#+TITLE:Measurements
:DRAWER:
#+STARTUP: overview

#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/htmlize.css"/>
#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/readtheorg.css"/>
#+HTML_HEAD: <link rel="stylesheet" type="text/css" href="../css/zenburn.css"/>
#+HTML_HEAD: <script type="text/javascript" src="../js/jquery.min.js"></script>
#+HTML_HEAD: <script type="text/javascript" src="../js/bootstrap.min.js"></script>
#+HTML_HEAD: <script type="text/javascript" src="../js/jquery.stickytableheaders.min.js"></script>
#+HTML_HEAD: <script type="text/javascript" src="../js/readtheorg.js"></script>

#+PROPERTY: header-args:matlab  :session *MATLAB*
#+PROPERTY: header-args:matlab+ :comments org
#+PROPERTY: header-args:matlab+ :results output
#+PROPERTY: header-args:matlab+ :exports both
#+PROPERTY: header-args:matlab+ :eval no-export
#+PROPERTY: header-args:matlab+ :output-dir figs
:END:

For all the measurements shown here:
- geophones used are L22 with a resonance frequency of 1Hz
- the signals are amplified with voltage amplifiers with a gain of 60dB
- the voltage amplifiers include a low pass filter with a cut-off frequency at 1kHz

* Effect of the Slip-Ring on the signal
** Experimental Setup
Two measurements are made with the control systems of all the stages turned OFF.

One geophone is located on the marble while the other is located at the sample location (figure [[fig:setup_slipring]]).

#+name: fig:setup_slipring
#+caption: Experimental Setup
#+attr_html: :width 500px
[[file:./img/IMG_20190430_112615.jpg]]

The two measurements are:
| Measurement File | Description                                                      |
|------------------+------------------------------------------------------------------|
| =meas_008.mat=   | Signal from the top geophone does not goes through the Slip-ring |
| =meas_009.mat=   | Signal goes through the Slip-ring (as shown on the figure above) |

Each of the measurement =mat= file contains one =data= array with 3 columns:
| Column number | Description       |
|---------------+-------------------|
|             1 | Geophone - Marble |
|             2 | Geophone - Sample |
|             3 | Time              |

** Matlab Init                                              :noexport:ignore:
#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
  <<matlab-init>>
#+end_src

** Load data
We load the data of the z axis of two geophones.

#+begin_src matlab :results none
  d8 = load('mat/data_008.mat', 'data'); d8 = d8.data;
  d9 = load('mat/data_009.mat', 'data'); d9 = d9.data;
#+end_src

** Analysis - Time Domain
First, we compare the time domain signals for the two experiments (figure [[fig:slipring_time]]).


#+begin_src matlab :results none
  figure;
  hold on;
  plot(d9(:, 3), d9(:, 2), 'DisplayName', 'Slip-Ring');
  plot(d8(:, 3), d8(:, 2), 'DisplayName', 'Wire');
  hold off;
  xlabel('Time [s]'); ylabel('Voltage [V]');
  xlim([0, 50]);
  legend('location', 'northeast');
#+end_src

#+NAME: fig:slipring_time
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/slipring_time.pdf" :var figsize="wide-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:slipring_time
#+CAPTION: Effect of the Slip-Ring on the measured signal - Time domain
#+RESULTS: fig:slipring_time
[[file:figs/slipring_time.png]]

** Analysis - Frequency Domain
We then compute the Power Spectral Density of the two signals and we compare them (figure [[fig:slipring_asd]]).
#+begin_src matlab :results none
  dt = d8(2, 3) - d8(1, 3);
  Fs = 1/dt;

  win = hanning(ceil(1*Fs));
#+end_src

#+begin_src matlab :results none
  [pxx8, f] = pwelch(d8(:, 2), win, [], [], Fs);
  [pxx9, ~] = pwelch(d9(:, 2), win, [], [], Fs);
#+end_src

#+begin_src matlab :results none
  figure;
  hold on;
  plot(f, sqrt(pxx9), 'DisplayName', 'Slip-Ring');
  plot(f, sqrt(pxx8), 'DisplayName', 'Wire');
  hold off;
  set(gca, 'xscale', 'log');
  set(gca, 'yscale', 'log');
  xlabel('Frequency [Hz]'); ylabel('Amplitude Spectral Density $\left[\frac{V}{\sqrt{Hz}}\right]$')
  xlim([1, 500]);
  legend('Location', 'southwest');
#+end_src

#+NAME: fig:slipring_asd
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/slipring_asd.pdf" :var figsize="wide-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:slipring_asd
#+CAPTION: Effect of the Slip-Ring on the measured signal - Frequency domain
#+RESULTS: fig:slipring_asd
[[file:figs/slipring_asd.png]]

** Conclusion
#+begin_important
- Connecting the geophone through the Slip-Ring seems to induce a lot of noise.
#+end_important

#+begin_note
*Remaining questions to answer*:
- Why is there a sharp peak at 300Hz?
- Why the use of the Slip-Ring does induce a noise?
- Can the capacitive/inductive properties of the wires in the Slip-ring does not play well with the geophone? (resonant RLC circuit)
#+end_note

* Effect of all the control systems on the Sample vibrations
** Experimental Setup
We here measure the signals of two geophones:
- One is located on top of the Sample platform
- One is located on the marble

The signal from the top geophone does not go trought the slip-ring.

First, all the control systems are turned ON, then, they are turned one by one.
Each measurement are done during 50s.

