#+TITLE: Control in a rotating frame
:DRAWER:
#+STARTUP: overview

#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="css/htmlize.css"/>
#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="css/readtheorg.css"/>
#+HTML_HEAD: <script src="js/jquery.min.js"></script>
#+HTML_HEAD: <script src="js/bootstrap.min.js"></script>
#+HTML_HEAD: <script type="text/javascript" src="js/jquery.stickytableheaders.min.js"></script>
#+HTML_HEAD: <script type="text/javascript" src="js/readtheorg.js"></script>

#+LATEX_CLASS: cleanreport
#+LaTeX_CLASS_OPTIONS: [tocnp, secbreak, minted]
#+LaTeX_HEADER: \usepackage{svg}
#+LaTeX_HEADER: \newcommand{\authorFirstName}{Thomas}
#+LaTeX_HEADER: \newcommand{\authorLastName}{Dehaeze}
#+LaTeX_HEADER: \newcommand{\authorEmail}{dehaeze.thomas@gmail.com}

#+PROPERTY: header-args:matlab  :session *MATLAB*
#+PROPERTY: header-args:matlab+ :comments org
#+PROPERTY: header-args:matlab+ :exports both
#+PROPERTY: header-args:matlab+ :eval no-export
#+PROPERTY: header-args:matlab+ :output-dir Figures
#+PROPERTY: header-args:matlab+ :mkdirp yes
:END:

* Introduction
The objective of this note it to highlight some control problems that arises when controlling the position of an object using actuators that are rotating with respect to a fixed reference frame.

In section ref:sec:system, a simple system composed of a spindle and a translation stage is defined and the equations of motion are written.
The rotation induces some coupling between the actuators and their displacement, and modifies the dynamics of the system.
This is studied using the equations, and some numerical computations are used to compare the use of voice coil and piezoelectric actuators.

Then, in section ref:sec:control_strategies, two different control approach are compared where:
- the measurement is made in the fixed frame
- the measurement is made in the rotating frame

In section ref:sec:simscape, the analytical study will be validated using a multi body model of the studied system.

Finally, in section ref:sec:control, the control strategies are implemented using Simulink and Simscape and compared.

* System Description and Analysis
  :PROPERTIES:
  :HEADER-ARGS:matlab+: :tangle system_numerical_analysis.m
  :END:
  <<sec:system>>
** System description
The system consists of one 2 degree of freedom translation stage on top of a spindle (figure ref:fig:rotating_frame_2dof).

The control inputs are the forces applied by the actuators of the translation stage ($F_u$ and $F_v$).
As the translation stage is rotating around the Z axis due to the spindle, the forces are applied along $u$ and $v$.

The measurement is either the $x-y$ displacement of the object located on top of the translation stage or the $u-v$ displacement of the sample with respect to a fixed reference frame.

#+name: fig:rotating_frame_2dof
#+caption: Schematic of the mecanical system
[[./Figures/rotating_frame_2dof.png]]

In the following block diagram:
- $G$ is the transfer function from the forces applied in the actuators to the measurement
- $K$ is the controller to design
- $J$ is a Jacobian matrix usually used to change the reference frame

Indices $x$ and $y$ corresponds to signals in the fixed reference frame (along $\vec{i}_x$ and $\vec{i}_y$):
- $D_x$ is the measured position of the sample
- $r_x$ is the reference signal which corresponds to the wanted $D_x$
- $\epsilon_x$ is the position error

Indices $u$ and $v$ corresponds to signals in the rotating reference frame ($\vec{i}_u$ and $\vec{i}_v$):
- $F_u$ and $F_v$ are forces applied by the actuators
- $\epsilon_u$ and $\epsilon_v$ are position error of the sample along $\vec{i}_u$ and $\vec{i}_v$

** Equations
  <<sec:equations>>
Based on the figure ref:fig:rotating_frame_2dof, we can write the equations of motion of the system.

Let's express the kinetic energy $T$ and the potential energy $V$ of the mass $m$:
#+name: eq:energy_inertial_frame
\begin{align}
T & = \frac{1}{2} m \left( \dot{x}^2 + \dot{y}^2 \right) \\
V & = \frac{1}{2} k \left( x^2 + y^2 \right)
\end{align}

The Lagrangian is the kinetic energy minus the potential energy.
#+name: eq:lagrangian_inertial_frame
\begin{equation}
L = T-V = \frac{1}{2} m \left( \dot{x}^2 + \dot{y}^2 \right) - \frac{1}{2} k \left( x^2 + y^2 \right)
\end{equation}


The partial derivatives of the Lagrangian with respect to the variables $(x, y)$ are:
#+name: eq:inertial_frame_deriv
\begin{align*}
\frac{\partial L}{\partial x} & = -kx \\
\frac{\partial L}{\partial y} & = -ky \\
\frac{d}{dt}\frac{\partial L}{\partial \dot{x}} & = m\ddot{x} \\
\frac{d}{dt}\frac{\partial L}{\partial \dot{y}} & = m\ddot{y}
\end{align*}

The external forces applied to the mass are:
\begin{align*}
F_{\text{ext}, x} &= F_u \cos{\theta} - F_v \sin{\theta}\\
F_{\text{ext}, y} &= F_u \sin{\theta} + F_v \cos{\theta}
\end{align*}

By appling the Lagrangian equations, we obtain:
\begin{align}
m\ddot{x} + kx = F_u \cos{\theta} - F_v \sin{\theta}\\
m\ddot{y} + ky = F_u \sin{\theta} + F_v \cos{\theta}
\end{align}

We then change coordinates from $(x, y)$ to $(d_x, d_y, \theta)$.
\begin{align*}
x & = d_u \cos{\theta} - d_v \sin{\theta}\\
y & = d_u \sin{\theta} + d_v \cos{\theta}
\end{align*}

We obtain:
\begin{align*}
\ddot{x} & = \ddot{d_u} \cos{\theta} - 2\dot{d_u}\dot{\theta}\sin{\theta} - d_u\ddot{\theta}\sin{\theta} - d_u\dot{\theta}^2 \cos{\theta}
           - \ddot{d_v} \sin{\theta} - 2\dot{d_v}\dot{\theta}\cos{\theta} - d_v\ddot{\theta}\cos{\theta} + d_v\dot{\theta}^2 \sin{\theta} \\
\ddot{y} & = \ddot{d_u} \sin{\theta} + 2\dot{d_u}\dot{\theta}\cos{\theta} + d_u\ddot{\theta}\cos{\theta} - d_u\dot{\theta}^2 \sin{\theta}
           + \ddot{d_v} \cos{\theta} - 2\dot{d_v}\dot{\theta}\sin{\theta} - d_v\ddot{\theta}\sin{\theta} - d_v\dot{\theta}^2 \cos{\theta} \\
\end{align*}

By injecting the previous result into the Lagrangian equation, we obtain:
\begin{align*}
 m \ddot{d_u} \cos{\theta} - 2m\dot{d_u}\dot{\theta}\sin{\theta} - m d_u\ddot{\theta}\sin{\theta} - m d_u\dot{\theta}^2 \cos{\theta}
-m \ddot{d_v} \sin{\theta} - 2m\dot{d_v}\dot{\theta}\cos{\theta} - m d_v\ddot{\theta}\cos{\theta} + m d_v\dot{\theta}^2 \sin{\theta}
+ k d_u \cos{\theta} - k d_v \sin{\theta} = F_u \cos{\theta} - F_v \sin{\theta} \\
  m \ddot{d_u} \sin{\theta} + 2m\dot{d_u}\dot{\theta}\cos{\theta} + m d_u\ddot{\theta}\cos{\theta} - m d_u\dot{\theta}^2 \sin{\theta}
+ m \ddot{d_v} \cos{\theta} - 2m\dot{d_v}\dot{\theta}\sin{\theta} - m d_v\ddot{\theta}\sin{\theta} - m d_v\dot{\theta}^2 \cos{\theta}
+ k d_u \sin{\theta} + k d_v \cos{\theta} = F_u \sin{\theta} + F_v \cos{\theta}
\end{align*}

Which is equivalent to:
\begin{align*}
 m \ddot{d_u} - 2m\dot{d_u}\dot{\theta}\frac{\sin{\theta}}{\cos{\theta}} - m d_u\ddot{\theta}\frac{\sin{\theta}}{\cos{\theta}} - m d_u\dot{\theta}^2
-m \ddot{d_v} \frac{\sin{\theta}}{\cos{\theta}} - 2m\dot{d_v}\dot{\theta} - m d_v\ddot{\theta} + m d_v\dot{\theta}^2 \frac{\sin{\theta}}{\cos{\theta}}
+ k d_u - k d_v \frac{\sin{\theta}}{\cos{\theta}} = F_u - F_v \frac{\sin{\theta}}{\cos{\theta}} \\
  m \ddot{d_u} + 2m\dot{d_u}\dot{\theta}\frac{\cos{\theta}}{\sin{\theta}} + m d_u\ddot{\theta}\frac{\cos{\theta}}{\sin{\theta}} - m d_u\dot{\theta}^2
+ m \ddot{d_v} \frac{\cos{\theta}}{\sin{\theta}} - 2m\dot{d_v}\dot{\theta} - m d_v\ddot{\theta} - m d_v\dot{\theta}^2 \frac{\cos{\theta}}{\sin{\theta}}
+ k d_u + k d_v \frac{\cos{\theta}}{\sin{\theta}} = F_u + F_v \frac{\cos{\theta}}{\sin{\theta}}
\end{align*}

We can then subtract and add the previous equations to obtain the following equations:
#+begin_important
#+NAME: eq:du_coupled
\begin{equation}
 m \ddot{d_u} + (k - m\dot{\theta}^2) d_u = F_u + 2 m\dot{d_v}\dot{\theta} + m d_v\ddot{\theta}
\end{equation}
#+NAME: eq:dv_coupled
\begin{equation}
 m \ddot{d_v} + (k - m\dot{\theta}^2) d_v = F_v - 2 m\dot{d_u}\dot{\theta} - m d_u\ddot{\theta}
\end{equation}
#+end_important

We obtain two differential equations that are coupled through:
- *Euler forces*: $m d_v \ddot{\theta}$
- *Coriolis forces*: $2 m \dot{d_v} \dot{\theta}$

Without the coupling terms, each equation is the equation of a one degree of freedom mass-spring system with mass $m$ and stiffness $k- m\dot{\theta}^2$.
Thus, the term $- m\dot{\theta}^2$ acts like a negative stiffness (due to *centrifugal forces*).

