From 018bc6044dcfce9fa6e4f7fc7a52f0b7e8dfb0be Mon Sep 17 00:00:00 2001
From: Thomas Dehaeze <dehaeze.thomas@gmail.com>
Date: Fri, 8 Jan 2021 00:04:24 +0100
Subject: [PATCH] Simplify MPV config

automatic put video on screen corner
---
 i3.org    |  1 +
 video.org | 99 ++++++-------------------------------------------------
 2 files changed, 11 insertions(+), 89 deletions(-)

diff --git a/i3.org b/i3.org
index e62f876..5c70995 100644
--- a/i3.org
+++ b/i3.org
@@ -131,6 +131,7 @@ To display names or symbols instead of plain workspace numbers you can use somet
   for_window [class="Floating"] floating enable, resize set 800 600, move position 1100 460
   for_window [class="Sxiv"] floating enable, resize set 800 600, move position center
   for_window [title="nmtui"] floating enable, resize set 800 600
+for_window [class="mpv"] floating enable
 #+end_src
 
 * Scratchpad
diff --git a/video.org b/video.org
index 187497f..1ff434a 100644
--- a/video.org
+++ b/video.org
@@ -7,103 +7,24 @@
 :header-args+: :comments both :mkdirp yes
 :END:
 
-** Video settings
 #+begin_src conf
-# Start in fullscreen mode by default.
-#fs=yes
-
-# force starting with centered window
-#geometry=50%:50%
+# When Floating, put MPV on the bottom right corner
+geometry=99%:98%
 
 # don't allow a new window to have a size larger than 90% of the screen size
-#autofit-larger=90%x90%
+autofit-larger=40%x40%
 
-# Do not close the window on exit.
-#keep-open=yes
-
-# Do not wait with showing the video window until it has loaded. (This will
-
-# resize the window once video is loaded. Also always shows a window with
-# audio.)
-#force-window=immediate
-
-# Disable the On Screen Controller (OSC).
-#osc=no
-
-# Keep the player window on top of all other windows.
-#ontop=yes
-
-# Specify high quality video rendering preset (for --vo=gpu only)
-# Can cause performance problems with some drivers and GPUs.
-#profile=gpu-hq
-
-# Force video to lock on the display's refresh rate, and change video and audio
-# speed to some degree to ensure synchronous playback - can cause problems
-# with some drivers and desktop environments.
-#video-sync=display-resample
-
-# Enable hardware decoding if available. Often, this does not work with all
-# video outputs, but should work well with default settings on most systems.
-# If performance or energy usage is an issue, forcing the vdpau or vaapi VOs
-# may or may not help.
-#hwdec=auto
-#+end_src
-
-** Audio settings
-#+begin_src conf
-# Specify default audio device. You can list devices with: --audio-device=help
-# The option takes the device string (the stuff between the '...').
-#audio-device=alsa/default
-
-# Do not filter audio to keep pitch when changing playback speed.
-#audio-pitch-correction=no
-
-# Output 5.1 audio natively, and upmix/downmix audio with a different format.
-#audio-channels=5.1
-# Disable any automatic remix, _if_ the audio output accepts the audio format.
-# of the currently played file. See caveats mentioned in the manpage.
-# (The default is "auto-safe", see manpage.)
-#audio-channels=auto
-#+end_src
-
-** Other settings
-#+begin_src conf
-# Pretend to be a web browser. Might fix playback with some streaming sites,
-# but also will break with shoutcast streams.
-#user-agent="Mozilla/5.0"
-
-stop-screensaver = "yes"
+# Do not run the screensaver when playing videos
+stop-screensaver="yes"
 
+# Automatically load subtitle file with filename same to the video
 sub-auto=fuzzy
 
-# cache settings
-#
-# Use 150MB input cache by default. The cache is enabled for network streams only.
-#cache-default=153600
-#
-# Use 150MB input cache for everything, even local files.
-#cache=153600
-#
-# Disable the behavior that the player will pause if the cache goes below a
-# certain fill size.
-#cache-pause=no
-#
-# Read ahead about 5 seconds of audio and video packets.
-#demuxer-readahead-secs=5.0
-#
-# Raise readahead from demuxer-readahead-secs to this value if a cache is active.
-#cache-secs=50.0
+# Display French subtitles if available.
+slang=fr
 
-# Display English subtitles if available.
-#slang=en
-
-# Play Finnish audio if available, fall back to English otherwise.
-#alang=fi,en
-
-# Change subtitle encoding. For Arabic subtitles use 'cp1256'.
-# If the file seems to be valid UTF-8, prefer UTF-8.
-# (You can add '+' in front of the codepage to force it.)
-#sub-codepage=cp1256
+# Play English audio if available, fall back to French otherwise.
+alang=en,fr
 #+end_src
 
 * =input.conf= - MPV Key Bindings