#+name: tab:control_system_on_off
#+caption: Summary of the measurements and the states of the control systems
| Ty   | Ry   | Slip Ring | Spindle | Hexapod | Meas. file     |
|------+------+-----------+---------+---------+----------------|
| *ON* | *ON* | *ON*      | *ON*    | *ON*    | =meas_003.mat= |
| OFF  | *ON* | *ON*      | *ON*    | *ON*    | =meas_004.mat= |
| OFF  | OFF  | *ON*      | *ON*    | *ON*    | =meas_005.mat= |
| OFF  | OFF  | OFF       | *ON*    | *ON*    | =meas_006.mat= |
| OFF  | OFF  | OFF       | OFF     | *ON*    | =meas_007.mat= |
| OFF  | OFF  | OFF       | OFF     | OFF     | =meas_008.mat= |

Each of the =mat= file contains one array =data= with 3 columns:
| Column number | Description       |
|---------------+-------------------|
|             1 | Geophone - Marble |
|             2 | Geophone - Sample |
|             3 | Time              |

** Matlab Init                                              :noexport:ignore:
#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
  <<matlab-init>>
#+end_src

** Load data
We load the data of the z axis of two geophones.
#+begin_src matlab :results none
  d3 = load('mat/data_003.mat', 'data'); d3 = d3.data;
  d4 = load('mat/data_004.mat', 'data'); d4 = d4.data;
  d5 = load('mat/data_005.mat', 'data'); d5 = d5.data;
  d6 = load('mat/data_006.mat', 'data'); d6 = d6.data;
  d7 = load('mat/data_007.mat', 'data'); d7 = d7.data;
  d8 = load('mat/data_008.mat', 'data'); d8 = d8.data;
#+end_src

** Analysis - Time Domain
First, we can look at the time domain data and compare all the measurements:
- comparison for the geophone at the sample location (figure [[fig:time_domain_sample]])
- comparison for the geophone on the granite (figure [[fig:time_domain_marble]])

#+begin_src matlab :results none
  figure;
  hold on;
  plot(d3(:, 3), d3(:, 2), 'DisplayName', 'All ON');
  plot(d4(:, 3), d4(:, 2), 'DisplayName', 'Ty OFF');
  plot(d5(:, 3), d5(:, 2), 'DisplayName', 'Ry OFF');
  plot(d6(:, 3), d6(:, 2), 'DisplayName', 'S-R OFF');
  plot(d7(:, 3), d7(:, 2), 'DisplayName', 'Rz OFF');
  plot(d8(:, 3), d8(:, 2), 'DisplayName', 'Hexa OFF');
  hold off;
  xlabel('Time [s]'); ylabel('Voltage [V]');
  xlim([0, 50]);
  legend('Location', 'bestoutside');
#+end_src

#+NAME: fig:time_domain_sample
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/time_domain_sample.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:time_domain_sample
#+CAPTION: Comparison of the time domain data when turning off the control system of the stages - Geophone at the sample location
#+RESULTS: fig:time_domain_sample
[[file:figs/time_domain_sample.png]]


#+begin_src matlab :results none
  figure;
  hold on;
  plot(d3(:, 3), d3(:, 1), 'DisplayName', 'All ON');
  plot(d4(:, 3), d4(:, 1), 'DisplayName', 'Ty OFF');
  plot(d5(:, 3), d5(:, 1), 'DisplayName', 'Ry OFF');
  plot(d6(:, 3), d6(:, 1), 'DisplayName', 'S-R OFF');
  plot(d7(:, 3), d7(:, 1), 'DisplayName', 'Rz OFF');
  plot(d8(:, 3), d8(:, 1), 'DisplayName', 'Hexa OFF');
  hold off;
  xlabel('Time [s]'); ylabel('Voltage [V]');
  xlim([0, 50]);
  legend('Location', 'bestoutside');
#+end_src

#+NAME: fig:time_domain_marble
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/time_domain_marble.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:time_domain_marble
#+CAPTION: Comparison of the time domain data when turning off the control system of the stages - Geophone on the marble
#+RESULTS: fig:time_domain_marble
[[file:figs/time_domain_marble.png]]

** Analysis - Frequency Domain
#+begin_src matlab :results none
  dt = d3(2, 3) - d3(1, 3);

  Fs = 1/dt;
  win = hanning(ceil(10*Fs));
#+end_src

*** Vibrations at the sample location
First, we compute the Power Spectral Density of the signals coming from the Geophone located at the sample location.
#+begin_src matlab :results none
  [px3, f] = pwelch(d3(:, 2), win, [], [], Fs);
  [px4, ~] = pwelch(d4(:, 2), win, [], [], Fs);
  [px5, ~] = pwelch(d5(:, 2), win, [], [], Fs);
  [px6, ~] = pwelch(d6(:, 2), win, [], [], Fs);
  [px7, ~] = pwelch(d7(:, 2), win, [], [], Fs);
  [px8, ~] = pwelch(d8(:, 2), win, [], [], Fs);
#+end_src

And we compare all the signals (figures [[fig:psd_sample_comp]] and [[fig:psd_sample_comp_high_freq]]).
#+begin_src matlab :results none
  figure;
  hold on;
  plot(f, sqrt(px3), 'DisplayName', 'All ON');
  plot(f, sqrt(px4), 'DisplayName', 'Ty OFF');
  plot(f, sqrt(px5), 'DisplayName', 'Ry OFF');
  plot(f, sqrt(px6), 'DisplayName', 'S-R OFF');
  plot(f, sqrt(px7), 'DisplayName', 'Rz OFF');
  plot(f, sqrt(px8), 'DisplayName', 'Hexa OFF');
  hold off;
  set(gca, 'xscale', 'log');
  set(gca, 'yscale', 'log');
  xlabel('Frequency [Hz]'); ylabel('Amplitude Spectral Density $\left[\frac{V}{\sqrt{Hz}}\right]$')
  xlim([0.1, 500]);
  legend('Location', 'southwest');
#+end_src

#+NAME: fig:psd_sample_comp
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/psd_sample_comp.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:psd_sample_comp
#+CAPTION: Amplitude Spectral Density of the signal coming from the top geophone
#+RESULTS: fig:psd_sample_comp
[[file:figs/psd_sample_comp.png]]


