|
|
|
% IEEEeqnarraybox uses a modifed \\ instead of the plain \cr to
|
|
% end rows. This allows for things like \\[vskip amount]
|
|
% This "cr" macros are modified versions those for LaTeX2e's eqnarray
|
|
% For IEEEeqnarraybox, \\* is the same as \\
|
|
% the {\ifnum0=`} braces must be kept away from the last column to avoid
|
|
% altering spacing of its math, so we use & to advance to the isolation/strut column
|
|
% carry strut status into isolation/strut column
|
|
\def\@IEEEeqnarrayboxcr{\@IEEEeqnarrayglobalizestrutstatus% carry strut status
|
|
&% enter isolation/strut column
|
|
\@IEEEeqnarrayinsertstrut% do strut if needed
|
|
% reset the strut system for next line or IEEEeqnarray
|
|
\@IEEEeqnarraystrutreset%
|
|
{\ifnum0=`}\fi%
|
|
\@ifstar{\@IEEEeqnarrayboxYCR}{\@IEEEeqnarrayboxYCR}}
|
|
|
|
% test and setup the optional argument to \\[]
|
|
\def\@IEEEeqnarrayboxYCR{\@testopt\@IEEEeqnarrayboxXCR\z@skip}
|
|
|
|
% IEEEeqnarraybox does not automatically increase line spacing by \jot
|
|
\def\@IEEEeqnarrayboxXCR[#1]{\ifnum0=`{\fi}%
|
|
\cr\noalign{\if@IEEEeqnarraystarform\else\vskip\jot\fi\vskip#1\relax}}
|
|
|
|
|
|
|
|
% starts the halign preamble build
|
|
\def\@IEEEbuildpreamble{\@IEEEtrantmptoksA={}% clear token register
|
|
\let\@IEEEBPcurtype=u%current column type is not yet known
|
|
\let\@IEEEBPprevtype=s%the previous column type was the start
|
|
\let\@IEEEBPnexttype=u%next column type is not yet known
|
|
% ensure these are valid
|
|
\def\@IEEEBPcurglue={0pt plus 0pt minus 0pt}%
|
|
\def\@IEEEBPcurcolname{@IEEEdefault}% name of current column definition
|
|
% currently acquired numerically referenced glue
|
|
% use a name that is easier to remember
|
|
\let\@IEEEBPcurnum=\@IEEEtrantmpcountA%
|
|
\@IEEEBPcurnum=0%
|
|
% tracks number of columns in the preamble
|
|
\@IEEEeqnnumcols=0%
|
|
% record the default end glues
|
|
\edef\@IEEEBPstartglue{\@IEEEeqnarraycolSEPdefaultstart}%
|
|
\edef\@IEEEBPendglue{\@IEEEeqnarraycolSEPdefaultend}%
|
|
% now parse the user's column specifications
|
|
\@@IEEEbuildpreamble}
|
|
|
|
|
|
% parses and builds the halign preamble
|
|
\def\@@IEEEbuildpreamble#1#2{\let\@@nextIEEEbuildpreamble=\@@IEEEbuildpreamble%
|
|
% use only the very first token to check the end
|
|
% \noindent is used as a delimiter as \end can be present here
|
|
\def\@IEEEgrabfirstoken##1##2\noindent{\let\@IEEEgrabbedfirstoken=##1}%
|
|
\@IEEEgrabfirstoken#1\relax\relax\noindent
|
|
\ifx\@IEEEgrabbedfirstoken\end\let\@@nextIEEEbuildpreamble=\@@IEEEfinishpreamble\else%
|
|
% identify current and next token type
|
|
\@IEEEgetcoltype{#1}{\@IEEEBPcurtype}{1}% current, error on invalid
|
|
\@IEEEgetcoltype{#2}{\@IEEEBPnexttype}{0}% next, no error on invalid next
|
|
% if curtype is a glue, get the glue def
|
|
\if\@IEEEBPcurtype g\@IEEEgetcurglue{#1}{\@IEEEBPcurglue}\fi%
|
|
% if curtype is a column, get the column def and set the current column name
|
|
\if\@IEEEBPcurtype c\@IEEEgetcurcol{#1}\fi%
|
|
% if curtype is a numeral, acquire the user defined glue
|
|
\if\@IEEEBPcurtype n\@IEEEprocessNcol{#1}\fi%
|
|
% process the acquired glue
|
|
\if\@IEEEBPcurtype g\@IEEEprocessGcol\fi%
|
|
% process the acquired col
|
|
\if\@IEEEBPcurtype c\@IEEEprocessCcol\fi%
|
|
% ready prevtype for next col spec.
|
|
\let\@IEEEBPprevtype=\@IEEEBPcurtype%
|
|
% be sure and put back the future token(s) as a group
|
|
\fi\@@nextIEEEbuildpreamble{#2}}
|
|
|
|
|
|
% executed just after preamble build is completed
|
|
% warn about zero cols, and if prevtype type = u, put in end tabskip glue
|
|
\def\@@IEEEfinishpreamble#1{\ifnum\@IEEEeqnnumcols<1\relax
|
|
\@IEEEclspkgerror{No column specifiers declared for IEEEeqnarray}%
|
|
{At least one column type must be declared for each IEEEeqnarray.}%
|
|
\fi%num cols less than 1
|
|
%if last type undefined, set default end tabskip glue
|
|
\if\@IEEEBPprevtype u\@IEEEappendtoksA{\tabskip=\@IEEEBPendglue}\fi}
|
|
|
|
|
|
% Identify and return the column specifier's type code
|
|
\def\@IEEEgetcoltype#1#2#3{%
|
|
% use only the very first token to determine the type
|
|
% \noindent is used as a delimiter as \end can be present here
|
|
\def\@IEEEgrabfirstoken##1##2\noindent{\let\@IEEEgrabbedfirstoken=##1}%
|
|
\@IEEEgrabfirstoken#1\relax\relax\noindent
|
|
% \@IEEEgrabfirstoken has the first token, the rest are discarded
|
|
% n = number
|
|
% g = glue (any other char in catagory 12)
|
|
% c = letter
|
|
% e = \end
|
|
% u = undefined
|
|
% third argument: 0 = no error message, 1 = error on invalid char
|
|
\let#2=u\relax% assume invalid until know otherwise
|
|
\ifx\@IEEEgrabbedfirstoken\end\let#2=e\else
|
|
\ifcat\@IEEEgrabbedfirstoken\relax\else% screen out control sequences
|
|
\if0\@IEEEgrabbedfirstoken\let#2=n\else
|
|
\if1\@IEEEgrabbedfirstoken\let#2=n\else
|
|
\if2\@IEEEgrabbedfirstoken\let#2=n\else
|
|
\if3\@IEEEgrabbedfirstoken\let#2=n\else
|
|
\if4\@IEEEgrabbedfirstoken\let#2=n\else
|
|
\if5\@IEEEgrabbedfirstoken\let#2=n\else
|
|
\if6\@IEEEgrabbedfirstoken\let#2=n\else
|
|
\if7\@IEEEgrabbedfirstoken\let#2=n\else
|
|
\if8\@IEEEgrabbedfirstoken\let#2=n\else
|
|
\if9\@IEEEgrabbedfirstoken\let#2=n\else
|
|
\ifcat,\@IEEEgrabbedfirstoken\let#2=g\relax
|
|
\else\ifcat a\@IEEEgrabbedfirstoken\let#2=c\relax\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
|
|
\if#2u\relax
|
|
\if0\noexpand#3\relax\else\@IEEEclspkgerror{Invalid character in column specifications}%
|
|
{Only letters, numerals and certain other symbols are allowed \MessageBreak
|
|
as IEEEeqnarray column specifiers.}\fi\fi}
|
|
|
|
|
|
% identify the current letter referenced column
|
|
% if invalid, use a default column
|
|
\def\@IEEEgetcurcol#1{\expandafter\ifx\csname @IEEEeqnarraycolDEF#1\endcsname\@IEEEeqnarraycolisdefined%
|
|
\def\@IEEEBPcurcolname{#1}\else% invalid column name
|
|
\@IEEEclspkgerror{Invalid column type "#1" in column specifications.\MessageBreak
|
|
Using a default centering column instead}%
|
|
{You must define IEEEeqnarray column types before use.}%
|
|
\def\@IEEEBPcurcolname{@IEEEdefault}\fi}
|
|
|
|
|
|
% identify and return the predefined (punctuation) glue value
|
|
\def\@IEEEgetcurglue#1#2{%
|
|
% ! = \! (neg small) -0.16667em (-3/18 em)
|
|
% , = \, (small) 0.16667em ( 3/18 em)
|
|
% : = \: (med) 0.22222em ( 4/18 em)
|
|
% ; = \; (large) 0.27778em ( 5/18 em)
|
|
% ' = \quad 1em
|
|
% " = \qquad 2em
|
|
% . = 0.5\arraycolsep
|
|
% / = \arraycolsep
|
|
% ? = 2\arraycolsep
|
|
% * = 1fil
|
|
% + = \@IEEEeqnarraycolSEPcenter
|
|
% - = \@IEEEeqnarraycolSEPzero
|
|
% Note that all em values are referenced to the math font (textfont2) fontdimen6
|
|
% value for 1em.
|
|
%
|
|
% use only the very first token to determine the type
|
|
% this prevents errant tokens from getting in the main text
|
|
% \noindent is used as a delimiter here
|
|
\def\@IEEEgrabfirstoken##1##2\noindent{\let\@IEEEgrabbedfirstoken=##1}%
|
|
\@IEEEgrabfirstoken#1\relax\relax\noindent
|
|
% get the math font 1em value
|
|
% LaTeX2e's NFSS2 does not preload the fonts, but \IEEEeqnarray needs
|
|
% to gain access to the math (\textfont2) font's spacing parameters.
|
|
% So we create a bogus box here that uses the math font to ensure
|
|
% that \textfont2 is loaded and ready. If this is not done,
|
|
% the \textfont2 stuff here may not work.
|
|
% Thanks to Bernd Raichle for his 1997 post on this topic.
|
|
{\setbox0=\hbox{$\displaystyle\relax$}}%
|
|
% fontdimen6 has the width of 1em (a quad).