The forces induced by the rotating reference frame are independent of the stiffness of the actuator.
The resulting effect of those forces should then be higher when using softer actuators.

** Numerical Values for the NASS
#+begin_src matlab :exports none :results silent :noweb yes
  <<matlab-init>>
#+end_src

Let's define the parameters for the NASS.
#+begin_src matlab :exports none :results silent
  mlight = 35; % Mass for light sample [kg]
  mheavy = 85; % Mass for heavy sample [kg]

  wlight = 2*pi; % Max rot. speed for light sample [rad/s]
  wheavy = 2*pi/60; % Max rot. speed for heavy sample [rad/s]

  kvc = 1e3; % Voice Coil Stiffness [N/m]
  kpz = 1e8; % Piezo Stiffness [N/m]

  wdot = 1; % Maximum rotation acceleration [rad/s2]

  d = 0.01; % Maximum excentricity from rotational axis [m]
  ddot = 0.2; % Maximum Horizontal speed [m/s]

  save('./mat/parameters.mat');
#+end_src

#+begin_src matlab :results table :exports results
  labels = {'Light sample mass [kg]', ...
            'Heavy sample mass [kg]', ...
            'Max rot. speed - light [rpm]', ...
            'Max rot. speed - heavy [rpm]', ...
            'Voice Coil Stiffness [N/m]', ...
            'Piezo Stiffness [N/m]', ...
            'Max rot. acceleration [rad/s2]', ...
            'Max mass excentricity [m]', ...
            'Max Horizontal speed [m/s]'};
  data = [mlight, mheavy, 60*wlight/2/pi, 60*wheavy/2/pi, kvc, kpz, wdot, d, ddot];
  data2orgtable(data', labels, {}, ' %.1e ')
#+end_src

#+RESULTS:
| Light sample mass [kg]         | 3.5e+01 |
| Heavy sample mass [kg]         | 8.5e+01 |
| Max rot. speed - light [rpm]   | 6.0e+01 |
| Max rot. speed - heavy [rpm]   | 1.0e+00 |
| Voice Coil Stiffness [N/m]     | 1.0e+03 |
| Piezo Stiffness [N/m]          | 1.0e+08 |
| Max rot. acceleration [rad/s2] | 1.0e+00 |
| Max mass excentricity [m]      | 1.0e-02 |
| Max Horizontal speed [m/s]     | 2.0e-01 |

** Euler and Coriolis forces - Numerical Result
First we will determine the value for Euler and Coriolis forces during regular experiment.
- *Euler forces*: $m d_v \ddot{\theta}$
- *Coriolis forces*: $2 m \dot{d_v} \dot{\theta}$

#+begin_src matlab :exports none :results silent
  Felight = mlight*d*wdot;
  Feheavy = mheavy*d*wdot;

  Fclight = 2*mlight*ddot*wlight;
  Fcheavy = 2*mheavy*ddot*wheavy;
#+end_src

The obtained values are displayed in table ref:tab:euler_coriolis.

#+begin_src matlab :results value table :exports results :post addhdr(*this*)
  data = [Fclight, Fcheavy ;
          Felight, Feheavy];
  data2orgtable(data, {'Coriolis', 'Euler'}, {'Light', 'Heavy'}, ' %.1fN ')
#+end_src

#+NAME: tab:euler_coriolis
#+CAPTION: Euler and Coriolis forces for the NASS
#+RESULTS:
|          | Light | Heavy |
|----------+-------+-------|
| Coriolis | 88.0N | 3.6N  |
| Euler    | 0.4N  | 0.8N  |

** Negative Spring Effect - Numerical Result
The negative stiffness due to the rotation is equal to $-m{\omega_0}^2$.

#+begin_src matlab :exports none :results silent
  Klight = mlight*wlight^2;
  Kheavy = mheavy*wheavy^2;
#+end_src

The values for the negative spring effect are displayed in table ref:tab:negative_spring.

This is definitely negligible when using piezoelectric actuators. It may not be the case when using voice coil actuators.

#+begin_src matlab :results value table :exports results :post addhdr(*this*)
  data = [Klight, Kheavy];
  data2orgtable(data, {'Neg. Spring'}, {'Light', 'Heavy'}, ' %.1f[N/m] ')
#+end_src

#+NAME: tab:negative_spring
#+CAPTION: Negative Spring effect
#+RESULTS:
|             | Light       | Heavy    |
|-------------+-------------+----------|
| Neg. Spring | 1381.7[N/m] | 0.9[N/m] |

** Limitations due to coupling
To simplify, we consider a constant rotating speed $\dot{\theta} = \omega_0$ and thus $\ddot{\theta} = 0$.

From equations eqref:eq:du_coupled and eqref:eq:dv_coupled, we obtain:
\begin{align*}
  (m s^2 + (k - m{\omega_0}^2)) d_u &= F_u + 2 m {\omega_0} s d_v \\
  (m s^2 + (k - m{\omega_0}^2)) d_v &= F_v - 2 m {\omega_0} s d_u \\
\end{align*}

From second equation:
\[ d_v = \frac{1}{m s^2 + (k - m{\omega_0}^2)} F_v - \frac{2 m {\omega_0} s}{m s^2 + (k - m{\omega_0}^2)} d_u \]

And we re-inject $d_v$ into the first equation:
\begin{equation*}
(m s^2 + (k - m{\omega_0}^2)) d_u = F_u + \frac{2 m {\omega_0} s}{m s^2 + (k - m{\omega_0}^2)} F_v - \frac{(2 m {\omega_0} s)^2}{m s^2 + (k - m{\omega_0}^2)} d_u
\end{equation*}

\begin{equation*}
\frac{(m s^2 + (k - m{\omega_0}^2))^2 + (2 m {\omega_0} s)^2}{m s^2 + (k - m{\omega_0}^2)} d_u = F_u + \frac{2 m {\omega_0} s}{m s^2 + (k - m{\omega_0}^2)} F_v
\end{equation*}

Finally we obtain $d_u$ function of $F_u$ and $F_v$.
\[ d_u = \frac{m s^2 + (k - m{\omega_0}^2)}{(m s^2 + (k - m{\omega_0}^2))^2 + (2 m {\omega_0} s)^2} F_u + \frac{2 m {\omega_0} s}{(m s^2 + (k - m{\omega_0}^2))^2 + (2 m {\omega_0} s)^2} F_v \]

Similarly we can obtain $d_v$ function of $F_u$ and $F_v$:
\[ d_v = \frac{m s^2 + (k - m{\omega_0}^2)}{(m s^2 + (k - m{\omega_0}^2))^2 + (2 m {\omega_0} s)^2} F_v - \frac{2 m {\omega_0} s}{(m s^2 + (k - m{\omega_0}^2))^2 + (2 m {\omega_0} s)^2} F_u \]

The two previous equations can be written in a matrix form:
#+begin_important
#+NAME: eq:coupledplant
\begin{equation}
\begin{bmatrix} d_u \\ d_v \end{bmatrix} =
\frac{1}{(m s^2 + (k - m{\omega_0}^2))^2 + (2 m {\omega_0} s)^2}
\begin{bmatrix}
  ms^2 + (k-m{\omega_0}^2) & 2 m \omega_0 s \\
  -2 m \omega_0 s          & ms^2 + (k-m{\omega_0}^2) \\
\end{bmatrix}
\begin{bmatrix} F_u \\ F_v \end{bmatrix}
\end{equation}
#+end_important

Then, coupling is negligible if $|-m \omega^2 + (k - m{\omega_0}^2)| \gg |2 m {\omega_0} \omega|$.

*** Numerical Analysis
We plot on the same graph $\frac{|-m \omega^2 + (k - m {\omega_0}^2)|}{|2 m \omega_0 \omega|}$ for the voice coil and the piezo:
- with the light sample (figure ref:fig:coupling_light).
- with the heavy sample (figure ref:fig:coupling_heavy).