#+begin_src matlab :results none :tangle no :exports none
  xlim([80, 500]);
#+end_src

#+NAME: fig:psd_sample_comp_high_freq
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/psd_sample_comp_high_freq.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:psd_sample_comp_high_freq
#+CAPTION: Amplitude Spectral Density of the signal coming from the top geophone (zoom at high frequencies)
#+RESULTS: fig:psd_sample_comp_high_freq
[[file:figs/psd_sample_comp_high_freq.png]]

*** Vibrations on the marble
Now we plot the same curves for the geophone located on the marble.
#+begin_src matlab :results none
  [px3, f] = pwelch(d3(:, 1), win, [], [], Fs);
  [px4, ~] = pwelch(d4(:, 1), win, [], [], Fs);
  [px5, ~] = pwelch(d5(:, 1), win, [], [], Fs);
  [px6, ~] = pwelch(d6(:, 1), win, [], [], Fs);
  [px7, ~] = pwelch(d7(:, 1), win, [], [], Fs);
  [px8, ~] = pwelch(d8(:, 1), win, [], [], Fs);
#+end_src

And we compare the Amplitude Spectral Densities (figures [[fig:psd_marble_comp]] and [[fig:psd_marble_comp_high_freq]])
#+begin_src matlab :results none
  figure;
  hold on;
  plot(f, sqrt(px3), 'DisplayName', 'All ON');
  plot(f, sqrt(px4), 'DisplayName', 'Ty OFF');
  plot(f, sqrt(px5), 'DisplayName', 'Ry OFF');
  plot(f, sqrt(px6), 'DisplayName', 'S-R OFF');
  plot(f, sqrt(px7), 'DisplayName', 'Rz OFF');
  plot(f, sqrt(px8), 'DisplayName', 'Hexa OFF');
  hold off;
  set(gca, 'xscale', 'log');
  set(gca, 'yscale', 'log');
  xlabel('Frequency [Hz]'); ylabel('Amplitude Spectral Density $\left[\frac{V}{\sqrt{Hz}}\right]$')
  xlim([0.1, 500]);
  legend('Location', 'northeast');
#+end_src

#+NAME: fig:psd_marble_comp
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/psd_marble_comp.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:psd_marble_comp
#+CAPTION: Amplitude Spectral Density of the signal coming from the top geophone
#+RESULTS: fig:psd_marble_comp
[[file:figs/psd_marble_comp.png]]


#+begin_src matlab :results none :tangle no :exports none
  legend('Location', 'southwest');
  xlim([80, 500]);
#+end_src

#+NAME: fig:psd_marble_comp_high_freq
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/psd_marble_comp_high_freq.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:psd_marble_comp_high_freq
#+CAPTION: Amplitude Spectral Density of the signal coming from the top geophone (zoom at high frequencies)
#+RESULTS: fig:psd_marble_comp_high_freq
[[file:figs/psd_marble_comp_high_freq.png]]
** Effect of the control system on the transmissibility from ground to sample
As the feedback loops change the dynamics of the system, we should see differences on the transfer function from marble velocity to sample velocity when turning off the control systems (figure [[fig:trans_comp]]).

#+begin_src matlab :results none
  dt = d3(2, 3) - d3(1, 3);

  Fs = 1/dt;
  win = hanning(ceil(1*Fs));
#+end_src

First, we compute the Power Spectral Density of the signals coming from the Geophone located at the sample location.
#+begin_src matlab :results none
  [T3, f] = tfestimate(d3(:, 1), d3(:, 2), win, [], [], Fs);
  [T4, ~] = tfestimate(d4(:, 1), d4(:, 2), win, [], [], Fs);
  [T5, ~] = tfestimate(d5(:, 1), d5(:, 2), win, [], [], Fs);
  [T6, ~] = tfestimate(d6(:, 1), d6(:, 2), win, [], [], Fs);
  [T7, ~] = tfestimate(d7(:, 1), d7(:, 2), win, [], [], Fs);
  [T8, ~] = tfestimate(d8(:, 1), d8(:, 2), win, [], [], Fs);
#+end_src

#+begin_src matlab :results none
  figure;
  ax1 = subplot(2, 1, 1);
  hold on;
  plot(f, abs(T3), 'DisplayName', 'All ON');
  plot(f, abs(T4), 'DisplayName', 'Ty OFF');
  plot(f, abs(T5), 'DisplayName', 'Ry OFF');
  plot(f, abs(T6), 'DisplayName', 'S-R OFF');
  plot(f, abs(T7), 'DisplayName', 'Rz OFF');
  plot(f, abs(T8), 'DisplayName', 'Hexa OFF');
  hold off;
  set(gca, 'xscale', 'log'); set(gca, 'yscale', 'log');
  set(gca, 'XTickLabel',[]);
  ylabel('Magnitude');
  legend('Location', 'northwest');

  ax2 = subplot(2, 1, 2);
  hold on;
  plot(f, mod(180+180/pi*phase(T3), 360)-180);
  plot(f, mod(180+180/pi*phase(T4), 360)-180);
  plot(f, mod(180+180/pi*phase(T5), 360)-180);
  plot(f, mod(180+180/pi*phase(T6), 360)-180);
  plot(f, mod(180+180/pi*phase(T7), 360)-180);
  plot(f, mod(180+180/pi*phase(T8), 360)-180);
  hold off;
  set(gca, 'xscale', 'log');
  ylim([-180, 180]);
  yticks([-180, -90, 0, 90, 180]);
  xlabel('Frequency [Hz]'); ylabel('Phase');

  linkaxes([ax1,ax2],'x');
  xlim([1, 500]);
#+end_src

#+NAME: fig:trans_comp
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/trans_comp.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:trans_comp
#+CAPTION: Comparison of the transfer function from the geophone on the marble to the geophone at the sample location
#+RESULTS: fig:trans_comp
[[file:figs/trans_comp.png]]
** Conclusion
#+begin_important
- The control system of the Ty stage induces a lot of vibrations of the marble
#+end_important

#+begin_note
- Why it seems that the measurement noise at high frequency is the limiting factor when the slip ring is ON but not when it is OFF?
#+end_note

* Effect of all the control systems on the Sample vibrations - One stage at a time
** Experimental Setup
We here measure the signals of two geophones:
- One is located on top of the Sample platform
- One is located on the marble

The signal from the top geophone does go trought the slip-ring.