|
|
\@IEEEtrantmpdimenA=\fontdimen6\textfont2\relax%
|
|
% identify the glue value based on the first token
|
|
% we discard anything after the first
|
|
\if!\@IEEEgrabbedfirstoken\@IEEEtrantmpdimenA=-0.16667\@IEEEtrantmpdimenA\edef#2{\the\@IEEEtrantmpdimenA}\else
|
|
\if,\@IEEEgrabbedfirstoken\@IEEEtrantmpdimenA=0.16667\@IEEEtrantmpdimenA\edef#2{\the\@IEEEtrantmpdimenA}\else
|
|
\if:\@IEEEgrabbedfirstoken\@IEEEtrantmpdimenA=0.22222\@IEEEtrantmpdimenA\edef#2{\the\@IEEEtrantmpdimenA}\else
|
|
\if;\@IEEEgrabbedfirstoken\@IEEEtrantmpdimenA=0.27778\@IEEEtrantmpdimenA\edef#2{\the\@IEEEtrantmpdimenA}\else
|
|
\if'\@IEEEgrabbedfirstoken\@IEEEtrantmpdimenA=1\@IEEEtrantmpdimenA\edef#2{\the\@IEEEtrantmpdimenA}\else
|
|
\if"\@IEEEgrabbedfirstoken\@IEEEtrantmpdimenA=2\@IEEEtrantmpdimenA\edef#2{\the\@IEEEtrantmpdimenA}\else
|
|
\if.\@IEEEgrabbedfirstoken\@IEEEtrantmpdimenA=0.5\arraycolsep\edef#2{\the\@IEEEtrantmpdimenA}\else
|
|
\if/\@IEEEgrabbedfirstoken\edef#2{\the\arraycolsep}\else
|
|
\if?\@IEEEgrabbedfirstoken\@IEEEtrantmpdimenA=2\arraycolsep\edef#2{\the\@IEEEtrantmpdimenA}\else
|
|
\if *\@IEEEgrabbedfirstoken\edef#2{0pt plus 1fil minus 0pt}\else
|
|
\if+\@IEEEgrabbedfirstoken\edef#2{\@IEEEeqnarraycolSEPcenter}\else
|
|
\if-\@IEEEgrabbedfirstoken\edef#2{\@IEEEeqnarraycolSEPzero}\else
|
|
\edef#2{\@IEEEeqnarraycolSEPzero}%
|
|
\@IEEEclspkgerror{Invalid predefined inter-column glue type "#1" in\MessageBreak
|
|
column specifications. Using a default value of\MessageBreak
|
|
0pt instead}%
|
|
{Only !,:;'"./?*+ and - are valid predefined glue types in the\MessageBreak
|
|
IEEEeqnarray column specifications.}\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
|
|
|
|
|
|
|
|
% process a numerical digit from the column specification
|
|
% and look up the corresponding user defined glue value
|
|
% can transform current type from n to g or a as the user defined glue is acquired
|
|
\def\@IEEEprocessNcol#1{\if\@IEEEBPprevtype g%
|
|
\@IEEEclspkgerror{Back-to-back inter-column glue specifiers in column\MessageBreak
|
|
specifications. Ignoring consecutive glue specifiers\MessageBreak
|
|
after the first}%
|
|
{You cannot have two or more glue types next to each other\MessageBreak
|
|
in the IEEEeqnarray column specifications.}%
|
|
\let\@IEEEBPcurtype=a% abort this glue, future digits will be discarded
|
|
\@IEEEBPcurnum=0\relax%
|
|
\else% if we previously aborted a glue
|
|
\if\@IEEEBPprevtype a\@IEEEBPcurnum=0\let\@IEEEBPcurtype=a%maintain digit abortion
|
|
\else%acquire this number
|
|
% save the previous type before the numerical digits started
|
|
\if\@IEEEBPprevtype n\else\let\@IEEEBPprevsavedtype=\@IEEEBPprevtype\fi%
|
|
\multiply\@IEEEBPcurnum by 10\relax%
|
|
\advance\@IEEEBPcurnum by #1\relax% add in number, \relax is needed to stop TeX's number scan
|
|
\if\@IEEEBPnexttype n\else%close acquisition
|
|
\expandafter\ifx\csname @IEEEeqnarraycolSEPDEF\expandafter\romannumeral\number\@IEEEBPcurnum\endcsname\@IEEEeqnarraycolisdefined%
|
|
\edef\@IEEEBPcurglue{\csname @IEEEeqnarraycolSEP\expandafter\romannumeral\number\@IEEEBPcurnum\endcsname}%
|
|
\else%user glue not defined
|
|
\@IEEEclspkgerror{Invalid user defined inter-column glue type "\number\@IEEEBPcurnum" in\MessageBreak
|
|
column specifications. Using a default value of\MessageBreak
|
|
0pt instead}%
|
|
{You must define all IEEEeqnarray numerical inter-column glue types via\MessageBreak
|
|
\string\IEEEeqnarraydefcolsep \space before they are used in column specifications.}%
|
|
\edef\@IEEEBPcurglue{\@IEEEeqnarraycolSEPzero}%
|
|
\fi% glue defined or not
|
|
\let\@IEEEBPcurtype=g% change the type to reflect the acquired glue
|
|
\let\@IEEEBPprevtype=\@IEEEBPprevsavedtype% restore the prev type before this number glue
|
|
\@IEEEBPcurnum=0\relax%ready for next acquisition
|
|
\fi%close acquisition, get glue
|
|
\fi%discard or acquire number
|
|
\fi%prevtype glue or not
|
|
}
|
|
|
|
|
|
% process an acquired glue
|
|
% add any acquired column/glue pair to the preamble
|
|
\def\@IEEEprocessGcol{\if\@IEEEBPprevtype a\let\@IEEEBPcurtype=a%maintain previous glue abortions
|
|
\else
|
|
% if this is the start glue, save it, but do nothing else
|
|
% as this is not used in the preamble, but before
|
|
\if\@IEEEBPprevtype s\edef\@IEEEBPstartglue{\@IEEEBPcurglue}%
|
|
\else%not the start glue
|
|
\if\@IEEEBPprevtype g%ignore if back to back glues
|
|
\@IEEEclspkgerror{Back-to-back inter-column glue specifiers in column\MessageBreak
|
|
specifications. Ignoring consecutive glue specifiers\MessageBreak
|
|
after the first}%
|
|
{You cannot have two or more glue types next to each other\MessageBreak
|
|
in the IEEEeqnarray column specifications.}%
|
|
\let\@IEEEBPcurtype=a% abort this glue
|
|
\else% not a back to back glue
|
|
\if\@IEEEBPprevtype c\relax% if the previoustype was a col, add column/glue pair to preamble
|
|
\ifnum\@IEEEeqnnumcols>0\relax\@IEEEappendtoksA{&}\fi
|
|
\toks0={##}%
|
|
% make preamble advance col counter if this environment needs this
|
|
\if@advanceIEEEeqncolcnt\@IEEEappendtoksA{\global\advance\@IEEEeqncolcnt by 1\relax}\fi
|
|
% insert the column defintion into the preamble, being careful not to expand
|
|
% the column definition
|
|
\@IEEEappendtoksA{\tabskip=\@IEEEBPcurglue}%
|
|
\@IEEEappendNOEXPANDtoksA{\begingroup\csname @IEEEeqnarraycolPRE}%
|
|
\@IEEEappendtoksA{\@IEEEBPcurcolname}%
|
|
\@IEEEappendNOEXPANDtoksA{\endcsname}%
|
|
\@IEEEappendtoksA{\the\toks0}%
|
|
\@IEEEappendNOEXPANDtoksA{\relax\relax\relax\relax\relax%
|
|
\relax\relax\relax\relax\relax\csname @IEEEeqnarraycolPOST}%
|
|
\@IEEEappendtoksA{\@IEEEBPcurcolname}%
|
|
\@IEEEappendNOEXPANDtoksA{\endcsname\relax\relax\relax\relax\relax%
|
|
\relax\relax\relax\relax\relax\endgroup}%
|
|
\advance\@IEEEeqnnumcols by 1\relax%one more column in the preamble
|
|
\else% error: non-start glue with no pending column
|
|
\@IEEEclspkgerror{Inter-column glue specifier without a prior column\MessageBreak
|
|
type in the column specifications. Ignoring this glue\MessageBreak
|
|
specifier}%
|
|
{Except for the first and last positions, glue can be placed only\MessageBreak
|
|
between column types.}%
|
|
\let\@IEEEBPcurtype=a% abort this glue
|
|
\fi% previous was a column
|
|
\fi% back-to-back glues
|
|
\fi% is start column glue
|
|
\fi% prev type not a
|
|
}
|
|
|
|
|
|
% process an acquired letter referenced column and, if necessary, add it to the preamble
|
|
\def\@IEEEprocessCcol{\if\@IEEEBPnexttype g\else
|
|
\if\@IEEEBPnexttype n\else
|
|
% we have a column followed by something other than a glue (or numeral glue)
|
|
% so we must add this column to the preamble now
|
|
\ifnum\@IEEEeqnnumcols>0\relax\@IEEEappendtoksA{&}\fi%col separator for those after the first
|
|
\if\@IEEEBPnexttype e\@IEEEappendtoksA{\tabskip=\@IEEEBPendglue\relax}\else%put in end glue
|
|
\@IEEEappendtoksA{\tabskip=\@IEEEeqnarraycolSEPdefaultmid\relax}\fi% or default mid glue
|
|
\toks0={##}%
|
|
% make preamble advance col counter if this environment needs this
|
|
\if@advanceIEEEeqncolcnt\@IEEEappendtoksA{\global\advance\@IEEEeqncolcnt by 1\relax}\fi
|
|
% insert the column definition into the preamble, being careful not to expand
|
|
% the column definition
|
|
\@IEEEappendNOEXPANDtoksA{\begingroup\csname @IEEEeqnarraycolPRE}%
|
|
\@IEEEappendtoksA{\@IEEEBPcurcolname}%
|
|
\@IEEEappendNOEXPANDtoksA{\endcsname}%
|
|
\@IEEEappendtoksA{\the\toks0}%
|
|
\@IEEEappendNOEXPANDtoksA{\relax\relax\relax\relax\relax%
|
|
\relax\relax\relax\relax\relax\csname @IEEEeqnarraycolPOST}%
|
|
\@IEEEappendtoksA{\@IEEEBPcurcolname}%
|
|
\@IEEEappendNOEXPANDtoksA{\endcsname\relax\relax\relax\relax\relax%
|
|
\relax\relax\relax\relax\relax\endgroup}%
|
|
\advance\@IEEEeqnnumcols by 1\relax%one more column in the preamble
|
|
\fi%next type not numeral
|
|
\fi%next type not glue
|
|
}
|
|
|
|
|
|
%%
|
|
%% END OF IEEEeqnarry DEFINITIONS
|
|
%%
|
|
|
|
|
|
|
|
|
|
% set up the running headings, this complex because of all the different
|
|
% modes IEEEtran supports
|
|
\if@twoside
|
|
\if@technote
|
|
\def\ps@headings{%
|
|
\def\@oddhead{\hbox{}\scriptsize\leftmark \hfil \thepage}
|
|
\def\@evenhead{\scriptsize\thepage \hfil \leftmark\hbox{}}
|
|
\if@draftclsmode
|
|
\if@draftclsmodefoot
|
|
\def\@oddfoot{\scriptsize\@date\hfil DRAFT}
|
|
\def\@evenfoot{\scriptsize DRAFT\hfil\@date}
|
|
\else
|
|
\def\@oddfoot{}\def\@evenfoot{}%
|
|
\fi
|
|
\else
|
|
\def\@oddfoot{}\def\@evenfoot{}
|
|
\fi}
|
|
\else % not a technote
|
|
\def\ps@headings{%
|
|
\if@confmode
|
|
\def\@oddhead{}
|
|
\def\@evenhead{}
|
|
\else
|
|
\def\@oddhead{\hbox{}\scriptsize\rightmark \hfil \thepage}
|
|
\def\@evenhead{\scriptsize\thepage \hfil \leftmark\hbox{}}
|
|
\fi
|
|
\if@draftclsmode
|
|
\def\@oddhead{\hbox{}\scriptsize\rightmark \hfil \thepage}
|
|
\def\@evenhead{\scriptsize\thepage \hfil \leftmark\hbox{}}
|
|
\if@draftclsmodefoot
|
|
\def\@oddfoot{\scriptsize\@date\hfil DRAFT}
|
|
\def\@evenfoot{\scriptsize DRAFT\hfil\@date}
|
|
\else
|
|
\def\@oddfoot{}\def\@evenfoot{}%
|
|
\fi
|
|
\else
|
|
\def\@oddfoot{}\def\@evenfoot{}%
|
|
\fi}
|
|
\fi
|
|
\else % single side
|
|
\def\ps@headings{%
|
|
\if@confmode
|
|
\def\@oddhead{}
|
|
\def\@evenhead{}
|
|
\else
|
|
\def\@oddhead{\hbox{}\scriptsize\leftmark \hfil \thepage}
|
|
\def\@evenhead{}
|
|
\fi
|
|
\if@draftclsmode
|
|
\def\@oddhead{\hbox{}\scriptsize\leftmark \hfil \thepage}
|
|
\def\@evenhead{}
|
|
\if@draftclsmodefoot
|
|
\def\@oddfoot{\scriptsize \@date \hfil DRAFT}
|
|
\else
|
|
\def\@oddfoot{}
|
|
\fi
|
|
\else
|
|
\def\@oddfoot{}
|
|
\fi
|
|
\def\@evenfoot{}}
|
|
\fi
|
|
|
|
|
|
% title page style
|
|
\def\ps@titlepagestyle{\def\@oddfoot{}\def\@evenfoot{}%
|
|
\if@confmode
|
|
\def\@oddhead{}%
|
|
\def\@evenhead{}%
|
|
\else
|
|
\def\@oddhead{\hbox{}\scriptsize\leftmark \hfil \thepage}%
|
|
\def\@evenhead{\scriptsize\thepage \hfil \leftmark\hbox{}}%
|
|
\fi
|
|
\if@draftclsmode
|
|
\def\@oddhead{\hbox{}\scriptsize\leftmark \hfil \thepage}%
|
|
\def\@evenhead{\scriptsize\thepage \hfil \leftmark\hbox{}}%
|
|
\if@draftclsmodefoot
|
|
\def\@oddfoot{\scriptsize \@date\hfil DRAFT}%
|
|
\def\@evenfoot{\scriptsize DRAFT\hfil \@date}%
|
|
\fi
|
|
\else
|
|
% all non-draft mode footers
|
|
\if@IEEEusingpubid
|
|
% for title pages that are using a pubid
|
|
% do not repeat pubid if using peer review option
|
|
\if@peerreviewoption
|
|
\else
|
|
\footskip 0pt%
|
|
\def\@oddfoot{\hss\normalfont\footnotesize\raisebox{1.5ex}[1.5ex]{\@pubid}\hss}%
|
|
\def\@evenfoot{\hss\normalfont\footnotesize\raisebox{1.5ex}[1.5ex]{\@pubid}\hss}%
|
|
\fi
|
|
\fi
|
|
\fi}
|
|
|
|
|
|
% peer review cover page style
|
|
\def\ps@peerreviewcoverpagestyle{%
|
|
\def\@oddhead{}\def\@evenhead{}%
|
|
\def\@oddfoot{}\def\@evenfoot{}%
|
|
\if@draftclsmode
|
|
\if@draftclsmodefoot
|
|
\def\@oddfoot{\scriptsize \@date\hfil DRAFT}%
|
|
\def\@evenfoot{\scriptsize DRAFT\hfil \@date}%
|
|
\fi
|
|
\else
|
|
% non-draft mode footers
|
|
\if@IEEEusingpubid
|
|
\footskip 0pt%
|
|
\def\@oddfoot{\hss\normalfont\footnotesize\raisebox{1.5ex}[1.5ex]{\@pubid}\hss}%
|
|
\def\@evenfoot{\hss\normalfont\footnotesize\raisebox{1.5ex}[1.5ex]{\@pubid}\hss}%
|
|
\fi
|
|
\fi}
|
|
|
|
|
|
% start with empty headings
|
|
\def\rightmark{}\def\leftmark{}
|
|
|
|
|
|
%% Defines the command for putting the header. \footernote{TEXT} is the same
|
|
%% as \markboth{TEXT}{TEXT}.
