diff --git a/content/zettels/feedforward_control.md b/content/zettels/feedforward_control.md
index d4f1ed4..34d569c 100644
--- a/content/zettels/feedforward_control.md
+++ b/content/zettels/feedforward_control.md
@@ -7,18 +7,16 @@ draft = false
 Tags
 :
 
-Below, the "References" heading will be auto-inserted.
-
 Depending on the physical system to be controlled, several feedforward controllers can be used:
 
--   [sec:fourth_order_feedforward](#sec:fourth_order_feedforward)
--   [sec:model_based_feedforward](#sec:model_based_feedforward)
--   [sec:rigid-body-feedforward](#sec:rigid-body-feedforward)
+-   [sec-fourth_order_feedforward](#sec-fourth_order_feedforward)
+-   [sec-model_based_feedforward](#sec-model_based_feedforward)
+-   [sec-rigid-body-feedforward](#sec-rigid-body-feedforward)
 
 
 ## Rigid Body Feedforward {#rigid-body-feedforward}
 
-<a id="sec-rigid-body-feedforward"></a>
+<span id="sec-rigid-body-feedforward"></span>
 
 Second order trajectory planning: the acceleration and velocity can be bound to wanted values.
 
@@ -40,7 +38,7 @@ F\_{ff} = m a + c v
 
 <span id="sec-fourth-order-feedforward"></span>
 
-The main advantage of "fourth order feedforward" is that it takes into account the flexibility in the system (one resonance between the actuation point and the measurement point, see Figure [fig:feedforward_double_mass_system](#fig:feedforward_double_mass_system)).
+The main advantage of "fourth order feedforward" is that it takes into account the flexibility in the system (one resonance between the actuation point and the measurement point, see Figure [fig-feedforward_double_mass_system](#fig-feedforward_double_mass_system)).
 This can lead to better results than second order trajectory planning as demonstrated [here](https://www.20sim.com/control-engineering/snap-feedforward/).
 
 <a id="figure--fig:feedforward-double-mass-system"></a>
@@ -78,7 +76,7 @@ q\_3 &= (m\_1 + m\_2)c + k\_1 k\_2 + (k\_1 + k\_2) k\_{12} \\\\
 q\_4 &= (k\_1 + k\_2) c
 \end{align}
 
-This means that if a fourth-order trajectory for \\(x\_2\\) is used, the feedforward architecture shown in Figure [fig:feedforward_fourth_order_feedforward_architecture](#fig:feedforward_fourth_order_feedforward_architecture) can be used:
+This means that if a fourth-order trajectory for \\(x\_2\\) is used, the feedforward architecture shown in Figure [fig-feedforward_fourth_order_feedforward_architecture](#fig-feedforward_fourth_order_feedforward_architecture) can be used:
 
 \begin{equation}
 F\_{f2} = \frac{1}{k\_12 s + c} (q\_1 d + q\_2 j + q\_3 q + q\_4 v)
@@ -105,7 +103,7 @@ q\_4 &= c\_1 k
 
 and \\(s\\) the snap, \\(j\\) the jerk, \\(a\\) the acceleration and \\(v\\) the velocity.
 
-The same architecture shown in Figure [fig:feedforward_fourth_order_feedforward_architecture](#fig:feedforward_fourth_order_feedforward_architecture) can be used.
+The same architecture shown in Figure [fig-feedforward_fourth_order_feedforward_architecture](#fig-feedforward_fourth_order_feedforward_architecture) can be used.
 
 In order to implement a fourth order trajectory, look at [this](https://www.mathworks.com/matlabcentral/fileexchange/16352-advanced-setpoints-for-motion-systems) nice implementation in Simulink of fourth-order trajectory planning (see also (<a href="#citeproc_bib_item_1">Lambrechts, Boerlage, and Steinbuch 2004</a>)).