All the control systems are turned OFF, then, they are turned on one at a time.

Each measurement are done during 100s.

The settings of the voltage amplifier are shown on figure [[fig:amplifier_settings]].
A first order low pass filter with a cut-off frequency of 1kHz is added before the voltage amplifier.

#+name: tab:control_system_on_off
#+caption: Summary of the measurements and the states of the control systems
| Ty   | Ry   | Slip Ring | Spindle | Hexapod | Meas. file     |
|------+------+-----------+---------+---------+----------------|
| OFF  | OFF  | OFF       | OFF     | OFF     | =meas_013.mat= |
| *ON* | OFF  | OFF       | OFF     | OFF     | =meas_014.mat= |
| OFF  | *ON* | OFF       | OFF     | OFF     | =meas_015.mat= |
| OFF  | OFF  | *ON*      | OFF     | OFF     | =meas_016.mat= |
| OFF  | OFF  | OFF       | *ON*    | OFF     | =meas_017.mat= |
| OFF  | OFF  | OFF       | OFF     | *ON*    | =meas_018.mat= |

Each of the =mat= file contains one array =data= with 3 columns:
| Column number | Description       |
|---------------+-------------------|
|             1 | Geophone - Marble |
|             2 | Geophone - Sample |
|             3 | Time              |

#+name: fig:amplifier_settings
#+caption: Voltage amplifier settings for the measurement
#+attr_html: :width 500px
[[file:./img/IMG_20190507_101459.jpg]]

** Matlab Init                                              :noexport:ignore:
#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
  <<matlab-init>>
#+end_src

** Load data
We load the data of the z axis of two geophones.
#+begin_src matlab :results none
  d_of = load('mat/data_013.mat', 'data'); d_of = d_of.data;
  d_ty = load('mat/data_014.mat', 'data'); d_ty = d_ty.data;
  d_ry = load('mat/data_015.mat', 'data'); d_ry = d_ry.data;
  d_sr = load('mat/data_016.mat', 'data'); d_sr = d_sr.data;
  d_rz = load('mat/data_017.mat', 'data'); d_rz = d_rz.data;
  d_he = load('mat/data_018.mat', 'data'); d_he = d_he.data;
#+end_src

** Analysis - Time Domain
First, we can look at the time domain data and compare all the measurements:
- comparison for the geophone at the sample location (figure [[fig:time_domain_sample_lpf]])
- comparison for the geophone on the granite (figure [[fig:time_domain_marble_lpf]])

#+begin_src matlab :results none
  figure;
  hold on;
  plot(d_of(:, 3), d_of(:, 2), 'DisplayName', 'All OFF';
  plot(d_ty(:, 3), d_ty(:, 2), 'DisplayName', 'Ty ON');
  plot(d_ry(:, 3), d_ry(:, 2), 'DisplayName', 'Ry ON');
  plot(d_sr(:, 3), d_sr(:, 2), 'DisplayName', 'S-R ON');
  plot(d_rz(:, 3), d_rz(:, 2), 'DisplayName', 'Rz ON');
  plot(d_he(:, 3), d_he(:, 2), 'DisplayName', 'Hexa ON');
  hold off;
  xlabel('Time [s]'); ylabel('Voltage [V]');
  xlim([0, 50]);
  legend('Location', 'bestoutside');
#+end_src

#+NAME: fig:time_domain_sample_lpf
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/time_domain_sample_lpf.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:time_domain_sample_lpf
#+CAPTION: Comparison of the time domain data when turning off the control system of the stages - Geophone at the sample location
#+RESULTS: fig:time_domain_sample_lpf
[[file:figs/time_domain_sample_lpf.png]]


#+begin_src matlab :results none
  figure;
  hold on;
  plot(d_of(:, 3), d_of(:, 1), 'DisplayName', 'All OFF');
  plot(d_ty(:, 3), d_ty(:, 1), 'DisplayName', 'Ty ON');
  plot(d_ry(:, 3), d_ry(:, 1), 'DisplayName', 'Ry ON');
  plot(d_sr(:, 3), d_sr(:, 1), 'DisplayName', 'S-R ON');
  plot(d_rz(:, 3), d_rz(:, 1), 'DisplayName', 'Rz ON');
  plot(d_he(:, 3), d_he(:, 1), 'DisplayName', 'Hexa ON');
  hold off;
  xlabel('Time [s]'); ylabel('Voltage [V]');
  xlim([0, 50]);
  legend('Location', 'bestoutside');
#+end_src

#+NAME: fig:time_domain_marble_lpf
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/time_domain_marble_lpf.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:time_domain_marble_lpf
#+CAPTION: Comparison of the time domain data when turning off the control system of the stages - Geophone on the marble
#+RESULTS: fig:time_domain_marble_lpf
[[file:figs/time_domain_marble_lpf.png]]

** Analysis - Frequency Domain
#+begin_src matlab :results none
  dt = d_of(2, 3) - d_of(1, 3);

  Fs = 1/dt;
  win = hanning(ceil(10*Fs));
#+end_src

*** Vibrations at the sample location
First, we compute the Power Spectral Density of the signals coming from the Geophone located at the sample location.
#+begin_src matlab :results none
  [px_of, f] = pwelch(d_of(:, 2), win, [], [], Fs);
  [px_ty, ~] = pwelch(d_ty(:, 2), win, [], [], Fs);
  [px_ry, ~] = pwelch(d_ry(:, 2), win, [], [], Fs);
  [px_sr, ~] = pwelch(d_sr(:, 2), win, [], [], Fs);
  [px_rz, ~] = pwelch(d_rz(:, 2), win, [], [], Fs);
  [px_he, ~] = pwelch(d_he(:, 2), win, [], [], Fs);
#+end_src

