Music/Sound Configuration

ncmpcpp_directory = ~/.config/ncmpcpp

mpd_host = localhost
mpd_port = 6600

mpd_music_dir = ~/Music

execute_on_song_change = dunstify --replace=19845 "Now Playing ♫" "$(mpc current)"

def_key "g"
  move_home
def_key "G"
  move_end
def_key "j"
  scroll_down
def_key "k"
  scroll_up
def_key "ctrl-u"
  page_up
def_key "ctrl-d"
  page_down
def_key "l"
  enter_directory
def_key "h"
  jump_to_parent_directory
def_key "."
  show_lyrics
def_key "n"
  next_found_item
def_key "N"
  previous_found_item
def_key "J"
  move_sort_order_down
def_key "K"
  move_sort_order_up
def_key "d"
  delete_playlist_items
def_key "+"
  volume_up
def_key "-"
  volume_down

music_directory     "~/Music"
playlist_directory      "~/.config/mpd/playlists"
db_file         "~/.config/mpd/database"
log_file            "~/.config/mpd/log"
pid_file            "~/.config/mpd/pid"
state_file          "~/.config/mpd/state"

# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
#
#user               "nobody"
#
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#
#group              "nogroup"
#
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon. Not effective if
# systemd socket activiation is in use.
#
# For network
#bind_to_address        "any"
#
# And for Unix Socket
#bind_to_address        "~/.mpd/socket"
#
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#
#port               "6600"
#
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#
#log_level          "default"
#
# Setting "restore_paused" to "yes" puts MPD into pause mode instead
# of starting playback after startup.
#
#restore_paused "no"
#
# This setting enables MPD to create playlists in a format usable by other
# music players.
#
#save_absolute_paths_in_playlists   "no"
#
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. The complete list of possible values can be
# found in the user manual.
#metadata_to_use    "artist,album,title,track,name,genre,date,composer,performer,disc"
#
# This example just enables the "comment" tag without disabling all
# the other supported tags:
#metadata_to_use "+comment"
#
# This setting enables automatic update of MPD's database when files in
# music_directory are changed.
#
#auto_update    "yes"
#
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself.  There is no limit by default.
#
#auto_update_depth "3"
#

# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#
#follow_outside_symlinks    "yes"
#
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#
#follow_inside_symlinks     "yes"
#

# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#
#zeroconf_enabled       "yes"
#
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network. %h will be replaced with the hostname.
#
#zeroconf_name          "Music Player @ %h"
#

# If this setting is set, MPD will require password authorization. The password
# setting can be specified multiple times for different password profiles.
#
#password                        "password@read,add,control,admin"
#
# This setting specifies the permissions a user has who has not yet logged in.
#
#default_permissions             "read,add,control,admin"
#

#database {
#       plugin "proxy"
#       host "other.mpd.host"
#       port "6600"
#}

input {
        plugin "curl"
#       proxy "proxy.isp.com:8080"
#       proxy_user "user"
#       proxy_password "password"
}

# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
#
# An example of an ALSA output:
#
#audio_output {
#    type       "alsa"
#    name       "My ALSA Device"
#    period_time "50000"
##  device      "hw:0,0"    # optional
##  mixer_type      "hardware"  # optional
##  mixer_device    "default"   # optional
##  mixer_control   "PCM"       # optional
##  mixer_index "0"     # optional
#}

# For NCMPCPP Visualizer
audio_output {
       type            "fifo"
       name            "Visualizer feed"
       path            "/tmp/mpd.fifo"
       format          "44100:16:2"
}

#
# An example of an OSS output:
#
#audio_output {
#   type        "oss"
#   name        "My OSS Device"
##  device      "/dev/dsp"  # optional
##  mixer_type      "hardware"  # optional
##  mixer_device    "/dev/mixer"    # optional
##  mixer_control   "PCM"       # optional
#}
#
# An example of a shout output (for streaming to Icecast):
#
#audio_output {
#   type        "shout"
#   encoder     "vorbis"        # optional
#   name        "My Shout Stream"
#   host        "localhost"
#   port        "8000"
#   mount       "/mpd.ogg"
#   password    "hackme"
#   quality     "5.0"
#   bitrate     "128"
#   format      "44100:16:1"
##  protocol    "icecast2"      # optional
##  user        "source"        # optional
##  description "My Stream Description" # optional
##  url     "http://example.com"    # optional
##  genre       "jazz"          # optional
##  public      "no"            # optional
##  timeout     "2"         # optional
##  mixer_type      "software"      # optional
#}
#
# An example of a recorder output:
#
#audio_output {
#   type        "recorder"
#   name        "My recorder"
#   encoder     "vorbis"        # optional, vorbis or lame
#   path        "/var/lib/mpd/recorder/mpd.ogg"
##  quality     "5.0"           # do not define if bitrate is defined
#   bitrate     "128"           # do not define if quality is defined
#   format      "44100:16:1"
#}
#
# An example of a httpd output (built-in HTTP streaming server):
#
#audio_output {
#   type        "httpd"
#   name        "My HTTP Stream"
#   encoder     "vorbis"        # optional, vorbis or lame
#   port        "8000"
#   bind_to_address "0.0.0.0"       # optional, IPv4 or IPv6
##  quality     "5.0"           # do not define if bitrate is defined
#   bitrate     "128"           # do not define if quality is defined
#   format      "44100:16:1"
#   max_clients "0"         # optional 0=no limit
#}
#
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#
audio_output {
  type      "pulse"
  name      "My Pulse Output"
#  server   "localhost"     # optional
#   sink        "remote_server_sink"    # optional
}
#
# An example of a winmm output (Windows multimedia API).
#
#audio_output {
#   type        "winmm"
#   name        "My WinMM output"
##  device      "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
#       or
##  device      "0"     # optional
##  mixer_type  "hardware"  # optional
#}
#
# An example of an openal output.
#
#audio_output {
#   type        "openal"
#   name        "My OpenAL output"
##  device      "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
#}
#
# An example of an sndio output.
#
#audio_output {
#   type        "sndio"
#   name        "sndio output"
#   mixer_type  "hardware"
#}
#
# An example of an OS X output:
#
#audio_output {
#   type        "osx"
#   name        "My OS X Device"
##  device      "Built-in Output"   # optional
##  channel_map      "-1,-1,0,1"    # optional
#}
#
## Example "pipe" output:
#
#audio_output {
#   type        "pipe"
#   name        "my pipe"
#   command     "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
#   command     "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
#   command     "nc example.org 8765"
#   format      "44100:16:2"
#}
#
## An example of a null output (for no audio output):
#
#audio_output {
#   type        "null"
#   name        "My Null Output"
#   mixer_type      "none"          # optional
#}
#

# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album", "track" or "auto". "auto" is a special mode that
# chooses between "track" and "album" depending on the current state of
# random playback. If random playback is enabled then "track" mode is used.
# See <http://www.replaygain.org> for more details about ReplayGain.
# This setting is off by default.
#
#replaygain         "album"
#
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#
#replaygain_preamp      "0"
#
# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
# By default this setting is disabled.
#
#replaygain_missing_preamp  "0"
#
# This setting enables or disables ReplayGain limiting.
# MPD calculates actual amplification based on the ReplayGain tags
# and replaygain_preamp / replaygain_missing_preamp setting.
# If replaygain_limit is enabled MPD will never amplify audio signal
# above its original level. If replaygain_limit is disabled such amplification
# might occur. By default this setting is enabled.
#
#replaygain_limit       "yes"
#
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#
#volume_normalization       "no"
#

# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
#
#filesystem_charset     "UTF-8"