#+begin_src matlab :exports none :results silent
  f = logspace(-1, 3, 1000);

  figure;
  hold on;
  plot(f, abs(-mlight*(2*pi*f).^2 + kvc - mlight * wlight^2)./abs(2*mlight*wlight*2*pi*f), 'DisplayName', 'Voice Coil')
  plot(f, abs(-mlight*(2*pi*f).^2 + kpz - mlight * wlight^2)./abs(2*mlight*wlight*2*pi*f), 'DisplayName', 'Piezo')
  plot(f, ones(1, length(f)), 'k--', 'HandleVisibility', 'off')
  hold off;
  xlim([f(1), f(end)]);
  set(gca, 'xscale', 'log'); set(gca, 'yscale', 'log');
  xlabel('Frequency [Hz]');
  legend('Location', 'northeast');
#+end_src

#+NAME: fig:coupling_light
#+HEADER: :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="Figures/coupling_light.pdf" :var figsize="normal-normal" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:coupling_light
#+CAPTION: Relative Coupling for light mass and high rotation speed
#+RESULTS: fig:coupling_light
[[file:Figures/coupling_light.png]]
#+begin_src matlab :exports none :results silent
  figure;
  hold on;
  plot(f, abs(-mheavy*(2*pi*f).^2 + kvc - mheavy * wheavy^2)./abs(2*mheavy*wheavy*2*pi*f), 'DisplayName', 'Voice Coil')
  plot(f, abs(-mheavy*(2*pi*f).^2 + kpz - mheavy * wheavy^2)./abs(2*mheavy*wheavy*2*pi*f), 'DisplayName', 'Piezo')
  plot(f, ones(1, length(f)), 'k--', 'HandleVisibility', 'off')
  hold off;
  xlim([f(1), f(end)]);
  set(gca, 'xscale', 'log'); set(gca, 'yscale', 'log');
  xlabel('Frequency [Hz]');
  legend('Location', 'northeast');
#+end_src

#+NAME: fig:coupling_heavy
#+HEADER: :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="Figures/coupling_heavy.pdf" :var figsize="normal-normal" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:coupling_heavy
#+CAPTION: Relative Coupling for heavy mass and low rotation speed
#+RESULTS: fig:coupling_heavy
[[file:Figures/coupling_heavy.png]]

#+begin_important
Coupling is higher for actuators with small stiffness.
#+end_important

** Limitations due to negative stiffness effect
If $\max{\dot{\theta}} \ll \sqrt{\frac{k}{m}}$, then the negative spring effect is negligible and $k - m\dot{\theta}^2 \approx k$.

Let's estimate what is the maximum rotation speed for which the negative stiffness effect is still negligible ($\omega_\text{max} = 0.1 \sqrt{\frac{k}{m}}$). Results are shown table ref:tab:negative_stiffness.
#+begin_src matlab :results table :exports results :post addhdr(*this*)
  data = 0.1*60*(1/2/pi)*[sqrt(kvc/mlight), sqrt(kpz/mlight);
                       sqrt(kvc/mheavy), sqrt(kpz/mheavy)];
  data2orgtable(data, {'Light', 'Heavy'}, {'Voice Coil', 'Piezo'}, ' %.0f[rpm] ')
#+end_src

#+NAME: tab:negative_stiffness
#+CAPTION: Maximum rotation speed at which negative stiffness is negligible ($0.1\sqrt{\frac{k}{m}}$)
#+RESULTS:
|       | Voice Coil | Piezo     |
|-------+------------+-----------|
| Light | 5[rpm]     | 1614[rpm] |
| Heavy | 3[rpm]     | 1036[rpm] |

The negative spring effect is proportional to the rotational speed $\omega$.
The system dynamics will be much more affected when using soft actuator.

#+begin_important
  Negative stiffness effect has very important effect when using soft actuators.
#+end_important

The system can even goes unstable when $m \omega^2 > k$, that is when the centrifugal forces are higher than the forces due to stiffness.

From this analysis, we can determine the lowest practical stiffness that is possible to use: $k_\text{min} = 10 m \omega^2$ (table sec:tab:min_k)

#+begin_src matlab :results table :exports results :post addhdr(*this*)
  data = 10*[mlight*2*pi, mheavy*2*pi/60]
  data2orgtable(data, {'k min [N/m]'}, {'Light', 'Heavy'}, ' %.0f ')
#+end_src

#+NAME: tab:min_k
#+CAPTION: Minimum possible stiffness
#+RESULTS:
|             | Light | Heavy |
|-------------+-------+-------|
| k min [N/m] |  2199 |    89 |

** Effect of rotation speed on the plant
As shown in equation eqref:eq:coupledplant, the plant changes with the rotation speed $\omega_0$.

Then, we compute the bode plot of the direct term and coupling term for multiple rotating speed.

Then we compare the result between voice coil and piezoelectric actuators.

*** Voice coil actuator
#+begin_src matlab :exports none :results silent
  m = mlight;
  k = kvc;

  ws = linspace(0, 2*pi, 5); % Rotation speed vector [rad/s]

  Gs = {zeros(1, length(ws))};
  Gcs = {zeros(1, length(ws))};

  for i = 1:length(ws)
    w = ws(i);
    Gs(i) = {(m*s^2 + (k-m*w^2))/((m*s^2 + (k - m*w^2))^2 + (2*m*w*s)^2)};
    Gcs(i) = {(2*m*w*s)/((m*s^2 + (k - m*w^2))^2 + (2*m*w*s)^2)};
  end
#+end_src

#+begin_src matlab :exports none :results silent
  freqs = logspace(-2, 1, 1000);

  figure;
  ax1 = subaxis(2,1,1);
  hold on;
  for i = 1:length(ws)
    plot(freqs, abs(squeeze(freqresp(Gs{i}, freqs, 'Hz'))));
  end
  hold off;
  xlim([freqs(1), freqs(end)]);
  set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
  set(gca, 'XTickLabel',[]);
  ylabel('Magnitude [m/N]');

  ax2 = subaxis(2,1,2);
  hold on;
  for i = 1:length(ws)
    plot(freqs, 180/pi*angle(squeeze(freqresp(Gs{i}, freqs, 'Hz'))), 'DisplayName', sprintf('w = %.0f [rpm]', ws(i)*60/2/pi));
  end
  hold off;
  yticks(-180:90:180);
  ylim([-180 180]);
  xlim([freqs(1), freqs(end)]);
  set(gca, 'XScale', 'log'); set(gca, 'YScale', 'lin');
  xlabel('Frequency [Hz]'); ylabel('Phase [deg]');
  legend('Location', 'southwest');
  linkaxes([ax1,ax2],'x');
#+end_src

#+NAME: fig:G_ws_vc
#+HEADER: :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="Figures/G_ws_vc.pdf" :var figsize="wide-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
  #+end_src

#+LABEL: fig:G_ws_vc
#+CAPTION: Bode plot of the direct transfer function term (from $F_u$ to $D_u$) for multiple rotation speed - Voice coil
#+RESULTS: fig:G_ws_vc
[[file:Figures/G_ws_vc.png]]


#+begin_src matlab :exports none :results silent
  freqs = logspace(-2, 1, 1000);

  figure;
  ax1 = subaxis(2,1,1);
  hold on;
  for i = 1:length(ws)
    plot(freqs, abs(squeeze(freqresp(Gcs{i}, freqs, 'Hz'))));
  end
  hold off;
  xlim([freqs(1), freqs(end)]);
  set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
  set(gca, 'XTickLabel',[]);
  ylabel('Magnitude [m/N]');

  ax2 = subaxis(2,1,2);
  hold on;
  for i = 1:length(ws)
    plot(freqs, 180/pi*angle(squeeze(freqresp(Gcs{i}, freqs, 'Hz'))), 'DisplayName', sprintf('w = %.0f [rpm]', ws(i)*60/2/pi));
  end
  hold off;
  yticks(-180:90:180);
  ylim([-180 180]);
  xlim([freqs(1), freqs(end)]);
  set(gca, 'XScale', 'log'); set(gca, 'YScale', 'lin');
  xlabel('Frequency [Hz]'); ylabel('Phase [deg]');
  legend('Location', 'southwest');
  linkaxes([ax1,ax2],'x');
#+end_src

#+NAME: fig:Gc_ws_vc
#+HEADER: :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="Figures/Gc_ws_vc.pdf" :var figsize="wide-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:Gc_ws_vc
#+CAPTION: caption
#+RESULTS: fig:Gc_ws_vc
[[file:Figures/Gc_ws_vc.png]]

*** Piezoelectric actuator
#+begin_src matlab :exports none :results silent
  m = mlight;
  k = kpz;

  ws = linspace(0, 2*pi, 5); % Rotation speed vector [rad/s]

  Gs = {zeros(1, length(ws))};
  Gcs = {zeros(1, length(ws))};

  for i = 1:length(ws)
    w = ws(i);
    Gs(i) = {(m*s^2 + (k-m*w^2))/((m*s^2 + (k - m*w^2))^2 + (2*m*w*s)^2)};
    Gcs(i) = {(2*m*w*s)/((m*s^2 + (k - m*w^2))^2 + (2*m*w*s)^2)};
  end
#+end_src