|
|
%% Note that all the text is forced into uppercase, if you have some text
|
|
%% that needs to be in lower case, for instance et. al., then either manually
|
|
%% set \leftmark and \rightmark or use \MakeLowercase{et. al.} within the
|
|
%% arguments to \markboth.
|
|
\def\markboth#1#2{\def\leftmark{\MakeUppercase{#1}}\def\rightmark{\MakeUppercase{#2}}}
|
|
\def\footernote#1{\markboth{#1}{#1}}
|
|
|
|
\def\today{\ifcase\month\or
|
|
January\or February\or March\or April\or May\or June\or
|
|
July\or August\or September\or October\or November\or December\fi
|
|
\space\number\day, \number\year}
|
|
|
|
|
|
|
|
|
|
%% CITATION AND BIBLIOGRAPHY COMMANDS
|
|
%%
|
|
%% V1.6 no longer supports the older, nonstandard \shortcite and \citename setup stuff
|
|
%
|
|
%
|
|
% Modify Latex2e \@citex to separate citations with "], ["
|
|
\def\@citex[#1]#2{%
|
|
\let\@citea\@empty
|
|
\@cite{\@for\@citeb:=#2\do
|
|
{\@citea\def\@citea{], [}%
|
|
\edef\@citeb{\expandafter\@firstofone\@citeb\@empty}%
|
|
\if@filesw\immediate\write\@auxout{\string\citation{\@citeb}}\fi
|
|
\@ifundefined{b@\@citeb}{\mbox{\reset@font\bfseries ?}%
|
|
\G@refundefinedtrue
|
|
\@latex@warning
|
|
{Citation `\@citeb' on page \thepage \space undefined}}%
|
|
{\hbox{\csname b@\@citeb\endcsname}}}}{#1}}
|
|
|
|
% V1.6 we create hooks for the optional use of Donald Arseneau's
|
|
% cite.sty package. cite.sty is "smart" and will notice that the
|
|
% following format controls are already defined and will not
|
|
% redefine them. The result will be the proper sorting of the
|
|
% citation numbers and auto detection of 3 or more entry "ranges" -
|
|
% all in IEEE style: [1], [2], [5]--[7], [12]
|
|
% This also allows for an optional note, i.e., \cite[mynote]{..}.
|
|
% If the \cite with note has more than one reference, the note will
|
|
% be applied to the last of the listed references. It is generally
|
|
% desired that if a note is given, only one reference is listed in
|
|
% that \cite.
|
|
% Thanks to Mr. Arseneau for providing the required format arguments
|
|
% to produce the IEEE style.
|
|
\def\citepunct{], [}
|
|
\def\citedash{]--[}
|
|
|
|
|
|
% V1.6b providing this command makes hyperref think the natbib package is
|
|
% in use so that it will not interfere with cite.sty. However, as a result,
|
|
% citation numbers will not be hyperlinked.
|
|
\def\NAT@parse{\typeout{IEEEtran error: Attempt to use fake Natbib command
|
|
which is provided to fool Hyperref.}}
|
|
% it easy enough to override via:
|
|
% \let\NAT@parse\undefined
|
|
|
|
|
|
% V1.6 class files should always provide these
|
|
\def\newblock{\hskip .11em\@plus.33em\@minus.07em}
|
|
\let\@openbib@code\@empty
|
|
|
|
|
|
|
|
% Provide support for the control entries of IEEEtran.bst V1.00 and later.
|
|
\def\bstctlcite#1{\@bsphack
|
|
\@for\@citeb:=#1\do{%
|
|
\edef\@citeb{\expandafter\@firstofone\@citeb}%
|
|
\if@filesw\immediate\write\@auxout{\string\citation{\@citeb}}\fi}%
|
|
\@esphack}
|
|
|
|
% V1.6 provide a way for a user to execute a command just before
|
|
% a given reference number - used to insert a \newpage to balance
|
|
% the columns on the last page
|
|
\edef\@IEEEtriggerrefnum{0} % the default of zero means that
|
|
% the command is not executed
|
|
\def\@IEEEtriggercmd{\newpage}
|
|
|
|
% allow the user to alter the triggered command
|
|
\long\def\IEEEtriggercmd#1{\long\def\@IEEEtriggercmd{#1}}
|
|
|
|
% allow user a way to specify the reference number just before the
|
|
% command is executed
|
|
\def\IEEEtriggeratref#1{\@IEEEtrantmpcountA=#1%
|
|
\edef\@IEEEtriggerrefnum{\the\@IEEEtrantmpcountA}}%
|
|
|
|
% trigger command at the given reference
|
|
\def\@IEEEbibitemprefix{\@IEEEtrantmpcountA=\@IEEEtriggerrefnum\relax%
|
|
\advance\@IEEEtrantmpcountA by -1\relax%
|
|
\ifnum\c@enumiv=\@IEEEtrantmpcountA\relax\@IEEEtriggercmd\relax\fi}
|
|
|
|
\def\@biblabel#1{[#1]}
|
|
|
|
\def\thebibliography#1{\section*{References}%
|
|
\addcontentsline{toc}{section}{References}%
|
|
% V1.6 add some rubber space here and provide a command trigger
|
|
\footnotesize \vskip 0.3\baselineskip plus 0.1\baselineskip minus 0.1\baselineskip%
|
|
\list{\@biblabel{\@arabic\c@enumiv}}%
|
|
{\settowidth\labelwidth{\@biblabel{#1}}%
|
|
\leftmargin\labelwidth
|
|
\advance\leftmargin\labelsep\relax
|
|
\itemsep 0pt plus .5pt\relax%
|
|
\usecounter{enumiv}%
|
|
\let\p@enumiv\@empty
|
|
\renewcommand\theenumiv{\@arabic\c@enumiv}}%
|
|
\let\@IEEElatexbibitem\bibitem%
|
|
\def\bibitem{\@IEEEbibitemprefix\@IEEElatexbibitem}%
|
|
\def\newblock{\hskip .11em plus .33em minus .07em}%
|
|
% originally:
|
|
% \sloppy\clubpenalty4000\widowpenalty4000%
|
|
% by adding the \interlinepenalty here, we make it more
|
|
% difficult, but not impossible, for LaTeX to break within a reference.
|
|
% IEEE almost never breaks a reference (but they do it more often with
|
|
% technotes). You may get an underfull vbox warning around the bibliography,
|
|
% but the final result will be much more like what IEEE will publish.
|
|
% MDS 11/2000
|
|
\if@technote\sloppy\clubpenalty4000\widowpenalty4000\interlinepenalty100%
|
|
\else\sloppy\clubpenalty4000\widowpenalty4000\interlinepenalty500\fi%
|
|
\sfcode`\.=1000\relax}
|
|
\let\endthebibliography=\endlist
|
|
|
|
|
|
|
|
|
|
% TITLE PAGE COMMANDS
|
|
%
|
|
%
|
|
% \IEEEmembership is used to produce the sublargesize italic font used to indicate author
|
|
% IEEE membership.
|
|
\def\IEEEmembership#1{{\sublargesize\normalfont\textit{#1}}}
|
|
|
|
|
|
% \authorrefmark{} produces a footnote type symbol to indicate author affiliation.
|
|
% When given an argument of 1 to 9, \authorrefmark{} follows the standard LaTeX footnote
|
|
% symbol sequence convention. However, for arguments 10 and above, \authorrefmark{}
|
|
% reverts to using lower case roman numerals, so it cannot overflow. Do note that you
|
|
% cannot use \footnotemark[] in place of \authorrefmark{} within \author as the footnote
|
|
% symbols will have been turned off to prevent \thanks from creating footnote marks.
|
|
% \authorrefmark{} produces a symbol that appears to LaTeX as having zero vertical
|
|
% height - this allows for a more compact line packing, but the user must ensure that
|
|
% the interline spacing is large enough to prevent \authorrefmark{} from colliding
|
|
% with the text above.
|
|
\def\authorrefmark#1{\raisebox{0pt}[0pt][0pt]{\textsuperscript{\footnotesize\ensuremath{\ifcase#1\or *\or \dagger\or \ddagger\or%
|
|
\mathsection\or \mathparagraph\or \|\or **\or \dagger\dagger%
|
|
\or \ddagger\ddagger \else\textsuperscript{\expandafter\romannumeral#1}\fi}}}}
|
|
|
|
|
|
% FONT CONTROLS AND SPACINGS FOR CONFERENCE MODE AUTHOR NAME AND AFFILIATION BLOCKS
|
|
%
|
|
% The default font styles for the author name and affiliation blocks (confmode)
|
|
\def\@IEEEauthorblockNstyle{\normalfont\sublargesize}
|
|
\def\@IEEEauthorblockAstyle{\normalfont\normalsize}
|
|
% The default if the user does not use an author block
|
|
\def\@IEEEauthordefaulttextstyle{\normalfont\sublargesize}
|
|
|
|
% spacing from title (or special paper notice) to author name blocks (confmode)
|
|
% can be negative
|
|
\def\@IEEEauthorblockconfadjspace{-0.25em}
|
|
|
|
% spacing between name and affiliation blocks (confmode)
|
|
% This can be negative.
|
|
% IEEE doesn't want any added spacing here, but I will leave these
|
|
% controls in place in case they ever change their mind.
|
|
% Personally, I like 0.75ex.
|
|
%\def\@IEEEauthorblockNtopspace{0.75ex}
|
|
%\def\@IEEEauthorblockAtopspace{0.75ex}
|
|
\def\@IEEEauthorblockNtopspace{0.0ex}
|
|
\def\@IEEEauthorblockAtopspace{0.0ex}
|
|
% baseline spacing within name and affiliation blocks (confmode)
|
|
% must be positive, spacings below certain values will make
|
|
% the position of line of text sensitive to the contents of the
|
|
% line above it i.e., whether or not the prior line has descenders,
|
|
% subscripts, etc. For this reason it is a good idea to keep
|
|
% these above 2.6ex
|
|
\def\@IEEEauthorblockNinterlinespace{2.6ex}
|
|
\def\@IEEEauthorblockAinterlinespace{2.75ex}
|
|
|
|
% This tracks the required strut size.
|
|
% See the \@IEEEauthorhalign command for the actual default value used.
|
|
\def\@IEEEauthorblockXinterlinespace{2.7ex}
|
|
|
|
% variables to retain font size and style across groups
|
|
% values given here have no effect as they will be overwritten later
|
|
\gdef\@IEEESAVESTATEfontsize{10}
|
|
\gdef\@IEEESAVESTATEfontbaselineskip{12}
|
|
\gdef\@IEEESAVESTATEfontencoding{OT1}
|
|
\gdef\@IEEESAVESTATEfontfamily{ptm}
|
|
\gdef\@IEEESAVESTATEfontseries{m}
|
|
\gdef\@IEEESAVESTATEfontshape{n}
|
|
|
|
% saves the current font attributes
|
|
\def\@IEEEcurfontSAVE{\global\let\@IEEESAVESTATEfontsize\f@size%
|
|
\global\let\@IEEESAVESTATEfontbaselineskip\f@baselineskip%
|
|
\global\let\@IEEESAVESTATEfontencoding\f@encoding%
|
|
\global\let\@IEEESAVESTATEfontfamily\f@family%
|
|
\global\let\@IEEESAVESTATEfontseries\f@series%
|
|
\global\let\@IEEESAVESTATEfontshape\f@shape}
|
|
|
|
% restores the saved font attributes
|
|
\def\@IEEEcurfontRESTORE{\fontsize{\@IEEESAVESTATEfontsize}{\@IEEESAVESTATEfontbaselineskip}%
|
|
\fontencoding{\@IEEESAVESTATEfontencoding}%
|
|
\fontfamily{\@IEEESAVESTATEfontfamily}%
|
|
\fontseries{\@IEEESAVESTATEfontseries}%
|
|
\fontshape{\@IEEESAVESTATEfontshape}%
|
|
\selectfont}
|
|
|
|
|
|
% variable to indicate if the current block is the first block in the column
|
|
\newif\if@IEEEprevauthorblockincol \@IEEEprevauthorblockincolfalse
|
|
|
|
|
|
% the command places a strut with height and depth = \@IEEEauthorblockXinterlinespace
|
|
% we use this technique to have complete manual control over the spacing of the lines
|
|
% within the halign environment.
|
|
% We set the below baseline portion at 30%, the above
|
|
% baseline portion at 70% of the total length.