And we compare all the signals (figures [[fig:psd_sample_comp_lpf]] and [[fig:psd_sample_comp_high_freq_lpf]]).
#+begin_src matlab :results none
  figure;
  hold on;
  plot(f, sqrt(px_of), 'DisplayName', 'All OFF');
  plot(f, sqrt(px_ty), 'DisplayName', 'Ty ON');
  plot(f, sqrt(px_ry), 'DisplayName', 'Ry ON');
  plot(f, sqrt(px_sr), 'DisplayName', 'S-R ON');
  plot(f, sqrt(px_rz), 'DisplayName', 'Rz ON');
  plot(f, sqrt(px_he), 'DisplayName', 'Hexa ON');
  hold off;
  set(gca, 'xscale', 'log');
  set(gca, 'yscale', 'log');
  xlabel('Frequency [Hz]'); ylabel('Amplitude Spectral Density $\left[\frac{V}{\sqrt{Hz}}\right]$')
  xlim([0.1, 500]);
  legend('Location', 'southwest');
#+end_src

#+NAME: fig:psd_sample_comp_lpf
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/psd_sample_comp_lpf.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:psd_sample_comp_lpf
#+CAPTION: Amplitude Spectral Density of the signal coming from the top geophone
#+RESULTS: fig:psd_sample_comp_lpf
[[file:figs/psd_sample_comp_lpf.png]]


#+begin_src matlab :results none :tangle no :exports none
  xlim([80, 500]);
#+end_src

#+NAME: fig:psd_sample_comp_high_freq_lpf
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/psd_sample_comp_high_freq_lpf.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:psd_sample_comp_high_freq_lpf
#+CAPTION: Amplitude Spectral Density of the signal coming from the top geophone (zoom at high frequencies)
#+RESULTS: fig:psd_sample_comp_high_freq_lpf
[[file:figs/psd_sample_comp_high_freq_lpf.png]]

*** Vibrations on the marble
Now we plot the same curves for the geophone located on the marble.
#+begin_src matlab :results none
  [px_of, f] = pwelch(d_of(:, 1), win, [], [], Fs);
  [px_ty, ~] = pwelch(d_ty(:, 1), win, [], [], Fs);
  [px_ry, ~] = pwelch(d_ry(:, 1), win, [], [], Fs);
  [px_sr, ~] = pwelch(d_sr(:, 1), win, [], [], Fs);
  [px_rz, ~] = pwelch(d_rz(:, 1), win, [], [], Fs);
  [px_he, ~] = pwelch(d_he(:, 1), win, [], [], Fs);
#+end_src

And we compare the Amplitude Spectral Densities (figures [[fig:psd_marble_comp_lpf]] and [[fig:psd_marble_comp_lpf_high_freq]])
#+begin_src matlab :results none
  figure;
  hold on;
  plot(f, sqrt(px_of), 'DisplayName', 'All OFF');
  plot(f, sqrt(px_ty), 'DisplayName', 'Ty ON');
  plot(f, sqrt(px_ry), 'DisplayName', 'Ry ON');
  plot(f, sqrt(px_sr), 'DisplayName', 'S-R ON');
  plot(f, sqrt(px_rz), 'DisplayName', 'Rz ON');
  plot(f, sqrt(px_he), 'DisplayName', 'Hexa ON');
  hold off;
  set(gca, 'xscale', 'log');
  set(gca, 'yscale', 'log');
  xlabel('Frequency [Hz]'); ylabel('Amplitude Spectral Density $\left[\frac{V}{\sqrt{Hz}}\right]$')
  xlim([0.1, 500]);
  legend('Location', 'northeast');
#+end_src

#+NAME: fig:psd_marble_comp_lpf
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/psd_marble_comp_lpf.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:psd_marble_comp_lpf
#+CAPTION: Amplitude Spectral Density of the signal coming from geophone located on the marble
#+RESULTS: fig:psd_marble_comp_lpf
[[file:figs/psd_marble_comp_lpf.png]]


#+begin_src matlab :results none :tangle no :exports none
  legend('Location', 'southwest');
  xlim([80, 500]);
#+end_src

#+NAME: fig:psd_marble_comp_lpf_high_freq
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/psd_marble_comp_lpf_high_freq.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:psd_marble_comp_lpf_high_freq
#+CAPTION: Amplitude Spectral Density of the signal coming from the geophone located on the marble (zoom at high frequencies)
#+RESULTS: fig:psd_marble_comp_lpf_high_freq
[[file:figs/psd_marble_comp_lpf_high_freq.png]]

** Conclusion
#+begin_important
  - The Ty stage induces vibrations of the marble and at the sample location above 100Hz
  - The hexapod stage induces vibrations at the sample position above 220Hz
#+end_note

* Effect of the Symetrie Driver
** Experimental Setup
We here measure the signals of two geophones:
- One is located on top of the Sample platform
- One is located on the marble

The signal from the top geophone does go trought the slip-ring.

All the control systems are turned OFF except the Hexapod one.

Each measurement are done during 100s.

The settings of the voltage amplifier are:
- DC
- 60dB
- 1kHz

A first order low pass filter with a cut-off frequency of 1kHz is added before the voltage amplifier.