#+begin_src matlab :exports none :results silent
  freqs = logspace(2, 3, 1000);

  figure;
  ax1 = subaxis(2,1,1);
  hold on;
  for i = 1:length(ws)
    plot(freqs, abs(squeeze(freqresp(Gs{i}, freqs, 'Hz'))));
  end
  hold off;
  xlim([freqs(1), freqs(end)]);
  set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
  set(gca, 'XTickLabel',[]);
  ylabel('Magnitude [m/N]');

  ax2 = subaxis(2,1,2);
  hold on;
  for i = 1:length(ws)
    plot(freqs, 180/pi*angle(squeeze(freqresp(Gs{i}, freqs, 'Hz'))), 'DisplayName', sprintf('w = %.0f [rpm]', ws(i)*60/2/pi));
  end
  hold off;
  yticks(-180:90:180);
  ylim([-180 180]);
  xlim([freqs(1), freqs(end)]);
  set(gca, 'XScale', 'log'); set(gca, 'YScale', 'lin');
  xlabel('Frequency [Hz]'); ylabel('Phase [deg]');
  legend('Location', 'southwest');
  linkaxes([ax1,ax2],'x');
#+end_src

#+NAME: fig:G_ws_pz
#+HEADER: :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="Figures/G_ws_pz.pdf" :var figsize="wide-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:G_ws_pz
#+CAPTION: Bode plot of the direct transfer function term (from $F_u$ to $D_u$) for multiple rotation speed - Piezoelectric actuator
#+RESULTS: fig:G_ws_pz
[[file:Figures/G_ws_pz.png]]

#+begin_src matlab :exports none :results silent
  figure;
  ax1 = subaxis(2,1,1);
  hold on;
  for i = 1:length(ws)
    plot(freqs, abs(squeeze(freqresp(Gcs{i}, freqs, 'Hz'))));
  end
  hold off;
  xlim([freqs(1), freqs(end)]);
  set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
  set(gca, 'XTickLabel',[]);
  ylabel('Magnitude [m/N]');

  ax2 = subaxis(2,1,2);
  hold on;
  for i = 1:length(ws)
    plot(freqs, 180/pi*angle(squeeze(freqresp(Gcs{i}, freqs, 'Hz'))), 'DisplayName', sprintf('w = %.0f [rpm]', ws(i)*60/2/pi));
  end
  hold off;
  yticks(-180:90:180);
  ylim([-180 180]);
  xlim([freqs(1), freqs(end)]);
  set(gca, 'XScale', 'log'); set(gca, 'YScale', 'lin');
  xlabel('Frequency [Hz]'); ylabel('Phase [deg]');
  legend('Location', 'southwest');
  linkaxes([ax1,ax2],'x');
#+end_src

#+NAME: fig:Gc_ws_pz
#+HEADER: :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="Figures/Gc_ws_pz.pdf" :var figsize="wide-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:Gc_ws_pz
#+CAPTION: Bode plot of the coupling transfer function term (from $F_u$ to $D_v$) for multiple rotation speed - Piezoelectric actuator
#+RESULTS: fig:Gc_ws_pz
[[file:Figures/Gc_ws_pz.png]]

*** Analysis
When the rotation speed is null, the coupling terms are equal to zero and the diagonal terms corresponds to one degree of freedom mass spring system.

When the rotation speed in not null, the resonance frequency is duplicated into two pairs of complex conjugate poles.

As the rotation speed increases, one of the two resonant frequency goes to lower frequencies as the other one goes to higher frequencies.

The poles of the coupling terms are the same as the poles of the diagonal terms. The magnitude of the coupling terms are increasing with the rotation speed.

#+begin_important
As shown in the previous figures, the system with voice coil is much more sensitive to rotation speed.
#+end_important

*** Campbell diagram
The poles of the system are computed for multiple values of the rotation frequency. To simplify the computation of the poles, we add some damping to the system.

#+begin_src matlab :results silent :exports code
  m = mlight;
  k = kvc;
  c = 0.1*sqrt(k*m);

  wsvc = linspace(0, 10, 100); % [rad/s]

  polesvc = zeros(2, length(wsvc));

  for i = 1:length(wsvc)
    polei = pole(1/((m*s^2 + c*s + (k - m*wsvc(i)^2))^2 + (2*m*wsvc(i)*s)^2));
    polesvc(:, i) = sort(polei(imag(polei) > 0));
  end
#+end_src

#+begin_src matlab :results silent :exports code
  m = mlight;
  k = kpz;
  c = 0.1*sqrt(k*m);

  wspz = linspace(0, 1000, 100); % [rad/s]

  polespz = zeros(2, length(wspz));

  for i = 1:length(wspz)
    polei = pole(1/((m*s^2 + c*s + (k - m*wspz(i)^2))^2 + (2*m*wspz(i)*s)^2));
    polespz(:, i) = sort(polei(imag(polei) > 0));
  end
#+end_src

We then plot the real and imaginary part of the poles as a function of the rotation frequency (figures ref:fig:poles_w_vc and ref:fig:poles_w_pz).

When the real part of one pole becomes positive, the system goes unstable.

For the voice coil (figure ref:fig:poles_w_vc), the system is unstable when the rotation speed is above 5 rad/s. The real and imaginary part of the poles of the system with piezoelectric actuators are changing much less (figure ref:fig:poles_w_pz).

#+begin_src matlab :results silent :exports none
  figure;
  % Amplitude
  ax1 = subplot(1,2,1);
  hold on;
  plot(wsvc, real(polesvc(1, :)))
  set(gca,'ColorOrderIndex',1)
  plot(wsvc, real(polesvc(2, :)))
  plot(wsvc, zeros(size(wsvc)), 'k--')
  hold off;
  xlabel('Rotation Frequency [rad/s]');
  ylabel('Pole Real Part');
  ax2 = subplot(1,2,2);
  hold on;
  plot(wsvc, imag(polesvc(1, :)))
  set(gca,'ColorOrderIndex',1)
  plot(wsvc, -imag(polesvc(1, :)))
  set(gca,'ColorOrderIndex',1)
  plot(wsvc, imag(polesvc(2, :)))
  set(gca,'ColorOrderIndex',1)
  plot(wsvc, -imag(polesvc(2, :)))
  hold off;
  xlabel('Rotation Frequency [rad/s]');
  ylabel('Pole Imaginary Part');
#+end_src

#+NAME: fig:poles_w_vc
#+HEADER: :tangle no :exports results :results raw :noweb yes  :mkdirp yes
#+begin_src matlab :var filepath="Figures/poles_w_vc.pdf" :var figsize="wide-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:poles_w_vc
#+CAPTION: Real and Imaginary part of the poles of the system as a function of the rotation speed - Voice Coil and light sample
#+RESULTS: fig:poles_w_vc
[[file:Figures/poles_w_vc.png]]


#+begin_src matlab :results silent :exports none
  figure;
  % Amplitude
  ax1 = subplot(1,2,1);
  hold on;
  plot(wspz, real(polespz(1, :)))
  set(gca,'ColorOrderIndex',1)
  plot(wspz, real(polespz(2, :)))
  plot(wspz, zeros(size(wspz)), 'k--')
  hold off;
  xlabel('Rotation Frequency [rad/s]');
  ylabel('Pole Real Part');
  ax2 = subplot(1,2,2);
  hold on;
  plot(wspz, imag(polespz(1, :)))
  set(gca,'ColorOrderIndex',1)
  plot(wspz, -imag(polespz(1, :)))
  set(gca,'ColorOrderIndex',1)
  plot(wspz, imag(polespz(2, :)))
  set(gca,'ColorOrderIndex',1)
  plot(wspz, -imag(polespz(2, :)))
  hold off;
  xlabel('Rotation Frequency [rad/s]');
  ylabel('Pole Imaginary Part');
#+end_src

#+NAME: fig:poles_w_pz
#+HEADER: :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="Figures/poles_w_pz.pdf" :var figsize="wide-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:poles_w_pz
#+CAPTION: Real and Imaginary part of the poles of the system as a function of the rotation speed - Piezoelectric actuator and light sample
#+RESULTS: fig:poles_w_pz
[[file:Figures/poles_w_pz.png]]

* Control Strategies
  <<sec:control_strategies>>
** Measurement in the fixed reference frame
First, let's consider a measurement in the fixed referenced frame.

The transfer function from actuator $[F_u, F_v]$ to sensor $[D_x, D_y]$ is then $G(\theta)$.

Then the measurement is subtracted to the reference signal $[r_x, r_y]$ to obtain the position error in the fixed reference frame $[\epsilon_x, \epsilon_y]$.

The position error $[\epsilon_x, \epsilon_y]$ is then express in the rotating frame corresponding to the actuators $[\epsilon_u, \epsilon_v]$.

Finally, the control low $K$ links the position errors $[\epsilon_u, \epsilon_v]$ to the actuator forces $[F_u, F_v]$.

The block diagram is shown on figure ref:fig:control_measure_fixed_2dof.

#+name: fig:control_measure_fixed_2dof
#+caption: Control with a measure from fixed frame
[[./Figures/control_measure_fixed_2dof.png]]

The loop gain is then $L = G(\theta) K J(\theta)$.

One question we wish to answer is: is $G(\theta) J(\theta) = G(\theta_0) J(\theta_0)$?