|
|
% Responds to changes in the document's \baselinestretch
|
|
\def\@IEEEauthorstrutrule{\@IEEEtrantmpdimenA\@IEEEauthorblockXinterlinespace%
|
|
\@IEEEtrantmpdimenA=\baselinestretch\@IEEEtrantmpdimenA%
|
|
\rule[-0.3\@IEEEtrantmpdimenA]{0pt}{\@IEEEtrantmpdimenA}}
|
|
|
|
|
|
% blocks to hold the authors' names and affilations.
|
|
% Makes formatting easy for conferences
|
|
%
|
|
% use real definitions in conference mode
|
|
% name block
|
|
\def\authorblockN#1{\relax\@IEEEauthorblockNstyle% set the default text style
|
|
\gdef\@IEEEauthorblockXinterlinespace{0pt}% disable strut for spacer row
|
|
% the \expandafter hides the \cr in conditional tex, see the array.sty docs
|
|
% for details, probably not needed here as the \cr is in a macro
|
|
% do a spacer row if needed
|
|
\if@IEEEprevauthorblockincol\expandafter\@IEEEauthorblockNtopspaceline\fi
|
|
\global\@IEEEprevauthorblockincoltrue% we now have a block in this column
|
|
%restore the correct strut value
|
|
\gdef\@IEEEauthorblockXinterlinespace{\@IEEEauthorblockNinterlinespace}%
|
|
% input the author names
|
|
#1%
|
|
% end the row if the user did not already
|
|
\crcr}
|
|
% spacer row for names
|
|
\def\@IEEEauthorblockNtopspaceline{\cr\noalign{\vskip\@IEEEauthorblockNtopspace}}
|
|
%
|
|
% affiliation block
|
|
\def\authorblockA#1{\relax\@IEEEauthorblockAstyle% set the default text style
|
|
\gdef\@IEEEauthorblockXinterlinespace{0pt}%disable strut for spacer row
|
|
% the \expandafter hides the \cr in conditional tex, see the array.sty docs
|
|
% for details, probably not needed here as the \cr is in a macro
|
|
% do a spacer row if needed
|
|
\if@IEEEprevauthorblockincol\expandafter\@IEEEauthorblockAtopspaceline\fi
|
|
\global\@IEEEprevauthorblockincoltrue% we now have a block in this column
|
|
%restore the correct strut value
|
|
\gdef\@IEEEauthorblockXinterlinespace{\@IEEEauthorblockAinterlinespace}%
|
|
% input the author affiliations
|
|
#1%
|
|
% end the row if the user did not already
|
|
\crcr}
|
|
% spacer row for affiliations
|
|
\def\@IEEEauthorblockAtopspaceline{\cr\noalign{\vskip\@IEEEauthorblockAtopspace}}
|
|
|
|
|
|
% allow papers to compile even if author blocks are used in modes other
|
|
% than conference or peerreviewca. For such cases, we provide dummy blocks.
|
|
\if@confmode
|
|
\else
|
|
\if@peerreviewcaoption\else
|
|
% not conference or peerreviewca mode
|
|
\def\authorblockN#1{#1}%
|
|
\def\authorblockA#1{#1}%
|
|
\fi
|
|
\fi
|
|
|
|
|
|
|
|
% we provide our own halign so as not to have to depend on tabular
|
|
\def\@IEEEauthorhalign{\@IEEEauthordefaulttextstyle% default text style
|
|
\lineskip=0pt\relax% disable line spacing
|
|
\lineskiplimit=0pt\relax%
|
|
\baselineskip=0pt\relax%
|
|
\@IEEEcurfontSAVE% save the current font
|
|
\mathsurround\z@\relax% no extra spacing around math
|
|
\let\\\@IEEEauthorhaligncr% replace newline with halign friendly one
|
|
\tabskip=0pt\relax% no column spacing
|
|
\everycr{}% ensure no problems here
|
|
\@IEEEprevauthorblockincolfalse% no author blocks yet
|
|
\def\@IEEEauthorblockXinterlinespace{2.7ex}% default interline space
|
|
\vtop\bgroup%vtop box
|
|
\halign\bgroup&\relax\hfil\@IEEEcurfontRESTORE\relax ##\relax
|
|
\hfil\@IEEEcurfontSAVE\@IEEEauthorstrutrule\cr}
|
|
|
|
% ensure last line, exit from halign, close vbox
|
|
\def\end@IEEEauthorhalign{\crcr\egroup\egroup}
|
|
|
|
% handle bogus star form
|
|
\def\@IEEEauthorhaligncr{{\ifnum0=`}\fi\@ifstar{\@@IEEEauthorhaligncr}{\@@IEEEauthorhaligncr}}
|
|
|
|
% test and setup the optional argument to \\[]
|
|
\def\@@IEEEauthorhaligncr{\@testopt\@@@IEEEauthorhaligncr\z@skip}
|
|
|
|
% end the line and do the optional spacer
|
|
\def\@@@IEEEauthorhaligncr[#1]{\ifnum0=`{\fi}\cr\noalign{\vskip#1\relax}}
|
|
|
|
|
|
|
|
% flag to prevent multiple \and warning messages
|
|
\newif\if@IEEEWARNand
|
|
\@IEEEWARNandtrue
|
|
|
|
% if in conference or peerreviewca modes, we support the use of \and as \author is a
|
|
% tabular environment, otherwise we warn the user that \and is invalid
|
|
% outside of conference or peerreviewca modes.
|
|
\def\and{\relax} % provide a bogus \and that we will then override
|
|
|
|
\renewcommand{\and}[1][\relax]{\if@IEEEWARNand\typeout{** WARNING: \noexpand\and is valid only
|
|
when in conference or peerreviewca}\typeout{modes (line \the\inputlineno).}\fi\global\@IEEEWARNandfalse}
|
|
|
|
\if@confmode%
|
|
\renewcommand{\and}[1][\hfill]{\end{@IEEEauthorhalign}#1\begin{@IEEEauthorhalign}}%
|
|
\fi
|
|
\if@peerreviewcaoption
|
|
\renewcommand{\and}[1][\hfill]{\end{@IEEEauthorhalign}#1\begin{@IEEEauthorhalign}}%
|
|
\fi
|
|
|
|
|
|
% page clearing command
|
|
% based on LaTeX2e's \cleardoublepage, but allows different page styles
|
|
% for the inserted blank pages
|
|
\def\@IEEEcleardoublepage#1{\clearpage\if@twoside\ifodd\c@page\else
|
|
\hbox{}\thispagestyle{#1}\newpage\if@twocolumn\hbox{}\thispagestyle{#1}\newpage\fi\fi\fi}
|
|
|
|
|
|
% user command to invoke the title page
|
|
\def\maketitle{\par%
|
|
\begingroup%
|
|
\normalfont%
|
|
\def\thefootnote{}% the \thanks{} mark type is empty
|
|
\def\footnotemark{}% and kill space from \thanks within author
|
|
\footnotesize% equal spacing between thanks lines
|
|
\footnotesep 0.7\baselineskip%see global setting of \footnotesep for more info
|
|
\normalsize%
|
|
\if@peerreviewoption
|
|
\newpage\global\@topnum\z@ \@maketitle\@IEEEstatictitlevskip\@IEEEaftertitletext%
|
|
\thispagestyle{peerreviewcoverpagestyle}\@thanks%
|
|
\else
|
|
\if@twocolumn%
|
|
\if@technote%
|
|
\newpage\global\@topnum\z@ \@maketitle\@IEEEstatictitlevskip\@IEEEaftertitletext%
|
|
\else
|
|
\twocolumn[\@maketitle\@IEEEdynamictitlevspace\@IEEEaftertitletext]%
|
|
\fi
|
|
\else
|
|
\newpage\global\@topnum\z@ \@maketitle\@IEEEstatictitlevskip\@IEEEaftertitletext%
|
|
\fi
|
|
\thispagestyle{titlepagestyle}\@thanks%
|
|
\fi
|
|
% pullup page for pubid if used.
|
|
\if@IEEEusingpubid
|
|
\enlargethispage{-\@pubidpullup}%
|
|
\fi
|
|
\endgroup
|
|
\setcounter{footnote}{0}\let\maketitle\relax\let\@maketitle\relax
|
|
\gdef\@thanks{}
|
|
% v1.6b do not clear these as we will need the title again for peer review papers
|
|
% \gdef\@author{}\gdef\@title{}%
|
|
\let\thanks\relax}
|
|
|
|
|
|
% formats the Title, authors names, affiliations and special paper notice
|
|
% THIS IS A CONTROLLED SPACING COMMAND! Do not allow blank lines or unintentional
|
|
% spaces to enter the definition - use % at the end of each line
|
|
% Changed Title font to \LARGE from \Huge
|
|
\def\@maketitle{\newpage
|
|
\begin{center}%
|
|
\if@technote%
|
|
{\bfseries\large\@title\par}\vskip 1.3em{\lineskip .5em\@author\@specialpapernotice\par}%
|
|
\else% not a technote
|
|
\vskip0.25in{\LARGE\@title\par}\vskip1.0em\par%
|
|
% V1.6 handle \author differently if in conference mode
|
|
\if@confmode%
|
|
{\@specialpapernotice\mbox{}\vskip\@IEEEauthorblockconfadjspace%
|
|
\mbox{}\hfill\begin{@IEEEauthorhalign}\@author\end{@IEEEauthorhalign}\hfill\mbox{}\par}%
|
|
\else% peerreviewca, peerreview or journal
|
|
\if@peerreviewcaoption
|
|
% peerreviewca handles author names just like conference mode
|
|
{\@specialpapernotice\mbox{}\vskip\@IEEEauthorblockconfadjspace%
|
|
\mbox{}\hfill\begin{@IEEEauthorhalign}\@author\end{@IEEEauthorhalign}\hfill\mbox{}\par}%
|
|
\else % journal or peerreview
|
|
{\lineskip.5em\sublargesize\@author\@specialpapernotice\par}%
|
|
\fi
|
|
\fi
|
|
\fi\end{center}}
|
|
|
|
|
|
|
|
% V1.6b define the \IEEEpeerreviewmaketitle as needed
|
|
\if@peerreviewoption
|
|
\def\IEEEpeerreviewmaketitle{\@IEEEcleardoublepage{empty}%
|
|
\if@twocolumnmode
|
|
\twocolumn[\@IEEEpeerreviewmaketitle\@IEEEdynamictitlevspace]
|
|
\else
|
|
\newpage\@IEEEpeerreviewmaketitle\@IEEEstatictitlevskip
|
|
\fi
|
|
\thispagestyle{titlepagestyle}}
|
|
\else
|
|
% \IEEEpeerreviewmaketitle does nothing if peer review option has not been selected
|
|
\def\IEEEpeerreviewmaketitle{\relax}
|
|
\fi
|
|
|
|
% peerreview formats the repeated title like the title in journal papers.
|
|
\def\@IEEEpeerreviewmaketitle{\begin{center}%
|
|
\normalfont\normalsize\vskip0.2em{\Huge\@title\par}\vskip1.0em\par
|
|
\end{center}}
|
|
|
|
|
|
|
|
% V1.6
|
|
% this is a static rubber spacer between the title/authors and the main text
|
|
% used for single column text, or when the title appears in the first column
|
|
% of two column text (technotes).
|
|
\def\@IEEEstatictitlevskip{{\normalfont\normalsize
|
|
% adjust spacing to next text
|
|
% v1.6b handle peer review papers
|
|
\if@peerreviewoption
|
|
% for peer review papers, the same value is used for both title pages
|
|
% regardless of the other paper modes
|
|
\vskip 1\baselineskip plus 0.375\baselineskip minus 0.1875\baselineskip
|
|
\else
|
|
\if@confmode% conference
|
|
\vskip 1\baselineskip plus 0.375\baselineskip minus 0.1875\baselineskip%
|
|
\else%
|
|
\if@technote% technote
|
|
\vskip 1\baselineskip plus 0.375\baselineskip minus 0.1875\baselineskip%
|
|
\else% journal uses more space
|
|
\vskip 2.5\baselineskip plus 0.75\baselineskip minus 0.375\baselineskip%
|
|
\fi
|
|
\fi
|
|
\fi}}
|
|
|
|
|
|
% V1.6
|
|
% This is a dynamically determined rigid spacer between the title/authors
|
|
% and the main text. This is used only for single column titles over two
|
|
% column text (most common)
|
|
% This is bit tricky because we have to ensure that the textheight of the
|
|
% main text is an integer multiple of \baselineskip
|
|
% otherwise underfull vbox problems may develop in the second column of the
|
|
% text on the titlepage
|
|
% The possible use of \pubid must also be taken into account.