The measurements are:
- =meas_018.mat=: Hexapod's driver on the granite
- =meas_019.mat=: Hexapod's driver on the ground

Each of the =mat= file contains one array =data= with 3 columns:
| Column number | Description       |
|---------------+-------------------|
|             1 | Geophone - Marble |
|             2 | Geophone - Sample |
|             3 | Time              |

** Matlab Init                                              :noexport:ignore:
#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
  <<matlab-init>>
#+end_src

** Load data
We load the data of the z axis of two geophones.
#+begin_src matlab :results none
  d_18 = load('mat/data_018.mat', 'data'); d_18 = d_18.data;
  d_19 = load('mat/data_019.mat', 'data'); d_19 = d_19.data;
#+end_src

** Analysis - Time Domain
#+begin_src matlab :results none
  figure;
  hold on;
  plot(d_19(:, 3), d_19(:, 1), 'DisplayName', 'Driver - Ground');
  plot(d_18(:, 3), d_18(:, 1), 'DisplayName', 'Driver - Granite');
  hold off;
  xlabel('Time [s]'); ylabel('Voltage [V]');
  xlim([0, 50]);
  legend('Location', 'bestoutside');
#+end_src

#+NAME: fig:time_domain_hexa_driver
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/time_domain_hexa_driver.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:time_domain_hexa_driver
#+CAPTION: Comparison of the time domain data when turning off the control system of the stages - Geophone at the sample location
#+RESULTS: fig:time_domain_hexa_driver
[[file:figs/time_domain_hexa_driver.png]]

** Analysis - Frequency Domain
#+begin_src matlab :results none
  dt = d_18(2, 3) - d_18(1, 3);

  Fs = 1/dt;
  win = hanning(ceil(10*Fs));
#+end_src

*** Vibrations at the sample location
First, we compute the Power Spectral Density of the signals coming from the Geophone located at the sample location.
#+begin_src matlab :results none
  [px_18, f] = pwelch(d_18(:, 1), win, [], [], Fs);
  [px_19, ~] = pwelch(d_19(:, 1), win, [], [], Fs);
#+end_src

#+begin_src matlab :results none
  figure;
  hold on;
  plot(f, sqrt(px_19), 'DisplayName', 'Driver - Ground');
  plot(f, sqrt(px_18), 'DisplayName', 'Driver - Granite');
  hold off;
  set(gca, 'xscale', 'log');
  set(gca, 'yscale', 'log');
  xlabel('Frequency [Hz]'); ylabel('Amplitude Spectral Density $\left[\frac{V}{\sqrt{Hz}}\right]$')
  xlim([0.1, 500]);
  legend('Location', 'southwest');
#+end_src

#+NAME: fig:psd_hexa_driver
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/psd_hexa_driver.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:psd_hexa_driver
#+CAPTION: Amplitude Spectral Density of the signal coming from the top geophone
#+RESULTS: fig:psd_hexa_driver
[[file:figs/psd_hexa_driver.png]]


#+begin_src matlab :results none :tangle no :exports none
  xlim([80, 500]);
#+end_src

#+NAME: fig:psd_hexa_driver_high_freq
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/psd_hexa_driver_high_freq.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:psd_hexa_driver_high_freq
#+CAPTION: Amplitude Spectral Density of the signal coming from the top geophone (zoom at high frequencies)
#+RESULTS: fig:psd_hexa_driver_high_freq
[[file:figs/psd_hexa_driver_high_freq.png]]

** Conclusion
#+begin_important
  Even tough the Hexapod's driver vibrates quite a lot, it does not generate significant vibrations of the granite when either placed on the granite or on the ground.
#+end_important

* Transfer function from one stage to the other
** Experimental Setup
For all the measurements in this section:
- all the control stages are OFF.
- the measurements are on the $z$ direction

*** From Marble to Ty - =mat/meas_010.mat=
One geophone is on the marble, one is on the Ty stage (see figures [[fig:setup_m_ty]], [[fig:setup_m_ty_zoom]] and [[fig:setup_m_ty_top]]).

The =data= array contains the following columns:
| Column | Description |
|--------+-------------|
|      1 | Ground      |
|      2 | Ty          |
|      3 | Time        |

#+name: fig:setup_m_ty
#+caption: Setup with one geophone on the marble and one on top of the translation stage
#+attr_html: :width 500px
[[file:./img/IMG_20190430_155330.jpg]]

#+name: fig:setup_m_ty_zoom
#+caption: Setup with one geophone on the marble and one on top of the translation stage - Close up view
#+attr_html: :width 500px
[[file:./img/IMG_20190430_155335.jpg]]

#+name: fig:setup_m_ty_top
#+caption: Setup with one geophone on the marble and one on top of the translation stage - Top view
#+attr_html: :width 500px
[[file:./img/IMG_20190430_155342.jpg]]

*** From Marble to Ry - =mat/meas_011.mat=
One geophone is on the marble, one is on the Ry stage (see figure [[fig:setup_m_ry]])

The =data= array contains the following columns:
| Column | Description |
|--------+-------------|
|      1 | Ground      |
|      2 | Ry          |
|      3 | Time        |

#+name: fig:setup_m_ry
#+caption: Setup with one geophone on the marble and one on top of the Tilt Stage
#+attr_html: :width 500px
[[file:./img/IMG_20190430_163919.jpg]]

*** From Ty to Ry - =mat/meas_012.mat=
One geophone is on the Ty stage, one is on the Ry stage (see figures [[fig:setup_ty_ry]], [[fig:setup_ty_ry_top]] and [[fig:setup_ty_ry_zoom]])
One geophone on the Ty stage, one geophone on the Ry stage.