** Measurement in the rotating frame
Let's consider that the measurement is made in the rotating reference frame.

The corresponding block diagram is shown figure ref:fig:control_measure_rotating_2dof

#+name: fig:control_measure_rotating_2dof
#+caption: Control with a measure from rotating frame
[[./Figures/control_measure_rotating_2dof.png]]

The loop gain is $L = G K$.

* Multi Body Model - Simscape
  :PROPERTIES:
  :HEADER-ARGS:matlab+: :tangle simscape_analysis.m
  :END:
  <<sec:simscape>>

** Initialization
#+begin_src matlab :exports none :results silent :noweb yes
  <<matlab-init>>

  load('./mat/parameters.mat');

  bode_opts = bodeoptions;
  bode_opts.FreqUnits = 'Hz';
  bode_opts.MagUnits  = 'abs';
  bode_opts.MagScale  = 'log';
  bode_opts.Grid      = 'on';
  bode_opts.PhaseVisible = 'off';
  bode_opts.Title.FontSize     = 10;
  bode_opts.XLabel.FontSize    = 10;
  bode_opts.YLabel.FontSize    = 10;
  bode_opts.TickLabel.FontSize = 10;
#+end_src

#+begin_src matlab :exports none :results silent
  open rotating_frame.slx
#+end_src

First we define the parameters that must be defined in order to run the Simscape simulation.
#+begin_src matlab :exports code :results silent
  w = 2*pi; % Rotation speed [rad/s]

  theta_e = 0; % Static measurement error on the angle theta [rad]

  m = 5; % mass of the sample [kg]

  mTuv = 30;% Mass of the moving part of the Tuv stage [kg]
  kTuv = 1e8; % Stiffness of the Tuv stage [N/m]
  cTuv = 0; % Damping of the Tuv stage [N/(m/s)]
#+end_src

Then, we defined parameters that will be used in the following analysis.
#+begin_src matlab :exports code :results silent
  mlight = 5; % Mass for light sample [kg]
  mheavy = 55; % Mass for heavy sample [kg]

  wlight = 2*pi; % Max rot. speed for light sample [rad/s]
  wheavy = 2*pi/60; % Max rot. speed for heavy sample [rad/s]

  kvc = 1e3; % Voice Coil Stiffness [N/m]
  kpz = 1e8; % Piezo Stiffness [N/m]

  d = 0.01; % Maximum excentricity from rotational axis [m]

  freqs = logspace(-2, 3, 1000); % Frequency vector for analysis [Hz]
#+end_src

** Identification in the rotating referenced frame
We initialize the inputs and outputs of the system to identify:
- Inputs: $f_u$ and $f_v$
- Outputs: $d_u$ and $d_v$

#+begin_src matlab :exports code :results silent
  %% Options for Linearized
  options = linearizeOptions;
  options.SampleTime = 0;

  %% Name of the Simulink File
  mdl = 'rotating_frame';

  %% Input/Output definition
  io(1) = linio([mdl, '/fu'], 1, 'input');
  io(2) = linio([mdl, '/fv'], 1, 'input');

  io(3) = linio([mdl, '/du'], 1, 'output');
  io(4) = linio([mdl, '/dv'], 1, 'output');
#+end_src

We start we identify the transfer functions at high speed with the light sample.
#+begin_src matlab :exports code :results silent
  w = wlight; % Rotation speed [rad/s]
  m = mlight; % mass of the sample [kg]

  kTuv = kpz;
  Gpz_light = linearize(mdl, io, 0.1);
  Gpz_light.InputName  = {'Fu', 'Fv'};
  Gpz_light.OutputName = {'Du', 'Dv'};

  kTuv = kvc;
  Gvc_light = linearize(mdl, io, 0.1);
  Gvc_light.InputName  = {'Fu', 'Fv'};
  Gvc_light.OutputName = {'Du', 'Dv'};
#+end_src

Then we identify the system with an heavy mass and low speed.
#+begin_src matlab :exports code :results silent
  w = wheavy; % Rotation speed [rad/s]
  m = mheavy; % mass of the sample [kg]

  kTuv = kpz;
  Gpz_heavy = linearize(mdl, io, 0.1);
  Gpz_heavy.InputName  = {'Fu', 'Fv'};
  Gpz_heavy.OutputName = {'Du', 'Dv'};

  kTuv = kvc;
  Gvc_heavy = linearize(mdl, io, 0.1);
  Gvc_heavy.InputName  = {'Fu', 'Fv'};
  Gvc_heavy.OutputName = {'Du', 'Dv'};
#+end_src

** Coupling ratio between $f_{uv}$ and $d_{uv}$
In order to validate the equations written, we can compute the coupling ratio using the simscape model and compare with the equations.

From the previous identification, we plot the coupling ratio in both case (figure ref:fig:coupling_ratio_light_heavy).

We obtain the same result than the analytical case (figures ref:fig:coupling_light and ref:fig:coupling_heavy).
#+begin_src matlab :results silent :exports none
  figure;
  hold on;
  plot(freqs, abs(squeeze(freqresp(Gvc_light('Du', 'Fu'), freqs, 'Hz')))./abs(squeeze(freqresp(Gvc_light('Dv', 'Fu'), freqs, 'Hz'))));
  plot(freqs, abs(squeeze(freqresp(Gpz_light('Du', 'Fu'), freqs, 'Hz')))./abs(squeeze(freqresp(Gpz_light('Dv', 'Fu'), freqs, 'Hz'))));
  set(gca,'ColorOrderIndex',1);
  plot(freqs, abs(squeeze(freqresp(Gvc_heavy('Du', 'Fu'), freqs, 'Hz')))./abs(squeeze(freqresp(Gvc_heavy('Dv', 'Fu'), freqs, 'Hz'))), '--');
  plot(freqs, abs(squeeze(freqresp(Gpz_heavy('Du', 'Fu'), freqs, 'Hz')))./abs(squeeze(freqresp(Gpz_heavy('Dv', 'Fu'), freqs, 'Hz'))), '--');
  hold off;
  xlim([freqs(1), freqs(end)]);
  set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
  xlabel('Frequency [Hz]'); ylabel('Coupling ratio');
  legend({'light - VC', 'light - PZ', 'heavy - VC',  'heavy - PZ'}, 'Location', 'northeast')
#+end_src

#+NAME: fig:coupling_ratio_light_heavy
#+HEADER: :tangle no :exports results :results raw :noweb yes  :mkdirp yes
#+begin_src matlab :var filepath="Figures/coupling_ratio_light_heavy.pdf" :var figsize="wide-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:coupling_ratio_light_heavy
#+CAPTION: Coupling ratio obtained with the Simscape model
#+RESULTS: fig:coupling_ratio_light_heavy
[[file:Figures/coupling_ratio_light_heavy.png]]

** Plant Control - SISO approach
*** Plant identification
The goal is to study the control problems due to the coupling that appears because of the rotation.

#+begin_src matlab :exports none :results silent
  %% Options for Linearized
  options = linearizeOptions;
  options.SampleTime = 0;

  %% Name of the Simulink File
  mdl = 'rotating_frame';

  %% Input/Output definition
  io(1) = linio([mdl, '/fu'], 1, 'input');
  io(2) = linio([mdl, '/fv'], 1, 'input');

  io(3) = linio([mdl, '/du'], 1, 'output');
  io(4) = linio([mdl, '/dv'], 1, 'output');
#+end_src

First, we identify the system when the rotation speed is null and then when the rotation speed is equal to 60rpm.

The actuators are voice coil with some damping added.

The bode plot of the system not rotating and rotating at 60rpm is shown figure ref:fig:Gvc_speed.

#+begin_src matlab :exports none :results silent
  w = 0; % Rotation speed [rad/s]
  m = mlight; % mass of the sample [kg]
  kTuv = kvc;
  cTuv = 0.1*sqrt(kTuv*m);

  Gvc = linearize(mdl, io, 0.1);
  Gvc.InputName  = {'Fu', 'Fv'};
  Gvc.OutputName = {'Du', 'Dv'};
#+end_src

#+begin_src matlab :exports none :results silent
  w = wlight; % Rotation speed [rad/s]
  m = mlight; % mass of the sample [kg]
  kTuv = kvc;
  cTuv = 0.1*sqrt(kTuv*m);

  Gtvc = linearize(mdl, io, 0.1);
  Gtvc.InputName  = {'Fu', 'Fv'};
  Gtvc.OutputName = {'Du', 'Dv'};
#+end_src

#+begin_src matlab :exports none :results silent
  figure;
  bode(Gvc, Gtvc, bode_opts)
  legend({'Gvc - $\omega = 0$', 'Gvc - $\omega = 60$rpm'}, 'Location', 'southwest');
  title('');
#+end_src

#+NAME: fig:Gvc_speed
#+HEADER: :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="Figures/Gvc_speed.pdf" :var figsize="wide-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:Gvc_speed
#+CAPTION: Change of transfer functions due to rotating speed
#+RESULTS: fig:Gvc_speed
[[file:Figures/Gvc_speed.png]]

*** Effect of rotation speed
We first identify the system (voice coil and light mass) for multiple rotation speed.
Then we compute the bode plot of the diagonal element (figure ref:fig:Guu_ws) and of the coupling element (figure ref:fig:Guv_ws).