|
|
\def\@IEEEdynamictitlevspace{{%
|
|
% we run within a group so that all the macros can be forgotten when we are done
|
|
\def\thanks##1{\relax}%don't allow \thanks to run when we evaluate the vbox height
|
|
\normalfont\normalsize% we declare more descriptive variable names
|
|
\let\@maintextheight=\@IEEEtrantmpdimenA%height of the main text columns
|
|
\let\@INTmaintextheight=\@IEEEtrantmpdimenB%height of the main text columns with integer # lines
|
|
% set the nominal and minimum values for the title spacer
|
|
% the dynamic algorithm will not allow the spacer size to
|
|
% become less than \@MINtitlevspace - instead it will be
|
|
% lengthened
|
|
% default to journal values
|
|
\def\@NORMtitlevspace{2.5\baselineskip}%
|
|
\def\@MINtitlevspace{2\baselineskip}%
|
|
% conferences and technotes need tighter spacing
|
|
\if@confmode%conference
|
|
\def\@NORMtitlevspace{1\baselineskip}%
|
|
\def\@MINtitlevspace{0.75\baselineskip}%
|
|
\fi
|
|
\if@technote%technote
|
|
\def\@NORMtitlevspace{1\baselineskip}%
|
|
\def\@MINtitlevspace{0.75\baselineskip}%
|
|
\fi%
|
|
% get the height that the title will take up
|
|
\if@peerreviewoption
|
|
\settoheight{\@maintextheight}{\vbox{\hsize\textwidth \@IEEEpeerreviewmaketitle}}%
|
|
\else
|
|
\settoheight{\@maintextheight}{\vbox{\hsize\textwidth \@maketitle}}%
|
|
\fi
|
|
\@maintextheight=-\@maintextheight% title takes away from maintext, so reverse sign
|
|
% add the height of the page textheight
|
|
\advance\@maintextheight by \textheight%
|
|
% correct for title pages using pubid
|
|
\if@peerreviewoption\else
|
|
% peerreview papers use the pubid on the cover page only.
|
|
% And the cover page uses a static spacer.
|
|
\if@IEEEusingpubid\advance\@maintextheight by -\@pubidpullup\fi
|
|
\fi%
|
|
% subtract off the nominal value of the title bottom spacer
|
|
\advance\@maintextheight by -\@NORMtitlevspace%
|
|
% \topskip takes away some too
|
|
\advance\@maintextheight by -\topskip%
|
|
% calculate the column height of the main text for lines
|
|
% now we calculate the main text height as if holding
|
|
% an integer number of \normalsize lines after the first
|
|
% and discard any excess fractional remainder
|
|
% we subtracted the first line, because the first line
|
|
% is placed \topskip into the maintext, not \baselineskip like the
|
|
% rest of the lines.
|
|
\@INTmaintextheight=\@maintextheight%
|
|
\divide\@INTmaintextheight by \baselineskip%
|
|
\multiply\@INTmaintextheight by \baselineskip%
|
|
% now we calculate how much the title spacer height will
|
|
% have to be reduced from nominal (\@REDUCEmaintextheight is always
|
|
% a positive value) so that the maintext area will contain an integer
|
|
% number of normal size lines
|
|
% we change variable names here (to avoid confusion) as we no longer
|
|
% need \@INTmaintextheight and can reuse its dimen register
|
|
\let\@REDUCEmaintextheight=\@INTmaintextheight%
|
|
\advance\@REDUCEmaintextheight by -\@maintextheight%
|
|
\advance\@REDUCEmaintextheight by \baselineskip%
|
|
% this is the calculated height of the spacer
|
|
% we change variable names here (to avoid confusion) as we no longer
|
|
% need \@maintextheight and can reuse its dimen register
|
|
\let\@COMPENSATElen=\@maintextheight%
|
|
\@COMPENSATElen=\@NORMtitlevspace% set the nominal value
|
|
% we go with the reduced length if it is smaller than an increase
|
|
\ifdim\@REDUCEmaintextheight < 0.5\baselineskip\relax%
|
|
\advance\@COMPENSATElen by -\@REDUCEmaintextheight%
|
|
% if the resulting spacer is too small back out and go with an increase instead
|
|
\ifdim\@COMPENSATElen<\@MINtitlevspace\relax%
|
|
\advance\@COMPENSATElen by \baselineskip%
|
|
\fi%
|
|
\else%
|
|
% go with an increase because it is closer to the nominal than a decrease
|
|
\advance\@COMPENSATElen by -\@REDUCEmaintextheight%
|
|
\advance\@COMPENSATElen by \baselineskip%
|
|
\fi%
|
|
% set the calculated rigid spacer
|
|
\vspace{\@COMPENSATElen}}}
|
|
|
|
|
|
|
|
% V1.6
|
|
% we allow the user access to the last part of the title area
|
|
% useful in emergencies such as when a different spacing is needed
|
|
% This text is NOT compensated for in the dynamic sizer.
|
|
\let\@IEEEaftertitletext=\relax
|
|
\def\IEEEaftertitletext#1{\def\@IEEEaftertitletext{#1}}
|
|
|
|
|
|
% V1.6 have abstract and keywords strip leading spaces, pars and newlines
|
|
% so that spacing is more tightly controlled.
|
|
\def\abstract{\normalfont%
|
|
\if@twocolumn%
|
|
\@IEEEabskeysecsize\bfseries\textit{Abstract}---\,%
|
|
\else%
|
|
\begin{center}\vspace{-1.78ex}\@IEEEabskeysecsize\textbf{Abstract}\end{center}\quotation\@IEEEabskeysecsize%
|
|
\fi\@IEEEgobbleleadPARNLSP}
|
|
% V1.6 IEEE wants only 1 pica from end of abstract to introduction heading when in
|
|
% conference mode (the heading already has this much above it)
|
|
\def\endabstract{\relax\if@confmode\vspace{0ex}\else\vspace{1.34ex}\fi\par\if@twocolumn\else\endquotation\fi%
|
|
\normalfont\normalsize}
|
|
|
|
|
|
\def\keywords{\normalfont%
|
|
% IEEE uses the term (in bold italics) "Index Terms" now.
|
|
\if@twocolumn%
|
|
\@IEEEabskeysecsize\bfseries\textit{Index Terms}---\,\relax%
|
|
\else%
|
|
\begin{center}\@IEEEabskeysecsize\bfseries Index Terms\end{center}\quotation\@IEEEabskeysecsize%
|
|
\fi\@IEEEgobbleleadPARNLSP}
|
|
\def\endkeywords{\relax\if@technote\vspace{1.34ex}\else\vspace{0.67ex}\fi%
|
|
\par\if@twocolumn\else\endquotation\fi%
|
|
\normalsize\normalfont}
|
|
|
|
|
|
% gobbles all leading \, \\ and \par, upon finding first token that
|
|
% is not a \ , \\ or a \par, it ceases and returns that token
|
|
%
|
|
% used to strip leading \, \\ and \par from the input
|
|
% so that such things in the beginning of an environment will not
|
|
% affect the formatting of the text
|
|
\long\def\@IEEEgobbleleadPARNLSP#1{\let\@IEEEswallowthistoken=0%
|
|
\let\@IEEEgobbleleadPARNLSPtoken#1%
|
|
\let\@IEEEgobbleleadPARtoken=\par%
|
|
\let\@IEEEgobbleleadNLtoken=\\%
|
|
\let\@IEEEgobbleleadSPtoken=\ %
|
|
\def\@IEEEgobbleleadSPMACRO{\ }%
|
|
\ifx\@IEEEgobbleleadPARNLSPtoken\@IEEEgobbleleadPARtoken%
|
|
\let\@IEEEswallowthistoken=1%
|
|
\fi%
|
|
\ifx\@IEEEgobbleleadPARNLSPtoken\@IEEEgobbleleadNLtoken%
|
|
\let\@IEEEswallowthistoken=1%
|
|
\fi%
|
|
\ifx\@IEEEgobbleleadPARNLSPtoken\@IEEEgobbleleadSPtoken%
|
|
\let\@IEEEswallowthistoken=1%
|
|
\fi%
|
|
% a control space will come in as a macro
|
|
% when it is the last one on a line
|
|
\ifx\@IEEEgobbleleadPARNLSPtoken\@IEEEgobbleleadSPMACRO%
|
|
\let\@IEEEswallowthistoken=1%
|
|
\fi%
|
|
% if we have to swallow this token, do so and taste the next one
|
|
% else spit it out and stop gobbling
|
|
\ifx\@IEEEswallowthistoken 1\let\@IEEEnextgobbleleadPARNLSP=\@IEEEgobbleleadPARNLSP\else%
|
|
\let\@IEEEnextgobbleleadPARNLSP=#1\fi%
|
|
\@IEEEnextgobbleleadPARNLSP}%
|
|
|
|
|
|
|
|
|
|
% TITLING OF SECTIONS
|
|
\def\@IEEEsectpunct{:\ \,} % Punctuation after run-in section heading (headings which are
|
|
% part of the paragraphs), need little bit more than a space
|
|
|
|
\def\@seccntformat#1{\csname the#1dis\endcsname\hskip 0.5em\relax}
|
|
|
|
\def\@sect#1#2#3#4#5#6[#7]#8{%
|
|
\ifnum #2>\c@secnumdepth%
|
|
\def\@svsec{}%
|
|
\else%
|
|
\refstepcounter{#1}
|
|
% load section label and spacer into \@svsec
|
|
\protected@edef\@svsec{\@seccntformat{#1}\relax}%
|
|
\fi%
|
|
\@tempskipa #5\relax%
|
|
\ifdim \@tempskipa>\z@% tempskipa determines whether is treated as a high
|
|
\begingroup #6\relax% or low level heading
|
|
\noindent % subsections are NOT indented
|
|
% print top level headings. \@svsec is label, #8 is heading title
|
|
%\@hangfrom{\hskip #3\relax\@svsec}{\interlinepenalty \@M #8\par}
|
|
% IEEE does not block indent the section title text, it flows like normal
|
|
\relax{\hskip #3\relax\@svsec}{\interlinepenalty \@M #8\par}%
|
|
\endgroup%
|
|
% got rid of sectionmark stuff
|
|
% \csname #1mark\endcsname{#7}
|
|
\addcontentsline{toc}{#1}{\ifnum #2>\c@secnumdepth\relax\else%
|
|
\protect\numberline{\csname the#1\endcsname}\fi#7}%
|
|
\else % printout low level headings
|
|
% svsechd seems to swallow the trailing space, protect it with \mbox{}
|
|
% got rid of sectionmark stuff
|
|
\def\@svsechd{#6\hskip #3\@svsec #8\@IEEEsectpunct\mbox{}%\csname #1mark\endcsname{#7}
|
|
\addcontentsline{toc}{#1}{\ifnum #2>\c@secnumdepth\relax\else%
|
|
\protect\numberline{\csname the#1\endcsname}\fi#7}}
|
|
\fi%skip down
|
|
\@xsect{#5}}
|
|
|
|
% section* handler
|
|
\def\@ssect#1#2#3#4#5{\@tempskipa #3\relax%
|
|
\ifdim \@tempskipa>\z@%
|
|
%\begingroup #4\@hangfrom{\hskip #1}{\interlinepenalty \@M #5\par}\endgroup
|
|
% IEEE does not block indent the section title text, it flows like normal
|
|
\begingroup \noindent #4\relax{\hskip #1}{\interlinepenalty \@M #5\par}\endgroup%
|
|
% svsechd swallows the trailing space, protect it with \mbox{}
|
|
\else \def\@svsechd{#4\hskip #1\relax #5\@IEEEsectpunct\mbox{}}\fi%
|
|
\@xsect{#3}}
|
|
|
|
|
|
%% SECTION heading spacing and font
|
|
%%
|
|
% arguments are: #1 - sectiontype name
|
|
% (for \@sect) #2 - section level
|
|
% #3 - section heading indent
|
|
% #4 - top separation (absolute value used, neg indicates not to indent main text)
|
|
% If negative, make stretch parts negative too!
|
|
% #5 - (absolute value used) positive: bottom separation after heading,
|
|
% negative: amount to indent main text after heading
|
|
% Both #4 and #5 negative means to indent main text and use negative top separation
|
|
% #6 - font control
|
|
% You've got to have \normalfont\normalsize in the font specs below to prevent
|
|
% trouble when you do something like:
|
|
% \section{Note}{\ttfamily TT-TEXT} is known to ...
|
|
% IEEE sometimes REALLY stretches the area before a section
|
|
% heading by up to about 0.5in. However, it may not be a good
|
|
% idea to let LaTeX have quite this much rubber.