The =data= array contains the following columns:
| Column | Description |
|--------+-------------|
|      1 | Ty          |
|      2 | Ry          |
|      3 | Time        |

#+name: fig:setup_ty_ry
#+caption: Setup with one geophone on the translation stage and one on top of the Tilt Stage
#+attr_html: :width 500px
[[file:./img/IMG_20190430_170405.jpg]]

#+name: fig:setup_ty_ry_top
#+caption: Setup with one geophone on the translation stage and one on top of the Tilt Stage - Top view
#+attr_html: :width 500px
[[file:./img/IMG_20190430_170418.jpg]]

#+name: fig:setup_ty_ry_zoom
#+caption: Setup with one geophone on the translation stage and one on top of the Tilt Stage - Close up view
#+attr_html: :width 500px
[[file:./img/IMG_20190430_170425.jpg]]

** Matlab Init                                              :noexport:ignore:
#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
  <<matlab-init>>
#+end_src

** Load data
We load the data of the z axis of two geophones.
#+begin_src matlab :results none
  m_ty  = load('mat/data_010.mat', 'data'); m_ty  = m_ty.data;
  m_ry  = load('mat/data_011.mat', 'data'); m_ry  = m_ry.data;
  ty_ry = load('mat/data_012.mat', 'data'); ty_ry = ty_ry.data;
#+end_src

** Analysis - Time Domain
First, we can look at the time domain data.

#+begin_src matlab :results none
  figure;
  hold on;
  plot(m_ty(:, 3), m_ty(:, 1), 'DisplayName', 'Marble');
  plot(m_ty(:, 3), m_ty(:, 2), 'DisplayName', 'Ty');
  hold off;
  xlabel('Time [s]'); ylabel('Voltage [V]');
  legend('Location', 'northeast');
  xlim([0, 500]);
#+end_src

#+NAME: fig:time_domain_m_ty
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/time_domain_m_ty.pdf" :var figsize="wide-normal" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:time_domain_m_ty
#+CAPTION: Time domain - Marble and translation stage
#+RESULTS: fig:time_domain_m_ty
[[file:figs/time_domain_m_ty.png]]


#+begin_src matlab :results none
  figure;
  hold on;
  plot(m_ry(:, 3), m_ry(:, 1), 'DisplayName', 'Marble');
  plot(m_ry(:, 3), m_ry(:, 2), 'DisplayName', 'Ty');
  hold off;
  xlabel('Time [s]'); ylabel('Voltage [V]');
  legend('Location', 'northeast');
  xlim([0, 500]);
#+end_src

#+NAME: fig:time_domain_m_ry
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/time_domain_m_ry.pdf" :var figsize="wide-normal" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:time_domain_m_ry
#+CAPTION: Time domain - Marble and tilt stage
#+RESULTS: fig:time_domain_m_ry
[[file:figs/time_domain_m_ry.png]]

#+begin_src matlab :results none
  figure;
  hold on;
  plot(ty_ry(:, 3), ty_ry(:, 1), 'DisplayName', 'Ty');
  plot(ty_ry(:, 3), ty_ry(:, 2), 'DisplayName', 'Ry');
  hold off;
  xlabel('Time [s]'); ylabel('Voltage [V]');
  legend('Location', 'northeast');
  xlim([0, 500]);
#+end_src

#+NAME: fig:time_domain_ty_ry
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/time_domain_ty_ry.pdf" :var figsize="wide-normal" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:time_domain_ty_ry
#+CAPTION: Time domain - Translation stage and tilt stage
#+RESULTS: fig:time_domain_ty_ry
[[file:figs/time_domain_ty_ry.png]]

** Analysis - Frequency Domain
#+begin_src matlab :results none
  dt = m_ty(2, 3) - m_ty(1, 3);

  Fs = 1/dt;
  win = hanning(ceil(1*Fs));
#+end_src

First, we compute the transfer function estimate between the two geophones for the 3 experiments (figure [[fig:compare_tf_geophones]]). We also plot their coherence (figure [[fig:coherence_two_geophones]]).
#+begin_src matlab :results none
  [T_m_ty,  f] = tfestimate(m_ty(:, 1),  m_ty(:, 2),  win, [], [], Fs);
  [T_m_ry,  ~] = tfestimate(m_ry(:, 1),  m_ry(:, 2),  win, [], [], Fs);
  [T_ty_ry, ~] = tfestimate(ty_ry(:, 1), ty_ry(:, 2), win, [], [], Fs);
#+end_src

#+begin_src matlab :results none
  figure;
  ax1 = subplot(2, 1, 1);
  hold on;
  plot(f, abs(T_m_ty),  'DisplayName', 'Marble - Ty');
  plot(f, abs(T_m_ry),  'DisplayName', 'Marble - Ry');
  plot(f, abs(T_ty_ry), 'DisplayName', 'Ty - Ry');
  hold off;
  set(gca, 'xscale', 'log'); set(gca, 'yscale', 'log');
  set(gca, 'XTickLabel',[]);
  ylabel('Magnitude');
  legend('Location', 'northwest');

  ax2 = subplot(2, 1, 2);
  hold on;
  plot(f, mod(180+180/pi*phase(T_m_ty),  360)-180);
  plot(f, mod(180+180/pi*phase(T_m_ry),  360)-180);
  plot(f, mod(180+180/pi*phase(T_ty_ry), 360)-180);
  hold off;
  set(gca, 'xscale', 'log');
  ylim([-180, 180]);
  yticks([-180, -90, 0, 90, 180]);
  xlabel('Frequency [Hz]'); ylabel('Phase');

  linkaxes([ax1,ax2],'x');
  xlim([10, 500]);
#+end_src

#+NAME: fig:compare_tf_geophones
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/compare_tf_geophones.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:compare_tf_geophones
#+CAPTION: Transfer function from the first geophone to the second geophone for the three experiments
#+RESULTS: fig:compare_tf_geophones
[[file:figs/compare_tf_geophones.png]]


#+begin_src matlab :results none
  [coh_m_ty,  f] = mscohere(m_ty(:, 1),  m_ty(:, 2),  win, [], [], Fs);
  [coh_m_ry,  ~] = mscohere(m_ry(:, 1),  m_ry(:, 2),  win, [], [], Fs);
  [coh_ty_ry, ~] = mscohere(ty_ry(:, 1), ty_ry(:, 2), win, [], [], Fs);
#+end_src