As the rotation frequency increases:
- one pole goes to lower frequencies while the other goes to higher frequencies
- one zero appears between the two poles
- the zero disappears when $\omega > \sqrt{\frac{k}{m}}$ and the low frequency pole becomes unstable (positive real part)

To stabilize the unstable pole, we need a control bandwidth of at least twice of frequency of the unstable pole.

#+begin_src matlab :exports none :results silent
  ws = linspace(0, 2*pi, 5); % Rotation speed vector [rad/s]
  m = mlight; % mass of the sample [kg]

  kTuv = kvc;
  cTuv = 0.1*sqrt(kTuv*m);

  Gs = {zeros(1, length(ws))};

  for i = 1:length(ws)
    w = ws(i);
    Gs{i} = linearize(mdl, io, 0.1);
  end
#+end_src

#+begin_src matlab :exports none :results silent
  freqs = logspace(-2, 2, 1000);

  figure;
  ax1 = subaxis(2,1,1);
  hold on;
  for i = 1:length(ws)
    plot(freqs, abs(squeeze(freqresp(Gs{i}(1, 1), freqs, 'Hz'))));
  end
  hold off;
  xlim([freqs(1), freqs(end)]);
  set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
  set(gca, 'XTickLabel',[]);
  ylabel('Magnitude [m/N]');

  ax2 = subaxis(2,1,2);
  hold on;
  for i = 1:length(ws)
    plot(freqs, 180/pi*angle(squeeze(freqresp(Gs{i}(1, 1), freqs, 'Hz'))), 'DisplayName', sprintf('w = %.0f [rpm]', ws(i)*60/2/pi));
  end
  hold off;
  yticks(-180:90:180);
  ylim([-180 180]);
  xlim([freqs(1), freqs(end)]);
  set(gca, 'XScale', 'log'); set(gca, 'YScale', 'lin');
  xlabel('Frequency [Hz]'); ylabel('Phase [deg]');
  legend('Location', 'northeast');
  linkaxes([ax1,ax2],'x');
#+end_src

#+NAME: fig:Guu_ws
#+HEADER: :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="Figures/Guu_ws.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:Guu_ws
#+CAPTION: Diagonal term as a function of the rotation frequency
#+RESULTS: fig:Guu_ws
[[file:Figures/Guu_ws.png]]


#+begin_src matlab :exports none :results silent
  freqs = logspace(-2, 2, 1000);

  figure;
  ax1 = subaxis(2,1,1);
  hold on;
  for i = 1:length(ws)
    plot(freqs, abs(squeeze(freqresp(Gs{i}(1, 2), freqs, 'Hz'))));
  end
  hold off;
  xlim([freqs(1), freqs(end)]);
  set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
  set(gca, 'XTickLabel',[]);
  ylabel('Magnitude [m/N]');

  ax2 = subaxis(2,1,2);
  hold on;
  for i = 1:length(ws)
    plot(freqs, 180/pi*angle(squeeze(freqresp(Gs{i}(1, 2), freqs, 'Hz'))), 'DisplayName', sprintf('w = %.0f [rpm]', ws(i)*60/2/pi));
  end
  hold off;
  yticks(-180:90:180);
  ylim([-180 180]);
  xlim([freqs(1), freqs(end)]);
  set(gca, 'XScale', 'log'); set(gca, 'YScale', 'lin');
  xlabel('Frequency [Hz]'); ylabel('Phase [deg]');
  legend('Location', 'northeast');
  linkaxes([ax1,ax2],'x');
#+end_src

#+NAME: fig:Guv_ws
#+HEADER: :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="Figures/Guv_ws.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:Guv_ws
#+CAPTION: Couplin term as a function of the rotation frequency
#+RESULTS: fig:Guv_ws
[[file:Figures/Guv_ws.png]]

Then, we can look at the same plots for the piezoelectric actuator (figure ref:fig:Guu_ws_pz). The effect of the rotation frequency has very little effect on the dynamics of the system to control.

#+begin_src matlab :exports none :results silent
  ws = linspace(0, 2*pi, 5); % Rotation speed vector [rad/s]
  m = mlight; % mass of the sample [kg]

  kTuv = kpz;
  cTuv = 0.1*sqrt(kTuv*m);

  Gs = {zeros(1, length(ws))};

  for i = 1:length(ws)
    w = ws(i);
    Gs{i} = linearize(mdl, io, 0.1);
  end
#+end_src

#+begin_src matlab :exports none :results silent
  freqs = logspace(2, 3, 1000);

  figure;
  ax1 = subaxis(2,1,1);
  hold on;
  for i = 1:length(ws)
    plot(freqs, abs(squeeze(freqresp(Gs{i}(1, 1), freqs, 'Hz'))));
  end
  hold off;
  xlim([freqs(1), freqs(end)]);
  set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
  set(gca, 'XTickLabel',[]);
  ylabel('Magnitude [m/N]');

  ax2 = subaxis(2,1,2);
  hold on;
  for i = 1:length(ws)
    plot(freqs, 180/pi*angle(squeeze(freqresp(Gs{i}(1, 1), freqs, 'Hz'))), 'DisplayName', sprintf('w = %.0f [rpm]', ws(i)*60/2/pi));
  end
  hold off;
  yticks(-180:90:180);
  ylim([-180 180]);
  xlim([freqs(1), freqs(end)]);
  set(gca, 'XScale', 'log'); set(gca, 'YScale', 'lin');
  xlabel('Frequency [Hz]'); ylabel('Phase [deg]');
  legend('Location', 'northeast');
  linkaxes([ax1,ax2],'x');
#+end_src

#+NAME: fig:Guu_ws_pz
#+HEADER: :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="Figures/Guu_ws_pz.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:Guu_ws_pz
#+CAPTION: Diagonal term as a function of the rotation frequency
#+RESULTS: fig:Guu_ws_pz
[[file:Figures/Guu_ws_pz.png]]

*** Controller design
We design a controller based on the identification when the system is not rotating.

The obtained controller is a lead-lag controller with the following transfer function.
#+begin_src matlab :results none :exports code
  Kll = 2.0698e09*(s+40.45)*(s+1.181)/((s+0.01)*(s+198.4)*(s+2790));
  K = [Kll 0;
       0   Kll];
#+end_src

The loop gain is displayed figure ref:fig:Gvc_loop_gain.

#+begin_src matlab :exports none :results silent
  freqs = logspace(-2, 2, 1000);

  figure;
  % Amplitude
  ax1 = subaxis(2,1,1);
  hold on;
  plot(freqs, abs(squeeze(freqresp(Gvc('Du', 'fu')*Kll, freqs, 'Hz'))), '-');
  set(gca,'xscale','log'); set(gca,'yscale','log');
  ylabel('Amplitude [m/N]');
  set(gca, 'XTickLabel',[]);
  hold off;
  % Phase
  ax2 = subaxis(2,1,2);
  hold on;
  plot(freqs, 180/pi*unwrap(angle(squeeze(freqresp(Gvc('Du', 'fu')*Kll, freqs, 'Hz')))), '-');
  set(gca,'xscale','log');
  yticks(-180:180:180);
  ylim([-180 180]);
  xlabel('Frequency [Hz]'); ylabel('Phase [deg]');
  hold off;
  linkaxes([ax1,ax2],'x');
#+end_src

#+NAME: fig:Gvc_loop_gain
#+HEADER: :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="Figures/Gvc_loop_gain.pdf" :var figsize="wide-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:Gvc_loop_gain
#+CAPTION: Loop gain obtained for a lead-lag controller on the system with a voice coil
#+RESULTS: fig:Gvc_loop_gain
[[file:Figures/Gvc_loop_gain.png]]

*** Controlling the rotating system
We here want to see if the system is robust with respect to the rotation speed. We then use the controller based on the non-rotating system, and see if the system is stable and its dynamics.

We can then plot the same loop gain with the rotating system using the same controller (figure ref:fig:Gtvc_loop_gain). The result obtained is unstable.

#+begin_src matlab :exports none :results silent
  freqs = logspace(-2, 2, 1000);

  figure;
  % Amplitude
  ax1 = subaxis(2,1,1);
  hold on;
  plot(freqs, abs(squeeze(freqresp(Gtvc('Du', 'fu')*Kll, freqs, 'Hz'))), '-');
  set(gca,'xscale','log'); set(gca,'yscale','log');
  ylabel('Amplitude [m/N]');
  set(gca, 'XTickLabel',[]);
  hold off;
  % Phase
  ax2 = subaxis(2,1,2);
  hold on;
  plot(freqs, 180/pi*angle(squeeze(freqresp(Gtvc('Du', 'fu')*Kll, freqs, 'Hz'))), '-');
  set(gca,'xscale','log');
  yticks(-180:180:180);
  ylim([-180 180]);
  xlabel('Frequency [Hz]'); ylabel('Phase [deg]');
  hold off;
  linkaxes([ax1,ax2],'x');
#+end_src

#+NAME: fig:Gtvc_loop_gain
#+HEADER: :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="Figures/Gtvc_loop_gain.pdf" :var figsize="wide-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:Gtvc_loop_gain
#+CAPTION: Loop gain with the rotating system
#+RESULTS: fig:Gtvc_loop_gain
[[file:Figures/Gtvc_loop_gain.png]]

We can look at the poles of the system where we control only one direction ($u$ for instance). We obtain a pole with a positive real part.