|
|
\if@confmode%
|
|
% IEEE wants section heading spacing to decrease for conference mode
|
|
\def\section{\@startsection{section}{1}{\z@}{1.5ex plus 1.5ex minus 0.5ex}%
|
|
{0.7ex plus 1ex minus 0ex}{\normalfont\normalsize\centering\scshape}}%
|
|
\def\subsection{\@startsection{subsection}{2}{\z@}{1.5ex plus 1.5ex minus 0.5ex}%
|
|
{0.7ex plus .5ex minus 0ex}{\normalfont\normalsize\itshape}}%
|
|
\else % for journals
|
|
\def\section{\@startsection{section}{1}{\z@}{3.0ex plus 1.5ex minus 1.5ex}% V1.6 3.0ex from 3.5ex
|
|
{0.7ex plus 1ex minus 0ex}{\normalfont\normalsize\centering\scshape}}%
|
|
\def\subsection{\@startsection{subsection}{2}{\z@}{3.5ex plus 1.5ex minus 1.5ex}%
|
|
{0.7ex plus .5ex minus 0ex}{\normalfont\normalsize\itshape}}%
|
|
\fi
|
|
% decided to put in a little rubber above the section, might help somebody
|
|
\def\subsubsection{\@startsection{subsubsection}{3}{\parindent}{0ex plus 0.1ex minus 0.1ex}%
|
|
{0ex}{\normalfont\normalsize\itshape}}%
|
|
\def\paragraph{\@startsection{paragraph}{4}{2\parindent}{0ex plus 0.1ex minus 0.1ex}%
|
|
{0ex}{\normalfont\normalsize\itshape}}%
|
|
|
|
|
|
|
|
%% ENVIRONMENTS
|
|
% "box" symbols at end of proofs
|
|
\def\QEDclosed{\mbox{\rule[0pt]{1.3ex}{1.3ex}}} % for a filled box
|
|
% V1.6 some journals use an open box instead that will just fit around a closed one
|
|
\def\QEDopen{{\setlength{\fboxsep}{0pt}\setlength{\fboxrule}{0.2pt}\fbox{\rule[0pt]{0pt}{1.3ex}\rule[0pt]{1.3ex}{0pt}}}}
|
|
\def\QED{\QEDclosed} % default to closed
|
|
|
|
\def\proof{\noindent\hspace{2em}{\itshape Proof: }}
|
|
\def\endproof{\hspace*{\fill}~\QED\par\endtrivlist\unskip}
|
|
%\itemindent is set to \z@ by list, so define new temporary variable
|
|
\newdimen\@IEEEtmpitemindent
|
|
\def\@begintheorem#1#2{\@IEEEtmpitemindent\itemindent\topsep 0pt\rmfamily\trivlist%
|
|
\item[\hskip \labelsep{\indent\itshape #1\ #2:}]\itemindent\@IEEEtmpitemindent}
|
|
\def\@opargbegintheorem#1#2#3{\@IEEEtmpitemindent\itemindent\topsep 0pt\rmfamily \trivlist%
|
|
% V1.6 IEEE is back to using () around theorem names which are also in italics
|
|
% Thanks to Christian Peel for reporting this.
|
|
\item[\hskip\labelsep{\indent\itshape #1\ #2\ (#3):}]\itemindent\@IEEEtmpitemindent}
|
|
\def\@endtheorem{\endtrivlist\unskip}
|
|
|
|
% V1.6
|
|
% display command for the section the theorem is in - so that \thesection
|
|
% is not used as this will be in Roman numerals when we want arabic.
|
|
% LaTeX2e uses \def\@thmcounter#1{\noexpand\arabic{#1}} for the theorem number
|
|
% (second part) display and \def\@thmcountersep{.} as a separator.
|
|
\def\@IEEEthmcounterin#1{\arabic{#1}}
|
|
% redefine the #1#2[#3] form of newtheorem to use a hook to \@IEEEthmcounterin
|
|
\def\@xnthm#1#2[#3]{%
|
|
\expandafter\@ifdefinable\csname #1\endcsname
|
|
{\@definecounter{#1}\@newctr{#1}[#3]%
|
|
\expandafter\xdef\csname the#1\endcsname{%
|
|
\noexpand\@IEEEthmcounterin{#3}\@thmcountersep\@thmcounter{#1}}%
|
|
\global\@namedef{#1}{\@thm{#1}{#2}}%
|
|
\global\@namedef{end#1}{\@endtheorem}}}
|
|
|
|
|
|
|
|
%% SET UP THE DEFAULT PAGESTYLE
|
|
\ps@headings
|
|
\pagenumbering{arabic}
|
|
|
|
% normally the page counter starts at 1
|
|
\setcounter{page}{1}
|
|
% however, for peerreview the cover sheet is page 0 or page -1
|
|
% (for duplex printing)
|
|
\if@peerreviewoption
|
|
\if@twoside
|
|
\setcounter{page}{-1}
|
|
\else
|
|
\setcounter{page}{0}
|
|
\fi
|
|
\fi
|
|
|
|
% standard book class behavior - let bottom line float up and down as
|
|
% needed when single sided
|
|
\if@twoside\else\raggedbottom\fi
|
|
% if two column - turn on twocolumn, allow word spacings to stretch more and
|
|
% enforce a rigid position for the last lines
|
|
\if@twocolumnmode
|
|
% the peer review option delays invoking twocolumn
|
|
\if@peerreviewoption\else
|
|
\twocolumn
|
|
\fi
|
|
\sloppy
|
|
\flushbottom
|
|
\fi
|
|
|
|
|
|
|
|
|
|
% \APPENDIX and \APPENDICES definitions
|
|
|
|
% This is the \@ifmtarg command from the LaTeX ifmtarg package
|
|
% by Peter Wilson (CUA) and Donald Arseneau
|
|
% \@ifmtarg is used to determine if an argument to a command
|
|
% is present or not.
|
|
% For instance:
|
|
% \@ifmtarg{#1}{\typeout{empty}}{\typeout{has something}}
|
|
% \@ifmtarg is used with our redefined \section command if
|
|
% \appendices is invoked.
|
|
% The command \section will behave slightly differently depending
|
|
% on whether the user specifies a title:
|
|
% \section{My appendix title}
|
|
% or not:
|
|
% \section{}
|
|
% This way, we can eliminate the blank lines where the title
|
|
% would be, and the unneeded : after Appendix in the table of
|
|
% contents
|
|
\begingroup
|
|
\catcode`\Q=3
|
|
\long\gdef\@ifmtarg#1{\@xifmtarg#1QQ\@secondoftwo\@firstoftwo\@nil}
|
|
\long\gdef\@xifmtarg#1#2Q#3#4#5\@nil{#4}
|
|
\endgroup
|
|
% end of \@ifmtarg defs
|
|
|
|
% save the "original" meaning of \section so we can redefine
|
|
% \section after a call to \appendix or \appendices
|
|
\let\@IEEEappendixsavesection\section
|
|
|
|
% neat trick to grab and process the argument from \section{argument}
|
|
% we process differently if the user invoked \section{} with no
|
|
% argument (title)
|
|
% note we reroute the call to the old \section*
|
|
\def\@IEEEprocessthesectionargument#1{%
|
|
\@ifmtarg{#1}{%
|
|
\@IEEEappendixsavesection*{Appendix \thesectiondis}%
|
|
\addcontentsline{toc}{section}{Appendix \thesection}}{%
|
|
\@IEEEappendixsavesection*{Appendix \thesectiondis \\* #1}%
|
|
\addcontentsline{toc}{section}{Appendix \thesection: #1}}}
|
|
|
|
% we use this if the user calls \section{} after
|
|
% \appendix-- which has no meaning. So, we ignore the
|
|
% command and its argument. Then, warn the user.
|
|
\def\@IEEEdestroythesectionargument#1{\typeout{** WARNING: Ignoring useless
|
|
\protect\section\space in Appendix (line \the\inputlineno).}}
|
|
|
|
|
|
% remember \thesection forms will be displayed in \ref calls
|
|
% and in the Table of Contents.
|
|
% The \sectiondis form is used in the actual heading itself
|
|
|
|
% appendix command for one single appendix
|
|
% normally has no heading. However, if you want a
|
|
% heading, you can do so via the optional argument:
|
|
% \appendix[Optional Heading]
|
|
\def\appendix{\relax}
|
|
\renewcommand{\appendix}[1][]{\par%
|
|
% v1.6 keep hyperref's identifiers unique
|
|
\def\theHsection{Appendix.A}%
|
|
% v1.6 adjust hyperref's string name for the section
|
|
\xdef\Hy@chapapp{appendix}%
|
|
\setcounter{section}{0}%
|
|
\setcounter{subsection}{0}%
|
|
\setcounter{subsubsection}{0}%
|
|
\setcounter{paragraph}{0}%
|
|
\def\thesection{}%
|
|
\def\thesectiondis{}%
|
|
\def\thesubsection{\Alph{subsection}}%
|
|
\refstepcounter{section}% update the \ref counter
|
|
\@ifmtarg{#1}{\@IEEEappendixsavesection*{Appendix}%
|
|
\addcontentsline{toc}{section}{Appendix}}{%
|
|
\@IEEEappendixsavesection*{Appendix \\* #1}%
|
|
\addcontentsline{toc}{section}{Appendix: #1}}%
|
|
% redefine \section command for appendix
|
|
% leave \section* as is
|
|
\def\section{\@ifstar{\@IEEEappendixsavesection*}{%
|
|
\@IEEEdestroythesectionargument}}% throw out the argument
|
|
% of the normal form
|
|
}
|
|
|
|
|
|
% provides the user a way to choose between
|
|
% Appendix A
|
|
% and
|
|
% Appendix I
|
|
% notation
|
|
% defaults to Roman.
|
|
\newif\ifuseRomanappendices
|
|
\useRomanappendicestrue
|
|
|
|
|
|
% appendices command for multiple appendices
|
|
% user then calls \section with an argument (possibly empty) to
|
|
% declare the individual appendices
|
|
\def\appendices{\par%
|
|
% v1.6 keep hyperref's identifiers unique
|
|
\def\theHsection{Appendix.\Alph{section}}%
|
|
% v1.6 adjust hyperref's string name for the section
|
|
\xdef\Hy@chapapp{appendix}%
|
|
\setcounter{section}{-1}% we want \refstepcounter to use section 0
|
|
\setcounter{subsection}{0}%
|
|
\setcounter{subsubsection}{0}%
|
|
\setcounter{paragraph}{0}%
|
|
\ifuseRomanappendices%
|
|
\def\thesection{\Roman{section}}%
|
|
\def\thesectiondis{\Roman{section}}%
|
|
\else%
|
|
\def\thesection{\Alph{section}}%
|
|
\def\thesectiondis{\Alph{section}}%
|
|
\fi%
|
|
\refstepcounter{section}% update the \ref counter
|
|
\setcounter{section}{0}% NEXT \section will be the FIRST appendix
|
|
% redefine \section command for appendices
|
|
% leave \section* as is
|
|
\def\section{\@ifstar{\@IEEEappendixsavesection*}{% process the *-form
|
|
\refstepcounter{section}% or is a new section so,
|
|
\@IEEEprocessthesectionargument}}% process the argument
|
|
% of the normal form
|
|
}
|
|
|
|
|
|
|
|
% \PARstart
|
|
% Definition for the big two line drop cap letter at the beginning of the
|
|
% first paragraph of journal papers. The first argument is the first letter
|
|
% of the first word, the second argument is the remaining letters of the
|
|
% first word which will be rendered in upper case.
|
|
% In V1.6 this has been completely rewritten to:
|
|
%
|
|
% 1. no longer have problems when the user begins an environment
|
|
% within the paragraph that uses \PARstart.
|
|
% 2. auto-detect and use the current font family
|
|
% 3. revise handling of the space at the end of the first word so that
|
|
% interword glue will now work as normal.
|
|
% 4. produce correctly aligned edges for the (two) indented lines.
|
|
%
|
|
% We generalize things via control macros - playing with these is fun too.
|
|
%
|
|
% the number of lines that are indented to clear it
|
|
\def\@IEEEPARstartDROPLINES{2}
|
|
% minimum number of lines left on a page to allow a \@PARstart
|
|
% Does not take into consideration rubber shrink, so it tends to
|
|
% be overly cautious
|
|
\def\@IEEEPARstartMINPAGELINES{2}
|
|
% the depth the letter is lowered below the baseline
|
|
% the height (and size) of the letter is determined by the sum
|
|
% of this value and the height of a capital "T" in the current
|
|
% font. It is a good idea to set this value in terms of the baselineskip
|
|
% so that it can respond to changes therein.
|
|
\def\@IEEEPARstartDROPDEPTH{1.1\baselineskip}
|
|
% This is the separation distance from the drop letter to the main text.
|
|
% Lengths that depend on the font (i.e., ex, em, etc.) will be referenced
|
|
% to the font that is active when PARstart is called.
|
|
\def\@IEEEPARstartSEP{0.15em}
|
|
|
|
|
|
% definition of \PARstart
|
|
% THIS IS A CONTROLLED SPACING AREA, DO NOT ALLOW SPACES WITHIN THESE LINES
|
|
%
|
|
% The token \@IEEEPARstartfont will be globally defined after the first use
|
|
% of \PARstart and will be a font command which creates the big letter
|
|
% The first argument is the first letter of the first word and the second
|
|
% argument is the rest of the first word(s).