#+begin_src matlab :results none :exports none
  figure;
  hold on;
  plot(f, coh_m_ty,  'DisplayName', 'Marble - Ty');
  plot(f, coh_m_ry,  'DisplayName', 'Marble - Ry');
  plot(f, coh_ty_ry, 'DisplayName', 'Ty - Ry');
  hold off;
  set(gca, 'xscale', 'log');
  xlabel('Frequency [Hz]'); ylabel('Coherence');
  ylim([0, 1]); xlim([1, 500]);
#+end_src

#+NAME: fig:coherence_two_geophones
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/coherence_two_geophones.pdf" :var figsize="wide-normal" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:coherence_two_geophones
#+CAPTION: Coherence between the two geophones for the three experiments
#+RESULTS: fig:coherence_two_geophones
[[file:figs/coherence_two_geophones.png]]

** Conclusion
#+begin_important
  These measurements are not relevant.
#+end_important

* Effect of the Ty Control System on the vibration of the Sample :noexport:ignore:
** Experimental Setup
One geophone is on the marble, the other at the sample location (see figures [[fig:setup_ty]]).

The signal from the top geophone goes through the slip-ring.

#+name: fig:setup_ty
#+caption: Experimental Setup
#+attr_html: :width 500px
[[file:./img/IMG_20190430_112615.jpg]]

Two measurements are done:
| Setup                | Data File          |
|----------------------+--------------------|
| Control of Ty is on  | =mat/data_001.mat= |
| Control of Ty is off | =mat/data_002.mat= |

For each of the measurements, the data are:
| Variable | Description                                                        |
|----------+--------------------------------------------------------------------|
| =t=      | Time Vector                                                        |
| =x1=     | Voltage measured across the geophone placed on the marble          |
| =x2=     | Voltage measured across the geophone placed at the sample location |

Measurements are 50s long.

** Matlab Init                                              :noexport:ignore:
#+begin_src matlab :exports none :results silent :noweb yes :var current_dir=(file-name-directory buffer-file-name)
  <<matlab-init>>
#+end_src

** Load data
We load the data of the z axis of two geophones.
#+begin_src matlab :results none
  tyOn  = load('mat/data_001.mat', 't', 'x1', 'x2');
  tyOff = load('mat/data_002.mat', 't', 'x1', 'x2');
#+end_src

** Analysis - Time Domain
#+begin_src matlab :results none
  dt = tyOn.t(2)-tyOn.t(1);
  Fs = 1/dt;
#+end_src

#+begin_src matlab :results none
  figure;
  subplot(1, 2, 1);
  hold on;
  plot(tyOn.t, tyOn.x1, 'DisplayName', 'Ty ON - Marble');
  plot(tyOff.t, tyOff.x1, 'DisplayName', 'Ty OFF - Marble');
  hold off;
  legend();
  xlabel('Time [s]'); ylabel('Voltage [V]');
  xlim([0, 50]);

  subplot(1, 2, 2);
  hold on;
  plot(tyOn.t, tyOn.x2, 'DisplayName', 'Ty ON - Sample');
  plot(tyOff.t, tyOff.x2, 'DisplayName', 'Ty OFF - Sample');
  hold off;
  legend();
  xlabel('Time [s]'); ylabel('Voltage [V]');
  xlim([0, 50]);
#+end_src

#+NAME: fig:time_domain_effect_ty
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/time_domain_effect_ty.pdf" :var figsize="full-normal" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:time_domain_effect_ty
#+CAPTION: Effect of the Ty control system on the vibrations of the marble and sample
#+RESULTS: fig:time_domain_effect_ty
[[file:figs/time_domain_effect_ty.png]]

** Analysis - Frequency Domain
#+begin_src matlab :results none
  Fs = 1/dt;
  win = hanning(ceil(10*Fs));
#+end_src

#+begin_src matlab :results none
  [pxOn1, f] = pwelch(tyOn.x1, win, [], [], Fs);
  [pxOn2, ~] = pwelch(tyOn.x2, win, [], [], Fs);

  [pxOff1, ~] = pwelch(tyOff.x1, win, [], [], Fs);
  [pxOff2, ~] = pwelch(tyOff.x2, win, [], [], Fs);
#+end_src

#+begin_src matlab :results none
  figure;
  subplot(1, 2, 1);
  hold on;
  plot(f, sqrt(pxOn1), 'DisplayName', 'Ty ON - Marble');
  plot(f, sqrt(pxOff1), 'DisplayName', 'Ty OFF - Marble');
  hold off;
  legend();
  set(gca, 'xscale', 'log'); set(gca, 'yscale', 'log');
  xlim([0.1, 500]); ylim([1e-4, 1]);
  xlabel('Frequency [Hz]'); ylabel('Amplitude Spectral Density $\left[\frac{V}{\sqrt{Hz}}\right]$')

  subplot(1, 2, 2);
  hold on;
  plot(f, sqrt(pxOn2), 'DisplayName', 'Ty ON - Sample');
  plot(f, sqrt(pxOff2), 'DisplayName', 'Ty OFF - Sample');
  hold off;
  legend();
  set(gca, 'xscale', 'log'); set(gca, 'yscale', 'log');
  xlabel('Frequency [Hz]'); ylabel('Amplitude Spectral Density $\left[\frac{V}{\sqrt{Hz}}\right]$')
  xlim([0.1, 500]); ylim([1e-4, 1]);
#+end_src

#+NAME: fig:psd_effect_ty
#+HEADER: :tangle no :exports results :results value raw replace :noweb yes
#+begin_src matlab :var filepath="figs/psd_effect_ty.pdf" :var figsize="full-tall" :post pdf2svg(file=*this*, ext="png")
  <<plt-matlab>>
#+end_src

#+NAME: fig:psd_effect_ty
#+CAPTION: Amplitude Spectral Density - Effect of the Ty control system
#+RESULTS: fig:psd_effect_ty
[[file:figs/psd_effect_ty.png]]

** Conclusion