#+begin_important
  The system is then unstable when controlling only one direction.
#+end_important

#+begin_src matlab :results table :exports both
  pole(feedback(Gtvc, blkdiag(Kll, 0)))
#+end_src

#+RESULTS:
|           -2798 |
| -58.916+94.248i |
| -58.916-94.248i |
|         -71.644 |
|          3.1647 |
|         -3.3034 |
|         -1.1901 |

However, when we look at the poles of the closed loop with a diagonal controller, all the poles have negative real part and the system is stable.
#+begin_src matlab :results table :exports both
  pole(feedback(Gtvc, blkdiag(Kll, Kll)))
#+end_src

#+RESULTS:
| -2798+0.035765i    |
| -2798-0.035765i    |
| -56.414+105.34i    |
| -56.414-105.34i    |
| -64.495+79.314i    |
| -64.495-79.314i    |
| -68.509+13.499i    |
| -68.509-13.499i    |
| -1.1837+0.0041422i |
| -1.1837-0.0041422i |

Check stability of MIMO system.
#+begin_src matlab :result silent
  isstable(1/(1+K*Gtvc))
  isstable(Gtvc/(1+K*Gtvc))
  isstable(Gtvc/(1+K*Gtvc))
#+end_src

#+RESULTS:
: 0

*** Close loop performance
First, we create the closed loop systems. Then, we plot the transfer function from the reference signals $[\epsilon_u, \epsilon_v]$ to the output $[d_u, d_v]$ (figure ref:fig:perfcomp).

#+begin_src matlab :results none :exports code
  S  = eye(2)/(eye(2) + Gvc*K);
  T  = Gvc*K /(eye(2) + Gvc*K);

  St = eye(2)/(eye(2) + Gtvc*K);
  Tt = Gtvc*K/(eye(2) + Gtvc*K);

  freqs = logspace(-3, 3, 1000);
#+end_src

#+begin_src matlab :results none :exports code
  figure;
  bode(S, St, 2*pi*freqs, bode_opts)
#+end_src

#+begin_src matlab :results none :exports code
  figure;
  bode(T, Tt, 2*pi*freqs, bode_opts)
#+end_src

#+begin_src matlab :results none :exports code
  freqs = logspace(-2, 2, 1000);

  figure;
  ax1 = subplot(1,2,1);
  hold on;
  plot(freqs, abs(squeeze(freqresp(Tvc(1, 1), freqs, 'Hz'))));
  plot(freqs, abs(squeeze(freqresp(Ttvc(1, 1), freqs, 'Hz'))));
  hold off;
  xlim([freqs(1), freqs(end)]);
  set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
  xlabel('Frequency [Hz]'); ylabel('Magnitude [m/N]');
  legend({'w = 0 [rpm]', 'w = 60 [rpm]'}, 'Location', 'southwest')
  title('$G_{r_u \to d_u}$')

  ax2 = subplot(1,2,2);
  hold on;
  plot(freqs, abs(squeeze(freqresp(Tvc(1, 2), freqs, 'Hz'))));
  plot(freqs, abs(squeeze(freqresp(Ttvc(1, 2), freqs, 'Hz'))));
  hold off;
  xlim([freqs(1), freqs(end)]);
  ylim([1e-5, 1]);
  set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
  xlabel('Frequency [Hz]');
  title('$G_{r_u \to d_v}$')

  linkaxes([ax1,ax2],'x');
#+end_src

#+NAME: fig:perfconp
#+HEADER: :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="Figures/perfconp.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:perfconp
#+CAPTION: Close loop performance for $\omega = 0$ and $\omega = 60 rpm$
#+RESULTS: fig:perfconp
[[file:Figures/perfconp.png]]

** Plant Control - MIMO approach
*** TODO Analysis - SVD
\[ G = U \Sigma V^H \]

With:
- $\Sigma$ is an $2 \times 2$ matrix with 2 non-negative *singular values* $\sigma_i$, arranged in descending order along its main diagonal
- $U$ is an $2 \times 2$ unitary matrix. The columns vectors of $U$, denoted $u_i$, represent the *output directions* of the plant. They are orthonomal
- $V$ is an $2 \times 2$ unitary matrix. The columns vectors of $V$, denoted $v_i$, represent the *input directions* of the plant. They are orthonomal

We first look at the evolution of the singular values as a function of frequency (figure ref:fig:G_sigma).
#+begin_src matlab :exports none :results silent
  ws = linspace(0, 2*pi, 5); % Rotation speed vector [rad/s]
  m = mlight; % mass of the sample [kg]

  kTuv = kvc;
  cTuv = 0.1*sqrt(kTuv*m);

  Gs = {zeros(1, length(ws))};

  for i = 1:length(ws)
    w = ws(i);
    Gs{i} = linearize(mdl, io, 0.1);
  end
#+end_src

#+begin_src matlab :results silent :exports none
  freqs = logspace(-2, 2, 1000);

  figure;
  hold on;
  for i = 1:length(ws)
    plot(freqs, abs(squeeze(freqresp(Gs{i}(1,1), freqs, 'Hz'))), '-');
  end
  hold off;
  set(gca,'xscale','log'); set(gca,'yscale','log');
#+end_src

#+begin_src matlab :results silent :exports none
  freqs = logspace(-2, 1, 1000);

  figure;
  hold on;
  for i = 1:length(ws)
    sv = sigma(Gs{i}, 2*pi*freqs);
    set(gca,'ColorOrderIndex',i)
    plot(freqs, sv(1, :), 'DisplayName', sprintf('w = %.0f rpm', ws(i)*60/2/pi));
    set(gca,'ColorOrderIndex',i)
    plot(freqs, sv(2, :), '--', 'HandleVisibility', 'off');
  end
  hold off;
  set(gca,'xscale','log'); set(gca,'yscale','log');
  legend('location', 'southwest');
#+end_src

#+NAME: fig:G_sigma
#+HEADER: :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="Figures/G_sigma.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:G_sigma
#+CAPTION: caption
#+RESULTS: fig:G_sigma
#+CAPTION: Evolution of the singular values with frequency
[[file:Figures/G_sigma.png]]

We compute
#+begin_src matlab :results silent :exports code
  [U,S,V] = svd(freqresp(Gtvc, 2*pi*10));
#+end_src

#+begin_src matlab :results output :exports results
  U, S, V
#+end_src

#+RESULTS:
#+begin_example
U, S, V
U =
         -0.707101109012986 -   0.00283224868340902i         -0.707104254409621 -   0.00189034277692295i
        0.00283224868340845 -     0.707101109012987i       -0.00189034277692242 +      0.70710425440962i
S =
      9.01532756059351e-06                         0
                         0      6.01714794171208e-06
V =
          0.707106781186547 +                     0i          0.707106781186548 +                     0i
      -1.57009245868378e-16 +     0.707106781186548i       1.57009245868377e-16 -     0.707106781186547i
#+end_example

The input and output directions are related through the singular values
\[ G v_i = \sigma_i u_i \]

So, if we consider an input in the direction $v_i$, then the output is in the direction $u_i$. Furthermore, since $\normtwo{v_i}=1$ and $\normtwo{u_i}=1$, we see that *the singular value $\sigma_i$ directly gives the gain of the matrix $G$ in this direction*.

#+begin_src matlab
  freqresp(Gtvc, 2*pi*10)*V(:, 1)
#+end_src

#+RESULTS:
| -6.3747e-06-2.5534e-08i |
| 2.5534e-08-6.3747e-06i  |

#+begin_src matlab
  S(1)*U(:, 1)
#+end_src

#+RESULTS:
| -6.3747e-06-2.5534e-08i |
| 2.5534e-08-6.3747e-06i  |

*** Closed loop SVD
#+begin_src matlab :results silent :exports none
  figure;
  sigma(Tvc, Ttvc)
#+end_src

** test

#+begin_src matlab :exports none :results silent
  figure;
  % Amplitude
  ax1 = subaxis(2,1,1);
  hold on;
  plot(freqs, abs(squeeze(freqresp(Gvc_light('du', 'fu'), freqs, 'Hz'))), '-');
  set(gca,'xscale','log'); set(gca,'yscale','log');
  ylabel('Amplitude [m/N]');
  set(gca, 'XTickLabel',[]);
  hold off;
  % Phase
  ax2 = subaxis(2,1,2);
  hold on;
  plot(freqs, 180/pi*unwrap(angle(squeeze(freqresp(Gvc_light('du', 'fu'), freqs, 'Hz')))), '-');
  set(gca,'xscale','log');
  yticks(-180:180:180);
  xlabel('Frequency [Hz]'); ylabel('Phase [deg]');
  hold off;
  linkaxes([ax1,ax2],'x');
#+end_src