|
|
\def\PARstart#1#2{\par{%
|
|
% if this page does not have enough space, break it and lets start
|
|
% on a new one
|
|
\@IEEEtranneedspace{\@IEEEPARstartMINPAGELINES\baselineskip}{\relax}%
|
|
% calculate the desired height of the big letter
|
|
% it extends from the top of a capital "T" in the current font
|
|
% down to \@IEEEPARstartDROPDEPTH below the current baseline
|
|
\settoheight{\@IEEEtrantmpdimenA}{T}%
|
|
\addtolength{\@IEEEtrantmpdimenA}{\@IEEEPARstartDROPDEPTH}%
|
|
% extract the name of the current font in bold
|
|
% and place it in \@IEEEPARstartFONTNAME
|
|
\def\@IEEEPARstartGETFIRSTWORD##1 ##2\relax{##1}%
|
|
{\bfseries%
|
|
\edef\@IEEEPARstartFONTNAMESPACE{\fontname\font\space}%
|
|
\xdef\@IEEEPARstartFONTNAME{\expandafter\@IEEEPARstartGETFIRSTWORD\@IEEEPARstartFONTNAMESPACE\relax}}%
|
|
% define a font based on this name with a point size equal to the desired
|
|
% height of the drop letter
|
|
\font\@IEEEPARstartsubfont\@IEEEPARstartFONTNAME\space at \@IEEEtrantmpdimenA\relax%
|
|
% save this value as a counter (integer) value (sp points)
|
|
\@IEEEtrantmpcountA=\@IEEEtrantmpdimenA%
|
|
% now get the height of the actual letter produced by this font size
|
|
\settoheight{\@IEEEtrantmpdimenB}{\@IEEEPARstartsubfont\MakeUppercase{#1}}%
|
|
% If something bogus happens like the first argument is empty or the
|
|
% current font is strange, do not allow a zero height.
|
|
\ifdim\@IEEEtrantmpdimenB=0pt\relax%
|
|
\typeout{** WARNING: PARstart drop letter has zero height! (line \the\inputlineno)}%
|
|
\typeout{ Forcing the drop letter font size to 10pt.}%
|
|
\@IEEEtrantmpdimenB=10pt%
|
|
\fi%
|
|
% and store it as a counter
|
|
\@IEEEtrantmpcountB=\@IEEEtrantmpdimenB%
|
|
% Since a font size doesn't exactly correspond to the height of the capital
|
|
% letters in that font, the actual height of the letter, \@IEEEtrantmpcountB,
|
|
% will be less than that desired, \@IEEEtrantmpcountA
|
|
% we need to raise the font size, \@IEEEtrantmpdimenA
|
|
% by \@IEEEtrantmpcountA / \@IEEEtrantmpcountB
|
|
% But, TeX doesn't have floating point division, so we have to use integer
|
|
% division. Hence the use of the counters.
|
|
% We need to reduce the denominator so that the loss of the remainder will
|
|
% have minimal affect on the accuracy of the result
|
|
\divide\@IEEEtrantmpcountB by 200%
|
|
\divide\@IEEEtrantmpcountA by \@IEEEtrantmpcountB%
|
|
% Then reequalize things when we use TeX's ability to multiply by
|
|
% floating point values
|
|
\@IEEEtrantmpdimenB=0.005\@IEEEtrantmpdimenA%
|
|
\multiply\@IEEEtrantmpdimenB by \@IEEEtrantmpcountA%
|
|
% \@IEEEPARstartfont is globaly set to the calculated font of the big letter
|
|
% We need to carry this out of the local calculation area to to create the
|
|
% big letter.
|
|
\global\font\@IEEEPARstartfont\@IEEEPARstartFONTNAME\space at \@IEEEtrantmpdimenB%
|
|
% Now set \@IEEEtrantmpdimenA to the width of the big letter
|
|
% We need to carry this out of the local calculation area to set the
|
|
% hanging indent
|
|
\settowidth{\global\@IEEEtrantmpdimenA}{\@IEEEPARstartfont\MakeUppercase{#1}}}%
|
|
% end of the isolated calculation environment
|
|
% add in the extra clearance we want
|
|
\advance\@IEEEtrantmpdimenA by \@IEEEPARstartSEP%
|
|
% \@IEEEtrantmpdimenA has the width of the big letter plus the
|
|
% separation space and \@IEEEPARstartfont is the font we need to use
|
|
% Now, we make the letter and issue the hanging indent command
|
|
% The letter is placed in a box of zero width and height so that other
|
|
% text won't be displaced by it.
|
|
\noindent\hangindent\@IEEEtrantmpdimenA\hangafter=-\@IEEEPARstartDROPLINES%
|
|
\makebox[0pt][l]{\hspace{-\@IEEEtrantmpdimenA}\raisebox{-\@IEEEPARstartDROPDEPTH}[0pt][0pt]{\@IEEEPARstartfont\MakeUppercase{#1}}}\MakeUppercase{#2}}
|
|
|
|
|
|
% V1.6 \CMPARstart is no longer needed as \PARstart now uses whatever
|
|
% the current font family is.
|
|
% \CMPARstart is provided here for backward compatability.
|
|
\let\CMPARstart=\PARstart
|
|
|
|
|
|
|
|
% determines if the space remaining on a given page is equal to or greater
|
|
% than the specified space of argument one
|
|
% if not, execute argument two (only if the remaining space is greater than zero)
|
|
% and issue a \newpage
|
|
%
|
|
% example: \@IEEEtranneedspace{2in}{\vfill}
|
|
%
|
|
% Does not take into consideration rubber shrinkage, so it tends to
|
|
% be overly cautious
|
|
% Based on an example posted by Donald Arseneau
|
|
% Note this macro uses \@IEEEtrantmpdimenB internally for calculations,
|
|
% so DO NOT PASS \@IEEEtrantmpdimenB to this routine
|
|
% if you need a dimen register, import with \@IEEEtrantmpdimenA instead
|
|
\def\@IEEEtranneedspace#1#2{\penalty-100\begingroup%shield temp variable
|
|
\@IEEEtrantmpdimenB\pagegoal\advance\@IEEEtrantmpdimenB-\pagetotal% space left
|
|
\ifdim #1>\@IEEEtrantmpdimenB\relax% not enough space left
|
|
\ifdim\@IEEEtrantmpdimenB>\z@\relax #2\fi%
|
|
\newpage%
|
|
\fi\endgroup}
|
|
|
|
|
|
|
|
% BIOGRAPHY ENVIRONMENT
|
|
% Allows user to enter BIOGRAPHY leaving place for picture (adapts to font size)
|
|
% As of V1.5, a new optional argument allows you to have a real graphic!
|
|
% V1.5 and later also fixes the "colliding biographies" which could happen when a
|
|
% biography's text was shorter than the space for the photo.
|
|
% MDS 7/2001
|
|
% V1.6 prevent multiple biographies from making multiple TOC entries
|
|
\newif\if@biographyTOCentrynotmade
|
|
\global\@biographyTOCentrynotmadetrue
|
|
|
|
% biography counter so hyperref can jump directly to the biographies
|
|
% and not just the previous section
|
|
\newcounter{biography}
|
|
\setcounter{biography}{0}
|
|
|
|
% photo area size
|
|
\def\@IEEEBIOphotowidth{1.0in} % width of the biography photo area
|
|
\def\@IEEEBIOphotodepth{1.25in} % depth (height) of the biography photo area
|
|
% area cleared for photo
|
|
\def\@IEEEBIOhangwidth{1.14in} % width cleared for the biography photo area
|
|
\def\@IEEEBIOhangdepth{1.25in} % depth cleared for the biography photo area
|
|
% actual depth will be a multiple of
|
|
% \baselineskip, rounded up
|
|
\def\@IEEEBIOskipN{4\baselineskip}% nominal value of the vskip above the biography
|
|
|
|
\newenvironment{biography}[2][]{\normalfont\footnotesize%
|
|
\unitlength 1in\parskip=0pt\par\parindent 1em\interlinepenalty500%
|
|
% we need enough space to support the hanging indent
|
|
% the nominal value of the spacer
|
|
% and one extra line for good measure
|
|
\@IEEEtrantmpdimenA=\@IEEEBIOhangdepth%
|
|
\advance\@IEEEtrantmpdimenA by \@IEEEBIOskipN%
|
|
\advance\@IEEEtrantmpdimenA by 1\baselineskip%
|
|
% if this page does not have enough space, break it and lets start
|
|
% with a new one
|
|
\@IEEEtranneedspace{\@IEEEtrantmpdimenA}{\relax}%
|
|
% nominal spacer can strech, not shrink use 1fil so user can out stretch with \vfill
|
|
\vskip \@IEEEBIOskipN plus 1fil minus 0\baselineskip%
|
|
% the default box for where the photo goes
|
|
\def\@IEEEtempbiographybox{{\setlength{\fboxsep}{0pt}\framebox{\begin{minipage}[b][\@IEEEBIOphotodepth][c]{\@IEEEBIOphotowidth}\centering PLACE\\ PHOTO\\ HERE \end{minipage}}}}%
|
|
%
|
|
% detect if the optional argument was supplied, this requires the
|
|
% \@ifmtarg command as defined in the appendix section above
|
|
% and if so, override the default box with what they want
|
|
\@ifmtarg{#1}{\relax}{\def\@IEEEtempbiographybox{\mbox{\begin{minipage}[b][\@IEEEBIOphotodepth][c]{\@IEEEBIOphotowidth}%
|
|
\centering%
|
|
#1%
|
|
\end{minipage}}}}% end if optional argument supplied
|
|
% Make an entry into the table of contents only if we have not done so before
|
|
\if@biographyTOCentrynotmade%
|
|
% link labels to the biography counter so hyperref will jump
|
|
% to the biography, not the previous section
|
|
\setcounter{biography}{-1}%
|
|
\refstepcounter{biography}%
|
|
\addcontentsline{toc}{section}{Biographies}%
|
|
\global\@biographyTOCentrynotmadefalse%
|
|
\fi%
|
|
% one more biography
|
|
\refstepcounter{biography}%
|
|
% Make an entry for this name into the table of contents
|
|
\addcontentsline{toc}{subsection}{#2}%
|
|
% V1.6 properly handle if a new paragraph should occur while the
|
|
% hanging indent is still active. Do this by redefining \par so
|
|
% that it will not start a new paragraph. (But it will appear to the
|
|
% user as if it did.) Also, strip any leading pars, newlines, or spaces.
|
|
\let\@IEEEBIOORGparCMD=\par% save the original \par command
|
|
\edef\par{\hfil\break\indent}% the new \par will not be a "real" \par
|
|
\settoheight{\@IEEEtrantmpdimenA}{\@IEEEtempbiographybox}% get height of biography box
|
|
\@IEEEtrantmpdimenB=\@IEEEBIOhangdepth%
|
|
\@IEEEtrantmpcountA=\@IEEEtrantmpdimenB% countA has the hang depth
|
|
\divide\@IEEEtrantmpcountA by \baselineskip% calculates lines needed to produce the hang depth
|
|
\advance\@IEEEtrantmpcountA by 1% ensure we overestimate
|
|
% set the hanging indent
|
|
\hangindent\@IEEEBIOhangwidth%
|
|
\hangafter-\@IEEEtrantmpcountA%
|
|
% reference the top of the photo area to the top of a capital T
|
|
\settoheight{\@IEEEtrantmpdimenB}{\mbox{T}}%
|
|
% set the photo box, give it zero width and height so as not to disturb anything
|
|
\noindent\makebox[0pt][l]{\hspace{-\@IEEEBIOhangwidth}\raisebox{\@IEEEtrantmpdimenB}[0pt][0pt]{\raisebox{-\@IEEEBIOphotodepth}[0pt][0pt]{\@IEEEtempbiographybox}}}%
|
|
% now place the author name and begin the bio text
|
|
\noindent\textbf{#2\ }\@IEEEgobbleleadPARNLSP}{\relax\let\par=\@IEEEBIOORGparCMD\par%
|
|
% 7/2001 V1.5 detect when the biography text is shorter than the photo area
|
|
% and pad the unused area - preventing a collision from the next biography entry
|
|
% MDS
|
|
\ifnum \prevgraf <\@IEEEtrantmpcountA\relax% detect when the biography text is shorter than the photo
|
|
\advance\@IEEEtrantmpcountA by -\prevgraf% calculate how many lines we need to pad
|
|
\advance\@IEEEtrantmpcountA by -1\relax% we compensate for the fact that we indented an extra line
|
|
\@IEEEtrantmpdimenA=\baselineskip% calculate the length of the padding
|
|
\multiply\@IEEEtrantmpdimenA by \@IEEEtrantmpcountA%
|
|
\noindent\rule{0pt}{\@IEEEtrantmpdimenA}% insert an invisible support strut
|
|
\fi%
|
|
\par\normalfont}
|
|
|
|
|
|
|
|
% V1.6
|
|
% added biography without a photo environment
|
|
\newenvironment{biographynophoto}[1]{%
|
|
% Make an entry into the table of contents only if we have not done so before
|
|
\if@biographyTOCentrynotmade%
|
|
% link labels to the biography counter so hyperref will jump
|
|
% to the biography, not the previous section
|
|
\setcounter{biography}{-1}%
|
|
\refstepcounter{biography}%
|
|
\addcontentsline{toc}{section}{Biographies}%
|
|
\global\@biographyTOCentrynotmadefalse%
|
|
\fi%
|
|
% one more biography
|
|
\refstepcounter{biography}%
|
|
% Make an entry for this name into the table of contents
|
|
\addcontentsline{toc}{subsection}{#1}%
|
|
\normalfont\footnotesize\interlinepenalty500%
|
|
\vskip 4\baselineskip plus 1fil minus 0\baselineskip%
|
|
\parskip=0pt\par%
|
|
\noindent\textbf{#1\ }\@IEEEgobbleleadPARNLSP}{\relax\par\normalfont}
|
|
|
|
|
|
% provide the user with some old font commands
|
|
% got this from article.cls
|
|
\DeclareOldFontCommand{\rm}{\normalfont\rmfamily}{\mathrm}
|
|
\DeclareOldFontCommand{\sf}{\normalfont\sffamily}{\mathsf}
|
|
\DeclareOldFontCommand{\tt}{\normalfont\ttfamily}{\mathtt}
|
|
\DeclareOldFontCommand{\bf}{\normalfont\bfseries}{\mathbf}
|
|
\DeclareOldFontCommand{\it}{\normalfont\itshape}{\mathit}
|
|
\DeclareOldFontCommand{\sl}{\normalfont\slshape}{\@nomath\sl}
|
|
\DeclareOldFontCommand{\sc}{\normalfont\scshape}{\@nomath\sc}
|
|
\DeclareRobustCommand*\cal{\@fontswitch\relax\mathcal}
|
|
\DeclareRobustCommand*\mit{\@fontswitch\relax\mathnormal}
|
|
|
|
|
|
% SPECIAL PAPER NOTICE COMMANDS
|
|
%
|
|
% holds the special notice text
|
|
\def\@specialpapernotice{\relax}
|
|
|
|
% for special papers, like invited papers, the user can do:
|
|
% \specialpapernotice{(Invited Paper)} before \maketitle
|
|
\def\specialpapernotice#1{\if@confmode%
|
|
\def\@specialpapernotice{{\sublargesize\textit{#1}\vspace*{1em}}}%
|
|
\else%
|
|
\def\@specialpapernotice{{\\*[1.5ex]\sublargesize\textit{#1}}\vspace*{-2ex}}%
|
|
\fi}
|
|
|
|
|
|
|
|
|
|
% PUBLISHER ID COMMANDS
|
|
% to insert a publisher's ID footer
|
|
% V1.6 \pubid has been changed so that the change in page size and style
|
|
% occurs in \maketitle. \pubid must now be issued prior to \maketitle
|
|
% use \pubidadjcol as before - in the second column of the title page
|
|
% These changes allow \maketitle to take the reduced page height into
|
|
% consideration when dynamically setting the space between the author
|
|
% names and the maintext.