#+begin_src matlab :exports none :results silent
  figure;
  % Amplitude
  ax1 = subaxis(2,1,1);
  hold on;
  plot(freqs, abs(squeeze(freqresp(-Gvc_light('dv', 'fv'), freqs, 'Hz'))), '-');
  set(gca,'xscale','log'); set(gca,'yscale','log');
  ylabel('Amplitude [m/N]');
  set(gca, 'XTickLabel',[]);
  hold off;
  % Phase
  ax2 = subaxis(2,1,2);
  hold on;
  plot(freqs, 180/pi*unwrap(angle(squeeze(freqresp(-Gvc_light('dv', 'fv'), freqs, 'Hz')))), '-');
  set(gca,'xscale','log');
  yticks(-180:180:180);
  xlabel('Frequency [Hz]'); ylabel('Phase [deg]');
  hold off;
  linkaxes([ax1,ax2],'x');
#+end_src

#+begin_src matlab :exports none :results silent
  figure;
  bode(Gpz_light, Gvc_light);
#+end_src

#+NAME: fig:coupling_simscape
#+HEADER: :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="Figures/coupling_simscape.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:coupling_simscape
#+CAPTION: caption
#+RESULTS: fig:coupling_simscape
[[file:Figures/coupling_simscape_light.png]]

And then with the heavy sample.
#+begin_src matlab :exports code :results silent
  rot_speed = wheavy;
  angle_e = 0;
  m = mheavy;

  k = kpz;
  c = 1e3;
  Gpz_heavy = linearize(mdl, io, 0.1);

  k = kvc;
  c = 1e3;
  Gvc_heavy = linearize(mdl, io, 0.1);

  Gpz_heavy.InputName  = {'Fu', 'Fv'};
  Gpz_heavy.OutputName = {'Du', 'Dv'};
  Gvc_heavy.InputName  = {'Fu', 'Fv'};
  Gvc_heavy.OutputName = {'Du', 'Dv'};
#+end_src

#+begin_src matlab :exports none :results silent
  figure;
  bode(Gpz_heavy, Gvc_heavy);
#+end_src

#+NAME: fig:coupling_simscape_heavy
#+HEADER: :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="Figures/coupling_simscape_heavy.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:coupling_simscape_heavy
#+CAPTION: caption
#+RESULTS: fig:coupling_simscape_heavy
[[file:Figures/coupling_simscape_heavy.png]]

Plot the ratio between the main transfer function and the coupling term:
#+begin_src matlab :results silent :exports none
  freqs = logspace(-2, 3, 1000);

  figure;
  hold on;
  plot(freqs, abs(squeeze(freqresp(Gvc_light('Du', 'Fu'), freqs, 'Hz')))./abs(squeeze(freqresp(Gvc_light('Dv', 'Fu'), freqs, 'Hz'))));
  plot(freqs, abs(squeeze(freqresp(Gpz_light('Du', 'Fu'), freqs, 'Hz')))./abs(squeeze(freqresp(Gpz_light('Dv', 'Fu'), freqs, 'Hz'))));
  hold off;
  xlim([freqs(1), freqs(end)]);
  set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
  xlabel('Frequency [Hz]'); ylabel('Coupling ratio');
  legend({'Voice Coil', 'Piezoelectric'})
#+end_src

#+NAME: fig:coupling_ratio_simscape_light
#+HEADER: :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="Figures/coupling_ratio_simscape_light.pdf" :var figsize="wide-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:coupling_ratio_simscape_light
#+CAPTION: caption
#+RESULTS: fig:coupling_ratio_simscape_light
[[file:Figures/coupling_ratio_simscape_light.png]]

#+begin_src matlab :results silent :exports none
  freqs = logspace(-2, 3, 1000);

  figure;
  hold on;
  plot(freqs, abs(squeeze(freqresp(Gvc_heavy('Du', 'Fu'), freqs, 'Hz')))./abs(squeeze(freqresp(Gvc_heavy('Dv', 'Fu'), freqs, 'Hz'))));
  plot(freqs, abs(squeeze(freqresp(Gpz_heavy('Du', 'Fu'), freqs, 'Hz')))./abs(squeeze(freqresp(Gpz_heavy('Dv', 'Fu'), freqs, 'Hz'))));
  hold off;
  xlim([freqs(1), freqs(end)]);
  set(gca, 'XScale', 'log'); set(gca, 'YScale', 'log');
  xlabel('Frequency [Hz]'); ylabel('Coupling ratio');
  legend({'Voice Coil', 'Piezoelectric'})
#+end_src

#+NAME: fig:coupling_ratio_simscape_heavy
#+HEADER: :tangle no :exports results :results raw :noweb yes
#+begin_src matlab :var filepath="Figures/coupling_ratio_simscape_heavy.pdf" :var figsize="wide-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+LABEL: fig:coupling_ratio_simscape_heavy
#+CAPTION: caption
#+RESULTS: fig:coupling_ratio_simscape_heavy
[[file:Figures/coupling_ratio_simscape_heavy.png]]

*** Low rotation speed and High rotation speed
#+begin_src matlab :exports code :results silent
  rot_speed = 2*pi/60; angle_e = 0;
  G_low = linearize(mdl, io, 0.1);

  rot_speed = 2*pi; angle_e = 0;
  G_high = linearize(mdl, io, 0.1);

  G_low.InputName  = {'Fu', 'Fv'};
  G_low.OutputName = {'Du', 'Dv'};
  G_high.InputName  = {'Fu', 'Fv'};
  G_high.OutputName = {'Du', 'Dv'};
#+end_src

#+begin_src matlab :results silent
  figure;
  bode(G_low, G_high);
#+end_src

** Identification in the fixed frame
Let's define some options as well as the inputs and outputs for linearization.
#+begin_src matlab :exports code :results silent
  %% Options for Linearized
  options = linearizeOptions;
  options.SampleTime = 0;

  %% Name of the Simulink File
  mdl = 'rotating_frame';

  %% Input/Output definition
  io(1) = linio([mdl, '/fx'], 1, 'input');
  io(2) = linio([mdl, '/fy'], 1, 'input');

  io(3) = linio([mdl, '/dx'], 1, 'output');
  io(4) = linio([mdl, '/dy'], 1, 'output');
#+end_src

We then define the error estimation of the error and the rotational speed.
#+begin_src matlab :exports code :results silent
  %% Run the linearization
  angle_e = 0;
  rot_speed = 0;
#+end_src

Finally, we run the linearization.
#+begin_src matlab :exports code :results silent
  G = linearize(mdl, io, 0);

  %% Input/Output names
  G.InputName  = {'Fx', 'Fy'};
  G.OutputName = {'Dx', 'Dy'};
#+end_src

#+begin_src matlab :exports code :results silent
  %% Run the linearization
  angle_e = 0;
  rot_speed = 2*pi;
  Gr = linearize(mdl, io, 0);

  %% Input/Output names
  Gr.InputName  = {'Fx', 'Fy'};
  Gr.OutputName = {'Dx', 'Dy'};
#+end_src

#+begin_src matlab :exports code :results silent
  %% Run the linearization
  angle_e = 1*2*pi/180;
  rot_speed = 2*pi;
  Ge = linearize(mdl, io, 0);

  %% Input/Output names
  Ge.InputName  = {'Fx', 'Fy'};
  Ge.OutputName = {'Dx', 'Dy'};
#+end_src

#+begin_src matlab :exports code :results silent
  figure;
  bode(G);
  % exportFig('G_x_y', 'wide-tall');

  figure;
  bode(Ge);
  % exportFig('G_x_y_e', 'normal-normal');
#+end_src

** Identification from actuator forces to displacement in the fixed frame
#+begin_src matlab :exports code :results silent
  %% Options for Linearized
  options = linearizeOptions;
  options.SampleTime = 0;

  %% Name of the Simulink File
  mdl = 'rotating_frame';

  %% Input/Output definition
  io(1) = linio([mdl, '/fu'], 1, 'input');
  io(2) = linio([mdl, '/fv'], 1, 'input');

  io(3) = linio([mdl, '/dx'], 1, 'output');
  io(4) = linio([mdl, '/dy'], 1, 'output');
#+end_src

#+begin_src matlab :exports code :results silent
  rot_speed = 2*pi;
  angle_e = 0;
  G = linearize(mdl, io, 0.0);

  G.InputName  = {'Fu', 'Fv'};
  G.OutputName = {'Dx', 'Dy'};
#+end_src

#+begin_src matlab :exports code :results silent
  rot_speed = 2*pi;
  angle_e = 0;
  G1 = linearize(mdl, io, 0.4);

  G1.InputName  = {'Fu', 'Fv'};
  G1.OutputName = {'Dx', 'Dy'};
#+end_src

#+begin_src matlab :exports code :results silent
  rot_speed = 2*pi;
  angle_e = 0;
  G2 = linearize(mdl, io, 0.8);

  G2.InputName  = {'Fu', 'Fv'};
  G2.OutputName = {'Dx', 'Dy'};
#+end_src

#+begin_src matlab :exports code :results silent
  figure;
  bode(G, G1, G2);
  exportFig('G_u_v_to_x_y', 'wide-tall');
#+end_src

** Effect of the X-Y stage stiffness
  <<sec:effect_stiffness>>

*** TODO At full speed, check how the coupling changes with the stiffness of the actuators

* Control Implementation
  <<sec:control>>

** Measurement in the fixed reference frame

* Bibliography                                                       :ignore:
# #+BIBLIOGRAPHY: /home/tdehaeze/MEGA/These/Ressources/references.bib plain option:-a option:-noabstract option:-nokeywords option:-noheader option:-nofooter option:-nobibsource limit:t