|
|
%
|
|
% the amount the main text is pulled up to make room for the
|
|
% publisher's ID footer
|
|
% IEEE uses about 1.3\baselineskip for journals,
|
|
% dynamic title spacing will clean up the fraction
|
|
\def\@pubidpullup{1.3\baselineskip}
|
|
\if@technote
|
|
% for technotes it must be an integer of baselineskip as there can be no
|
|
% dynamic title spacing for two column mode technotes (the title is in the
|
|
% in first column) and we should maintain an integer number of lines in the
|
|
% second column
|
|
% There are some examples (such as older issues of "Transactions on
|
|
% Information Theory") in which IEEE really pulls the text off the ID for
|
|
% technotes - about 0.55in (or 4\baselineskip). We'll use 2\baselineskip
|
|
% and call it even.
|
|
\def\@pubidpullup{2\baselineskip}
|
|
\fi
|
|
|
|
% holds the ID text
|
|
\def\@pubid{\relax}
|
|
|
|
% flag so \maketitle can tell if \pubid was called
|
|
\newif\if@IEEEusingpubid
|
|
\global\@IEEEusingpubidfalse
|
|
% issue this command in the page to have the ID at the bottom
|
|
% V1.6 use before \maketitle
|
|
\def\pubid#1{\def\@pubid{#1} \global\@IEEEusingpubidtrue}
|
|
|
|
|
|
% command which will pull up (shorten) the column it is executed in
|
|
% to make room for the publisher ID. Place in the second column of
|
|
% the title page when using \pubid
|
|
% Is smart enough not to do anything when in single column text or
|
|
% if the user hasn't called \pubid
|
|
% currently needed in for the second column of a page with the
|
|
% publisher ID. If not needed in future releases, please provide this
|
|
% command and define it as \relax for backward compatibility
|
|
% v1.6b do not allow command to operate if the peer review option has been
|
|
% selected because \pubidadjcol will not be on the cover page.
|
|
\def\pubidadjcol{\if@peerreviewoption\else\if@twocolumn\if@IEEEusingpubid\enlargethispage{-\@pubidpullup}\fi\fi\fi}
|
|
|
|
% Special thanks to Peter Wilson, Daniel Luecking, and the other
|
|
% gurus at comp.text.tex, for helping me to understand how best to
|
|
% implement the pubid command in LaTeX.
|
|
|
|
|
|
|
|
%% Lockout some commands under various conditions
|
|
|
|
% general purpose bit bucket
|
|
\newsavebox{\@IEEEtranrubishbin}
|
|
|
|
% flags to prevent multiple warning messages
|
|
\newif\if@IEEEWARNthanks
|
|
\newif\if@IEEEWARNPARstart
|
|
\newif\if@IEEEWARNCMPARstart
|
|
\newif\if@IEEEWARNkeywords
|
|
\newif\if@IEEEWARNbiography
|
|
\newif\if@IEEEWARNbiographynophoto
|
|
\newif\if@IEEEWARNpubid
|
|
\newif\if@IEEEWARNpubidadjcol
|
|
\newif\if@IEEEWARNIEEEmembership
|
|
\newif\if@IEEEWARNIEEEaftertitletext
|
|
\@IEEEWARNthankstrue
|
|
\@IEEEWARNPARstarttrue
|
|
\@IEEEWARNCMPARstarttrue
|
|
\@IEEEWARNkeywordstrue
|
|
\@IEEEWARNbiographytrue
|
|
\@IEEEWARNbiographynophototrue
|
|
\@IEEEWARNpubidtrue
|
|
\@IEEEWARNpubidadjcoltrue
|
|
\@IEEEWARNIEEEmembershiptrue
|
|
\@IEEEWARNIEEEaftertitletexttrue
|
|
|
|
|
|
%% Lockout some commands when in various modes, but allow them to be restored if needed
|
|
%%
|
|
% save commands which might be locked out
|
|
% so that the user can later restore them if needed
|
|
\let\@IEEESAVECMDthanks\thanks
|
|
\let\@IEEESAVECMDPARstart\PARstart
|
|
\let\@IEEESAVECMDCMPARstart\CMPARstart
|
|
\let\@IEEESAVECMDkeywords\keywords
|
|
\let\@IEEESAVECMDendkeywords\endkeywords
|
|
\let\@IEEESAVECMDbiography\biography
|
|
\let\@IEEESAVECMDendbiography\endbiography
|
|
\let\@IEEESAVECMDbiographynophoto\biographynophoto
|
|
\let\@IEEESAVECMDendbiographynophoto\endbiographynophoto
|
|
\let\@IEEESAVECMDpubid\pubid
|
|
\let\@IEEESAVECMDpubidadjcol\pubidadjcol
|
|
\let\@IEEESAVECMDIEEEmembership\IEEEmembership
|
|
\let\@IEEESAVECMDIEEEaftertitletext\IEEEaftertitletext
|
|
|
|
|
|
% disable \PARstart when in draft mode
|
|
% This may have originally been done because the pre-V1.6 drop letter
|
|
% algorithm had problems with a non-unity baselinestretch
|
|
% At any rate, it seems too formal to have a drop letter in a draft
|
|
% paper.
|
|
\if@draftclsmode
|
|
\def\PARstart#1#2{#1#2\if@IEEEWARNPARstart\typeout{** ATTENTION: \noexpand\PARstart is disabled in draft mode (line \the\inputlineno).}\fi\global\@IEEEWARNPARstartfalse}
|
|
\def\CMPARstart#1#2{#1#2\if@IEEEWARNPARstart\typeout{** ATTENTION: \noexpand\CMPARstart is disabled in draft mode (line \the\inputlineno).}\fi\global\@IEEEWARNCMPARstartfalse}
|
|
\fi
|
|
% and for technotes
|
|
\if@technote
|
|
\def\PARstart#1#2{#1#2\if@IEEEWARNPARstart\typeout{** WARNING: \noexpand\PARstart is locked out for technotes (line \the\inputlineno).}\fi\global\@IEEEWARNPARstartfalse}
|
|
\def\CMPARstart#1#2{#1#2\if@IEEEWARNPARstart\typeout{** WARNING: \noexpand\CMPARstart is locked out for technotes (line \the\inputlineno).}\fi\global\@IEEEWARNCMPARstartfalse}
|
|
\fi
|
|
|
|
|
|
% lockout unneeded commands when in conference mode
|
|
\if@confmode
|
|
% when locked out, \thanks, \keywords, \biography, \biographynophoto, \pubid,
|
|
% \IEEEmembership and \IEEEaftertitletext will all swallow their given text.
|
|
% \PARstart and \CMPARstart will output a normal character instead
|
|
% warn the user about these commands only once to prevent the console screen
|
|
% from filling up with redundant messages
|
|
\def\thanks#1{\if@IEEEWARNthanks\typeout{** WARNING: \noexpand\thanks is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNthanksfalse}
|
|
\def\PARstart#1#2{#1#2\if@IEEEWARNPARstart\typeout{** WARNING: \noexpand\PARstart is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNPARstartfalse}
|
|
\def\CMPARstart#1#2{#1#2\if@IEEEWARNPARstart\typeout{** WARNING: \noexpand\CMPARstart is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNCMPARstartfalse}
|
|
|
|
\renewenvironment{keywords}[1]{\if@IEEEWARNkeywords\typeout{** WARNING: \noexpand\keywords is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNkeywordsfalse%
|
|
\setbox\@IEEEtranrubishbin\vbox\bgroup}{\egroup\relax}
|
|
|
|
% LaTeX treats environments and commands with optional arguments differently.
|
|
% the actual ("internal") command is stored as \\commandname
|
|
% (accessed via \csname\string\commandname\endcsname )
|
|
% the "external" command \commandname is a macro with code to determine
|
|
% whether or not the optional argument is presented and to provide the
|
|
% default if it is absent. So, in order to save and restore such a command
|
|
% we would have to save and restore \\commandname as well. But, if LaTeX
|
|
% ever changes the way it names the internal names, the trick would break.
|
|
% Instead let us just define a new environment so that the internal
|
|
% name can be left undisturbed.
|
|
\newenvironment{@IEEEbogusbiography}[2][]{\if@IEEEWARNbiography\typeout{** WARNING: \noexpand\biography is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNbiographyfalse%
|
|
\setbox\@IEEEtranrubishbin\vbox\bgroup}{\egroup\relax}
|
|
% and make biography point to our bogus biography
|
|
\let\biography=\@IEEEbogusbiography
|
|
\let\endbiography=\end@IEEEbogusbiography
|
|
|
|
\renewenvironment{biographynophoto}[1]{\if@IEEEWARNbiographynophoto\typeout{** WARNING: \noexpand\biographynophoto is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNbiographynophotofalse%
|
|
\setbox\@IEEEtranrubishbin\vbox\bgroup}{\egroup\relax}
|
|
|
|
\def\pubid#1{\if@IEEEWARNpubid\typeout{** WARNING: \noexpand\pubid is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNpubidfalse}
|
|
\def\pubidadjcol{\if@IEEEWARNpubidadjcol\typeout{** WARNING: \noexpand\pubidadjcol is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNpubidadjcolfalse}
|
|
\def\IEEEmembership#1{\if@IEEEWARNIEEEmembership\typeout{** WARNING: \noexpand\IEEEmembership is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEmembershipfalse}
|
|
\def\IEEEaftertitletext#1{\if@IEEEWARNIEEEaftertitletext\typeout{** WARNING: \noexpand\IEEEaftertitletext is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEaftertitletextfalse}
|
|
\fi
|
|
|
|
|
|
% provide a way to restore the commands that are locked out
|
|
\def\IEEEoverridecommandlockouts{%
|
|
\typeout{** ATTENTION: Overriding command lockouts (line \the\inputlineno).}%
|
|
\let\thanks\@IEEESAVECMDthanks%
|
|
\let\PARstart\@IEEESAVECMDPARstart%
|
|
\let\CMPARstart\@IEEESAVECMDCMPARstart%
|
|
\let\keywords\@IEEESAVECMDkeywords%
|
|
\let\endkeywords\@IEEESAVECMDendkeywords%
|
|
\let\biography\@IEEESAVECMDbiography%
|
|
\let\endbiography\@IEEESAVECMDendbiography%
|
|
\let\biographynophoto\@IEEESAVECMDbiographynophoto%
|
|
\let\endbiographynophoto\@IEEESAVECMDendbiographynophoto%
|
|
\let\pubid\@IEEESAVECMDpubid%
|
|
\let\pubidadjcol\@IEEESAVECMDpubidadjcol%
|
|
\let\IEEEmembership\@IEEESAVECMDIEEEmembership%
|
|
\let\IEEEaftertitletext\@IEEESAVECMDIEEEaftertitletext}
|
|
|
|
|
|
\endinput
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%% End of IEEEtran.cls %%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
% That's all folks!
|
|
|